Battery issue after upgrading to iOS 6 on iTouch 4G

I did and upgrade of my iTouch 4G to new released iOS 6 and i discovered that the battery draining very fast even in stand-by mode, it takes couple of hours for battery to drain its energy to zero, i did a restore of my iPod using iTunes and pointed iPod as new device, but it has no effect still, i tryed to downgrade to previous iOS 5.1.1 and failed to do that, i am still wondering why new iOS draining my batter that fast? Befor that my iPod worked for days in stand-by in couple in listening music for 1 or 2 hours per day, but now is really a disaster, any ideas?
Thanks
Message was edited by: Apelsincheg

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon.  The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight.  Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A."  The symbol between volts and amps is the symbol for DC.  Do NOT use an iPhone charger.  Do NOT use an iPod charger.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter..
I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.
I'm not saying that you don't have a problem.  However, I am saying that we don't know.

Similar Messages

  • Freeze/Battery issues after upgrade to iOS 8.0.2

    Since upgrading my 3rd Gen iPad WiFi to iOS 8.0.2 I have been experiencing freezes where nothing works. I can't open apps or do anything. If I hold the on/off button down eventually it comes back to life.  Second issue is battery life.  Last night I closed my smart cover and made sure the display was off.  Battery at the time was 62%. This morning I opened the iPad smart cover and the battery was down too 23%.  This has happened a number of time over the past week or so. I have Blue Tooth and Location Services off.
    Both of these issues are new after upgrading to iOS 8.0.2.  No problems whatsoever prior to that.
    Not sure if I'm putting this in the correct category or not.
    Is there a way to wipe the iPad clean and reinstall everything from scratch or is my iPad just shot?  Thanks in advance.

    Same sort of issues here on my ipad3. iOS 8 turned it from a nice slick device into a jerky, laggy pain. Tried all the reset options and it's still pretty crap.
    NIce one apple, I'm changing to a galaxy tab after you broke my iPad!

  • HT4623 iPhone 4 (2011) very sluggish and battery issues after upgrading to iOS 7

    Hi,
    I am experiencing crazy sluggishness in my GSM iPhone 4 (2011 model) after recently upgradig to iOS 7.0.2 from 6.1.3. Phone's freezing every few seconds and when it does, you can't do any activitiy, keyboard will not respond, videos will freeze etc.
    Top of it, the battery is drying up like nuts. It used to work for more than 24 hrs with same settings earlier, now hardly 7-8 hrs !!! ..... I turned off everything like background-app refresh, wireless, 3G, bunch of other things, infact not even keeping any apps running in background while not using, I immediately kill it as soon as I am done using it.
    Am very badly stuck, biggest mistake of my life that I ugpraded to iOS 7
    - Is anyone experiencing similar issues ?
    - Is there any way I can go back to previous version ... is Apple still signing iOS 6.1.3 ? I don't have shsh blob backup of previous version.
    Any thought is greatly appreciated.
    Thanks in advance,
    Rajiv

    rajivrp wrote:
    Hi,
    ..Phone's freezing every few seconds .
    Any thought is greatly appreciated.
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also try a Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    rajivrp wrote:
    - Is there any way I can go back to previous version ...
    Apple does Not Support Downgrading... Never has.

  • Battery issue after upgrade to iOS 5 on 3GS

    After the upgrade battery level goes from 100% to 0% in 5hrs basically in standby.  I have turned off push services, data connections, icloud...everything.  iPhone still drains battery and gets quite hot.  Any suggestions?

    Same here - mine went down to 0 in 8 hours - not good news

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • IPhone 4s issues after upgrading to IOS 8

    Have few issues after upgrading to iOS 8
    - Phone hangs every few hours, reboots automatically
    - Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
    - Searching for contacts is a problem
    - Apps hang (especially facebook)
    Any way to go back to iOS 7 ?
    Any other tips / tricks appreciated..
    Venkat

    No way to come back to iOS 7 ...
    But did you tried to reset all settings (general -> reset -> all settings) ?
    For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

  • Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Not sure, but try this:
    Let the battery drain to below 20% (I went to about 14%).
    Plug your phone in and leave it to charge COMPLETELY. This took my phone somewhere around 4 hours to complete.
    When you're done, you may have better luck keeping a charge.
    iOS 5 adds a lot of additional communication, and every time you connect wirelessly to anything, more power is used. Even so, some people report that a battery cycle like this helps. It seems to have worked for me.

  • I notice a lot of you started having battery issues after updating to iOS 6....

    I'm not saying this could be the reason but I'm about 98% sure it has something to do with it. I have an iPhone 4S and when I first got it, I remember the display was very very bright... i would set it on low and it was still pretty bright. Battery consumption was horrible, I could literally sit there stare at the screen and see the battery percentage drop. Then when some kind of update was released about a month later iOS 4.XX something along the lines... that suppose to fix the issue. I updated my phone and it was fixed. However, it was fixed because my phone got more dimmed.. i could max out the brightness and it was still no where near the brightness of before. And this cause my battery life to be better. However after I updated to iOS 6 the brightness came back, and my battery is rapidly decreasing like it did before. So i'm guessing this had something to do with the battery issues. I'm hope this will help you all. to make your battery last longer, dim your phone, better for your eyes too

    I, on the other hand, had no brightness issues on the 4S after upgrading to iOS 6, and no change in (good) battery life.  If could be something else, an app or background process that is less efficient with iOS 6?  Could be anything.

  • WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

    Hi,
    WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
    My iPhone is fine after the upgrade though.
    Clearly an iOS8 software issuse on iPads?
    Thanks

    Similar thing happened to me..  Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
         Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose  of an iPhone..
    Keeping my fingres crossed till then!

  • Battery Issues After Upgrade

    I have noticed that after iOS4. Battery life is horrible on my phone it doesn't even last half day before it dies completely.
    I turned off gps, bluetooth . What else can I do to get a decent battery life.

    After upgrading to 4.01, I notice that when I plug my phone in it gets really hot and the charge jumps really quickly and within a short time the phone thinks is fully charged. This is probably what's causing your short battery life. What I do is either let the phone go until it turns itself off (battery dies completely), or as soon as I plug it in I restart the phone and it seems to correct itself. I hope that Apple fixes this problem with the next update!!!

  • Sync issues after upgrading to ios 7

    After upgrading to iOS 7 on my iPad 3 with no problem at all, I lost all my music. When I try and sync with iTunes 11.1 (on Windows 7) it hangs on the last step "waiting to apply changes", and the little sync icon on the iPad disappears. I can't even add or remove apps. Any solutions out there?
    Thanks in advance.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Cisco 7200 VSA issue after upgrade to IOS 15.2

    After upgrade to IOS 15.2(4), VSA module in 7206VXR (NPE-G2) is disabled and we cannot enable it.
    Show diag output:
    ------------------ show diag ------------------
    Slot 0:
    VSA IPsec Card Port adapter
    Port adapter is deactivated
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    PCB Serial Number        : JAF1309ADDT
    Hardware Revision        : 1.0
    Part Number              : 73-10220-05
    Board Revision           : B1
    RMA Test History         : 00
    RMA Number               : 0-0-0-0
    RMA History              : 00
    Deviation Number         : 0
    Product (FRU) Number     : C7200-VSA          
    Version Identifier       : V01
    Top Assy. Part Number    : 68-2578-05
    CLEI Code                : CNUCAFNAAA
    EEPROM format version 4
    EEPROM contents (hex):
      0x00: 04 FF C1 8B 4A 41 46 31 33 30 39 41 44 44 54 40
      0x10: 05 0D 41 01 00 82 49 27 EC 05 42 42 31 03 00 81
      0x20: 00 00 00 00 04 00 88 00 00 00 00 CB 94 43 37 32
      0x30: 30 30 2D 56 53 41 20 20 20 20 20 20 20 20 20 20
      0x40: 20 89 56 30 31 20 D9 03 C1 40 CB 87 44 0A 12 05
      0x50: C6 8A 43 4E 55 43 41 46 4E 41 41 41 FF FF FF FF
      0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
      0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    If we try to enable it manually from CLI we get the following message:
    Router(config)#crypto engine slot 0
    VSA will NOT come up until system power-cycle or reload
    Of course, after reload nothing happens.
    Is VSA incompatible with IOS 15.x? I'm asking because downgrade to 12.4 causes VSA to be active again.
    Regards,
    Igor

    Hi igor,
    1) FDP image
    Field-programmable devices (FPDs) are hardware devices implemented on router cards that support separate software upgrades. An FPD image package is used to upgrade FPD images
    The FPD image package must be compatible with the Cisco IOS software that is running on the router. If an incompatibility exists between an FPD image package and the Cisco IOS software release running the router, the device with the FPD will not operate properly until the incompatibility is resolved.
    The FPD automatic upgrade feature searches only for the FPD image package file that is the same version number as the Cisco IOS release being used by the system. For example, if the Cisco IOS release being used is Cisco IOS Release 12.4(5)T1, the system searches for the FPD image package file that supports the specific Cisco IOS release (c7200-fpd-pkg.124-5.T1.pkg).
    2) Steps to Upgrade:
    From the document below which I already sent you, please refer to the section “How to Upgrade Field-Programmable Devices”
    http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html
    I would recommend you to follow the steps in the “Field-Programmable Device Quick Upgrade (Automatic FPD Upgrade Only)” as that is the recommended and the easiest way.
    Steps are:
    The command is present “upgrade fpd auto” in the running-config by default.
    Have the Cisco IOS image in disk2:
    Download the FPD image package to disk2: flash disk
    Reboot the router using the new Cisco IOS release.
    Hope this helps
    Thanks
    Syed

  • Any iPhone 4S users experienced better battery life after upgrading to iOS 7.1?

    Hello
    I am curious to know if any iPhone 4S users experienced better battery life compared to iOS 7.x.x.? That will be great to know before I upgrade and give up my JB .
    Thanks!

    diesel vdub wrote: With every iOS update there is an extremely small minority of users (less than 1%) that seem to experience problems and cannot phathom that the issue is not affecting millions and is not widespread.  Apparently when the issue affects you personally it's impossible to accept that millions and millions of users are not experiencing the same problems or accept that the issue is with your device specifically.
    Really, that's quite an assertion. I'm sure you can prove those stats; but  my apologies,  I forgot that Apple produces flawless product.
    I can only report MY SYMPTOMS: iPhone 4S 32M on VZW, upgrade to iOS 7.0 at the end of February (when security flaw was announced), after which my battery life is about 1/2 what it used to be before the upgrade.
    Also, as reported above, when I upgraded to iOS 7.0 my phone would lock (in phone mode); had uncommanded  reboots; and severely degraded battery life.  Two days ago, upgraded to iOS 7.1.  Most screen "touch" issues appear resolved; and uncommanded reboots resolved.
    Battery life / duration still poor; still charging every 4-5 hours.
    Previously with  normal use (with no location services) could run a full day, about 8 hours before recharge. Now, same situations, I'm having to recharge after 4-5 hours.  Again, no new apps, all apps are current; no different usage.
    What's the resolving fix?

  • IPhone 4s heats up and drains battery quickly after upgrading to iOS 8.1.2

    Last Sunday i.e. on 14-Dec-2014 i upgraded my iPhone 4S (WiFI + 3G, 64GB) to iOS 8.1.2. Since then my iPhone's battery has started to drain out abnormally fast (it doesn't even last an hour after charging it fully to 100%) and the phone even heats up simultaneously.When checked under Settings> Usage> Battery Usage, i found the app-wise usage of battery like this: Phone (Audio) 36%, WhatsApp-24%, Home & Lock Scree-17%, Settings-7%, Messages-5%, Mail-4%, TOI-2%, Conatact-2%, and rest few apps 1% each. Prior to upgrading the iOS to 8.1.2, the battery life of my iPhone was normal: i just had to recharge once in 24 hours with normal usage of the phone. Could anybody help me to fix the problem? Thanks in advance. -BBS Ijam, GTK/SKM/171214

    I think iPhone 4s is oLd now we need to update our as I will have to change my battery from repair center maybe this will solve the problem the new iOS are heavy for our phones.
    *** I also have extra internal battery cover for my iPhone. I can't go out without that cover because my iPhone battery drain so fast from 100% it will be maybe 60 % so fast that is so annoying.
    Long story short my iPhone is screwed up I think I don't trust my iPhone battery anymore.

  • Yahoo mail sync issue after upgrade to iOS 5

    After i have upgraded to iOS 5 my emails from Yahoo are a month off.
    Only the emails from a month before are synchronized. As an example, today 10/24 I can see the emails from until 9/13.
    Any ideas on how to fix this?

    Ok, thanks everyone's experience sharing with each other. after I try so many time with my bro for this issue, finally we got solution to solve this issue.
    I'm using iPhone 4 and my bro is using iPod touch 4th Generation, we both upgrade to iOS 5,
    then I was thinking that when I do Facetime setting, there is a selection that you can use your Apple ID as your Facetime account, so I changed my Facetime account with Apple ID, the default setting is using your phone number. then its works!!  now I can use Facetime with my bro in airplane mode.
    I guess before I upgrade iOS 5, iOS 4 allow Facetime auto detect to use phone number(if airplane mode is off) or use Apple ID, which your email address to connect to another user, but iOS 5 not allow it or disable auto detect, (I just guess). 
    anyway now I only use Apple ID as my Facetime account, then I can use Facetime under airplane mode. hope it help you guys.

Maybe you are looking for

  • HP Photosmart 6520 Server Connection Error: -1: Apps don't work and Scan to email doesn't work

    My HP PhotoSmart 6520 has a persistent error to connect to the server and therefore Apps and Scan to email doesn't work. I have manually set DNS to 8.8.8.8 / 8.8.4.4, I have installed latest driver on my Macbook pro, I have updated firmware, but stil

  • Converting INVOIC02 idoc to EDIFACT INVOIC message (Using Adapter Module

    Hi Friends, We are sending customer idoc (INVOIC02) from R/3 to external system through PI. We want to generate EDIFACT output file (message type : INVOIC). Is it possible to convert IDoc message to EDI file format through java adapter module ? Will

  • Search for a word

    I have a sentence... and a word array.. sentence[0] = "The Sun is the star at the center of the Solar System" words_array[] = { "center"}; i am searching the sentence for the word center.... if it founds return that word "center"... I attahced sample

  • Material Master --View's wise mail sending for further process

    Hi all workflow guru's, I am trying to implement workflow for material master creation 'WFMaterialtest'. the business requirement is that for certain material types when Basic Data1 and Basic Data2 views have been created by USER1, a work-item needs

  • Why is wake computer from bluetooth greyed out?

    I am using an Apple wireless keyboard and mouse with the latest firmware upgrade and system 10.4.5. My "wake up computer from bluetooth devise" option is grayed out in my system preferences. Any idea how to fix this?