Battery Health: Check Battery

Mid-2010 Macbook Pro. I use the app Watts to alert me as to when I need to condition the internal battery, which is done on a monthly basis. Just yesterday, right before the regularly scheduled monthly conditioning reminder was seen, I happened to click on the battery icon in the menu bar. In the drop down window was a yellow triangle with an exclamation point in it along with the words "Battery Health: Check Battery". At first I didn't think much about it, as soon afterwards the Watts app kicked in to remind me of the upcoming conditioning.
The conditioning has been done as per Watts' suggestion but the yellow triangle is still there.
Clicking on it brought me to an Apple support page (HT3782) for the battery menu extra bar, where the exact wording of the alert on my Macbook is not seen nor mentioned. Just as a precaution I've followed the steps suggested *prior* to resetting the SMC (sleep, restart, shutdown). The yellow triangle remains.
What's a Macbook Pro owner to do at this point?

Current Battery Cycle count is 538. Full charge capacity (mAh): 4273.
The laptop was purchased in October 2010 with Apple Care. What puzzled me was not being able to verify the meaning of the particular message in the battery extra menu bar.
If in fact this installed battery is at its expected life's end and a replacement is warranted, it's a blessing in disguise, as it has never performed anywhere near its nominal estimated life: despite efforts on my part to monitor screen brightness, turn BlueTooth off, quit unused applications and turn WiFi off when connected to Ethernet I've never been able to get more than 5 hours' use out of a fully-charged battery.
Thanks, leroydouglas and mende1 for the prompt replies and suggestions!

Similar Messages

Turning Off The Alert - Notebook PC Battery Replacement Program Alert in Health Check.

I want to turn off the Notebook PC Battery Replacement Program Alert in Health Check. It continues to alert me for months now. This is driving me batty since I have checked it 3 times and it is not included in the recall! I have a HP Pavillion dv6000 running Windows Vista Home Premium Edition. Any help to turn this darn alert off permanently would be very helpful. Thanks.

Thank you to all who have read this post so far. Please continue to contact HP directly using the above information.
Matthew|Community Advocate | Best Buy® Corporate
Visit our Channel on
Private Message

HT3782 What does it mean "Battery Health" Check battery in the battery menu bar?

What does it mean "Battery Health" Check battery in the battery menu bar?

Check the full status by going to the apple in the left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about the Cycle count, Battery Condition, Battery Capacisty, charge remaining.
Condition should be Normal or there is a problem
Ratio of charge remaining to cpacity should be close, round off, to the reported battery charge percentage.
Cycle count tells how many charge cycles the battery has been through, typical lifetime cycle count for a current generation battery is 1,000 cycles.

Battery was replaced but error still appears in the HP health check

The HP health check shows the HP Notebook PC Battery Pack needs to be replaced. I have a HP Pavilion Entertainment and I did replace the battery but the message still appears. Any suggestions as to how to stop the message from appearing?

full charge, then let the battery FULLY depleat, this will teach the computerto read the battery properly,

How can I support a health check, from a load balancer?

My company has load balancers which use health checks to determine if the end point is available for client traffic. The basic health check is a tcp ping, and will tell you if the device is on the network. The next level of health check is an http request. This request, and the response are static, you can’t create your own version of the request and response. The standard request is this:
     http://host:port/healthcheck/hc.html
The standard response is this:
     “The server is available”
I want to use the load balancer as part of my total deployment. The problem is that I am not seeing how to support this health check request and response in the MDEX engine. What I see is this request
     http://host:port/admin?op=ping
Will return this response
     dgraph <host>: <port> responding at <day month year time>
It is nice that there is a built in ping, but I am not able to make use of it. I am new to Endeca and still poking around. The dgraph process listens on a port set up in <…>/config/script/AppContext.xml
<dgraph id="Dgraph1" host-id="MDEXHost" port="3281">
<properties>
<property name="restartGroup" value="A" />
<property name="updateGroup" value="a" />
</properties>
<log-dir>./logs/dgraphs/Dgraph1</log-dir>
<input-dir>./data/dgraphs/Dgraph1/dgraph_input</input-dir>
<update-dir>./data/dgraphs/Dgraph1/dgraph_input/updates</update-dir>
</dgraph>
(I am not using the default port, as I only have an instance on a shared server and have to worry about port clashing. But that is a different thread.)
In a standard tc Server install I can support this health check by doing this:
* Create a directory named “healthcheck”, in the “webapps” directory.
* Place a file name “hc.html” in that directory, which contains “The server is available”
The one hack which comes to mind is to write a servlet which would be able to be a smart proxy for the load balancer health check. It would pass along any regular traffic to the MDEX engine. But if the request was a health check it would send “admin?op=ping” to the MDEX engine, and for a good response from the engine, create and pass back the correct response to the load balancer.
Ideas, comments, flames, …
Thanks

Hi, we are using following String to test the MDEX ping response but we get the invalid version formation on dgraph.log -
following is on F5
GET /admin?op=ping HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n
Following gets logged on Dgraph.log
WARN 09/05/12 05:30:03.799 UTC (1346823003799) DGRAPH {dgraph} Invalid version format in 'HTTP/1.1/r/nHost:myhost.endeca.com:19000/r/nConnection:close/r/n/r/n'
Please let me know - if you have any suggestions to solve this issue.
I know that it works from browser and wget from unix with following commands.
wget http://myhost.endeca.com:19000/admin?op=ping - from unix command line
from browser:
http://myhost.endeca.com:19000/admin?op=ping
Thanks,
Ram

Health Check in Exchange 2007 Scripting

Hi All,
I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in extracting some
more information:
1. Mailbox Store Size, Free Diskspace percentage for mailbox servers
2. Remote Mail flow Tests & Mailflow test to every exchange 2007 mailbox servers in org.
3. Automating Email of collected data (in HTML) to Administrator.
4. Executing the script Automatically without triggering it from Exchange Management Shell.
Script Below
param( [string] $auditlist)
Function Get-CustomHTML ($Header){
$Report = @"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html><head><title>$($Header)</title>
<META http-equiv=Content-Type content='text/html; charset=windows-1252'>
<meta name="save" content="history">
<style type="text/css">
DIV .expando {DISPLAY: block; FONT-WEIGHT: normal; FONT-SIZE: 8pt; RIGHT: 8px; COLOR: #ffffff; FONT-FAMILY: Arial; POSITION: absolute; TEXT-DECORATION: underline}
TABLE {TABLE-LAYOUT: fixed; FONT-SIZE: 100%; WIDTH: 100%}
*{margin:0}
.dspcont { display:none; BORDER-RIGHT: #B1BABF 1px solid; BORDER-TOP: #B1BABF 1px solid; PADDING-LEFT: 16px; FONT-SIZE: 8pt;MARGIN-BOTTOM: -1px; PADDING-BOTTOM: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; WIDTH: 95%; COLOR: #000000; MARGIN-RIGHT:
0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; BACKGROUND-COLOR: #f9f9f9}
.filler {BORDER-RIGHT: medium none; BORDER-TOP: medium none; DISPLAY: block; BACKGROUND: none transparent scroll repeat 0% 0%; MARGIN-BOTTOM: -1px; FONT: 100%/8px Tahoma; MARGIN-LEFT: 43px; BORDER-LEFT: medium none; COLOR: #ffffff; MARGIN-RIGHT: 0px; PADDING-TOP:
4px; BORDER-BOTTOM: medium none; POSITION: relative}
.save{behavior:url(#default#savehistory);}
.dspcont1{ display:none}
a.dsphead0 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#FFFFFF; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #CC0000}
a.dsphead1 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead2 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead1 span.dspchar{font-family:monospace;font-weight:normal;}
td {VERTICAL-ALIGN: TOP; FONT-FAMILY: Tahoma}
th {VERTICAL-ALIGN: TOP; COLOR: #CC0000; TEXT-ALIGN: left}
BODY {margin-left: 4pt}
BODY {margin-right: 4pt}
BODY {margin-top: 6pt}
</style>
<script type="text/javascript">
function dsp(loc){
   if(document.getElementById){
      var foc=loc.firstChild;
      foc=loc.firstChild.innerHTML?
         loc.firstChild:
         loc.firstChild.nextSibling;
      foc.innerHTML=foc.innerHTML=='hide'?'show':'hide';
      foc=loc.parentNode.nextSibling.style?
         loc.parentNode.nextSibling:
         loc.parentNode.nextSibling.nextSibling;
      foc.style.display=foc.style.display=='block'?'none':'block';}}
if(!document.getElementById)
   document.write('<style type="text/css">\n'+'.dspcont{display:block;}\n'+ '</style>');
</script>
</head>
<body>
<b><font face="Arial" size="5">$($Header)</font></b><hr size="8" color="#CC0000">
<font face="Arial" size="1"><b>Version 1 |M & C | <A HREF='http://mail.exchange.com'>mail.exchange.com</A></b></font><br>
<font face="Arial" size="1">Report created on $(Get-Date)</font>
<div class="filler"></div>
<div class="filler"></div>
<div class="filler"></div>
<div class="save">
Return $Report
Function Get-CustomHeader0 ($Title){
$Report = @"
<div class="dspcont0">
<h1><a href="javascript:void(0)" class="dsphead0" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h1>
<div class="dspcont0">
Return $Report
Function Get-CustomHeader ($Num, $Title){
$Report = @"
<h2><a href="javascript:void(0)" class="dsphead$($Num)" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h2>
<div class="dspcont">
Return $Report
Function Get-CustomHeaderClose{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHeader0Close{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHTMLClose{
$Report = @"
</div>
</body>
</html>
Return $Report
Function Get-HTMLTable{
param([array]$Content)
$HTMLTable = $Content | ConvertTo-Html
$HTMLTable = $HTMLTable -replace '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">', ""
$HTMLTable = $HTMLTable -replace '<html xmlns="http://www.w3.org/1999/xhtml">', ""
$HTMLTable = $HTMLTable -replace '<head>', ""
$HTMLTable = $HTMLTable -replace '<title>HTML TABLE</title>', ""
$HTMLTable = $HTMLTable -replace '<', "<"
$HTMLTable = $HTMLTable -replace '>', ">"
$HTMLTable = $HTMLTable -replace '</head><body>', ""
$HTMLTable = $HTMLTable -replace '</body></html>', ""
Return $HTMLTable
Function Get-HTMLLink ($activeURL){
$Report = @"
<a href=$activeURL>$activeURL</a>
Return $Report
Function Get-Ink ([String]$inData){
[String]$inclPercentage = @(35..100)
$positive = ($inclPercentage, 'Success', 'Ready', 'Running', 'OK', 'True', 'Information')
If ($positive -match $inData)
$Report = @"
<font color='#009900'>$inData</font>
Else
$Report = @"
<font color='#FF0000'>$inData</font>
Return $Report
Function Get-HTMLBasic ($Detail){
$Report = @"
<TABLE>
<tr>
  <td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
Function Get-HTMLDetail ($Heading, $Detail){
$Report = @"
<TABLE>
<tr>
<th width='25%'><b>$Heading</b></font></th>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
$input | foreach {$targets += @($_)}
If ((Test-Path variable:\targets) -eq $True){
   Write-Host "Server list input detected on pipeline" -ForegroundColor Yellow
Else{
if ($auditlist -eq ""){
   Write-Host "No server list specified, getting all Exchange 2007 servers" -ForegroundColor Yellow
   $targets = Get-ExchangeServer | Where-Object {$_.IsExchange2007OrLater -eq $True}
  else
   if ((Test-Path $auditlist) -eq $false)
    Write-Host "Invalid server list specified: $auditlist" -ForegroundColor DarkRed
    exit
   else
    Write-Host "Using Audit list: $auditlist" -ForegroundColor Cyan
    $Targets = Get-Content $auditlist
$now = Get-Date
#Custom Expressions
$latencyMS = @{Name="Latency(MS)";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$MessageLatencyTime = @{Name="MessageLatencyTime";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$hotLink = @{Name="URL";expression={Get-HTMLLink ($_.URL)}}
$colourResult = @{Name="Result";expression={Get-Ink ($_.Result)}}
$colourStatus = @{Name="Status";expression={Get-Ink ($_.Status)}}
$colourType = @{Name="Status";expression={Get-Ink ($_.Type)}}
$newResult = @{Name="Result";expression={If ($_.Result.ToString() -ne 'Success'){Get-Ink ('Failure')} Else {Get-Ink ('Success') }}}
$fullReport = Get-CustomHTML "Exchange 2007 "
$fullReport += Get-CustomHTMLClose
Foreach ($Target in $Targets){
Write-Host "Collating Detail for $Target" -ForegroundColor Yellow
Write-Host "..getting basic computer configuration"
$ComputerSystem = Get-WmiObject -computername $Target Win32_ComputerSystem
switch ($ComputerSystem.DomainRole){
  0 { $ComputerRole = "Standalone Workstation" }
  1 { $ComputerRole = "Member Workstation" }
  2 { $ComputerRole = "Standalone Server" }
  3 { $ComputerRole = "Member Server" }
  4 { $ComputerRole = "Domain Controller" }
  5 { $ComputerRole = "Domain Controller" }
  default { $ComputerRole = "Information not available" }
$OperatingSystems = Get-WmiObject -computername $Target Win32_OperatingSystem
$TimeZone = Get-WmiObject -computername $Target Win32_Timezone
$Keyboards = Get-WmiObject -computername $Target Win32_Keyboard
$SchedTasks = Get-WmiObject -computername $Target Win32_ScheduledJob
$BootINI = $OperatingSystems.SystemDrive + "boot.ini"
$RecoveryOptions = Get-WmiObject -computername $Target Win32_OSRecoveryConfiguration
$exServer = Get-ExchangeServer | where {$_.Name -eq "$Target"}
$exVersion = "Version " + $exServer.AdminDisplayVersion.Major + "." + $exServer.AdminDisplayVersion.Minor + " (Build " + $exServer.AdminDisplayVersion.Build + "." + $exServer.AdminDisplayVersion.Revision + ")"
switch ($ComputerRole){
  "Member Workstation" { $CompType = "Computer Domain"; break }
  "Domain Controller" { $CompType = "Computer Domain"; break }
  "Member Server" { $CompType = "Computer Domain"; break }
  default { $CompType = "Computer Workgroup"; break }
$LBTime=$OperatingSystems.ConvertToDateTime($OperatingSystems.Lastbootuptime)
$MyReport += Get-CustomHeader0 "$Target - Role(s): $($exServer.ServerRole)"
$MyReport += Get-CustomHeader "2" "Basic Server Information"
  $MyReport += Get-HTMLDetail "Computer Name" ($ComputerSystem.Name)
  $MyReport += Get-HTMLDetail "Computer Role" ($ComputerRole)
  $MyReport += Get-HTMLDetail "Exchange Role(s)" ($exServer.ServerRole)
  $MyReport += Get-HTMLDetail "Last System Boot" ($LBTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting logical disk configuration"
  $Disks = Get-WmiObject -ComputerName $Target Win32_LogicalDisk
  $MyReport += Get-CustomHeader "2" "Logical Disk Configuration"
   $LogicalDrives = @()
   Foreach ($LDrive in ($Disks | Where {$_.DriveType -eq 3})){
    $Details = "" | Select "Drive Letter", Label, "File System", "Disk Size (GB)", "Disk Free Space", "% Free Space"
    $Details."Drive Letter" = $LDrive.DeviceID
    $Details.Label = $LDrive.VolumeName
    $Details."File System" = $LDrive.FileSystem
    $Details."Disk Size (GB)" = [math]::round(($LDrive.size / 1GB))
    $Details."Disk Free Space" = [math]::round(($LDrive.FreeSpace / 1GB))
    $Details."% Free Space" = Get-Ink ([Math]::Round(($LDrive.FreeSpace /1GB) / ($LDrive.Size / 1GB) * 100))
    $LogicalDrives += $Details
   $MyReport += Get-HTMLTable ($LogicalDrives)
  $MyReport += Get-CustomHeaderClose
  if ($exServer.ServerRole -like "*ClientAccess*")
  {$MyReport += Get-CustomHeader "2" "OWA Connectivity"
   Write-Host "..performing OWA connectivity test"
   $colOWAResults = Test-OwaConnectivity -ClientAccessServer $Target
   $MyReport += Get-HTMLTable ($colOWAResults | select MailboxServer, $hotLink, Scenario, $colourResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
Write-Host "..getting queue details"
  if ($exServer.ServerRole -like "*HubTransport*")
  $MyReport += Get-CustomHeader "2" "Queue Information"
  $colQs = Get-Queue -server $Target
  $MyReport += Get-HTMLTable ($colQs | Select-Object NextHopDomain, $colourStatus, MessageCount, NextRetryTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting mailbox database information"
  $spaceLog=[System.Diagnostics.EventLog]::GetEventLogs($target) | where {($_.LogDisplayName -eq "Application")}
  $db = @{Name="database";Expression={$_.ReplacementStrings[1]}}
  $freeMB = @{Name="MB";Expression={[int]$_.ReplacementStrings[0]}}
  $whiteSpace = $spaceLog.entries | where {($_.TimeWritten -ge $now.AddDays(-1))} | where {($_.EventID -eq "1221")} | select $db,$freeMB
  $ws = @{Name="White Space";expression={}}
  if ($exServer.ServerRole -like "*Mailbox*")
   $MyReport += Get-CustomHeader "2" "Mailbox Stores"
   $colMailboxStores = Get-MailboxDatabase -Server $Target -Status | Sort-Object Name
   $storeTable = @()
   Foreach ($objMailboxStore in $colMailboxStores)
    [string]$totalUsers = (get-mailbox -database $objMailboxStore).count
    [string]$empty = $totalUsers.Length -eq 0
    if ($empty -eq 'True')
     [string]$totalUsers = "0"
    $storeDetails = "" | Select Name, Mounted, "Total Users", "White Space", LastFullBackup
    $storeDetails.Name = $objMailboxStore.Name
    $storeDetails.Mounted = Get-Ink ($objMailboxStore.Mounted)
    $storeDetails."Total Users" = $totalUsers
    $storeDetails."White Space" = (($whitespace | where {$_.database -match $objMailboxStore.Name} | select -last 1).mb)
    $storeDetails.LastFullBackup = $objMailboxStore.LastFullBackup
    $storeTable += $storeDetails
    $MyReport += Get-HTMLTable ($storeTable)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "MAPI Connectivity"
   Write-Host "..performing MAPI connectivity test"
   $colMAPIResults = Test-MAPIConnectivity -Server $Target
    $MyReport += Get-HTMLTable ($colMAPIResults | select Database, $newResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "Mailflow Test"
   Write-Host "..performing Mailflow test"
   $colMailflowResults = Test-Mailflow -Server $Target
    $MyReport += Get-HTMLTable ($colMailflowResults | select TestMailflowResult, $MessageLatencyTime)
   $MyReport += Get-CustomHeaderClose
  Write-Host "..getting Exchange services"
  $ListOfServices = (gwmi -computer $Target -query "select * from win32_service where Name like 'MSExchange%' or Name like 'IIS%' or Name like 'SMTP%' or Name like 'POP%' or Name like 'W3SVC%'")
  $MyReport += Get-CustomHeader "2" "Exchange Services"
   $Services = @()
   Foreach ($Service in $ListOfServices){
    $Details = "" | Select Name,Account,"Start Mode",State,"Expected State"
    $Details.Name = $Service.Caption
    $Details.Account = $Service.Startname
    $Details."Start Mode" = $Service.StartMode
    If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Disabled")
      If ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Disabled")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Manual")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
     If ($Service.State -eq "Paused")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
    $Services += $Details
    $MyReport += Get-HTMLTable ($Services)
   $MyReport += Get-CustomHeaderClose
    $eventLogs=[System.Diagnostics.EventLog]::GetEventLogs($Target) | where {($_.LogDisplayName -eq "Application") -OR ($_.LogDisplayName -eq "System")}
    $warningEvents = @()
    $errorEvents = @()
    $LogSettings = @()
$MyReport += Get-CustomHTMLClose
$fullReport += $MyReport
$MyReport = $null
$Date = Get-Date
$Filename = ".\" + "Exchange_Health" + "_" + $date.Hour + $date.Minute + "_" + $Date.Day + "-" + $Date.Month + "-" + $Date.Year + ".htm"
$fullReport | out-file -encoding ASCII -filepath $Filename
Write "Audit saved as $Filename"
Invoke-Item $Filename

please refer to my scripts below, it should get you started.
http://www.myexchangeworld.com/2010/03/powershell-disk-space-html-email-report/
http://www.myexchangeworld.com/2010/07/powershell-script-to-monitor-exchange-server-2010-services-email-report/
you can customsise this to your needs and add relevant information.
cheers
thiyagu
Thiyagu | MCTS/MCITP - Exchange 2007 | MCSE 2003[Messaging] | http://www.myExchangeWorld.com. This posting is provided "AS IS" with no warranties, and confers no rights.

1:N Replication Health Check

Hello,
When we run the check of 1:N Replication Health Check We are getting the following:
We cant replicate the tables mentioned in this report.
How should we proceed to fix this issue?
Thanks,
Amir

Hi Roy,
look at this note. it describes how to setup 1:n once you already created the config without "multiple usage" flagged.
Best,
Tobias
SAP Note 1898479:
SLT replication: Redefinition of existing DB triggers

In TOAD, Need to Enable DB Health check option

Hi,
I am using TOAD 10.1.1.8 DBA Suite.
As my TOAD DBA Suite, DB Health check option should be there under
Database -> Diagnose -> DB Health Check.
But its not showing this option.
Kindly guide me as How to enable DB Health check.
Expecting your valuable reply.
Thanks in advance,
Orahar.
Edited by: Orahar on Feb 10, 2010 3:06 PM

Sure.
As I didn't get any valuable response from TOAD Forum, I have posted here.
I hope, I will get the solution here at OTN.
Thanks.

How to health check time capsule disk

how to health check time capsule disk?
when doing time machine backuping and copying files into time capsule, it would take ages and very long time.. is the disk going to die soon?
is there anyway i can check the disk?
my time capsule is 2TB current model.
please help.
thank you.

Time Machine automatically checks the backups on the disk. It does a quick check (a few seconds) before every backup, and periodically (every month, I think) does a much more thorough check.
You can do that yourself, by holding the Alt/Option key while selecting the TM icon in your menubar, and selecting Verify Backups. That may take quite a while, if you have a lot of data. I'd recommend connecting via Ethernet, as it will still be slow, but 2-3 times faster than WIFI.

Health Check on 11.5.9

Hi Friends,
I want to do Health check on my E-Business suite 11.5.9(both Database and Application) please suggest how to do?
Regards,
Arun

Hi,
Hi Arun,
You can refer the following ML doc,
[Oracle Application Object Library Best Practices: E-Business Suite Diagnostic Tests Health Check Test|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=471667.1]
Thanks,
Anchorage :)Do NOT use this document and install the script since it is for R12 (you are on 11.5.9).
Regards,
Hussein

Vmware vsphere health check report v5.1.0

Hi,
I'm currently using the vmware vsphere health check report v5.1.0 script. I switched from another perl script to this and the report provide much more information. There is one thing that don't seem to work properly though..
I currently have a failed disk in my server and the report is showing "unknown" status next to 3 disk / disk day. If I run the other script I have used in the past, I have 3 alerts in red clearly showing that something has failed. Would any of you know why it's showing as unknown instead of critical in the report?
Old Script
o Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert: 0
o Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert: 0
o Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert: 0
o Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert: 0
New Report
BIOS 1 ABR Status 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
Cooling Unit 1 Cooling Zone 1 0 - Fully redundant
0
OK
Cooling Unit 2 Cooling Zone 2 0 - Fully redundant
0
OK
Cooling Unit 3 Cooling Zone 3 0 - Fully redundant
0
OK
Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert
0
UNKNOWN
Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert
0
OK

Thank you for the follow up. I do understand that a completly unreadable disk might throw an unknown status but the status is different from one report than the other. On one side, it clearly shows in red that the disk has something and on the side, it just throws a "I don't know what's going on with the disk". I ran both report the same day and i'm expecting some red in the report to warn me if a disk fail.
Is there a way to change that behavior from the health check script?

How to automate DB health check report using OEM 11g

Hi,
I have been asked to share the DB health check report using OEM 11g. Could you please let me know how to achieve this and the report should go to his email.
Thanks in advance,
Bala

check,
manually you can schedule it through dbms_hm
http://www.oracle.com/technetwork/articles/sql/11g-resiliency-091703.html

Oracle 9i (SE) Solaris 9 (DB Health check)

Hi Guys,
I want to compile a list that I can use for my Database health check. What are the things that I should add in this list which are very important. (pro active dba)
Thank you.

Not specific to your configuration but refer Metalink note 122669.1 in this regard.

SCOM health Check report

please suggest me how to generate SCOM health check report and automation for the same. I am using scom 2007 R2.
And need all windows servers health check report from scom as well...?

Hi
As a good starting point you could use these reports
http://www.systemcentercentral.com/scc-health-check-reports-management-pack-v2/ and some Details here
https://blogs.technet.com/b/kevinholman/archive/2010/07/21/system-center-central-some-really-cool-opsmgr-health-reports-available.aspx. Which give you a pretty good picture of your environment.
For a MG check up on the SQL side see here
http://blogs.technet.com/b/kevinholman/archive/2010/06/16/management-group-checkup-a-database-perspective.aspx
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

Early Health Check - missing data

Hi folks,
My Early Health Check reports are generated with a couple of data missed. For example, SQL expensives don't appear and also the CPU Graphics.
Do you guys know what it could be?
tks a lot
Re

Hello,
Here is a question, this same data should be in the Earlywatch Alert reports (EWA).
Is it in the EWA reports or is it missing there too?
The services are different, but report much of the same information, and the Early Watch Alert should have the same
data you mentioned is missing int he Early Watch Health Check.
So is it there or not?
Regards,
Paul

Battery Health: Check Battery

Similar Messages

Maybe you are looking for