Battery dead on ipod nano (2nd generation) What do I do?

Dead battert on my ipod nano (2nd generation) What do I do? Should I get it replaced or just buy a new one?

You have 1 of three routes if you want to get it replaced. Whether or not it is worth it is entirely up to you.
1) Have Apple replace the battery in it for a flat fee.  See this page for pricinghttp://www.apple.com/support/ipod/service/prices/ and this page for setting up the service request. http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
2) Locate and utiltize a third party service (there may even be some shops/service centers in your area).  I have no suggestions as to which one is better than another, so for now you'll have to Google for "iPod battery replacement" and you should get a number of results. This is slightly cheaper than the Apple route although a bit riskier in terms of having the job done right.
3) If you consider yourself handy with small electronics you can purchase a new battery from an online retailer and use one of the numerous guides online to swap it out yourself.  I usually stick with http://www.ifixit.com for parts and step-by-step guides. Of course this route is the cheapest, but is the most difficult.
B-rock

Similar Messages

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • The screen on my ipod nano 2nd generation turns black. It still plays music. I've tried resetting the ipod to clear the black screen and the screen goes back to it's normal state but after a few minutes the screen goes black again.

    The screen on my ipod nano, 2nd generation, turns black. It stills plays music. I've tried resetting the ipod to clear the black and the screen goes back to it's original state. But after a few minutes the screen turns black again, while the music is still playing. What can I do about this?

    That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
    B-rock

  • White screen on iPod nano 2nd generation

    I get a white screen on my iPod nano 2nd generation.  iPod still plays but I can't see what's on screen to control it.  Do I need a new battery?

    Hi mmeves,
    Any luck ? I have got the same problem with my iPod nano too.
    I tried resetting but in vain!
    Pl. let me know if you could get yours fixed
    rgds
    Mahesh

  • I have an ipod nano 2nd generation with a non responsive click wheel

    I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
    The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
    I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

    You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

  • My ipod nano 2nd generation turn off by itself

    my ipod nano 2nd generation turn off by itself and when i unplug the USB cable and i plug it again its shows sign do not disconnect then its shows battery low and it turn off again i bought it since 2 and every time i go to the shop to repair it he told me that i don't have the parts to repair it please help any ideas ? thanks

    Try calling the apple customer service maybe they will hel you. 1-800-my-apple(this is the phone number) By the way this problem is very weird. You should call.

  • HT5610 is ipod nano 2nd generation compatible with Windows 8?

    my ipod nano 2nd generation,  will not sync.  itunes says it is syncing, but nothing changes on my ipod. i tried resetting it, and everything stays the same on the ipod, not matching my current library.   i also tried manually dragging and dropping items onto the device, and still nothing happens.  i don't want to wipe everything off my ipod if it isn't compatible with windows 8, because then i won't be able to put my library, what songs/playlists are already there,  back on the ipod.

    it was until the last update of itunes, and many are having issues

  • My ipod nano 2nd generation will not turn off, would i be able to get it replaced

    My ipod nano 2nd generation will not turn off, could i fix or replace this ?

    What do you mean it won't turn off?  How are you trying to turn it off?
    B-rock

  • Ipod nano (2nd generation) won't play any sound

    as the title says, my ipod nano (2nd generation) wont play any sound. the songs still play just fine, but no sound or very little sound is coming out. i've tried different headphones, none of them working. and then i attempted using my speakers which worked at the highest volume of both the ipod and the speakers, but very little sound came out and it sounded fuzzy.
    after this, i reset my ipod, then restored it, and still no sound. so i reset the ipod again, making sure that everything under the setting was correct for the sound. i even tried putting the clicker on "headphones" and that didnt work either. it connects to the computer fine and has a fully charged battery.
    help please?
      Windows Vista  

    thank you for your suggestions, but everything seems to be working normally except the sound coming out of the ipod. i reset the volume limit and nothing. also, there was no volume limit in the summary tab.
    again, thank you for your help... any other suggestions/ideas?

  • IPod Nano 2nd generation software version

    Hi
    I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane   : (
    It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
    One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
    I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
    Any help is appreciated.
    Nick

    That is correct.  Version 1.1.3 was the last firmware update released for the 2G Nano.
    B-rock

  • IPod nano 2nd generation works with iTunes but screen blank!

    Ive had my black iPod nano 2nd generation for quite a bit of time now, the iPods screen wouldnt come on one day but iTunes acsepted it and so i restored it. The screen was still off and so now im here asking, Please help, Thanks!

    Hello upthereds,
    And welcome to Apple Discussions!
    I have purchased a windows 7, 64 bit laptop. I have a 2nd generation iPod Nano if I download the 64 bit version of iTunes will this cause problems with compatibility between my laptop, iTunes version 10.1 and the 2nd generation iPod Nano?
    Yes it is compatible and should work. Let us know if you run in any problems though and we'll do what we can to help.
    B-rock

  • My ipod nano 2nd generation has a white screen when i turn it on.

    Everytime i turn on my ipod nano 2nd generation it goes to a white screen and i dont know what to do...can u help me???

    Anything new about this?

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Should an iPod Nano 2nd Generation Work With Windows Vista?

    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?

    mmu1253397 wrote:
    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?
    Just to close this out I was able to connect the second generation 4g iPod Nano without issue. In a matter of minutes I had it loaded, recognized by iTunes with up-to-date software, sync with over 900 songs and almost 200 pictures and then ejected (I manually manage music)! Really sorry for those who can't get iTunes and/or iPod to work!

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

Maybe you are looking for

  • FM for characterstic value of a function location (asset)

    Hi All, Can any one please tell me the FM module to be used for finding the characterstic value for a given characterisctic name of a function location in IL03 (classification). I have tried using BAPI_CLASS_GET_CHARACTERISTICS, but it is not yieldin

  • How do I print the contrast between "filled" text and its surrounding "box"?

    Hi, Apologies in advance for any ambiguity or confusion . . . I am a self-taught Photoshop user who has come upon a problem to which I cannot find an answer, despite searching online for hours . . . When I design a project, it looks beautiful on scre

  • GL 400000 ACCOUNT ERROR

    HI,     When we are converting purchase requsition to purchase order we get this error- G/L account 400000 cannot be used (please correct) Message no. ME045 Diagnosis Comparison of the field selection strings from the G/L account 400000 and the accou

  • In Upgraded from 4.6c to ECC 6.0 Cust.Movement type is not availablein MIGO

    Hi Experts, We have done SAP upgrade from SAP 4.6c to ECC 6.0. There is a costomized Movement type Z01 and Z02 for goods issue to cost centre in 4.6c and working fine. Now after upgrade those movement types Z01 and Z02 are not appearing for selecting

  • Can't use Skype credit to pay

    I have credit on my account but they keep charging my PayPal as the billing method. How can I use up my credit on account to pay my bill? Help!