Battery is not charging what to do?
it is charging but it says battery is not charging. how much would it be to take it to repair and also how much is a battery? can i just replace it myself?
Try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple to service battery.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Similar Messages
-
Apple icon, sad face, and low battery symbol (not charging) what's going on
my iPod U2 4th gen started acting up on me. it needed to be reset more and more often, until it decided to just stop working all together. it would show me the apple sign, sad face, and low battery symbols. bought and installed new battery, won't charge. it changes from apple icon to sad face back and forth on it's on when plugged into wall with firewire. goes from apple icon to sad face when connected to pc via USB. pc won't recognize it. please help! i've tried everything! is there something wrong with my hard drive? i'll pay anything to save the files on my hard drive. HELP!!!!!
Hey man...I have the EXACT same Ipod with the EXACT same problem. I went to the apple store and they told me I had to wait 3 days to make an appointment with a "Mac Genius" to look at it and that with all the repairs done it would probably cost me $150. Frustrated, I went home and did some research and heres what I found:
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://notpopular.com/blogs/josh/2006/03/29/fix-your-ipod-by-spanking-it/
I kid you not. So basically I put the wall charger on, let it charge for 3 hours. Took it off the wall plug and then slapped the $#!t out of it 4 or five times. Then turned it on. Same sad face. Tried a combination of the reboot procedure and slapping around and now it works! Good luck and hope it works for you too!
I feel like going to the apple store and slapping the crap out of "Mac Rip Ppl off Genius" -
Its been one month, my iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Please help me.
You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup -
Plugged in my iPad Mini into my computer and it would say next to the battery Bar "Not Charging" , and I'm wondering what this means. Thank you!
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?
battery is not charged after using all of my battery.
Of course it isn't — you've just drained it. Plug your AC adapter in and charge it up again. -
Hello Everyone,
This is my first time using the forum. My macbook battery will not charge. I have tried unplugging and doing an SMC reset but it did not seem to change. I have yet to try another magsafe charger. The charger has a dim green light while plugged into the computer. What should my next steps be, besides trying a new charger as well as being the most cost effective?
Thanks
-TBHi ..
The battery may need replacing.
Check the battery maximum cycle count > Mac notebooks: Determining battery cycle count
And check the adapter > Apple Portables: Troubleshooting MagSafe adapters -
TA44551 ipod battery is not charged from the beginning, what i must do now
ipod battery is not charged from the beginning, what i must do now
What do you mean by your iPod is not charged from the beginning? What have you done so far in terms of troubleshooting the issue? Tried a different cable or USB port or wall adapter? How old is the iPod?
B-rock -
hi. my ipad battery is not charging well. max at around 20%. what do i need to do to get it working again?
You may need to recalibrate the battery. See link below.
Are you using the wall charger?
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Seeking help on followings:-
Battery showing "Not Charging" while connected to charger. Macbook working only when charger is connected but "not charging" the battery. Following is the status of battery. Please suggest what to do?
Battery Information:
Model Information:
Serial Number: W0038U4FEE1LA
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 000a
Cell Revision: 0165
Charge Information:
Charge remaining (mAh): 90
Fully charged: No
Charging: No
Full charge capacity (mAh): 4471
Health Information:
Cycle count: 260
Condition: Normal
Battery Installed: Yes
Amperage (mA): -2
Voltage (mV): 11031
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: NoHi sanjoyapple,
Welcome to the Apple Support Communities!
I understand that it can be concerning when your battery is not functioning as you would expect. There are several steps that I would recommend in this situation to troubleshoot. Troubleshooting the MagSafe adaptor and possibly resetting the SMC would be two of these steps. Please read over the attached article for instructions and more information on troubleshooting batteries.
Mac notebooks: All about batteries
Cheers,
Joe -
Ipod will not charge, what do I do :(
I dropped my ipod in the snow, there was a little water in the charge port, but it would still charge, but it wouldn't charge on my ipod dock (it would before) and then my battery got low so I went to charge it and it would not charge, what should I do? it is also jailbroken
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. This is likely the problem
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
MBA battery does not charge when connected. Help!
My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.
It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!
-
I use an HP Pavillion G with an AMD processor. At a certain point, my battery stopped charging. I had previoulsy upgraded the computer to Windows 8. While still using the Windows 8 OS, the battery issue emerged. The taskbar said the batter is plugged in but not charging. I read some forums and took some advice to reset the battery and to release its charge. No luck. I also read that a BIOS update from HP could help this issue.My computer wouldn't boot after the BIOS update. I was able to use the recovery system to return the computer to its original Windows 7 settings (silver lining). I thought this could potentially solve the problem. No dice. I tried the same solutions that I used originally - still no luck. Now, the taskbar displays the same graphic indicating that the battery is not charging, but when I move my mouse over it, it reads "plugged in and charging." The battery is not charging, however.
Thank you.Thanks for your continued help.
Indeed, the battery is closer to a year and a half old. Nonetheless, I haven't experienced something like this with other products, which is what leads me to think there may be a computer-related issue - that, coupled with the connection with Windows 8/8.1. I could very well need a new battery; I am just trying to exhaust options prior to making that purchase and I appreciate your help walking me through these stages.
I did have the HP utility center installed on my computer. It needed an upgrade, so I took care of that. The assistant claims that the battery is charged 100% - this is not confirmed if I unplug the AC adapter. When I ran the battery check, it gives me this message: -
Battery does not charge all the way . How do I fix this?
My battery will not charge overnight. I've had it to the Apple Store and they worked on it for a couple of hours, backing up data and then resetting the iPad. This seemed to help for a couple of days, but then it started doing the same thing. It's still under the extended warranty, but when I call in, tech support tells me that they can see that the battery is fine. How do I fix this?
Hello karen1944,
I think in this situation based off the previous troubleshooting that we need to start isolating the issue to either hardware or software. What I recommend doing is restoring the iPad as a new device, and NOT restoring your backed up data to it for a while. This article named iOS: How to back up your data and set up as a new device found here http://support.apple.com/kb/HT4137 shows how to do that. Start at step 2, and make a current backup of your device to iTunes.
2. Back up
Back up your device before you erase it. Review the steps below, depending on your backup method, to ensure that you have a recent backup in case you decide to restore your device from a backup
iTunes
iTunes backs up your device automatically when you sync. If you have previous backups of your device in iTunes when you select Set Up As New, a sync occurs. This sync creates a new backup indicating the time the device was backed up.
To back up your device:
In iTunes, check Preferences > Devices to check the date and time of your latest backup.
If you do not have a recent backup, create one by right-clicking the device in the source list and choosing Back Up.
For more information on backing up your device, see iOS: How to back up. If you wish to copy your backup to another folder, disk, or location for safekeeping, see this article in the section titled "Where iTunes backups are stored on your computer." For more information about what iTunes backs up, see this article.
That way you can monitor the device and see if the issue re appears or not. If it does not re appear within a few days, then you should restore your data from the iTunes backup using that same article, at the bottom there is a section about restoring from an iTunes backup:
To restore your device using a previous backup
iTunes
To restore your device using a previous backup, connect your device to iTunes. When your device appears in the source list, right-click your device and click "Restore from backup…". iTunes will ask you to choose the desired backup from the list provided.
All the best,
Sterling -
Macbook Pro battery is not charging but the battery meter is full
Hi guys!
I have a 19 months macbook pro. I've tried using 2 different AC adapter but my mac's battery is still at 0% and the status says "Battery is not charging". I think my battery is dead but the LED battery indicator on my battery shows 5 lights, means its at full power.
I've tried to disconnect the AC cable and remove the battery, then press the power button for 10 sec but nothing change when i start my mac again...i also tried to reset my PRAM ( i think ) by holding a cmdopt+PR while rebooting but it didn't help to solve the problem too. I also have the battery update 1.2 installed on my mac and the results is still the same.
This is my battery info from system profiler. I hope someone can tell me what to do before I visit the Apple store.
Battery Information:
Model Information:
Serial Number: SMP-ASMB014-3658-b12
Manufacturer: SMP
Device name: ASMB014
Pack Lot Code: 0001
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0202
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 0
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 0
Health Information:
Cycle count: 298
Condition: Check battery
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12528
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: NoHello,
I am having some strange battery behavior. I bought a FastMac TruePower Battery that is supposed to have extended capacity. Now when the battery dies, i plug in my MagSafe to charge it and it immediately says 'not charging', but then begins to charge. It either continues to charge and gets stuck at 80% or so and reads "calculating" in the menu bar, or just jumps between 'charging' and 'not charging'. The symptoms are very strange, and FastMac already sent this battery back saying it passes all of their tests. I do not want to send it back again because they charged me to send it back to myself even though it still does not work as advertised. I have my original Macbook Pro Apple battery which still charges fine, so i assume it is a problem with the battery based on a simple process of elimination.
Battery Information:
Model Information:
Serial Number: BIT-ASMB012-***-* <Edited by Moderator>
Manufacturer: BIT
Device name: ASMB012
Pack Lot Code: 012d
PCB Lot Code: 050d
Firmware Version: 647e
Hardware Revision: 2700
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 2116
Fully charged: No
Charging: No
Full charge capacity (mAh): 5029
Health Information:
Cycle count: 24
Condition: Good
Battery Installed: Yes
Amperage (mA): 2628
Voltage (mV): 11962 -
SMC Reset and Macbook Pro Battery still not charging
Hi, I bought a new Macbook Pro the Christmas before last (2 years ago) and unfortunately didn't remember to buy the AppleCare. (Didn't have the money to purchase it as I was buying the computer) Anyway, today my charger decided to stop recharging the battery. The battery icon says the battery is charging but the LED light on the charger is not on at all and when I click on the battery status it says "Battery is Not Charging." I've already tried the usual troubleshooting and Resetting the SMC but it didn't work. I also checked the status on the battery and my computer said it was Normal. What else can I do? I really need this laptop for college and the battery has to be usable.
If available, try a different charger.
What does System Report>Power say under AC CHARGER INFORMATION?
Ciao.
Maybe you are looking for
-
Passing Select-options in OO ABAP
Hi, How to use select-options in oo ABAP? Regards, Ravi S
-
Windows XP resolution issue on 27" iMac
I've got windows XP installed on my 27" iMac through bootcamp but it's all stretched out. I'm assuming this is because of the high resolution of the 27" iMac and no matter what resolution i choose the screen looks all stretched out. Anyone know a fix
-
I can't make a connection from JDeveloper 10g (9.0.5.0.0) to WebLogic 8.1 When I click "Test connection" JDeveloper 10g writes the following: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory Have somebody ever established a connection
-
Hi Guru's I installed CE 7.1 Trial version but when I try to check the installation I could not see the CE1 under SAP System in the SAP Management Console. I follow the steps but the CE1 do not work.( I can not see) 1. find shortcut fo
-
Color checker passport vs Macbeth color checker
I recently purchased the x-ritecolorchecker passport. In the past after i finished shooting my projects, I would shoot few shoots in different f-stops with the Macbeth color checker, and later i would pen the Macbeth shots from the Camera Raw, and i