Battery expanded and burst open-What caused this?
Hello,
I have an early 2008 MacBook Pro. It still had the original battery in it which a few months ago started expanding. At first I thought it wasn't a big deal but later on it started getting much bigger until the actual casing of the battery popped open. Unfortunately it was installed so slightly pressed into my case where it seems the keyboard slightly raised up.
I went to OWC's website and purchased a new battery for this laptop. It's in there now and seems to be working fine. The keyboard seems to be okay also and my laptop is working perfectly normal.
My question is what caused it? Was it some type of defect or just an old battery? I actually have 3 images that were taken of this battery. The concern I have mostly is will it happen again? I don't want to damage my laptop. Is it possible fan related? I think I can hear the fan running but it doesn't seem to be very loud so I thought maybe one fan (if there's more than one) went out or maybe it's not running as fast as it should. Would this be a fan issue or something else that needs to be fixed? I have thought of making a Genius Bar appointment to have Apple check it out but of course if it's nothing wrong with it I'd rather avoid the appointment since it's a long drive to my nearest Genius Bar.
Thanks in advance for your help.
The battery was old and it failed completely. That is not that unusual. Next time that you detect that occurring, replace the battery immediately. If your MBP is working properly, there should be no problem and a trip to the genius bar is not warranted for that particular issue.
Ciao.
A battery in a 2008 MBP should be good for up to 300 cycles, sometime more, usually less.
Message was edited by: OGELTHORPE
Similar Messages
-
As a novice computer user, I wonder why I'm often getting "white-out" (program/app/site I'm working in goes totally blank onscreen). This is when I'm Internet online. If it makes a difference, I'm working 99% of the time on battery, not AC, power. Some of the possibilities I'm guessing are: glitches in my Verizon FiOS Wi-Fi providership?; staying too long on a site that's waiting for me to finish and "Submit"?; computer hardware prob (yikes, I hope not! It's brand new). Any ideas out there?
When this 'white-out' occurs, is the display 100% white with no error message and no menu bar?
Does this occur when you are using Wi Fi or connected to the Internet via the Ethernet cable?
Ciao. -
blue screen flashes too quickly to read
Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?
This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!... -
Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?
It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)
-
When I turned my computer on this morning, all of my desktop icons were missing and I wasn't able to open any programs. I logged off and logged on 3 times before it was all back to normal. ANy idea what caused this? Thanks!
Nope!
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
This will help in providing you with the proper and/or correct solutions. -
What causes This workbook cannot be expanded error?
I am trying to open a Discoverer workbook and am getting the error message "This workbook cannot be expanded". What causes this error and how can I fix it or work around?
Thanks,
Cherie MachlerCan you just click 'open' to run the report without exanding it to see the worksheet?
I have heard of this before and one work around was to just open it and it would work anyway. This was a couple of years ago and not sure if the same 'feature' still exists?
Russ -
When using compressor voice is not sync with video. What causes this and how to fix it, please?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
MY IPHONE STARTED SMOKING YESTERDAY WHILE I AS USING IT. AS I AS PUTTING THE PHONE DOWN THE BATTERY EXPANDED AND BLEW UP IN MY HAND. NOW I HAVE ACID BURNS FROM THE BATTERY NOW I HAVE ACID BURNS ON MY HAND. WHAT CAN I DO????
Definitely see a doctor.
If the phone was under warranty, make an appointment at the genius bar. Actually, you can do that even if it wasn't under warranty (and probably should).
FWIW, nearly every documented case of this happening can be traced to liquid damage or a botched 3rd party repair. -
My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?
The image suggests an issue with the graphics board.
The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue. -
Every once in awhile while using safari my bookmarks list disappears. Later it just shows up again. Anyone know what causes this and how to fix it?
I have had exactly the same problem now with two mini iPads. Everything was tried; 1) restarting; 2) restoring factory settings etc. NONE worked. Eventually Apple agreed to replace it. I have had the replacement now for two to three months and exactly the same thing is happening again. So off to Apple tomorrow to get another replacement.
I am quite a heavy user of the iPad so wonder if this is something to do with the fault.
It is so frustrating as sometimes reset works, and then after 10/20/30/40 minutes (you pick) it goes unstable again. -
the icon "personal hotspot" keeps disappearing on my iphone,what causes this and how do i rectify this?
Here is Apple's latest response to the FaceTime issue that cropped up last week:
FaceTime 4-16 Issue
Folllow the troubleshooting steps to try to resolve your issues.
Cheers,
GB -
Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
When I use the scissors tool to create a segment of a track, select the segment and bounce it, about 15-20 seconds of silence is added to the beginning of the bounce. What causes this?
Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated. -
When synching my ipod 80 gig classic, I get this message " iPod cannot be synched. A duplicate file name was specified" And yet, any new music in iTunes is added. What causes this message?
Try deleting the iPod Photo Cache from the nominated folder that you have set up to sync photos to the devices.
See iTunes: Understanding the iPod Photo Cache folder for more info.
tt2
Maybe you are looking for
-
Position does not exist in table T528
I have transported from Dev to QAS. I am trying to hire an employee using PA40 and when i select position it is giving an error saying does not exist in table T528
-
Delays in data transfer.. server-to-client
All, We are experiencing delays in object transfer between server and client. The delays are longer with large objects (a single object with an array of objects that reflect the rows returned in a database) than small (ie: 10 rows vs 400). Does anyon
-
For quite some time I have been having some issues with Firefox 5.0.1. I have been through all of the troubleshooting I can find but cannot fix the problem. Most of the features that require a window to be opened in Firefox do not work. Eg. Downloads
-
ABAP calling a servlet....
Hi everyone, I read that ABAP program can call a standalone JAVA program. Is it possible to call a servlet (and of course passing parameters) instead of a standalone JAVA program ? Thanks.
-
Unable to launch Adobe editor in netweaver developer studio.
Hi, Any one helps me to open adobe editor. I was created up to UI element. And pdfSource as binary variable. When I was to edit interactive form in Outline, the problem was occurred Like, Unable to create part: interactive from. And an error has occu