Battery indicator says not charging

My battery indicator says "not charging" when I am using the mag safe and the green light is on. When off the mag safe the battery is running down and I am currently at 18%.

Reset the SMC:
http://support.apple.com/kb/HT3964

Similar Messages

  • Battery icon says (Not Charging)...help?

    My battery icon says (not charging) and it won't charge. The battery is dead but the AC adaptor seems to work just fine. As soon as I unplug it results in the computer going off though. Any help?

    Hi and welcome to the Apple Discussions.
    First, make sure that you have the most updated firmware and battery update for your macbook. You can also try resetting the SMC of your computer. Here are the steps:
    http://docs.info.apple.com/article.html?artnum=303319

  • Skype Causing Battery to say "Not Charging"

    I just bought a new Macbook Pro.
    15", 8GB of Ram, 720 GB HDD with 7200 rpm, and 2.4 ghz i7 with antiglare screen.
    Anyways I find that whenever I use Skype, my Macbook stops charing and at the top it says "not charging".
    But as soon as I close Skype, it instantly starts charing and will recharge my battery in about an hour and  a half.
    I am running Lion 10.7.2 and have all update installed.
    Is anyone else having this issue with their Mac?

    Skype is a horrendous processor hog. It forces auto-switching to the power-hungry discrete GPU in any Mac that has one, and consumes such a huge share of the Mac's system resources that if anything else is drawing power at the same time, the machine may need more power than its AC adapter can provide. Battery charging is the first extra process to be discontinued under those conditions, allowing the power that was charging the battery to be used instead to meet the demands of Skype and whatever else is calling for power. This is normal, unfortunately.
    If you're going to use Skype when your battery needs charging, first quit all other apps, disconnect all bus-powered peripherals, turn down screen brightness as far as you can stand, turn off wifi and Bluetooth if you aren't using them, and consider installing gfxCardStatus to prevent auto-switching to the discrete GPU.

  • The battery icon says "Not Charging" and the light on the charger isn't lighting up either?

    I fell while my macbook was in my bag. It was already dead but when I went to put the charger in it wouldn't light up. To my surprise it still turned on but it said "(Not Charging)". I unplugged it multiple times and reset the PRAM and everything and it's still the same. It's as if I always need my macbook to be plugged in for it to work and not charge at all. Is it the internal battery? What else could I possibly do to resolve the issue?
    Battery Information:
      Model Information:
      Serial Number:          W0013U00WE1LA
      Manufacturer:          SMP
      Device name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          000a
      Cell Revision:          0165
      Charge Information:
      Charge remaining (mAh):          12
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          4505
      Health Information:
      Cycle count:          759
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          11036

    Try taking the battery out and looking at it. If you don't see any visible damage, put it back in and see if taking it out fixed the problem.

  • Battery Has the charging sign in it, but in brackets says (not charging)

    When the mains line is plugged in it works fine, but when you take it out the laptop just turns off, the battery also says (Not Charging) and when clicked says 0% battery.
    I'd like to know if this is to do with a dead battery, which is easily replaceable or something within the computer, because my friend had the same but on his battery it had a X/cross shape.
    Any feedback will be VERY helpful thanks.

    The easiest way to tell if the issue is with your battery or the computer is to take a known good battery and put it in this computer. Alternatively you can take this battery and put it in a MacBook that you know to be working correctly.
    Best of luck.

  • Macbook Air (2012) says "Not Charging" when magsafe2 first plugged in but then starts charging after a few seconds. Is that normal?

    Hi guys,
    I just purchased my first Apple notebook, the Macbook Air 13", last week and needless to say its a wonderful machine. However I've noticed that when I plug in the magsafe2 plug to charge the Air, the text next to battery icon says "Not Charging" for a few seconds (ranges from 1 to 3 seconds) before it disappears and the battery starts charging (the thunderbolt sign comes on). Seeing as this is my first Apple notebook I am unsure as to whether or not this behaviour is normal. I've searched the forums but have only been able to find one other case (w/o a solution).
    Thanks,
    Dave

    Hey Guys,
    Thanks for the info so far but now the time until it starts charging has increased to around 9 - 11 seconds, is this still normal?
    Thanks,
    Dave

  • Charging issues - display says not charging - but actually is!

    I have the O.G. version of ipad running ios5.1.1 and whenever I plug in the charger now - it says "charging device not supported", then battery display says "not charging" - not sure how to fix this, but if i leave it plugged into the computer instead of a wall socket it does very slowly trickle charge the battery.
    Anyone have any suggestions about why it's doing this and how to fix it?
    I have tried multiple different chargers in wall and different computers also with same result.

    The iPad charger is 10W
    The iPhone charger is only 5W
    Important to use thw 10W charger.
    Try a reset. Hold the Sleep and Home button down (together) for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • My iPod touch 5th generation battery indicator does not update when being charged (Updated to iOS 8)

    Note that the iPod touch 5th generation was updated to iOS 8. When I connect my charger to my iPod touch, for the first time, the battery indicator does not update when connected to a power source. Instead of being charged, it says that the battery is being depleted. Please fix this issue. Thank you!

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing.  Can anyone help?

    Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing.  Can anyone help?

    Hi, Michelle. Welcome to Apple Support Communities.
    Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

  • I just put a new battery into my MacBook and it sometimes says Not Charging when it is connected to a power adapter.

    Does anyone know what this might mean?  My battery just went down to 7 percent charge even though it had been connected to the power adapter for quite some time.  At least a few days.  I didn't notice that the battery wasn't charging.  Now it says it is charging again, but every once in a while I notice it has gone to not charging.  Any ideas?
    Thanks

    Oftentimes the travel chargers connectors and pins just build up dirt and grime. When it says not charging it's able to give enough power to function but not charge. Try wiping it down with a cloth!

  • My battery wont charge and my mac is brand new just says not charging will only work through charger

    the battery on my macbook air wont charge and will only work plugged into the charger its brand new only brought in july this year dont know why had to replace the charger as my son snapped the magnetic bit off it but now its saying not charging and turns off when i disconnect the charger dont know what to do as its brand new and ive only used it twice

    Try an SMC reset. See this link for instructions: http://support.apple.com/kb/ht3964

  • My info for battery charging says "Not Charging" when it is charging as per dashboard widget.

    My info for battery charging says "Not Charging" when it is charging as per dashboard widget. Since change to lion all slowed down do I need more ram ( have 2 gig). Lost  some icons in web site icons and other random icons. So far SL better.

    Yeah, it was purchased in August 2008. I'm not really sure what a charge cycle is, but I do plug it in and unplug it a lot to a power source. Mainly because I keep my computer on most of the time (either on or on sleep). So between taking it to classes and stuff, I'll recharge in between and when it's really low, otherwise I run it off the battery most of the time.
    On a sidenote, I have went to that information thing about about the battery after letting it sit plug in for a few hours, and now it has this information:
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-38ea-4762
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 61993
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 61993
    Health Information:
    Cycle count: 324
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1208
    Voltage (mV): 12129
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 60
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 2
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: No
    Charging: No
    Message was edited by: Akalboy
    Oh, forgot to note. Now the time remaining is 10 hours, which is DEFINITELY wrong.

  • When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

    When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

    There are two different types of adapters by Apple that look similar. One is a 5 Watt adapter used with iPhones and iPods. The other is a 10 Watt adapter used with the iPad. Other than looking at the text on the adapter, which is hard to read, you can tell the different by looking at the socket the pin part plugs into the adapter. The 5 Watt has two notches and the 10 Watt has only one notch.
    Make sure you use the 10 Watt adapter with an iPad.

  • Battery icon just says "not charging" full charge takes 9 hours :(

    Regardless if I select time or %, next to the battery icon just says "not charging". It does not read out how much time or % of battery life I have left. Also the battery went to zero and when I plugged it in, it says a full charge would be almost 9 hours....is this normal. The cyce count is 125 and condition is normal......thoughts? thanks

    I had a similar problem with my black macbook... I took it to the Genius bar and they determined that it was a faulty charger. The light on my charger would flicker orange/green/orange/green. sometimes no light at all. They replaced it. But since my battery had been recharged over 300 times, they replaced the battery as well. Since then---no problems with charging.

  • Macbook pro says not charging but still the battery is charging

    macbook pro says not charging but still the battery is charging

    This isn't reference in any of the online support material that I've seen. Do you have a link to support this? Just curious is all.
    I had a similar issue on my wife's '09 MBP. Initially I thought it was the battery seeing as it's an older machine, but we tried resetting the SMC (after a bunch of other suggestions) and that seems to have done the trick.

Maybe you are looking for

  • ADF Mobile Client: How to deploy application data to blackberry simulator

    Hiiiii If anybody knows how to deploy application data to blackberry simulator then let me know. I have developed one small application then i have published data and deployed appliction but when i run it on simulator it gives me following exception

  • PL/SQL Trying to update a table through trigger on the same table

    Hi everyone my name is Edwin and I'm new to this forum. I hope I can learn a lot from this community and over time contribute to it. The problem I'm facing at the moment is a tough one. I need to update a table (table a) with a value called block_id.

  • Creating a document in WCC

    Hi to all I'm fresh in WCC so I don't know how /is there a way / to create a new document /like MS word/ in WCC? I'm looking for solution to create a new document over some kind of form , where user can input some values and according to some templat

  • Copy Sales Order number in Accounting Document

    Dear Friends, In accounting document,when we click on G/L Account "Display Document:Line item" will appear.In this view there is an input Sales Order in Additional account assignments.Can anyone tell me how the value gets copied and what are the sett

  • The space at the top of the firefox has vanished

    there is to be a space at the top of firefox where i type url but it is no more there