Battery drain when laptop is in sleep mode - Windows 10

Hello everyone,after the upgrade to Windows 10, no matter what i try, but when i put the laptop in sleep mode the battery will drain overnight or, for a smaller amount of time, drops from 100% to 20%. Is there anything I can do? Between this and the Synatics problem, maybe i should've waited before upgrading to Win 10. Thank you! 

Which Vista? Is it 32 or 64-bit?
There are BIOS updates available that address the restart issue. I highly recommend that you update to the current version (F.38)
Update the BIOS from within Windows and have the power adapter plugged in. Do not turn off the notebook until the update is complete!!
Run the hard disk diagnostic from within the BIOS or the HP Support Assistant.
Here is a link to the web support portal for your model notebook.
The BIOS update can be found in the Vista 32/64 Software & driver download section
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

    Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.

    Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.

  • W510 does not wake up when it goes into Sleep mode - Windows 7 Bit

    Hi All,
    The Lenovo thinkpad w510 does not want to wake up once it goes into sleep mode, I have to push the power button until it shuts down completely and then reboot it completely, I have tried different settings in the power management etc. We have the same pissue on 3 different w510`s with Windows 7 pro 64 Bit
    Has anybody got a solution for this problem?
    Regards,
    Solved!
    Go to Solution.

    Hi russellwth,
    Welcome To Lenovo Forums.
    This issue has been solved with the latest BIOS for the W510. 
    Please check our Knowledge Base Article regarding this issue.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • ThinkPad E455 Excessive Battery Drains When Power Off

    I bought a new ThinkPad E455 two months ago with AMD processor and I use Windows 7 (64-bit) as my operating system. The problem is, since a week ago, when I turn off my laptop (completely shut-down, not hibernating nor sleeping), the battery looses 14% in less than 24 hours. This problem has never happened before. When I search for solution, apparently my problem is similar to https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E535-High-battery-drain-when-laptop-is-powered-off/ta-p/1249897 and https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E530-Battery-drains-and-power-manager-issue/ta-p/1249887 and https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E440-battery-drains-when-powered-off/m-p/1527086/highlight/true#M18743. It appears that the power drains happened in other type of ThinkPad as well. Moreover, it seems that this problem is not limited to ThinkPad series (e.g: http://www.tomsguide.com/answers/id-2324931/laptop-battery-drains-powered-shutdown.html), and more surprisingly, some of other brands experience this condition as well. My question is, what causes the power drain? I mean, the laptop just worked fine for a period of time (in my case it is two months), if it was trigerred by something, what is it? I looked for the technical updating BIOS solution in http://support.lenovo.com/us/en/documents/ht077068, but unfortunately the series E455 is not in the list. Of course, updating the BIOS using incompatible version is not recommended by the technical support. Please help me.

    sgegreen wrote:
    See https://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface When you think the laptop is powered off it's actually in ACPI Power State S5 with power being supplied to the power button and some of the USB sockets. So, when you shut down the laptop and then removed the power cord, if the BIOS version was lower than 1.13, the laptop was still draining the battery.I followed your suggestion, and it seems solving the problem, thank you. However, another problem arises just recently. When I was playing a game on my laptop, the battery capacity is decreasing when the AC power connected (as described by both lenovo and Windows battery gauge). I post this problem in https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/ThinkPad-E455-Battery-Capacity-Reduced-When-Connected-to-AC/td-p/2106218. Oddly, the problem (seems) does not occur when I quit the game to windows. Why was this happen?

  • Battery Drain when not in use--Gen 6 Nano

    I have used Ipods for years now. Still have an Ipod Classic and a Shuffle that I use regularly. I have been pleased with the battery life, as a whole.
    Recently I purchased a Nano Touch--Gen 6. I really like the Ipod + Nike features.
    The issue I have is with the battery draining when the unit is not in use. If the unit has been fully charged, I will unplug from computer or wall charger and make sure that: 1)Music/radio is paused 2) Nike receiver is unplugged from Nano. 3) Screen is off.
    If I do not use the nano for an extended period of time, say around 12-18 hours, I notice that the battery has drained between 50%-75% even if nothing is playing or "on". Nothing should be draining the battery this far, in my opinion.
    I can't believe that this is typical. Do I have a bad battery?
    Your help would be appreciated.

    You are not alone. I have had my Nano for several weeks now and have noticed the same thing. I would use it for short trips in the car while I ran errands and find that after only technically using it for maybe an hour or so (over the course of several days), I would already be low on battery. I read the manual and you can only put the ipod in sleep mode. It stays on for 36 hours and only then will it actually turn all the way off. So technically the battery last for several days but that doesn't do you any good unless you are using it for long periods of time all at once. I'm really frustrated because I really like it other than the fact that I'm always having to charge it.

  • Lenovo notebook E540 Battery drains when it is not powered on

    Lenovo Notebook E540 battery drains when it is not powered on. My colleague said that there is a cloud connection being connected during power off and it consumes power. Is that possible? Any resolution?

    Hi Kingchechan,
    Welcome to Lenovo Community!
    As far as I know only the Windows update will be accessing to the server, or might be any other 3rd party cloud related application, which might be accessing to the cloud server.
    Did you check disabling USB always on in BIOS & Wake On Lan from Windows AND BIOS
    Check running command powercfg /devicequery wake_armed to see if any device is programmed to power on the laptop might be this is consuming battery power.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Nokia 700 battery drain in AT&T 3.5g mode

    Hi all,
    I have seen a couple of old comments on the battery life of the Nokia 700 and for the past 5 months I have also suffered from this problem however I have done a couple of experiments and wonder if it is just me or is this consistent with others.
    A little history on my experience:
    I purchased the phone in July 2012 (in the USA). The first couple of months the phone was great: battery life was ~4 days with moderate use in 3g mode on AT&T. In September 2012 I went to China and brought my phone along with me and used a prepaid SIM card while I was there and there was no problem with the battery life. When I returned to the US in October 2012, the battery life diminished significantly: full battery drain in less that 12 hours with NO use. Installing nokia battery monitor offered no insight as the entire battery drain is in the "Background" with no further information. Further testing showed that switching to GSM mode would extend the battery life to 5 days (as opposed to the 12 hours in 3g mode).
    Annoyed by this turn of events, I contacted nokia's repair service, sent in my phone, had my phone replaced by a new phone, and found out that the brand new phone also has the same problem! Rather than dealing with the repair service again (the whole process took about 1 month to complete and there was a 2 week period where I was without my mobile), I opted to run my phone in GSM mode to extend the battery life, only switching to 3g when I need fast mobile internet.
    Anyway, in December 2012 I travelled to Malaysia for 2 weeks. Once again I brought my phone along to use a prepaid SIM card. Not much to my surprise, when running the phone in 3g mode in Malaysia with moderate use the phone lasted 4 days on a single charge! Unfortunately, upon returning to the US, the battery life problems resurfaced, leaving me to believe that it the problem has something to do with how the nokia 700 is interfacing with AT&T's service.
    My questions are the following: has anyone had a similar experience to mine? Does anyone know if AT&T did anything to their service that could be causing the battery drain when in 3g mode? If so, does anyone know how to fix this? Finally, is there anything Nokia can do firmware wise to prevent this from happening? I believe this is technically possible because the first few months that I owned this model I had no problems with battery life.
    Thanks for reading my long-winded message.

    This is an issue which is widespread in the cellular industry but which nobody will comment on.
    All customer support in the business is done by either script monkeys in call/email centres, or by near-useless forums such as this one which are packed with people tearing their hair out but on which anybody who really knows anything (i.e. working inside the industry) is banned from participating. Nokia employees read the stuff here quietly.
    I too have noticed there is a GSM / 3G selection in these phones (I have a 700 and an 808), as well as the various configs for "mobile data" (GPRS or 3G or HSPA). It would be interesting to test whether setting the phone to GSM-only (i.e. disabling "3G" in that menu) stops it working for mobile data totally, or forces it to use only GPRS for mobile data. I have just done a quick test (have a poor 3G signal here) and it looks like the latter.
    Different cellular networks are configured differently. For example the 808 is severely affected by the famous 3G bug, massively so in some countries (USA especially though apparently not really on T-Mobile there) but much less so in the UK. I think some networks are set up for a much higher packet rate, or they transmit at a lower power which would force the phone to wind up its own power output a lot more.

  • Disconnected from ANY chat program when I go into sleep mode

    I am using an airport express connection with road runner. When my computer goes into sleep mode, any chat program I am using is disconnected -- this happens with AIM, iChat, and Netscape Navigator's chat screen. As soon as I move my mouse, or touch the keyboard, and go active, AIM automatically reconnects. Any ideas on how I can remain signed into a chat service when I go into sleep mode?

    In sleep mode your mac only keeps the data in the RAM. all other things will be turned off, so that it´s impossible to stay online with the chat applications.

  • Ever since I got the new update 5.1 my iPod's been dying faster. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason(even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? lagging too

    Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..

    Some Users have Reported that a  Restore as New  has helped Resolve issues...
    Backup and Set Up as New Device
    http://support.apple.com/kb/HT4137

  • Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  The screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.

    Recently having problem with flickering on monitor (viewsonic vg2436wm).  When coming out of sleep mode.  It will flicker, the screen goes gray, sometime out.  Have to press power button to get screen on.  Problem stops.  Getting more frequent.  After sometime problem stops. My system is a Mac Mini 2010, 2.4 intel core 2 duo, 2 GB, running OSX10.8.5

    See if it's related to this...
    The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • Why does my MAC sometimes crash when coming out of sleep mode?

    My mac freezea sometimes when coming out of sleep mode, and occasionally the screen will go black. At other times I will be using the MAC and it will just freeze. The only way to get out of it is to kill power and reboot. It seems to be happening more frequently.
    It was suggested that I fix permissions and start in sleep mode. This has helped in the past, and I am going to do it again now. I also recently upgraded to 10.6.8, and after that the crashes were fewer, but now they are increasing again.
    I am including a log of the recent crash a few minutes ago.
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:02 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:03 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:04 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:15 AM com.apple.launchd.peruser.501[94] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    12/23/11 11:41:23 AM com.apple.launchd.peruser.501[94] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
    12/23/11 11:41:34 AM com.apple.WindowServer[71] Fri Dec 23 11:41:34 Macintosh.local WindowServer[71] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    12/23/11 11:41:50 AM com.apple.launchd[1] (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory

    Okay thanks, but I am a newbie who is not a very tech kind of a person. The only periphals I have are a kodak camera dock, a Canon 310 copier/fax/scanner and a pair of altec speakers. How do I determine  if they all have drivers for my MAC? They all seem to work okay, if that is a sign, though the Kodak camera Dock is a bit slow. How also do I determine if they are Apple energy compatible? With each of these peripherals, do I simply disconnect them from my MAC one at a time to see if there improvement?

  • Need help - wifi gets disconnected when it goes to sleep mode - iOS 6, iPhone 5, WPA Enterprise

    Hi, I have read a lot of discussions regarding wifi gets disconnected when it goes to sleep mode on iOS 6, mainly on iPhone 5.
    Here is my configuration and it just keeps disconnecting wifi connection once it goes to sleep mode
    iOS 6
    iPhone 5 white
    Purchased on Nov 3
    Work wifi config: WPA Enterprise
    I tried to manual add the wifi but it did not work. I tried all except for upgrade to iOS 6.0.1. I had a call to Apple Support and the guy told me I could not trust everything i read from here (well, how dare he is!!!). But I did all I could think of, and read from here.
    I am with ATT and I do not have a receiption at all at work. I have to turn it to airplane mode, and use the wifi connection. I put my iPhone 4 with iOS 5.0 side-by-side to compare. My iPhone with iOS 5.0 DOES NOT disconnect the wifi connection when it goes to sleep mode; but of course, we all know, iPhone 5 with iOS 6.0 does
    Any helps would be so much appreaticated. I am considering to return the phone to apple store, and cancel my 2 yrs extended contract with ATT. I might think to get another one once they have the issue fixed. It is no point to have an expensive paper-weight at work while I can't use the celluare nor wifi connection.
    Thanks again,

    Hi ChrisJ4203
    I have tested it at home wifi tonight. My phone and my wife's iphone (both iPhone 5 with iOS 6.0) do the same.
    With cellular data on (aka airplane mode OFF) with WIFI ON
    Wifi icon replaced by ATT's LTE icon once the phone was waken up from sleep mode; but within 2 secs, the wifi connection got reconnected again.
    With cellular data OFF (aka airplane mode ON) with WIFI ON
    WIFI icon disappeared from the top bar after both phones were waken up from sleep mode. It took a while to reconnect to the wifi network (more than 10 seconds).
    On a separate note, after i rebooted my phone, i can see it does "searching" the ATT's signal, then it shows "No Service", then next second, it shows ATT with full bars and LTE icon.
    My question is, i have never noticed the "No Service" showing up from my iPhone 4. The "No Service" shows up on my wife's phone too. When I first got her phone and was doing the installation, I had noticed the cell signal dropped from full bars to no service, then within few seconds, it went back up. I have not had time to test on her phone again, but it is something I will be monitoring for. I wonder if anyone has similar experience like this.
    anyhow, any feedback on how to fix the wifi got disconnected while in sleep mode would be very helpful.
    thanks,

  • OSX 10.9.1 macbook pro 13 retina - wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse

    Hello,
    My config is OSX 10.9.1 new macbook pro 13 retina (2014).
    The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
    It was not the case before I bought the BT mouse.
    Is this problem between Wifi and bluetooth coming from the OS?
    Is there a fix already available or scheduled?
    Thanks

    Hello alexandrefromfrance
    Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
    After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
    Solution
    Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility.
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".

Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Restart your computer.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Regards,
    -Norm G.

  • How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    Try Battery Doctor. It'll provide you with plenty of info on battery consumption.
    https://itunes.apple.com/sg/app/battery-doctor-hd/id459702901?mt=8
    http://i1224.photobucket.com/albums/ee374/Diavonex/17e0b678bc14bd16c469f71151a08 a7d_zpse788fae8.jpg

  • Why does my Mac Pro open to a fuzzy screen when coming out of sleep mode?

    Why does my Mac Pro open to a static-filled screen when coming out of sleep mode?

    But does it then come fully awake? My MB Pro comes on with out of focus screen as if in a fog but once it comes awake it clears up, there is a progress bar at the bottom showing the progress from sleep

Maybe you are looking for

  • How to refresh an existing row of a JTable

    Hi all, I have to refresh the data of an existing row of a JTable after some time in thread. The code snippet is DefaultTableModel model=new DefaultTableModel(data,columnNames); table = new JTable(model)                public boolean isCellEditable(i

  • How to store/view items in a server folder

    I have been searching for a way to store/view items in a folder on my sharepoint server.  Basically at work we have sharepoint setup and one of the pages shows documents that reside in a folder on the sharepoint server.  If I add a file to that folde

  • Please help...this safari is weird

    Hi I've been using my MacBook since march and never had a problem I only use it for safari and some office work nothing extreme. I take good care of it and I have every update to date, Im running on 10.4.10. Since 2 weeks ago(last updates from apple)

  • Request Status Red

    After data load from ODS to Cube request status is RED.But data successfully transfered and validated the data,exactly it matching.No where I am getting log also.What could be the problem.But forcibly made it to green.But in production i cant change

  • Apple "Pages" to PDF

    A friend of mine uses Apple Pages to create a newsletter for our ministry.  When he used Pages to make a PDF it was over 20 megs in size.  I converted that PDF to Word, then back to a PDF and it was less than 1 meg.  Is there a way for him to use CSL