Battery checks say change battery, but it charges and works fine. Help?

Hey there,
Just having a problem with my Laptop battery. My product type is a HP G61 Notebook PC. The battery icon in the bottom left says the battery should be replaced, with checks saying it has reached the end of it's useful life.
I find this hard to believe since I've had the laptop a year and it still charges and works fine. I don't want to spend any unnecessary money at the moment so I'm not sure whether to wait and ignore it to see how it goes.
Suggestions?

Hi,
Jamie2812 wrote:
Hey there,
Just having a problem with my Laptop battery. My product type is a HP G61 Notebook PC. The battery icon in the bottom left says the battery should be replaced, with checks saying it has reached the end of it's useful life.
I find this hard to believe since I've had the laptop a year and it still charges and works fine. I don't want to spend any unnecessary money at the moment so I'm not sure whether to wait and ignore it to see how it goes.
Suggestions?
I suggest that you perform a calibration of your battery. 
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Problem HDMI connection to new Panasonic TC-60ps34 plasma; tv says no signal but computer detects tv; worked fine on 4 yr old phillips plasma; 2011 macbook pro running os10.6.8.

    New 60" Panasonic plasma says no signal won't display picture/sound from 2011 macbook pro running os10.6.8 connected via HDMI with moshi MDP to HDMI Adapter. Same setup on former 4-yr-old Phillips Plasma worked fine (but the tv died!)

    dohdoh1985 wrote:
    - I tried every Snow Leopard Release from 10.5.8 to 10.6.4
    Assuming this means the TV was not detected in any of these versions, this would not be a Snow Leopard installation or setup issue. I think that is what sig is trying to tell you.
    If this is true, you might want to post in the MacBook forums to see if anyone has a similar issue. It would be a good idea to post the model number of your Toshiba if you do so, as this might be relevant. Otherwise, it sounds like the problem is in the TV, since the MacBook works with other displays.
    Tip: to avoid unexpected formatting oddities that might make your posts hard to read, you can use the "Preview" tab before you post to see how your post will be formatted.
    Message was edited by: R C-R

  • HT5731 How do I make my Ipod touch work? When I try to purchase songs it ask me for my apple ID  password it tells me its wrong. I have reset it and changed it but it still wont work. Help!!

    Somebody Please help me to get my stupid Ipod to let me download music I just put a 15 dollar card on. I don't want to waste it.

    Can you go to Settings>iTunes and App Store and signout and sign back in?

  • Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

    Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
    It has only happened for the last month or so
    Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

    Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

  • TS1713 My battery is not charing. The cord charges other computers fine. Someone suggested it could be the DC-in board or the battery may be unplugged. I assume I open the bottom to either check the battery or install a new DC-in board?

    My battery is not charing. The cord charges other computers fine. Someone suggested it could be the DC-in board or the battery may be unplugged. I assume I open the bottom to either check the battery or install a new DC-in board? Any guidance for a way forward? Thank you.

    Hi peaceforyou!
    You may want to try resetting the System Management Controller on your computer in order to troubleshoot this issue a little further:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    You can also use the following article to troubleshoot your battery on your MacBook Pro:
    Mac notebooks: All about batteries
    http://support.apple.com/kb/ht1446
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Battery issues!! takes 6hrs to charge and runs out in less 2hrs

    I've had my laptop(unibody 2008 model) for 8 months now. I've noticed that battery life is so much shorter than the one I had before (early 2007 model)
    However, when i took it to apple service center they said there's nothing wrong with the numbers and it all looks normal. so i've just been using it since there was nothing i could do...
    Is it really normal for your battery to take more than 6 hours to charge?(all i did was web browsing)
    Also, NOW the battery runs out in less than 1hr and half...
    Full charge capacity (mAh): 3468
    Cycle count: 234
    Condition: Check Battery
    iStatPro says my battery health is 75%
    they guys at the apple center said that it's because my cycle counts are too high but come on! since my battery ran out in less than 2hrs 30mins from the beginning, I just had to charge it more often...
    this is something new that just started happening
    my laptop just shuts down the second it gives me the 10minute warning...
    Is there anything I can do so apple replaces my battery or am i just doomed to buy a new one?
    it's frustating how apple keeps saying there's nothing wrong with it..

    Apple rates your battery to retain 80% of its original Full Charge Capacity (4650 mAh) after 300 cycles:
    http://www.apple.com/batteries/notebooks.html
    Yours has only 75% of its original capacity after only 234 cycles and is now faulty — that's what the "Check Battery" notation in System Profiler indicates. Point this out to the manager of your local Apple Store and ask to have it replaced. If you don't get anywhere with the manager, call Apple Customer Relations at 1-800-767-2775 and make the same request, explaining that the store has failed to comply. Be polite, patient and calm at all times, and be explicit about your reasonable expectation that Apple will make good on what it says you can expect of your battery.

  • MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

    MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

    The firmware update corrects an error that may occur, however the techs would have checked the condition of the battery prior to installing a new one.  If the battery was questionable, the firmware update was really not too important.
    You can check the battery condition by going to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about Cycle Count, Condition, Capacity: Condition anything but Normal needs to be checked and may need to be replaced.
    The cycle count of 1,000 charge cycles is the typical life of a Lithium-Ion battery, the point at which the capacity drops to 80% of the as built capacity.

  • My macbook pro doesn't charge or operate when the battery is connected. When I remove it, it works fine only with the charger only

    My laptop is a macbook pro 13 (mid 2010).  When the battery is connected on it, the light of the magsafe adapter does not turn on, and the laptop neither. I shall note that the computer was operating normally before the battery was totally empty. I removed the battery and it operates normally. When I put it back, it's again dead, neither charges the battery, nor starts up.
    What do you think is the problem about?

    Thanks for your response! Resetting the SMC does not change anything.
    More information: I used another MagSafe charger and it worked with the battery connected, like nothing happened. I run the apple hardware test and it showed that everything is ok! I would replace my MagSafe adapter, but except that it works fine without the battery, it also works fine on another macbook pro. I am confused! Any more advice please??

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger

    I plug my ipod in, and it says it needs to be charged and never charges or shows up on my computer. But it works in the charger. I cannot sync it, and the computer doesn't detect it. It charges in the charger, but as soon as you unplug it, the ipod shuts off. Doesn't charge in the computer at all.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

    I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

    Are you using the Adjust Date and Time option or the Batch Change option?  If it's the former try the latter.  If you get the same results  launch iPhoto with the Option key held down and create a new, test library.  Import  the same video file and check to see if the same problem persists.
    OT

  • The battery of my macbook pro will not charge and the LED light is only green. What to do?

    the battery of my macbook pro will not charge and the LED light is only green. What to do?

    This might help:
    Intel-based Macs: Resetting the System Management Controller ...
    Otherwise, you should probably take your computer in to a service place to be tested, since there a a few possible causes of this behavior.

  • Battery indicator saying no battery available

    Battery indicator saying no battery available

    Could well be:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Resetting your Mac's PRAM and NVRAM

  • My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

    My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?

    you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
    next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
    once you remove all of these airport passwords, quit the keychain
    turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue!

  • My i pod shows my charger and itunes so i download i tunes. But itunes said i had to do my passcode but the charger and itunes symbol wont go away long enough for me to enter my passcode! what do i do?

    My ipod shows my charger and itunes, so i download itunes. But then itunes says i musst enter my passcode on my i pod but the charger and itunes symbols wont go away long enough for me to enter my passcode. what should i do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Maybe you are looking for

  • Ubuntu Problem in Pavillion dv6 3208-tx Notebook PC

    I own an HP dv6 3208-tx Notebook PC. I installed Ubuntu 11.04 recently and I'm facing the following problem. From the bootloader, when I select Ubuntu, it doesn't load. It gets stuck at a black screen without any cursor. If I go to Windows and turn o

  • ADF BC 组件的运行时介绍 -1 Application Module的状态管理

    原文连接 [ADF BC 组件的运行时介绍 -1 Application Module的状态管理|http://blog.csdn.net/genexujin/article/details/7086679] ADF BC 框架中提供了开箱即用的应用‘状态管理’的功能.所谓状态管理,英文就是State Management,指的是维护用户在使用应用系统时的会话状态.概念上可能会和Http Session对象混淆.ADF BC提供状态管理是独立于Http Session机制的,自成体系的一个机制.

  • Auto Generate Purchase Orders

    Am currently testing ahead of a migration to SAP. Have created a sales order for an item. This item has supplier information entered. Then tried to use mrp wizard to create a scenario followed by order recommendations but am getting no results in ter

  • Framesets in Web Dynpro for Abap

    Hi all, I have a question concerning framesets in Web Dynpro for Abap. Today we have a BSP application with 3 framesets: a header-view, a navigation-view and a main view. We'd like to create the same application in Web Dynpro for Abap. I know this is

  • Significance of bsize in VxFS

    My Veritas file system is set up with 1k block size. However my Oracle blocks are 8k. Will I get a significant improvement by recreating the file system using 8k blocks? If yes, please explain why as detailed as possible.