Battery drops on 3G activation

Hi to all,
From a month I have a strange problems.
With iOS 7 my battery life start to be a bit poor... In first time i thought it was an intense use of whatsapp or fb messanger or many notifications.
But the phone last about 5 hours of activity and 8-10 of standby.
Now I've update to iOS 8 and the battery is getting worse. (restore in DFU mode as new phone)
Now the battery last 2-3 hours and what i've found out is that if I activate the 3G the battery drops immediately...like today i have had 87% of battery life and after just activate 3G it drops to 35%...
I think its not normal...
Do I have to replace the battery? or maybe its a software problem (ios 8 bug?)
oh and I also recalibrate the battery but the problemi is there
thanks a lot in advance

I suffered the same problems until I read some of the helpful hints on some other discussion lines. My phone was discharging completely in about 9 hours after the upgrade but one simple hint seemed to work.
Basically the solution that worked for me was to reboot the iphone i.e. hold the sleep and home button simultaneously for about 10 s until the apple icon appears on the iphone.
So for those tempted to install OS4 the strategy is:
(a) install itunes 9.2
(b) connect thephon to the computer
(c) install OS4
(d) after the install is complete and itunes has finished with the phone
dusconnect it from the PC.
(e) put the phone in sleep mode
(f) recharge the phone
(g) reboot the phone
After doing that (tho in my case betwen step (e) and (f) was 18 hours and it was two recharges not one!) the phone battery should be restored to normal (<5% drain in 12 hours since midnight).
Some discussions suggest it might be the location finding functions causing the power drain. That wasn't the case for my set up as location functions were off and remained off during the battery drain phase. I have also left multiple apps 'live' since the reboot with no excessive power drains.
A clear indicator that the power drain is back to normal is the phone's temperature. It was quite warm to hot during the post OS4 install and discharging quickly, but after a post-install phase reboot (g), some 18 hours after upgrading the OS4, the phone started to cool (slowly). Some 2 hours post this 2nd reboot the phone was at normal ambient temp (cool to touch - it is winter in Melbourne after all!).
All this suggests to me that the automate reboot during the OS4 install isn't sufficient, and a manual reboot with the phone not connected to the computer (in my case a ASUS laptop running Win 7, and Itunes 9.2) is the solution for the present.
Nil Desperandum!

Similar Messages

  • How do I stop the drop box from activating, it is using the wrong info and I can't stop it

    When I use the slot to provide my e-mail address, the drop box is activated and has the wrong info in it

    See this: <br />
    http://support.mozilla.com/en-US/kb/Form%20autocomplete#w_deleting-individual-form-entries

  • Macbook pro 2011 battery dropped to 30% after 300 cycles

    Hello ,
    I have a Macbook pro early 2011 and I have noticed that the battery suddenly is draining too fast , after installing battery health it seems that in 2 weeks the battery dropped from 86% to 30% and there is the service battery sign
    Please help !
    Charge Information:
      Charge Remaining (mAh):    1696
      Fully Charged:    Yes
      Charging:    No
      Full Charge Capacity (mAh):    1696
      Health Information:
      Cycle Count:    304
      Condition:    Service Battery
      Battery Installed:    Yes
      Amperage (mA):    -133
      Voltage (mV):    11953

    Cycles mean almost NOTHING,  its short term abuse that matters.
    1. did you often drain the battery very low?
    2. did you often /always have your macbook on charge,......or did you often / always BOTH have your macbook on charge AND in sleep mode?
    3. did you often /always play realistic heavy graphics games ON battery on your notebook?
    1 or 2 and 3 are harsh on the battery chemistry and therefore its longevity
    all batteries are consumables meant to replaced either in their own "due time" or early due to abuse / misuse.
    Proper understanding of a battery charge cycle
    A charge cycle means using all of the battery’s power, whether that is at once, or over several shorter battery discharges and recharges.
    Two examples for clarification:
    As a first example, where one fully charged battery is discharged down to 10%, then fully recharged, then using 10% of that full charge, this counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
    In the second example, where one fully charged battery is discharged down to 40%, then fully recharged, then using 40% of that full charge, this also counts as 1 cycle since the total of both discharges is 100% of a full charge of use.
    While both examples are that of a single charge cycle, the first example is more aggressive against the lithium battery chemistry than is the second example. In short, collective overall gentle shallow or mid-range draining of your lithium battery is a better use condition than is the first example of deep-draining of the battery.  While both are quantitatively identical as a single charging cycle, they are wholly different qualitatively on the battery chemistry, which is directly related to its ultimate longevity and health.
    In short, it is the near and mid-term life of the battery as relates to its proper care (or lack thereof) that is to be looked after.
    Priorities in order of decreasing importance for battery care are:
    1. Avoiding deep discharges of the battery.
    2. Avoiding having your battery constantly on charge or on charge and in sleep mode.
    3. When playing graphics intense games, use your notebook plugged in when possible.
    4. Reduction of battery cycles by plugging into power when on the go, or when accessible.
    A person who has, for example, 300 charge cycles on their battery and is recharging at say 40% remaining of a 100% charge has a better battery condition state than, say, another person who has 300 charge cycles on their battery and is recharging at say 10-15% remaining on a 100% charge. DoD (depth of discharge) is vitally important on the wear and tear on your Macbook’s battery, much more so than is the counting of charge cycles. There is no set “mile” or wear from a charge cycle in specific. Frequent high depth of discharge rates (draining the battery very low) on a Lithium battery will greatly hasten the lowering of maximum battery capacity.
    Understand that a charge cycle is a general parameter of use, but is not directly related to the short-term or mid-term abuse of the battery, which can rapidly hasten a shorter lifespan, regardless of what the actual cycle count on the battery indicates.
    Proper considerations for near-term care of the battery is of utmost importance. Abuse of the battery is entirely avoidable, long-term eventual old age deterioration of the battery is entirely unavoidable.
    Apple’s adaptive charging system mitigates much potential for accidental battery misuse or abuse; however it is still readily possible to abuse the battery and thereby affect battery health.

  • My iPhone overheats. Battery drops from 100/90% to 10% sudenly. Got the device 20 days ago. I'm currently living in The Hague, there is no Apple Store in this city, took an appointment in Amsterdam, after 3 hours drive and 60€ travel cost got into the App

    My iPhone overheats. Battery drops from 100/90% to 10% sudenly. Got the device 20 days ago. I'm currently living in The Hague, there is no Apple Store in this city, took an appointment in Amsterdam, after 3 hours drive and 60€ travel cost got into the Apple Store, 73 minutes delay on my appointment the Genius  tech tells me I should leave my device for further checks in the store and come back in a week or two. Not presicely the answer I was looking for, plus he did not have any device to lend me until my iPhone was checked. Quite dissapointed, Apple was standard for quality on customer satisfaction, in the last 10 years I bought 3 MacBooks, 5 iPdas, 7 iPods, 5 iPhones and 2 iMACs... please don't let me down. [email protected]/[email protected]/[email protected]

    Dear Ocean, one is a complaint about the quality of the device.
    The second about the quality on response from Customer Service.
    No worries, I'll delete both post since it seems that won't bring anything productive.
    Good bye Apple!

  • ER : 10268883 : DROP AS METHOD ACTIVITY ON TASK-FLOW SHOULD ALLOW CHOOSING

    hi
    In the context of Re: Task Flow API for programmatically retrieving parameters?, this forum thread is Re: Task Flow API for programmatically retrieving parameters? to get your vote or feedback on one specific ER:
    - 10268883, "AM: DROP AS METHOD ACTIVITY ON TASK-FLOW SHOULD ALLOW CHOOSING PAGEDEF FILE"
    It resulted from a suggestion by Steven Davelaar
    at http://groups.google.com/group/adf-methodology/msg/b701acd873c3d888
    "I think it would be a nice ADF enhancement that when you drag and drop an AM method as method activity onto a tasflow diagram, you get a choice to either create a new page def, or pick a page def of some other (view) activity already on the taskflow. "
    (But, regardless the intent of this forum thread, feel free anytime to pursue other means to attract the attention of Oracle to a specific ER. Possibly by creating a service request referring to an ER, or by any other way you see fit.)
    many thanks
    Jan Vervecken
    edit (January, 2011) : see also "The official ADF EMG bug and ER thread"

    fyi
    There is a +1 (or would it weigh more than one), "a jolly good idea ", from Duncan Mills.
    at http://groups.google.com/group/adf-methodology/msg/bf7d2c32106b2e7b
    "Sev 3 is the default status for an Enhancement so that's why it's at that value initially. I've actually upped the priority of this one as I think it's a jolly good idea and I don't really see any downside to it assuming you don't have a huge TFs with many many method activities of which only a small number are used most of the time."
    regards
    Jan

  • HT5012 why my battery drop faster n my phone switch off although have 15% after upadate ios 7.1?

    why my battery drop faster n my phone switch off although have 15% after upadate ios 7.1?

    Battery optimization: http://www.apple.com/batteries/iphone.html
    Another article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • I just upgraded to iOS7 on my iPad4 and found it got bettery drained. Followed online tips but not working. In 2.5 hours w/o doing anything, the battery dropped from 100% to 77%. Help!

    I just upgraded my iPad to iOS7 and got battery drain problem. I followed the tips online to turn off all the unneccessary features and seems not working. Because this morning, the battery drops from 100% to 77% in 2.5 hours and I didn't even work on it yet. The smart cover is already closed.

    If you followed these steps : http://www.apple.com/ie/batteries/iphone.html , you can attempt to restore your device (back up your information first ,if you don't have a backup) and see if that changes anything. If issue persists , you can contact Applecare and explain the steps you followed . Don't forget to mention that this started happening after you updated to iOS 7 .

  • I'm using i phone 5, the battery drops suddenly from 20% to 5% what is the reason ? and what is the solution?

    i'm using i phone 5, the battery drops suddenly from 20% to 5% what is the reason ? and what is the solution?

    There could be many causes and many solutions.  All of them start with creating a backup using iCloud or iTunes on your computer.  After that, try some of the steps written about in this blog;
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
    If none of that helps, you may consider putting the iPhone into DFU mode (Google it) which will reset the firmware that monitors the battery.

  • OS2.0 PB turns off when battery drops below 10%

    My PB will turn off when the battery drops below 10%. Is this a bug or just normal?
    I've updated it to OS 2.0.
    Thank you!

    It should run down to 0%.
    This is definitely not normal.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!

  • MBP battery dropping fast

    Hi,
    had been browsing hte forum for days and cant really find the answer to my query.
    i had my MBP for 6 mth, i'm displaying my batt status in %.
    what happen is the % of the battery drop very fast, like less then a min drop to 1%.
    In 10 min , it can dropped to 100% to 88% while i'm just browsing the net.

    ..... and I have a similar problem with my new replaced battery. My Apple reseller replaced my old 17" MBP battery on last Saturday but I noticed a strange effect today. Yesterday I shut down my MBP by 50% and I only had 43% this morning.... yes I alreday calibrated the new battery as described in the Apple Manual. Furthermore, I lost about 20% while I was importing 4 Audio CD's in iTunes. Do I need to replace the battery again? Or do I need to calibrate my battery again?

  • IPhone become hot and the  battery drop

    Hi All,
    My iPhone is having problem. My iPhone is 3Gs, 32 GB, OS 4.2
    My problem is: the phone suddenly become hot and make the battery drop, and it's already happened for 1,5 weeks. It seems my iPhone is reading something (perhaps some application) but I don't know what.
    Can someone help me?

    There is some application that is stuck trying to send data. The most common app to have this problem is email, but first try a full reset (if you haven't already: Hold the HOME and SLEEP buttons until an Apple logo appears, ignoring "Slide to power off",
    If this doesn't fix it next try the following:
    Go into Settings/Mail,Contacts,Calendar. Tap each email account that uses PUSH and turn it off (turn off the ACCOUNT, not PUSH). Close Settings and open the email account; verify that the account does not appear. Then exit Mail to the Home screen and do a reset again.
    Once the phone comes back on go into Settings and turn the email accounts back on. Fully charge the phone and test it again.
    If you still have a problem you may have to restore the phone. Connect to iTunes and click the Restore button. If you have previously restored or updated and that did not fix it this time set up as a new phone.

  • Sony Z1 Compact battery drop

    Hi All, got the Z1 Compact since jan. 2014 never had any problems regarding the battery now when the battery is below 50% it suddenly drops (not drains) to 1%.  and shutsdown. i noticed this problem since lollipop update  first screenshot show it just after 20:00 the second time was today just before 17:00the empty space on the second screenshot was for shutting down and restarting the phone.. i though that might help. but didn't  

    I have the same problem too , i noticed that phone never goes to deep sleep always on 300mhz cpu usage !! when left on standby it only has 16 hours when 100% while it was 4 days before ! i dont know what happened after that update phone is useless now unstable and it all happened suddenly without any warnings . factory resets and pc companion repairs are useless too .
    I need a solution for this problem cause its sony's fault !! 

  • Drag and drop option not active - Captivate 8

    Is there a particular slide you need to use or something else you need to have on your slide in order to activate the drag and drop menu item? All other menu items in the Interaction menu are active, but drag and drop.

    Drag and drop is not available for Responsive projects.
    Sreekanth

  • Drop Database in Active/Passive Cluster

    Hi,
    database is 10.2.0.4 on RHEL AS 4. Database is using ASM for the storage of physical files. This database is part of Active Passive cluster.
    Can you please guide me as how can I drop this database and also remove the entry from cluster.
    Thanks

    Panicked DBA wrote:
    Hi,
    database is 10.2.0.4 on RHEL AS 4. Database is using ASM for the storage of physical files. This database is part of Active Passive cluster.
    Can you please guide me as how can I drop this database and also remove the entry from cluster.
    For dropping the database, using the DBCA is the best approach. After the removal, use the command srvctl to remove the entries from the OCR.
    HTH
    Aman....

  • Battery drop problem

    It seems a common problem for new Blackberry OS. I tried to report it to the issue center. But I didn't get any useful suggestion. He told me to create a report via "Help" but I can't without an valid incident number. Here is the problem:
    The common view (no serious investigation) is that since the version software has updated (In my Q10 is 10.2.1.2977), the battery consumption becomes more serious than before. I don't know what causes their problem, but in my part, the system process eats the battery every a certain duration (don't know how long, happened 2 or 3 times per day), and the battery usage line increases dramatically and returns to normal level several minutes later. I checked every process that I can see in the system monitor, there are several cases. Sometimes, "standby" process has the same phenomenon at the same moment, sometimes it's PIM Services. Besides, BBM and Location (GPS) also happened to chew the battery. At the same time, the phone becomes really hot. What's more, the solution is to cut the network (not wifi nor data connection, it's the phone communication network). But it can only stop the issue for this time. I also find in one picture from internet, that someone sent to a BBS forum, a stair form of battery line usage where the drop is very slight. He said he only received 3 or 4 calls during that time.
    When these cases happened, I didn't do nothing. The phone became warm by itself and even hot.
    Does someone know how to solve the problem? what causes this problem? Thanks
    The first 4 pictures is the case of BBM.
    And the next 2 picture is the case of GPS.
    These last ones are the case of "system" process.
    I also have the picture of PIM service battery usage and cpu usage line in my phone.

    I understand that we are not allowed to downgrade to the last version of OS. I really wonder if apple is suppose to be responsible for this fault or not? Is it our problem that we chose to upgrade to their new software from their request but ended up with such a problem.
    I think it is only reasonable that they solve our problem or allow us to downgrade since they are not yet ready with their software. Which I don't think any of the apple staffs is looking at this or they simply ignored....really makes me want to switch to other phones eventhough I've been using iphone since they first launched.

Maybe you are looking for

  • Finding source database table/column name for a column in a view

    Hi i need to be able to identify the original database table/column name for a column in a view. e.g. say i have a view like this create v1 as select a.name fname, b.name bname, c.name cname,...... from u1.names a, u2.names b. u3.names c where .....

  • Hi. Friends. Unable to Pass Parameters in Visual Composer

    Hi.                Currently we are working with Visual Composer. Our scenario is like we have developed 3 Iviews in one page. we could be able to get result also.                     But our scenario is like whatever the values we give in First Ivie

  • Oracle BPEL Worklist application as a remote portlet in ALUI portal

    Hi, I am integrating the Oracle BPEL sample worklist application as a remote portlet in ALUI in a community page. I have 2 urgent queries...and desperate to look for a resolution... 1) On opening the page where the remote portlet is placed ,it is ver

  • How to create tool tip in indesign skd?

    hi, Anyone suggest me, how to create tool tip in indesign skd? thanks, vijay

  • Download All and Download - both possible?

    Hi Friends, I need help in achieving two download options, i guess i missed out few main points in my yesterday's post 'Download Query', i though i will start a new thread so that i can explain the issue/requirement in detail. My requirement is somet