Battery for Brand New MacBook Pro 17"

Hello,
I just purchased a new MacBook Pro 17".
What do I do with battery charing for the first use?
Apple's official battery resource: http://www.apple.com/batteries/notebooks.html does not effectively answer the question.
It writes "Be sure to fully charge your portable when you plug it in for the first time, and then run Software Update to ensure you have the latest software."
The question then is, do I run down the battery completely the first time (but never plugging it in), and then when it goes to sleep, charge it all the way up to full?
I basically want to know what to do for the first time - how long do I let the battery run down if at all?
Thank you

Here's the dirty little secret about lithium batteries: Heat & frequent full discharge/recharge cycles are the two biggest killers of these batteries. Fact is, lithium batteries really don't like to be discharged below 40% of capacity very often. I'm typing this on a 4 1/2 year old MacBook Pro, and my battery is still going strong. It's fine to leave it plugged in all the time, that's what I do. Once every two-three months, I discharge it to about 40% & then recharge. So, charge yours till full, and try to never fully discharge the battery.

Similar Messages

  • Startup disk almost full for brand new Macbook Pro with Mavericks

    I recently purchased a brand new Macbook Pro Retina that runs on Mavericks.  I keep getting a message saying that my start up disk is almost full, even though I have almost no files on the hard drive other than whatever was pre-installed by Apple. Does anyone know how to resolve this problem?

    OmniDisksweeper can help you find what's hogging your disk space, or help determinie if this is a bogus message.

  • Word Processing Software for brand new MacBook Pro

    Is it possible that my new MacBook Pro doesn't come with any word processing software? I never thought to ask about this before making my purchase.  I'm new to Apple--just came over from the PC darkside--and would love some help on this.  Thanks!

    Ronda mentions TextEdit and whilst it is not as sophisticated as some high end word processing software, it does have more ability than a lot of people realize. Most people have not taken the time to explore it.
    Peruse some of its features in the following link. It may be enough to suit your needs.
    The case for using TextEdit as your word processor, Part 1

  • Clean Install of Lion on SSD For Brand New Macbook Pro

    I'm considering purchasing the base model of the current 13" Macbook Pro.  If I do, I'm planning on purchasing an SSD (most likely a Crucial model) and installing it.  My question is, before installing the SSD, do I need to format the SSD?  Additionally, am I able to simply install the SSD and then install Lion through the internet recovery option?  Finally, can I do all of this before ever turning the Macbook Pro on with the shipped HDD?  Or do I need to turn it on once just to register the OS and the iLife Suite to me so that I will be able to redownload them to the new SSD?  Any advice you can offer would be greatly appreciated.

    Here's an answer for you.
    Buy an external usb enclosure. About $10.
    Install your new SSD in that enclosure.
    Open disk utility and format/erase your SSD using MAC OS Extended Journaled.
    Once that's done, open Carbon Copy (free download if you don't have it).
    Clone your old drive to your new drive.  You will get a pop up message saying that your new drive doesn't have a Lion Recovery Partition.  Create one using Carbon Copy then proceed with the clone.
    After all is done, take out your old hard drive and install your new SSD in your Macbook.
    Install your old drive to your external enclosure for back up purposes.
    Turn on your Macbook and you're done.

  • I bought a brand new MacBook Pro Mid 2014, and my battery cycle count is on 2!!

    As I said on the question, a brand new MacBook Pro I bought recently which I haven't even put on charge yet already has a cycle count of 2!
    I'm just curious if this is normal and I want to make sure that I received a brand "new" one not a refurbished one.
    Did anyone else order a new laptop and have cycle charge of 2 or more and is this normal or not?

    The factory charges the battery, one cycle, they may then test that particular MacBook Pro as part of the production testing and it ends up with another cycle.  Two cycles is not something to worry about.  If you bought the unit from an Apple store or directly from Apple, it will not be a refurbished MBPr unless they specifically said it was.  They don't do things like that.

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • I have a brand new macbook pro 15" with latest Lion.Can anyone tell me why, when I open word or preview etc that multiple files open?For eg if I open a word doc, the last 1-3 docs that I have worked on all open. why?

    I have a brand new macbook pro 15" with latest Lion. Can anyone tell me why, when I open word or preview etc that multiple files open?For eg if I open a word doc, the last 1-3 docs that I have worked previously on all open. Can anyone tell me why?

    You have a choice as to whether or not applications in Lion like Word or Preview (or even Safari) save and re-open previous documents or windows... just hold down the option key while quitting a program and when you re-open it you won't get the previous documents or windows when you re-open the application. You can see this by selecting the open program in the menu bar and when holding down the option key the quit function will change to quit and discard open windows. This feature in Lion is referred to as "Resume" and is great if you want to restart an app and return to what you're doing (for example in Safari re-opening existing windows and tabs from your previous session). You still have the option to close individual windows within an app before quitting and they will not re-open when the app is launched again.
    This Resume function is not related to saving your work (a word or text document for example). This is handled by Lion's "Auto-Save" and "Versions" functions. See http://www.apple.com/ca/macosx/whats-new/auto-save.html
    Hopefully this is the complete answer you're looking for.

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • Brand new macbook pro 2012 (no retina display) 95% battery health with 5 cycles? is that okay?

    I know, another battery related question. I have recently bought a brand new macbook pro (no retina display), I calibrated the battery at least twice since Ive had it and it states that I am at 95% battery health with only 5 charges. Is that normal or should I bring my macbook in to be checked? Id like to get this settled before school starts in September since I depend on my macbook a great deal.
    thanks !

    Full cycle? 100%, of course.
    How you get there is another matter. It can be a battery killing full discharge that will certainly ensure a brief life. Or a leisure set of discharges down to 20%, 30% or more. When they all sum up 100%, winner! You've got a cycle!!
    Apple recommends you enjoy your Mac and don't obsess too much on battery stuff. Just exercise the electrons every so often by bringing it down to, say, 20% and charge it back up. Going all the way down to the bitter end, when the Mac forces itself to sleep is sort of ok too and won't do (too much) damage, provided you don't make it an engrained habit. We all forget the power brick occasionally and get caught out in the wild with whatever charge was left inside.

  • What is the reasonable battery count cycle for a new macbook pro?

    what is the reasonable battery count cycle for a new macbook pro? I just bought it and i found that the count cycle for the battery is 6, is that normal?

    First off, a MacBook Pro is not a Power Mac.  Power Mac is the nomenclature for Apple desktop machines prior to mid-2006.   Mac Pros also are desktops, but later than mid-2006.    http://www.apple.com/batteries/ covers Apple notebook batteries and other battery performance.  I've asked this thread be moved.

  • My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
    In the meantime, can attempt an SMC Reset to see if it helps.

  • Why does my brand new MacBook pro have 13 cycles on the battery right out of the box?

    Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.

    horn0371 wrote:
    Why does my brand new MacBook pro have 13 cycles on the battery right out of the box? Shouldn't it have 0 because it's brand new.
    Yes it should have 0.  I would return it, that means that the battery has already went through 13 full cycles.  Perhaps they accidentally resold a returned one as new.

  • My brand new MacBook Pro won't turn on. What's the deal with this?

    I got the thing yesterday. Sat down with it last night and everything started up fine. I set up my account and then it was time for updates. Naturally, I said yes to the updates. They downloaded, they installed, and that was the last time my brand new MacBook Pro turned on. I've checked to see that the battery is fully charged. I've tried plugging into other outlets. I've tried removing the battery and the power cord and pressing the power button for 5 seconds. Nothing has worked. When I put my ear up to it while pressing the power button, I can hear it try to start and get about 2-3 seconds in to start up and then a click and nothing. Does anybody have any idea what the heck has happened here?
    15" MacBook Pro   Mac OS X (10.4.6)  
    15" MacBook Pro   Mac OS X (10.4.6)  

    actually i pass the 15 first days, i bought the mac in may, but here in spain the electronic components have a 2 years guarantee, i'll took to the store i bought soon couse it`s no normal so much hot

  • Leopard Install on Brand New MacBook Pro?

    Hey guy's, I got my first Mac today. A lovely brand new Macbook Pro. I got a copy of Leopard in the box and have run an upgrade.
    Was this right? As the computer is new with nothing on it and I have nothing to import of another Mac onto it should I just do a complete erase and install?
    What's the best option?

    wow thanks for the very fast reply! I'll stick with it then and see how it goes. I love the thing though. It's very sexy!! Bit peed that they bumped the 7200rpm drive up to 200GB today but never mind, not fussed by the CPU as it'll only use the battery more and this thing is fast enough!
    Will the upgrade convert all the OS into the full 64bit?

  • Strange wifi problem on a brand-new MacBook Pro

    Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
    So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
    Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
    One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
    So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
    I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
    Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

    Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
    mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
    Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

Maybe you are looking for

  • Using System::ErrorDescription in Insert statement

    Hello, I want to insert System::ErrorDescription to store the error in the customized log table. When I use the following statement, it does not insert anything. What am i doing wrong. Please advice. create table dbo.load_err(load_err_id integer(PK),

  • Problem in crystal reports

    Hello i have a problem in crystal report, i want to dispaly data from MYSql data base to crystal report through my application I have'nt work on crystall report before this please help me..... thanks in advance

  • Applications Related ------ URGENT

    How can i get into the Oracle Applications Forum ? Can any one guide me ?

  • 10.4.11 MacBook Pro

    I have a Linksys WAP with WPA. Intermittenly this laptop won't connect with an error saying "The selected network uses an Access Control List to restrict access and your device is not on the list". Completely wrong as the access point doesn't even HA

  • 6i installs ok? but no 8i database created?

    We are updating our oracle system. Clean install on a P4 with Win XP pro. 9i personal database rel 2 installed in OraHome92. 9i appears to be running ok. This will be used to develop against. 6i Internet Developer was then installed in oracle homes O