Battery compatibility between X31s and X61s

Hi!
I own a X31s and X61s, and would like have a spare battery handy for travel. Before placing the order, I am wondering if the following battery can be used on both:
* ThinkPad X60s Series 4 Cell Slim Line Battery
It is not cheap, so I would like to think twice before buying. Somehow I cannot find any information on the compatibility issue. Thank you for your help!
Jenny

jennyumaa, welcome to the forum,
unfortunately the batteries are definitely not interchangeable between X31 and X61 systems.
Sorry
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Battery Compatability between Vado and Vado HD

Creative have been pushing battery and charger bundles here in the UK for January sales. I ordered one such bundle but have now discovered a reference on the US site to the Vado battery not being compatible with the Vado HD. There was no such warning on the UK site so have I ordered a battery and charger that is unsuitable for my Vado HD (still awaiting deli'very of this as well)?
There is no other charger or battery listed on the UK site anyway!
Cheers!
Andy

That was how I have been thinking too. I cant see that if both batteries (no matter what L-Ion cells are inside), if the voltage rating is the same and the connections are the same and it fits inside the 9.5mm bay, that it really should just work. It was the IBM/Lenovo documentation that is sort of incomplete on compatability that cast the doubt. No matter how I've looked at it, it all cross-references to work through the X6 reference and Ultrabay Slim. I just dont want to spend the money, get it, send it back, and pay 2 shipping charges and 15% restocking on a hunch without doing the proper research and at least asking experienced people about it first.
I thank you for all your insight and help. You have made me more at ease about ordering the battery. When I get it, regardless if it works, I will post on this topic for all to see.
This other site really did help on Ultrabay compatability, but it just wasnt official:
http://www.thinkwiki.org/wiki/UltraBay
See you when I get the battery!
Vanman

Ultra Bay Slim battery compatability between X4 and X6 UltraBase.

I have an X41 with an X4 Ultrabase. I have 2 existing batteries for the Ultrabay Slim.
One is FRU-08K8191, the other is FRU-41A4118. Both are 10.8V and 2.2Ah and as far as looks and operability, and I cannot tell the difference other than the FRU number. Both are also discontinued according to Lenovo.
I need to replace one of them as it has lost 45% of its life through time and usage.
All I can find to replace it is FRU-08K8190, but that is 10.8v and 1.5Ah.
Calculated out, my battery with 55% remaining capacity is about 1.2Ah capacity, almost doesnt make sense to replace it with a 1.5Ah. I dont think I will be gaining anything worth the $119.00 plus shipping to buy it.
I do see that Lenovo/IBM has a battery FRU-43R9250 that is "supposed" to work with the X6 Ultrabase and also the T60, R60, Z60, but has no listing to be compatable with the X4.
This battery is rated at 10.8v and 2.7Ah. Much better battery IF it will work.
All of the batteries I have mentioned seem to all be the 9.5mm thickness. I dont know about PIN placements however.
After exhausting resources at Lenovo tech support and Shop Lenovo and getting no answers, I found this site.
What I am asking is:
1) Does anyone here know it the X4 and the X6 Ultrabay's are compatable as far as batteries are concerned?
2) Maybe if someone here has one or the other or both, can you tell me which battery you use and the ratings of it?
3) Also, if anyone has already tried out this FRU-43R9250 in an X4, or any battery from an X6 into an X4? Does it work?
Link to the 43R9250 battery:
http://shop.lenovo.com/SEUILibrary/controller/e/web/LenovoPortal/en_US/catalog.workflow:item.detail?...
Another link to a WIKI site about all the history of the Ultrabay's, that through much research, says that it may work:
http://www.thinkwiki.org/wiki/UltraBay
Thanks all, and have a great rest of your weekend!
Vanman

That was how I have been thinking too. I cant see that if both batteries (no matter what L-Ion cells are inside), if the voltage rating is the same and the connections are the same and it fits inside the 9.5mm bay, that it really should just work. It was the IBM/Lenovo documentation that is sort of incomplete on compatability that cast the doubt. No matter how I've looked at it, it all cross-references to work through the X6 reference and Ultrabay Slim. I just dont want to spend the money, get it, send it back, and pay 2 shipping charges and 15% restocking on a hunch without doing the proper research and at least asking experienced people about it first.
I thank you for all your insight and help. You have made me more at ease about ordering the battery. When I get it, regardless if it works, I will post on this topic for all to see.
This other site really did help on Ultrabay compatability, but it just wasnt official:
http://www.thinkwiki.org/wiki/UltraBay
See you when I get the battery!
Vanman

Optimizing iPhone battery life: Between charges and before replacement

FYI. An excellent iPhone battery care article by iPhoneAtlas.com:
Optimizing iPhone battery life: Between charges and before replacement
http://www.iphoneatlas.com/2007/07/09/optimizing-iphone-battery-life-between-cha rges-and-before-replacement/

OK, I agree that is a completely false statement. The rest of the article is pretty good.
If you assume a linear decrease in battery charge for each full cycle (which it really isn't, but much easier to model in a spreadsheet). Then 80% of original charge after 400 full cycles is approximately 0.8% loss in battery charge per full charge cycle (again this is a simplification, stay with me). This means that after 400 cycles, you are at approximately 80% of your original total charge level. As stated by Apple.
So, extrapolating that out to EOL (end of life) which Apple assumes to be 50% battery charge, it would take approximately 1,000 full charge cycles for your battery to be EOL (according to Apple). It would actually be slightly less than that since it won't be a linear function.
For me, that's 2 to 4 years of use depending on whether or not I continue using the iPhone as much as I have this first full week.

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

Compatability between LaCie and other drives

Greetings Kind MacAddicts!
I have a 160GB LaCie (Triple Threat?) FW800 external drive and have had no problems. Now I want to expand and daisychain another external drive. Thinking of a Maxtor with FW800 (more bang for the buck) and wondering if there are any known compatability issues between LaCie and Maxtor, or btw Maxtor and the new Intel processors. Suggestions?

Well that drive inside the LaCie casing could very well be a Maxtor drive too :P
Remember LaCie don't actually make Hard Drives, they just put drives from other manufacturers in their external casings and charge a premium.
Yes, some of their designs look nice

Compatibility between Yosemite and Photoshop / Bridge CS5.

I am concerned about the possibility of incompatibility between Yosemite and Photoshop / Bridge CS5 so have delayed updating my Mac. Has anyone updated, experienced problems and found solutions? What does Adobe have to say in this regard?

I'm not sure I know enough to answer the question.
The images are on my G5 on a second internal hard drive (not the boot drive).
They are in a folder with a lot of images from the same shoot.
That folder shows up in the Library in Aperture, also. I think I imported them. But, as best I can tell, they do not "only exist in Aperture" because I can see them, and their .xmp files in the original file on the second internal hard drive.
Thank you so much for trying to help.
sjh

Issue with VPN compatibility between 2811 and 2911

hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
Thanks

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

USB Flash Drive Compatibility between Mac and PC?

Hi,
I own an iMac 2 GHz Intel Core 2 Duo 1 GB 667 MHz DDR2 SDRAM and just got a new job where I'm using a PC. At work they all use flash drives to transfer data back and forth to computers etc. Would a flash drive (let's say a Kensington since that's the brand I've seen the most at work) that works in a PC at work be compatible with my iMac at home. I know Kensington makes them compatible for Mac and PC but just wondering how the data would transfer onto my Mac. Is it readable, does it depend what I'm transferring over?
Message was edited by: spiralgirl

{quote} guy there said they haven't yet perfected the flash drives to switch between Mac and PC and work well so I was a little surprised at this. {quote}
That is pretty much a standard reply you get from someone that doesn't know anything about macs. I've used those things for years without any problems, but I have been using my ipod as a disk lately because I always have it with me. It's also another less thing I have to buy and carry around.

Compatibility between CF7 and CF10

Hi
We currently have two load-balanced servers running CF7 Enterprise Edition. The applications use the Client Variable store, so that we can move users between servers as necessary (should one become busy / unavailable).
We now want to add a third server into the cluster. This will have to be CF10 Enterprise Edition.
Does anyone know if the Client Variable store operates in the same way, or am I likely to have problems if I try and add this to the cluster? Also, can anyone point me in the direction of looking at which CF tags (or tag attributes) have been deprecated between 7 and 10?
Thanks
Karl

I don't think you will find a list of differences between CF 7 and CF 10 from Adobe. Maybe someone out there has compiled a list???? More likely you will need to read the release notes from each version and determine that way.
ColdFusion release notes - http://www.adobe.com/support/documentation/en/coldfusion/releasenotes.html

File compatibility between cs3 and cs5

Hi,
What are the compatilibity issues between Photoshop CS3 and CS5? Can they be used together without much (if any) issues?
Thanks.

They can happily coexist on the same system, as long as you've got the disk space. Photoshop has always been like that.
You'll only be able to run one at a time, at any given instant, though.
Regarding file compatibility, I don't how much it's required to open a file in Photoshop CS3, but the newer version does offer a "Maximize Compatibility" preference setting for saving .psd files. On occasion I've opened .psd files in Photoshop CS3 saved by CS5 (using the aforementioned setting) and I haven't seen any issues at all.
-Noel

Compatibility between CS3 and earlier versions?

As the web developer I have Contribute version 3, but some of
my new clients
will be buying the latest Contribute CS3 to update their site
pages. Can I
still set up their roles and editing rights for a site and
create a
connection key to send to them that will work for them in
Contribute CS3
without difficulty? And can either of us still edit the site
pages,
regardless of the fact that we are each using different
versions of
Contribute?
In conclusion, are there any backward compatibility issues I
should be aware
of between the newer version and older versions of CS3 when
administering,
and connecting to, the same website?
Thanks in advance.
(Please reply to forum. E-mail address is bogus to prevent
spam)

Thanks for the advice.
"ThinkInk" <[email protected]> wrote in
message
news:f0sa43$dvh$[email protected]..
>I had the same problem when C4 arrived and I could'nt
purchase C3 for my
> clients.
>
> The key is to use Transitional Mode (adminstrator
settings,
> compatibility),
> here's wat the HELP says:
>
> --------------------------
> Enabling compatibility with older versions of Contribute
> Contribute 4 offers administrators two compatibility
options--one that
> allows
> users with earlier versions to work on the website, and
one that does not:
>
> Transition Mode
> In this mode, users of earlier versions of Contribute
can continue working
> on
> the website, along with Contribute 4 users. This lets
you evaluate the new
> version and set up new roles and permissions without
disrupting users with
> earlier versions of Contribute.
>
> Compatibility Mode
> In this mode, all users must use Contribute 4. Users
with earlier versions
> cannot work on the website.
>
> Contribute 4 starts in Transition mode by default when
you migrate from
> Contribute 3. Use this mode temporarily; when you?re
ready, transition all
> users to Contribute 4 and enable Compatibility Mode.
>
> To enable Compatibility Mode:
> In Contribute 4, select Edit > Administer Websites,
and then select a
> website.
> The Administer Website dialog box appears.
>
> Select Compatibility from the category list on the left.
> The Compatibility options appear in the Administer
Website dialog box.
>
> Select Compatibility, and then click Close.
> After you enable Compatibility Mode, all users connected
to the website
> must
> use Contribute 4.
>
> ------------------------
>
> It's really better to upgrade yourself to the newest
version, so you know
> what
> extra options your clients have and you can support
them. I managed to get
> both
> C3 en C4(I purchased the upgrade) running on my PC, so
maybe that's also
> an
> option.
>
> grtz. Hayo
>

Backwards compatibility between DWCS3 and DW8

I am purchasing the CS3 Web premium and plan to only install
in on the new desktop I will purchase. Most of my design work will
be done on that system but I will occasionally need to work on
files when traveling on my laptop which will only have DW8 (not
upgrading that system just yet). Will there be any compatibility
issues in working on the same file between both versions, or am I
stuck only working on the desktop?
Dara

I don't see any problem with compatibility if they are static
pages and you
haven't used any of the newer features from CS3 like Spry for
example.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"Dara_BSI" <[email protected]> wrote in
message
news:f3o93g$ert$[email protected]..
>I am purchasing the CS3 Web premium and plan to only
install in on the new
> desktop I will purchase. Most of my design work will be
done on that
> system but
> I will occasionally need to work on files when traveling
on my laptop
> which
> will only have DW8 (not upgrading that system just yet).
Will there be any
> compatibility issues in working on the same file between
both versions, or
> am I
> stuck only working on the desktop?
>
> Dara
>

Compatibility between 1131AG and 1420

Are there compatibility issues between a AIR-AP1131AG-A-K9 and 1420 series Lwapp, with b/g and a dipole antennas? I've read they are incompatible. Is there any documentation on the Cisco site that addresses this?

If you are talking about using the external antenna of the 1420 for the 1131, there sure is. The 1130 series AP has INTERNAL antenna.

Compatability between cloud and non-cloud versions

I'm pretty sure there will be no compatability problems between the same versions of cloud and non-cloud products. But what about the feature updates that are mentioned as a benefit of the cloud products. How do they effect the file format. Does it depend on whether or not I use a certain feature? Will these updates only provide features that don't change the file format? For example: If I have version 6.0 of non-cloud InDesign on one computer and 6.? of cloud InDesign with some new feature that hasn't made it into the non-cloud release yet, can I save a file with the cloud version and open it with the non-cloud version?

Hi ,
We really apologize for all the inconvenience which has caused you.
Yes you can open the files from recent version into 1 or in some cases 2 versions back by following the different workflows for each program
For example in In Design you can save the file as IDML and open in the previous version.
In the meanwhile if these steps doesnt resolve your issues you can contact Adobe support by following the link below:
http://helpx.adobe.com/contact/
Thanks
Mandhir

Battery compatibility between X31s and X61s

Similar Messages

Maybe you are looking for