Battery display is stuck @ 100%
For some reason the last time a charged my phone, the battery status did not change until the phone completely died. Even my "battery life" app said I had 100%. I have recharged it since and am still having the same issue. Has anyone else ran into this issue? How do I fix it?
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If this doesn't work, fully discharge and then fully recharge your battery to recalibrate the battery meter.
Similar Messages
-
Battery indicator is stuck at 100%
After I upgraded by BB Z10 to 10.2.1.2102 / 2141, the battery indicator always shows 100%. Even when battery is getting depleted. Downside is that the phone suddenly shuts down when it's battery is completed discharged. Before shutting down it moemtarily shows the battery indicator color as red (empty), beeps and shuts down.
Have tried a number of things like taking battery out while charging and replacing, deleted a number of apps but no use. I think its an OS problem.
Solved!
Go to Solution.adesdev wrote:
using application a battery tests to calibrate it.
Such as, what application? Got a link to one or are you just posting with no idea of what you're writing?
adesdev wrote:
if the battery is not healthy it was to replace the battery immediately. because if the battery is not in use kept healthy it will damage the device itself
That makes no sense.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Macbook pro 17" 3g battery status indicator stuck on 100%
Battery status indicator stuck on 100% Worked normaly until today
resetting smc does not help
Battery Information:
Model Information:
Serial Number: 9G95201YS4M0A
Manufacturer: DP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0042
Hardware Revision: 0001
Cell Revision: 0119
Charge Information:
Charge remaining (mAh): 65262
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 65262
Health Information:
Cycle count: 221
Condition: Replace Now
Battery Installed: Yes
Amperage (mA): -1629
Voltage (mV): 8072I closed the lid for about 10 minutes to do something and when I came back the status seemed to be working correctly (80%) and the health now seems normal. I made no other changes. I will keep an eye on it and post if it goes haywire again. Thanks for your help
Battery Information:
Model Information:
Serial Number: 9G95201YS4M0A
Manufacturer: DP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0042
Hardware Revision: 0001
Cell Revision: 0119
Charge Information:
Charge remaining (mAh): 9833
Fully charged: No
Charging: No
Full charge capacity (mAh): 12217
Health Information:
Cycle count: 221
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1550
Voltage (mV): 7930 -
T520: Slice battery charging thresholds stuck
I bought a T520 (4240) a few months ago and, like most people around here had the same issues with pulsing fans and, on applying BIOS 1.28, CPU throttling issues. I'm not sure if the latter one is fixed properly yet, but I also have a problem with the battery charging thresholds that has me stumped.
I have the 55++ and 27++ 9-cell main and "slice" batteries. For a while I let them charge up to 100% whenever connected to AC, but then I read that a 100% charge level is not recommended for day-to-day operation.
I use Fedora 15 Linux 99.9% of the time on my T520. I wanted to set the battery charge thresholds to avoid the 100% charge level, but the "tp_smapi" Linux driver doesn't work for the T520 (yet). I read somewhere that if I were to set the charge thresholds with the Lenovo Power Manager in Windows 7, that they would work in Linux as long as the laptop was not completely powered down when switching from Windows to Linux (i.e., use a warm boot). Well, it worked. In fact it worked really well: I could even power down and remove the batteries and something, somewhere would still remember that I wanted to start charging the slice battery when it dropped below 35% and stop charging it at 80%, even when running Fedora 15.
Having used the machine for a few weeks, I found that I used it on battery power a lot and liked to "top up" the batteries over night. The 35/80 thresholds didn't really suit my working pattern. So, back in the Power Manageer in Windows, I changed the battery thresholds from 35/80 to 50/88 for both batteries (55++ and 27++). On booting back to Linux, I noted that the main battery would respect the new levels, but he slice battery was still stuck on 35/80. Back in Windows, I tried changing the levels in different ways, but the slice battery refused to charge to more than 80%, even under Windows, no matter what I did. It seems that my first change from the default (is it 96/100?) to 35/80 has gotten stuck somewhere and I cannot change it again.
I even notice in the Power Manager that the slice battery constantly toggles between charging and not charging when under AC power if I set the threshold to 85/90. Because the 80% level where the battery is stuck is lower than 85% (my new "start" threshold), charging kicks in, but it immediately stops again, as it won't go over 80%, then, of course, it starts again and stops again, and so on.
How do I fully reset the charge thresholds on the slice battery so I can exceed 80% charge?I had kind of given up on this, but thank you KooMaster for your confirmation that I am not alone with this issue. I don't think this is a problem with the Lenovo or Windows software, as this happens to me when running Linux without either of those. My guess is that the problem is in the embedded controller (EC) firmware. It is responsible for charging the batteries and enforcing the charging thresholds (that's why they still work even when the machine is turned off).
It probably makes sense to charge each battery to 80% first, as it likely only takes half of the overall charge time to get to that level (the last 20% taking as long again). That way, we get both batteries to a useful charge level as fast as possible. However, based on your observations, it seems that someone in Lenovo forgot to tell the EC to check that the main battery has reached its upper charge threshold, not that it has reached 100%, before topping the slice battery up to its upper charging threshold.
Can someone in Lenovo please comment on this issue, as I raised it over seven months ago now and I haven't heard a single word from any of you about it? "KooMaster" has confirmed the problem on a different model with different batteries, so it seems highly likely that a quick check of the (shared?) EC firmware code and a patch will resolve this quite quickly.
(I updated my BIOS and EC firmware today and it made no difference to my problem.) -
My ipad 2's battery percentage is stuck at 95%!!! Eventhough I charge 5 hours, it is still 95%...After that, I unplugged the charger, I use my ipad for 3 hours, it is still 95%!!!!! What's wrong is it?! HELP ME
You probably need to recalibrate the battery. See link below.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
X6 display gets stuck / frozen
I' ve faced this problem lately where X6 device touch display gets stuck, and no touch input is possible. Usually this happens when the phone has been idle or in the pocket for a while, i'd say once in 2 days. Physical keys still seem to be working. I need to disconnect the battery to get the display working again. Timewise this started happening after last firmware update.(V 30.0.003) (Not sure about first incident, cannot remember.) Anyone else suffering with the same problem.
Should i take my device to Nokia maintenance?Seems to be..
Refer this.
http://searchwarp.com/swa652337-Capacitive-Phone-Touch-Screen-Maintenance.htm
..though it mentions only about high temperatures.. also says ideal range 0 - 35 degree C
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
I bought a new Lenovo vibe X2 from Flipkart and after using for 20 days I experience this problem.
The battery meter is stuck at 100%. The battery meter also does not come down even though I keep using it and suddenly phone get switched off after 6-7hrs without any notification.
Phone Details:
Android Version : 4.4.2
Build Number: X2-AP_ROW_S125_141205
Please help me to resolve this.
Thanks..One of the fellow Lenovo users posted this solution for K900.. but it did not work for me. I could not get the boot menu working.
https://forums.lenovo.com/t5/K-S-and-Vibe-Series/Lenovo-K900-Battery-Life-Update-Problem-Lenovo-Powe... -
iphone display is stuck in landscape mode in messaging window? how do I fix? Turning phone does not work
issue solved, i turned off phone and then on again and all is well
-
I have the 4s and i downloaded ios 8 but nowmy battery will drop from 100 to 0 in 30 mins without me using it. it has also happened to my sisters phone and our upgrade isnt until december. how can i get rid of ios8 for anyting else?
Downgrading the iOS is not supported. Basic troubleshooting steps are restart, reset, restore from backup, restore as new device
-
The display is stuck on 640 X 480.
When I switch it it goes back when I open anything.OK. It was a guess anyway.
I changed my screen resolution and then did a search of system files to see what was changed today.
I sorted by descending date/time and that file was at the top of the list.
I opened it with the Property List Editor program and saw it contained the changed resolution, so I took a guess that deleting that file and rebooting would set you straight.
You might look for recently changed files with likely names in your personal settings folder:
~/library/preferences
and try deleting and re-logon (you don't need to restart if you're only changing your own files - a re-logon picks up the change)
Sorry - I don't have a better guess. Good luck -
My Ipad display is stuck on portrait mode. I tried the toggle switch, turning off and restart and just now backed up into Itunes and restored and still is stuck on portrait mode and it won't flip to landscape mode. Is this a hardware problem?
Has lock rotation been accidentally enabled within the control centre? If you swipe up the screen is there a circle with a lock symbol & if so is is greyed out or white - if white it is enabled.
-
I find that the battery % display is inaccurate on my iPad since ios6.0.1. Same is happening on my iPod touch. Today my battery was showing as 93%, I stopped the apps, did a power off and on again and the battery went back up to 98%. Maybe this is why people are reporting battery draining quickly. While I was using my ipad with an external power source the percentage battery was also seen to go down. Is this going to be fixed?
Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Then make sure to try the suggestion I made earlier - the symptoms you are describing are typical of meter calibration - if for no other reason than to eliminate it as a cause. -
i got my iphone 5c from like 4 month ago and the last two days the battery lose charge from 100% to 80% while 30 minut without even using it
First you need to back up you iPhone.
Then http://support.apple.com/kb/ht1414 -
The charging display is stuck on my screen
The charging display is stuck on my screen and it won't do anything! I can't turn it on or off or anything else. What should I do?
Dell Windows XP ProAre you by any chance using iTunes 7.0.2 and firmware version 1.2?
If you are then I would surmise that you are the victim of a bug in the firmware (if you look at the forum there are thousands of people with the same issue)
Unfortunately for us users Apple appear to be burying their head in the sand on this one because there has been no official recognition of the problem, meanwhile people are continuing to download the firmware, oblivious to the fact that this will render their precious and much loved iPods completely useless.
This is clearly a completely cynical policy by Apple because they know that publicly admitting the problem would seriously harm their sales in the busy Christmas period.......POOR SHOW APPLE!!! THIS WILL HARM YOU MUCH MORE IN THE LONG TERM.
Fear not though, they will not be able to hide it for long because I know that the BBC are investigating this. -
HP w2207h Widescreen Monitor Onscreen Volume display is stuck on my screen
I have an HP w2207h WidescreenFlat-Panel Monitor with BrightView Panel
The Onscreen Volume display is stuck on my screen and keeps decreasing my volume to zero is there any solution to fix this
all help appreciated. Thank you in advance.Thanks for your answer It did eventually go away. It comes back from time to time but I chose to use external speakers instead until I can find a solution that wont distroy the product.
Maybe you are looking for
-
Re: How can I change from one subscription to anot...
I understand that. But my question was "How can I transfer the money / credit that was paid for the subscription and use that as credits instead? My mom purchased the subscription no more than an hour ago and has not made a single call with it b/c i
-
We have tried to download some new free games for my daughter this week, there are three which are just showing as "waiting" and not downloading at all and its been almost a week. I deleted all her previous games thinking it might somehow free them u
-
Best way to implement dynamic search criteria
I was recently showing a group of developers some of the Toplink basics. As an example I showed a way to build a Toplink expression for an object search where the search criteria are determined at runtime. Doing this in raw SQL is a bit tricky becaus
-
What is the message types(cross applications) for postgoods issue(outboun)
Hi , please provide what is the messagetypes for POST GOODS ISSUE(OUTBOUND) AND GOODS RECEIPT(INBOUND). Thanks, sriii
-
Capture equipment cost in project
Dear All, need to capture the cost of equipment which uses for project,but problem is that they take equipment from stock & uses for project work & keep it back in stock after use, How we can capture this cost in project? please help me out. Regards