Battery: I need to use it the right waY...

Hi, I'm a new iPad user and I've a question about the battery.
I'm using it this way: Charge at 100%, use to 0%, then charge again till 100% and so on. Is it the right way? May I use and charge the battery partially? (say: charge to 80%, then use to 30%, then charge till 100%, then use to 25% and so on).
Thank you.

Tpx wrote:
I'm using it this way: Charge at 100%, use to 0%, then charge again till 100% and so on. Is it the right way?
No, you don't need to do that all the time — Apple says this:
"*Use Your iPad Regularly*
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down)." (Source)
Tpx wrote:
May I use and charge the battery partially? (say: charge to 80%, then use to 30%, then charge till 100%, then use to 25% and so on).
Yes.

Similar Messages

Am i not using Cal the right way or is the application just not great?

I don't find the layout very convenient and clear.
All i see is a dot marking a daily event....
It is hard for me to quickly see which day has or not an event planned?
Anyway to have the days with event looking different than the ones w/o an event: Bold, color,...

xavier Pilsudski,
Are you refering to the Calendar application on your iPhone, or iCal on your computer?
On your computer you can color code events by putting them in different calendars. For example on my work iMac I have home as Blue, Work as Red. In addition I have an iPhone calendar in iCal which is green that all events created on the iPhone go to. Then I can sort them to the appropriate calendar in iCal.
Hope this helps,
Nathan C.

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Using StAX with xslt transformations in the right way?

Hi!
What do I need to enable the stax functionality to transformations, and which transformer implementations is supporting this? (or is the implementation irrelevant)
I have made the following to create a StaxSource, but is it enought?
---8<---
private static XMLInputFactory inputFactory = XMLInputFactory.newInstance();
    InputStream xmlInputStream = xmlUrl.openStream();
    XMLStreamReader xmlStreamReader = inputFactory.createXMLStreamReader( xmlInputStream );
    Source xmlSource = new StAXSource( xmlStreamReader );
transformer.transform(xmlSource, new StreamResult(writer));
---8<---I'm using:
org.apache.xalan.processor.TransformerFactoryImpland every thing seems to work very nice, but I'm not sure if I have done it in the right way and if it's something that I miss.
If I understand it correct normal transformations is transforming the xml to a Dom-tree but with StAX it shouldn't and be more memory efficient.
So anyone have any comments?
/Per

Indeed, as DrClap has already stated, using a StAXSource will not guarantee streaming. All of the mainstream XSLT processors build some sort of DOM structure internally because, in the general case, XSLT requires random access on the input document. The only exception to this is the identity transform, which in most processors is done in streaming fashion --i.e., without actually creating an intermediate structure.

Do I need to use all the hard drive for time machine or can I partition it

Do I need to use all the hard drive for time machine or can I partition it

You cannot partition a TC disk.
See pondini about mixing data and backups.. but remember this.. the TC has no way to back itself up and TM cannot backup files on the TC. Anything not backed up on the TC will be lost at some future point.
http://pondini.org/TM/TCQ3.html

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mod

For another program (WASY WGeo) after the working with PS CC I need a picture with the right colours in the end with 256 colours in 8 bit per picture - I still got it until yesterday. I don´t know what I´ve done wrong in PS CC but I´m still working in mode with 8 bit RYB. I controlled my result with Irfan View: it´s a picture with 16,7 million colours and 56 bit pp.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

New comer ask 2 simple questions:how to set the use of the right click of

New comer ask 2 simple questions:how to set the use of the right click of your mouse?
I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help
2.is there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
Not to sure about the score dude

The "right" way to handle multiple devices, accounts and the cloud?

Perhaps a bit premature, but I figure it's never too early to start planning.
Here's our current setup - I currently have four iDevices in the faily (three iPhones and one iPod Touch. All are syncing to the same Mac Mini, albeit with different logins (and different iTunes store ids). All four of these are kept in sync via Home Sharing so we have access to the music/apps/etc acquired by the others.
Enter the iCloud - how does this fit in? What's the *right* way to do this?
I can see two options:
1)     Continue to utilize four iTunes store ids, sync them via Home Sharing and add four iClouds
     Advantages
          totally independent devices, users, etc.
     Disadvantages
          must pay for four "iTunes Match" services to access non-iTunes music on each of the four devices
          will iTunes-purchased music automaticaly sync to iCloud if it is shared via Home Sharing (or only by the original purchaser)?
2)     Use one iTunes Store id for all iDevices
     Advantages
          single point of acquisition and distribution for all devices
     Disadvantages
          need to find a way to merge IDs (is this even possible?)
Are there other advantages/disadvantages to these options? Are there other options? What's the easiest to set up and support? Any other thoughts?
Thanks in advance for your input.

Well it seems like the first thing you should do is consolidate your iTunes libraries so that you don't have 4 copies of everything, one for each user logged in to your Mac Mini. How you do that is consolidate all 4 iTunes folders to one folder located in the /Users/Shared/ folder and update each of your iTunes to point to that folder accordingly. That way you have one iTunes library, only one copy of your media, but accessible from multiple users.
One caveat is that if somebody is logged on and has iTunes open, you can't fast switch to another user and open iTunes. Apple made it so that only one user and one instance of iTunes can open a iTunes library at a time.
For your iTunes match situation, it does sound like you would be much better off sharing a single Apple ID with one iTunes Match. For consolidating, make sure you have everything everybody has shared via Home Sharing to the main account you'd like to move over to, and then simply go to each device Settings, Store, and the sign out of the original Apple ID and logon using the shared main Apple ID. I just looked at it and the automatic downloading is already live in iOS! You can specify if you want to do music, apps, and books separately in case you may want to automatically download music but not apps or books.

Problem with slideshow in iPhoto. Photos look like they are all the right way up but when in slideshow action some are sideways.

even though all photos look like they are the right way up, when the slideshow commences, some of them display sideways. I have tried re-rotating them - and still have same problem. Help please - need it for Saturday night !

What version of iPhoto are you using? Are you creating the slideshow directly from an album or are you using the slideshow mode?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
OT

What's the "right" way to create a News list in CQ5.4?

Hey folks,
I'm a brand new CQ developer and, though I've done a lot of reading, I'm still in the dark on how to do a few things.
I'm currently working on a corporate website, and I need to build a News page. Each article contains a title and rich text (possibly including embedded images, videos, etc...), and the News page itself should display a paginated list of recent article summaries (with "read full article" links). I also need to show the two or three most recent article summaries on the site's front page, under a News heading.
I thought there'd be a pre-built component to cover this case, since most corporate sites include a News page of some sort, but I haven't found one. Am I missing it? I looked into the Blog page template, but I think that adapting that may be overkill.
I think that the right way to do this would be to build a News component with a Title and Rich Text field in the edit dialog. New articles could be created by dropping these components into the parsys of the News page. I could then create both a .html and a .summary view for the components and use a customized List component to display the summary list on the front page. Am I on the right track here, or am I overcomplicating it?
Thanks!
- Michael

Hi,
The "right" way of building any list-like component is to extend the existing List component.
That is referenced in this documentation page:
http://dev.day.com/docs/en/cq/current/wcm/default_components.html#List
You can find it under /libs/foundation/components/lists
To create, for example, a 'News List' component, just create a new component under your /apps/myproject/components, setting 'foundation/components/list' as sling:resourceSuperType ans add your custom script to display each news item. see also [1]
That way you canprovide more renderers to be used around your site(s)
[1] - http://dev.day.com/docs/en/cq/current/developing/components.html#Developing%20a%20new%20co mponent%20by%20adapting%20an%20existing%20%20%20%20%20component
Hope this helps,

[Solved]Bash:Manipulating arrays of paths? the right way or not?

Note: Refer to the following posts for better solutions and/or alternatives.
This is a mock segment of a script I'm writting and I need to know if I'm doing it the correct way or at least in a proper bash way...
the following works but will it always parse in a sorted manner. I have a set of directories that are named by date in the YYYY-MM-DD (International) format and want to be sure that they will always be treated as directory paths even when special characters "\n,\t,\s ...etc" are encountered in the path. The number of these directories changes and is compared to a set NUM-ber variable and when there are more than the set number the oldest ones are removed which brings a second question. Being dated as YYYY-MM-DD they sort from oldest to newest(lexicographical order) but do they always and is this the right way to deal with elements in an array separated by nulls? Any Comments or suggestions would be appreciated as I'm learning bash for the time being (perl is next) and gathered this from bits and peices on verious wikis and forums. I basically want know if this a correct approach to the subject of extracting and performing actions on elements of an array that are directory paths.
#!/bin/bash
oifs="$IFS"
IFS=$'\0'
DIRTREE=(/path/to/dated/directories/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]/)
NUM=5
HOWMANYMORE=$(echo $(( ${#DIRTREE[@]} - $NUM )))
if (( ${#DIRTREE[@]} > $NUM )) ; then
rm -rv "${DIRTREE[@]:0:$HOWMANYMORE}"
fi
IFS="$oifs"
Note:I have tested this for those wondering
Last edited by Thme (2012-11-30 16:58:13)

aesiris wrote:
there is a special syntax for appending elements to an array:
array+=(element1 element2 ...)
you can simplify to
NUM=3
combined=()
for dir in set1 set2 set3; do
new=(/home/maat/dateddirs/"$dir"/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]/)
(( count= ${#new[@]} - NUM ))
combined+=("${new[@]:0:$count}")
done
This works as really well, however, in my case I still need the other sets in separate arrays for other purposes in my personal script so I adapted the approach a little and got this which uses the array+=(foo) syntax properly now. I was aware of this feature in bash arrays and experimented with it but had no success adding elements from other arrays until you demonstrated it in your example by adding them though a "for loop" and doing the arithmetic there... My current one now is very similar...I'm not sure how to reduce it further if possible but I need the other arrays as I do something completely different with them:
#!/bin/bash
NUM=10
set1=(/home/maat/datedfolders/set1/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]/)
set2=(/home/maat/datedfolders/set2/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]/)
set3=(/home/maat/datedfolders/set3/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]/)
CT1=$(( ${#set1[@]} - NUM ))
CT2=$(( ${#set2[@]} - NUM ))
CT3=$(( ${#set3[@]} - NUM ))
for X in "${set1[@]:0:$CT1}" "${set2[@]:0:$CT2}" "${set3[@]:0:$CT3}"
do
combined+=("$X")
done
for
for Xdirs in "${combined[@]}"
do
rm -rv "$Xdirs"
done
I'm considering changing the title of this thread as it reveals a little more than I originally expected to go over and provides some pitfalls as well as ways to approach array manipulation which can be applied to wide range of uses in bash scripting. Others may find totally different uses for what we've discussed here so....
Last edited by Thme (2012-11-30 10:41:02)

Being Nice to your Layout manager - Is this the right way?

Ive written a custom component that basically provides multi-line text wrapping and a few other nice things.
I had a bit of trouble when I came to implementing
getPreferredSize() getMinimumSize() This is because ideally, I'd like the component to use as much space horizontally as possible, whilst using only as much vertical space as necessary.
To do this, I used the parents width as the minimum horizontal size. This then allowed me to work out the height.
Question is - is that the right way to do it? Other than that, I just cant think of a way to get the width I need when the component is first added to its container.
Cheers for any input,
Dave

If you want it to use as much horizontal space as possible, that means you want its width to be equal to its container's width (perhaps minus a bit for borders or something). So in that case you would have to set its minimum width to that number, and that's exactly what you did. There could be other ways to do it, but yours seems perfectly fine to me.

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

What is the right way to move a directory to another drive?

When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

Bazsl wrote:
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
That's something I just did successfully one hour ago...
I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
Do you try to move a folder with its subfolders ?

Battery: I need to use it the right waY...

Similar Messages

Maybe you are looking for