Battery Information

Was using an iphone 5s
Would like to get some info from the communities.
1)Is letting a fully charged iphone plug in a good idea?The phone will use the battery or the power outlet as a supply when it is fully charged?
2)Will playing games on a Plugged in iphone ruin/damage the battery?
3)How do you know when the battery is fully charged? for ios6 the battery icon will have a plug sign, for IOS7 how to recognize that?
Thank you for answering my question.
I apology if i post it on a wrong thread as i am a new community user

1.  it's fine
2.  no
https://www.apple.com/batteries/iphone.html

Similar Messages

  • In system information, battery information for 17in m.b.p

    in system information, battery information for 17in m.b.p what should the readings be for a new battery,anyone, thanks peter

    If you want reliability and a battery that has a warranty, have Apple install it for you and pay the price.  If you want uncertainty and the possibility of a battery life of a month, a week or less, purchase a third party battery.
    To date I have yet to see with certitude a genuine Apple replacement battery offered to the public.  I have seen many tales of woe of users who have purchased third party batteries and have regretted the decision.  Often in the long run, these purchases cost more than an Apple battery.  Search these forums and my view will be substantiated.
    Your choice.
    Ciao.

  • Tecra Battery Information Tool - Cycles and Production Date

    Hi everybody,
    I am searching for a Battery Tool, which reads out the whole Battery information. Aspecially the Production Date, First used Date and charging cycles. Is there a tool available by Toshiba or another Freeware tool? Is there another possibility to read that information?
    Generally, does the Toshiba Battery capture this information? I only know the possibility to watch all this information from IBM, they use the BatteryMaximiser, which shows all the info. I have been searching the web but did not find anything. Please help.
    best regards
    Matty

    Hi,
    I need the information for an exact classification of the Battery. You do not get enough information about the Battery condition in the normal Power Management or in the Power Saver. There are tools which show the original and the available Battery capacity, but it is not possible to say anything about the remaining lifetime of the Battyery. So the information is quite important for me.
    best regards
    Matty
    [Edited by: admin]

  • How to get battery information for macbook air 13"

    Hi,
    I am using macbook air 13" released by the end of last year.
    For personal reason, I have to buy a new battery for my mba through the internet.
    So, how can I check the battery information (such as release day and last day of warranty) using its serial number?
    It is not easy to find such service in apple.com in case of macbook air battery.
    Thanks for your reply.
    Jonghun Park.

    That page supports for (as it mentioned below)
    iPhone, iPad, Mice and Trackpad, iSight, Portable Computers, AirPort, iPod, Displays, Xserve, Desktop Computers, Keyboards, Apple TV
    NOT FOR THE BATTERY EMBEDDED IN MACBOOK AIR!! :<
    (And the length of serial number of battery is longer than above HW products)
    Thanks for your answer, by the way.

  • Weird Battery informations

    Hi,
    Without any sort of previous symptoms, my battery indicates me bad informations (it began 2 days ago) : Please find below a copy/paste of the status of my battery :
    Informations sur le modèle :
    Nº de série : Sony-ASMB012-3702-ecba
    Fabricant : Sony
    Nom de l’appareil : : ASMB012
    Pack Lot Code : 0003
    PCB Lot Code : 0000
    Version du programme interne : 102a
    Révision du matériel : 0500
    Révision de pile : 0303
    Informations sur la charge :
    Charge restante (mAh) : 65336
    Charge complète : Oui
    En cours de chargement : Non
    Capacité de charge complète (mAh) : 65336
    Informations sur la santé :
    Comptage de cycles : 431
    Conditions : Bonne
    Batterie installée : Oui
    Intensité de courant (mA) : -1227
    Tension (mV) : 11598
    As you can see, my battery is always "fully charged" ... When I plug the macsafe, I'm not able to reload my battery (because it still indicates that there is no need to be charged). If I'm waiting for my computer to shut down (because of low batt), I'm able to reload it (with some difficulties because of bad informations).
    My battery has no particular problem, except for these bad informations.
    Is there anybody who shares such a problem, it there any way to "reset" my battery (I tried to reset the SMC, with no result) ...

    This is usually a sign of a bad battery - Capacité de charge complète (full charge capacity) should be 5000-5500 mAh for your machine, not 65336 mAh. Your Comptage de cycles (cycle count) is 431 - most Li-based batteries last 400-500 charge cycles. You will most likely need to purchase a replacement battery (Apple will not cover it under warranty/AppleCare with >300 cycles).

  • My mac is not charging, its been like this since morning. Battery Information:    Model Information:   Serial Number:     D86241503EVDKRNAL   Manufacturer:     SMP   Device Name:     bq20z451   Pack Lot Code:     0   PCB Lot Code:     0   Firmware Version

    Battery Information:
      Model Information:
      Serial Number:          D86241503EVDKRNAL
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          000a
      Cell Revision:          162
      Charge Information:
      Charge Remaining (mAh):          778
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          6178
      Health Information:
      Cycle Count:          95
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          7440
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          10
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          10
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      Current Power Source:          Yes
      DarkWakeBackgroundTasks:          1
      Display Sleep Uses Dim:          Yes
      PrioritizeNetworkReachabilityOverSleep:          0
      Standby Delay:          4200
      Standby Enabled:          1
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      AutoPowerOff Delay:          14400
      AutoPowerOff Enabled:          1
      DarkWakeBackgroundTasks:          0
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
      Standby Delay:          4200
      Standby Enabled:          1
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0000
      Revision:          0x0000
      Family:          0x0000
      Serial Number:          0x00000000
      Charging:          No

    Try doing a SMC RESET and see if that sorts it out for you - had to do that to my Macbook once and it worked for me.
    Good luck.

  • Macbook Battery Information

    Hi,
    I am looking for original Macbook Battery A1185 information of a new battery.
    Here's mine:
    Battery Information:
      Model Information:
      Manufacturer:          DP
      Device Name:          ASMB016
      Pack Lot Code:          2
      PCB Lot Code:          0
      Firmware Version:          110
      Hardware Revision:          500
      Cell Revision:          200
      Charge Information:
      Charge Remaining (mAh):          1347
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          4901
      Health Information:
      Cycle Count:          15
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -2364
    (once the ac adpator was connected this changed to:  Amperage (mA):          2002)
      Voltage (mV):          11009
    I wonder if the "genuine Macbook battery replacement I bought" is genuine and if it is new?

    It is an "original Apple Battery" A1185, sold as genuine and new.
    (Genuine Battery Apple A1185 A1181 MA561 MA566 13" White). I am currently charging it...
    Capacity is stated to be 97% (4901 mAh vs the design capacity 5020 mAh). I am not complaining since it only cost 38 € vs. the 120 € from apple shop. Just wondering if it is really an original or a very very good imitation. It has all stickers and numbers and looks identical to my old one which decided to swell to double size...

  • Macbook air battery information wrong

    Hello,
    I have a few questions. when I go to system report my battery information is wrong, when it is 100% charged it is said  Fully Charged: No. So I was wondering how can I fix this problem. Also is it alright to keep your early 2014 macbook air plugged in all the time? Like if it is fully charged can you still keep it on charge?
    Thank you.

    You can keep it plugged in after it reaches 100% charged but you shouldn't keep it plugged in 24 hours a day 7 days a week all month long. The battery should be used occasionally. The recommendation used to be to use it at least one cycle per month without deeply discharging. That could be down to 50% twice or down to 50% once and 25% twice or any combination that added up to roughly 100% usage or more per month.

  • I cannot use battery information when i upgrade kernel

    Today I performed Pacman _Syu. I upgraded my arch linux kernel to 3.0.6-1.
    I rebooted my arch system. After that, my arch system  printed the error.
    "Battery information not supported by your kernel!"
    I try downgrading kernel to 3.0.4-2 and was able to use battery information again.
    What is solution of not available latest kernel in my system?
    My PC is ACER ASPIRE 1410.

    The reason for the error message is probably the ONFIG_ACPI_PROCFS_POWER option, that was removed from the newest kernel. See FS#25845.
    What application is giving you this error? Perhaps there is an update available for it?
    Otherwise you could recompile the kernel yourself with the option set.

  • Battery information is worrying

    i'm new to the forums but i did look at a couple of the older posts. Some people have problems with their batteries and i decided to check mine in the system profiler. I don't exactly know how to interpret it but it says check battery. i don't know if its because of using it a certain number of times or what. any help would be appreciated. I bought it on eBay from a guy who bought it back in May this year (2008) any help would be appreciated. i also made sure that i had the latest battery update (1.3 i believe) and i do.
    Battery Information:
    Model Information:
    Serial Number: Sony-ASMB012-3827-9d2c
    Manufacturer: Sony
    Device name: ASMB012
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0303
    Charge Information:
    Charge remaining (mAh): 2889
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4327
    Health Information:
    Cycle count: 184
    Condition: Check battery
    Battery Installed: Yes
    Amperage (mA): 1521
    Voltage (mV): 12433

    Does the battery charge OK? Do you occasionally calibrate the battery? When fully charged what is reported for "Charge remaining?"
    Normally, Apple guarantees that the battery will retain at least 80% of its original full charge capacity by 300 cycles. Your battery seems to have less than 80% after only 184 cycles suggesting that indeed the battery may be defective. You can call AppleCare or visit your Apple retailer to see if you qualify for a battery replacement.

  • Battery information is not shown

    My Macbook battery information does not show up. Please help ow to count cycle?!

    Hi mongol09: Click on the Apple in the top left corner, then About this Mac > More Info > Power: From here you will be able to see all sorts of info regarding your battery condition.
    Hope this helps
    Stedman

  • Understanding "Battery Information" - Help Please

    Have 17" G4PB, PPC, 1.5GHz, 1.5G Memory, 80G HD, OSX 10.5.8. Here is my "Battery Information"
    Charge Information:
    Charge remaining (mAh): 2816
    Charging: No
    Full charge capacity (mAh): 2816
    Health Information:
    Cycle count: 388
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12503
    How the heck did I get 388 cycle counts?! And does the 2816 for both "remaining" and "full charge capacity" mean I'm out of juice? This battery is about 1-1/2 years old. Any assistance appreciated.

    Happy thanksgiving!
    The concept of "cycles" is covered in this Apple tech article:
    http://www.apple.com/batteries/
    The bit about "charge remaining" and "full charge capacity" can be understood in the context of a metal drinking cup (fill with your favorite virtual libation, of course):
    When new, the cup hold 12 ounces. Therefore its charge remaining and full charge capacity are roughly the same--12 ounces. If you drink four ounces, the "charge remaining" is 8 oz but the full capacity is still 12.
    Let's say that, after the can is used and bumped around for a few months, it picks up a big dent that intrudes into the interior, reducing how much beer liquid it can hold by two ounces. The "full charge capacity" is now down to 10 ounces or 83 percent of its original capacity. When people talk about battery "health," it's this. Health is current full charge capacity divided by a baseline number, about 5400 for the 17" PowerBook. Your health is therefore 52 percent.
    "Percent charge" in the power icon is how much the present capacity (not original) is currently used. In the bent cup example. even though use reduced the capacity to ten ounces, you can put 10 ounces in it. It's 100 percent full in its present, reduced-volume condition.
    System profiler does not calculate "health" for you and does not give the baseline value. There are a couple of freeware utilities that read the machine type and use the correct baseline to show health as a percentage of the original capacity:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    http://coconut-flavour.com/coconutbattery/index.html
    If I've substituted mud for understanding, please post back and I'll try again.

  • Hp pavilion showing wrong battery information

    hp pavilion showing wrong battery information, also not giving warning message when battery low. Sometiimes its showing right information. What should i do to solve this problems?

    Hi @ajmalmji ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that your battery power is not showing correctly and does not provide warnings.
    Here is a link to Test and Calibrate battery.  As you did not provide your Operating System you will need to select the correct one from the list.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HT5137 My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.

    My Ipad's screen is not react my touch commands, while in the screen the time and battery information is shown and working.
    It is not even swiched off. the button in the right above side caanot do it. Could you please, help me as soon as possible.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • MacBook Pro (2007) weird battery information

    Hi everyone! Really hoping that someone can help me. I have been unable to use my MacBook without the charger for almost 2 years now but never have done anything about it until now. It's disturbing not to be able to use the MacBook without the charger, but if it's not connected, the computer shuts off in one second into some sort of sleeping modus. You can't wake it up until you put the charger back on. I looked up the information about my batteri and I assume that something is wrong. The full capacity of a batteri like this should be around 5000-6000 mAh, as I understood, I have 259! Wow! And it says that I only charged the battery 27 times since I got the MacBook in 2007 ... hmmm ... I tried to download the Battery 1.3 programme but all my computer says is that I don't need any update although I'm pretty sure that I don't even have the programme. Is there anyone who can tell me what the problem is? The computer says that the battery is charging, but it doesn't work without the charger put in. And isn't 259 mAh full capacity a little low? Please, someone?
    Message was edited by: gos2404
    Message was edited by: gos2404

    Thanks for your quick reply!
    Well ... Seems that you're right, a new battery needs to be bought Just wondering how it could become that bad in only a year ... well, again, it's like you said, maybe it has been broken all along ...
    Thanks for your help!

  • Voltage in Battery Information Screen

    I've been looking around the web trying to find out why my battery has suddenly decided it doesnt want to charge and one of the things I have noticed is that the voltage (mV) my battery screen information screen shows is a lot lower than all the other images i've seen - mine is 8000 odd and all pictures show 12000 odd.
    Could this be a reason why my battery is not charging and why is my voltage soo much lower?

    actually i have a slighlty different problem.
    it says that is in but it doesnt power it.
    I also tried to reset smc and all other things and nothings helps
    when i put battery in my macbook somethimes i have a really fade green light and then it turn just green and and not orange while i have 0 battery power
    and when i check battery in my toolbar it just says battery is not charging who can help.
    is this just a software malfunctioning and is a update required or is my battery broken?

Maybe you are looking for

  • Simple Tap tile to open a folder?

    I would like to add a Simple Tap tile that opens a folder.  If I choose "Open a File" it won't let me pick a folder.  I can't type in the program box to add the command line switches to tell explorer.exe what folder to open. Suggestions? -Michele Sol

  • Please help - how to copy DVD to computer so that it will play on computer

    I apologize if this is the wrong forum, but I am stuck. I have a DVD of my son-in-law's memorial service that I need to copy onto my computer in a playable form. The DVD itself works great on both the TV, and on the computer (playing with iDVD on the

  • Adobe BrowserLab missing IE6

    Just last week I use to have IE6 as a browser listed in Adobe BrowserLab. Now it is missing IE6. In Adobe BrowserLab > All Browsers it no longer lists IE6. It starts with IE7 How to get it back? David From Adobe BrowserLab help Change the default Bro

  • How to reduce Costing

    I have following query but the query takes too high costing, how should i reduce the cost. TRANCHE_BALANCE table having partition. query is SELECT /* + NO_USE_HASH(tbb) index(tbb XIE3TRANCHE_BALANCE) index (tbb XIE4TRANCHE_BALANCE) */ tbb.project_id,

  • How to get the vaue of HTML Id attribute.

    Hi Friends, Is it possible to fetch the value of an Id attribute of the HTML using jsp.Say, here I am pasting a code for populating the dropdown and each option is assigned an id like this //Populating the drop down with details // id will have the i