Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????
Battery finishes in 2h 20 min maximum. Cycle count 375 and condition is normal. what to do please help????
No i have checked thorougly i dont have any window emulation parallel. i had a problem with my charger some days back that Apple replaced me. but after that i started having battery timing 2h 20 min maximum. the details about the MBP are as:
MacBookPro6,2
Charge Information:
Charge remaining (mAh): 2375
Fully charged: No
Charging: No
Full charge capacity (mAh): 6046
Health Information:
Cycle count: 376
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1569
Voltage (mV): 11043
and (eww) i have read the related article linked http://support.apple.com/kb/TS1473 . though I could not understand the 5th point of this article but i think there is no problem about that.. PLEASE HELP
Similar Messages
-
I'm new to apple and have just put a mini cd in my imac and it wont eject....please help
i'm newt to apple and have just put a mini cd in my imac and it wont eject.....help
As you've already found, you can't use mini cds in slot-loading drives (which is what Apple uses, as well as many PCs now).
Here's a link to another message board thread that might help you.
http://forums.macrumors.com/showthread.php?t=406613 -
I have updated my iPod with the Latest OS version (5.1.1) and after it goes empty/drained battery, It does not charge, Please help me with this thankyou somuch
Also try a different cable. Also see:
iPod touch: Hardware troubleshooting -
What if I exceed in 1000 maximum cycle count in my MBA battery?
thanks for the concern and help
To add to Joey's excellent response, a quote from Apple's support website:
http://support.apple.com/kb/ht1519
"Batteries have a limited amount of charge cycles before they are considered to be consumed. Once consumed, a replacement battery is recommended. You can use your battery after it reaches its maximum cycle count, but you may notice a reduction in your battery life. Knowing how many charge cycles are on your battery and how many are left can help you determine when a battery replacement is required. For optimal performance, replace your battery when you reach the maximum cycle count."
The cycle count is just there to determine warranty eligibility; batteries past the maximum cycle count for that model are ineligible for free replacement, regardless of whether they are covered by AppleCare or hardware warranty. -
In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64
same here.
-
Ok I bought my iPhone 4S 5 months ago and these recent weeks I have had problems with the battery dying at 50% like completely shutting off meanwhile it has 50% battery I don't know what to do please help
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
Average Maximum Cycle Count for Early 2008 MacBook (Black)
I have a black early 2008 MacBook that now in its fourth year, and I have noticed that battery health have started to diminish.
I am wondering what is the maximum battery cycle count for the early 2008 black MacBooks, and if its time to replace it? (I have 250 cycle count, with 78% health remaining)You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from The Apple Store http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY -
Same experience with my ipad mini..max charging was only about at 90%. What to do please help?
What to do on ipad mini with an insufficient charging?
Have you tried a soft-reset to see if it charges, or the battery indicator updates, after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
-On iCloud, how can I change the Alternate Apple ID? My account has an alternate address which is NOT MINE and I need to change it ASAP. Please, help!
Read here > How do I change my alternate Apple ID
-
I see that when importing to the oItems destination via DTW, it is possible to bring in Cycle Count info. There is no sample or template CycleCount sheet, so what I know I gleaned just from looking at the mappable fields in DTW.
Can anyone give me some tips about importing and using Cycle Counts? I confess I find updating any destination via DTW to be a real chore, frequently more work that it is worth.
In this instance I already have items and warehouses and prices and quantities on hand. All I would want to do is import Cycle Count fields. So in DTW would this be considered an update (of existing items) or an import (just of cycle counts)? Since I don't want to change anything for the items, warehouses, or prices, what would be the least amount of data I'd have to show for the already ready loaded areas to get the cycle counts in?
TIA.By Cycle Counts If you talking about importing prices and quantities
You need to use DTW template StockTaking template inside folder oStockTaking.
Here you will enter ItemCode WH and Quantity
the Prices will be imported using the ItemPrices template in the oItems folder as an Update with the Item main template.
then you will through the Inventory > Inventory Trans > Initial Quantity Reconcile the Quantities imported
Suda -
Cycle Count API and Serial Items
We've been using mtl_cceoi_action_pub.import_countrequest to submit our cycle counts, but now have to include serial items.
I cannot find out how to link serial numbers to this procedure so that it can pass. There is a serial_number field in the record passed to the procedure, but how do I deal with quantities greater than 1?
Any ideas?
Many thanks.
Jonathan
Edited by: [email protected] on 16-Dec-2009 02:57You need to pass one serial at a time.
Hope this answers your question. -
My Ipad Mini will no longer connect to the wifi at work. It did when I first got it but now it just displays unable to connect. What gives? I work at a hospital and the wifi is not password protected and my mini connects fine at home. Please help!
Some of these won't apply to your situation.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Execute Inventory with Cycle-Counting Method and by Quants
Hi Gurus,
I would like to Implement the Inventory by quant on WM.
This is because I would like to Inventory only 1 material per Bin.
I found transaction LICC, but when I try to activate the Document an error message say that the Inventory Document Range (LVS_IVNUM) does not exist.
How can I create this range? Have you got a manual for this implementation?
Another Question: the Inventory count is allready implemented and there is still a range of Inventory Documents created and managed by LI01N, LX26..the Cycle Counting by quants can interferate with the one allready implemented?
Thanks & Regards,
SimoneHi,
For the LICC issue I had same problem. Direct in production you need to maintain number ranges in LN05 for your warehouse.
Thanks. -
I can't remember my mac mini password and can only log in under test, please help
I can't remeber my Mac mini password and can only log in under Test. Please help me as I would like to access my photos and personal information. Thanks
Forgot Your Account Password
For Snow Leopard and earlier
Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
If you do not receive a "Filesystem OK" message then repeat this command until
you do. If after seven tries you still do not receive a "Filesystem OK" message,
then the system is corrupted and needs to be reinstalled.
mount -uw /
cd /private/var/db/netinfo
mv local.nidb local.old
rm ../.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
1. Type fsck -fy
2. Type mount -uw /
3. Type passwd <username>
I have never tried this method myself.
Maybe you are looking for
-
In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array. Thank you. Solved! Go to Solution. Attachments: TEMP.vi 25 KB
-
[Oracle 8i] Need help pruning branches from a hierarchical query
My problem is that my hierarchical query seems only to trim out the values that don't meet my criteria, but still includes their children. When my query hits a record that does not meet my criteria, I want it to stop there. I've tried including the c
-
I just downloaded three products in the Adobe Exchange and two of them I paid for. The free one works, but when I start photoshop the exchange panel tells me there is an error loading and to check my internet connection (which is fine)... the one fre
-
Sqlldr; restrict count of rows
How can I restrict the count of rows to load. The skip option allows to skip the first rows, but how can I stop if a defined count of rows is loaded? I need that for testing Thanks for your help. Frank
-
Consuming a jms queue from a multithread application
Hi Thank you for reading my post. I have an application which shuld consume message of a queue. my application is multithread and what i want to know is: - How i can ask queue to remove a message after my thread finished its work with the message, by