Battery light flashes when charging

is the battery light supposed to flash when charging?
i thought i saw somewhere that meant a bad[dead] battery?
Thanks!!

There is an article on Laptop Battery Life at:
http://guides.macrumors.com/LaptopBatteryGuide
1 Facts about your battery
2 How long will your battery last?
2.1 What is "full cycle"?
2.2 Power table
2.3 What this means
2.3.1 Example
2.4 What does 80% mean?
2.4.1 Example
2.5 300 Cycles
3 How can I see my battery's age and condition?
3.1 Coconut Battery
3.2 iStat Pro
4 Battery Calibration
4.1 Intel notebooks

Similar Messages

  • Satellite A500 - Battery light flashes when connected to mains power

    Win 7 Satellite A500 PSAM3A-03P00E.
    The battery light flashes when connected to mains power (intermittent fault), when I unplug mains and re-connect flashing stops and battery (high capacity) continues to charge.
    Also when battery light flashes the key board back lighting stays on when it should blank out and if the back lighting is off and the battery light starts flashing the key board back lighting doesn't turn on, all other functions seem to work fine.
    The battery charges and holds charge as it should (when light flashes battery doesn't charge).

    Hi
    Did you notice this issue from first day of purchase?
    Theoretically it could be possible that your battery starts to malfunction
    At the other hand an electronic issue might be possible too
    However, try this:
    Remove ac adaptor and battery. Then press and hold power buttons 30 sec long.
    Then insert the battery and connect AC adaptor again does it helps?
    By the way: is BIOS up to date? If not, perform an update.

  • Battery light flashes when connected to mains, (intermittent fault) battery in good condition.

    Win 7 Satellite A500 PSAM3A-03P00E. The battery light flashes when connected to mains power (intermittent fault), when I unplug mains and re-connect flashing stops and battery (high capacity) continues to charge. Also when battery light flashes the key board back lighting stays on when it should blank out and if the back lighting is off and the battery light starts flashing the key board back lighting doesn't turn on, all other functions seem to work fine. The battery charges and holds charge as it should (when light flashes battery doesn't charge).
    Solved!
    Go to Solution.

    All fixed, the earth contact in the power jack was bent down allowing intermittent contact and limiting current. I bent the contact back up to where it should be and all is good.

  • Battery light flashing when AC is connected

    Has anyone experienced this?  It seems that there is a bad connection with the AC Adapter but I'd rather not send it in if I can help it. I have replaced the hard drive so I'm rather fearful of being stuck
    I dont think an SSD could effect this as i've had the drive in for almost 3 months with nothing but great performance. What do you all think?
    Solved!
    Go to Solution.

    It is actually both the "mains power" and (with some delay) the "battery" icons flickering (the latter sometimes turning red even though it should be blue as per the full charge status. This seems to be due to the plug of the AC-200 power supply /charger shipped with type RX-72 Booklet 3Gs which is NOT making proper contact, being longer than the socket's depth and having all-too-literal radial "wiggle room" (as if of insufficient diameter) at least on the units of several reviewers at http://hukd.mydealz.de/deals/ebay-wow-nokia-booklet-3g-349-euro-versandkostenfrei/8751#un96854 - moreover I have heard one of these netbooks (not just the PSU itself) make a high-pitch hissing sound (as from switching PSU or LED backlight transformer coils) only while the mains charger is plugged into the Booklet 3G. In fact it needs to be firmly plugged in to make contact at all, but it just does not fit tightly into its wider than expected socket - actually whatever little vibrations are caused probably by the slow hard disk suffice to disconnect the plug and drain the battery after a few hours unattended in an empty room. I do very much hope that this is just a problem of the charger rather than an engineering defect in the Booklet itself, and that Nokia will indeed take the opportunity to offer me another one with a better plug to try.

  • NX6325 won't power up - battery light flashes 8 times

    I have a 3 year old NX6325 that won't power up any more.
    It makes no difference whether the charger is plugged in or not.
    When I turn it on the battery light flashes 8 times (amber) and that's it. Nothing else happens.
    Does anybody know what this means?
    Regards,
    Julian.

    It is very likely your Northbridge chipset is gone.
    The CPU could not make connection to the Northbridge to initiate the any data transfer from the Southbridge ( connected to all your low level devices such as Hard Drive, USB ports, Optical Driver and etc ) to fetch the BIOS content to start the POST ( Power On Self Test ) sequence.
    It could also mean your CPU could be bad.

  • Satellite U305 No power, battery light flashes

    My U305 no longer powers up. Whether battery plugged in or not, battery light flashes and nothing else happens.
    Michael

    Hallo Michael
    There must be some serious issue with power supply electronic. If there is serious problem with power supply the notebook sends hexadecimal code and this code can help technicians to identify the problem.
    I am afraid there is nothing you can do about it so please contact nearest authorized service provider and ask for help.

  • T61 Battery light flashes red and green

    Hello:
    My T61(type 8891) won't start. I'm getting a series of flashes from the battery and power lights:
    A/C power connected: power light flashes green alternately and battery light flashes green then red/green.
    AC off, battery installed: power light flashes green at the same time as the battery light flashes red/green.
    This happened twice before in the past 2 weeks. After about an hour, it booted up - no problem. This time, nothing.
    Thanks in advance for any assistance.

    It started about one month ago - no known cause. The problem happened 3 times since then but each time it booted up by itself  after a half hour or so. A new motherboard is going to set me back plenty but f it's needed, I guess I must get it repaired. I'm quite handy at taking the laptop apart. I've replaced the hinge, and bezel.
    Maybe the fan is inoperable which may cause it to not boot up. Lately, I've been feeling exhaust air much warmer than before even if it's not being used. I blew the dust off it 3 weeks ago.

  • Satellite L300 - Nothing if I try to start it up, only battery light flash

    Hi i have a L300 and today it turned off and when I tried to start it up again nothing would happen other then the battery light would flash.
    can any body help me please im not that good with computers.

    Hi Alby,
    I have founded an interesting thread here in forum:
    [Which steps should be followed if your Toshiba notebook doesn't start?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  • Bulging Battery / excessive heat when charging

    Hello,
    I have a bit of a problem with my blackberry:
    1. Annoying unread messages that won't go away
    2. Excessive Heat when charging
    3. Bulging Battery
    Do you guys thinks that this warrants for a warranty exchange? Or is it ok for me to keep using it?

    With annoying unread messages, you have to deal it with your carrier if its SMS or email provider if its email.
    With bulging battery and excessive heat when charging - please refrain from using your phone while charging OR you may look for the best Blackberry charger (Model: PSMC04A) because the output is 700mA unlike the charger that came with your phone, its only 200-450mA. This is not meant to use while you are charging but because its a pretty fast charger, it doesnt take much time to complete the 100%
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • U510 won't turn on, battery light flashes twice when plugged in then nothing

    My ideapad u510 is dead. It won't turn on and no power. The only indicator i get is sometimes when inserting the power adapter the battery indicator light will flash twice amber then turn off. Is this an error code of some sort or is the adapter shot and just not charging or powering up the computer?

    Hi Citrineaux,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with system not powering on in your Lenovo U510 laptop.
    Try to connect with different adapter and check for the issue. Also connect the external monitor to check if the issue is no power or no display. Check if you are able to hear the windows login sound.
    As this model has the inbuilt battery, please try to power on by reset button or novo button.
    Hope this helps. Do post back if issue persists!
    Best regards,        
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Camera flashes when charged battery is inserted. Won't power up.

    Battery went dead while taking photos. I charged the battery. Upon inserting, the camera flashed (weird) but wouldn't power up. Then, the battery charger showed that the battery needed charging, so I did it again. In a few minutes it appeared to be ready, so I repeated the process with the same result. I thought maybe I ruined the battery, so I bought a new one.
    Same result. I would think it's a software problem, but there's nothing I can do to get this **bleep** thing to light up!
    Any ideas?

    Hi JimE!
    We understand your frustration, and we're here to help!  To have a better understanding of your issue, please let everyone know which model Canon camera you own.  Also, please confirm with us the exact battery model, as some of our cameras have additional battery options.  That way, our Canon Forum members and our Subject Matter Experts will be able to assist you with suggestions appropriate for your model.
    And here's some additional suggestions regarding the battery issue you've described:  do you have an extra battery charger?  If you plug your battery charger into a different outlet, does the same issue occur?
    We hope this helps, and look forward to working with you!

  • Why are input-output lights flashing when not in use? Pirated signal?

    I have my airport base station set up to not make itself public (ie. you must type the name of the network and password for it to appear and let you in). However, I noticed the other morning when I got up (in the dark!) that the lights were flashing like crazy. It really looks like it is in use. Is there anyway to minitor whether or not somebody is stealing signal from me, or is there another explanation?
    Thanks!

    I also can state that it is absolutely normal behavior and nothing to worry about (there is always some network traffic).
    Regarding security, if you really think that could be an issue, you should allow only devices their MAC addresses have been registered to the AirPort to get access.
    This does not take effect to encryption, but prevents unauthorized people (e.g. your neighbor) to share your WLAN network - regardless if they know your password or not.
    Settings are done at the AirPort maintenance software: Select the station, click on "configure", on new window select the tab "Access" and then add the MAC addresses of all devices that are allowed being connected.
    (Note that I use the German version of the AirPort maintenance software, so I'm not sure if I named it correctly).
    MAC addresses are located on all network cards or their packaging, bottom of notebooks (if they have a (W)LAN adapter; remove battery in case you can't find it, sometimes it is hidden there) or somewhere at the back panel of your desktop computer with integrated (W)LAN adapter.
    Just to explain: MAC addresses are unique to each device, they should never appear twice in the World; therefore this is a very safe solution.
    And if you not care much about encryption, you can turn it off completely and profit from faster network access (but this is at your own risk).

  • Screen only lights up when charging.

    What would cause the screen of a BlackBerry to stay dark? When a call is received the screen stays dark. My friend can answer the call with his Bluetooth. The only way to get the phone to light up is to plug it in to the charger. Once he unplugs the phone it goes back to the dark screen. He used the phone yesterday and everything was fine. Is there a setting that might have been pushed while the phone was in his pocket?

    I would check settings/options/screen/keyboard options and check backlight brightness and timout.
    If someone helped you give them kudos. Research all info!

  • Power Light flashes when switching on my Mac mini

    I recently experienced a strange behavior of my Intel Mac mini (Core solo CPU): After switching on the Mac I do not hear the music clip but instead the power light at the front flashes. It is a different kind of flashing than when the Mac mini is in sleep mode. It flashes with a frequency of about one period per second.
    After switching off the Mac mini pressing the power switch at the rear side for about 5 seconds and then switching on the Mac mini again the computer performed a completely normal boot process.
    I assume that the flashing of the power light does have some specific meaning. But I could not find any information about this behavior in the manual.
    Any ideas are welcome!
    Regards
    Adalbert.
    Intel Core solo Mac mini   Mac OS X (10.4.8)  

    I assume that there is a communication problem with
    any of the attached hardware (keyboard, maus,
    display). Are there specific light signals (flash
    sequences) for any of the peripherals not being
    detected?
    No. Logically, if the system doesn't detect a device, it would not know to give a warning that the device wasn't detected. The only indicators the system will give during startup, are the ones listed in the article to which Doug gave the link, and if your mini gives any startup warning which meets the description given in that article, then you have that specific problem with your system. The fact that the system also startup correctly at other times simply means the problem is an intermittent one. Clearly, intermittent or not, it still requires to be fixed.
    Since the mini is new (albeit from the refurb store), if you are not sure what the flashing light actually means, call Apple. The system is under warranty and if faulty, they will fix it. If you have an Apple store in reasonable reach, take the system in and talk the issue over with one of their service people.

  • Why does my battery run out when charging?

    I updated my iPad to iOS 7.0.2 and when ever I use my iPad and it's charging, it will still lose battery life. Is there anyway to fix this?

    Make sure you are using a 10W/12W charger and plug into wall socket.

Maybe you are looking for

  • Custom kernel thoughts?

    so i managed to compile a 2.6.32-rc3 kernel yesterday with the zen patches. i actually spent 2 days compiling over and over again until it worked 100%. the only thing i have a problem with now is the virtual box module, but thats no biggie. but wow,

  • Function module to convert date form yyyy/mm/dd to dd/mm/yyyy format

    Can any one tell me Function module to convert date form yyyy/mm/dd to dd/mm/yyyy format?

  • Call transaction in report

    Hi guys, I have 1 report having all details of sales order like sales order no, item ,material etc.... I want that if i click on any row or suppose second row  then that sales order should open in va03. Modertor Message: Extremely basic question. Ple

  • Finding rotation of degrees of text

    I have found vertical flow of text by using PDWordGetAttrEx(thisWord, 0) & WXE_VERTICAL_FLOW,if(PDWordGetAttrEx(thisWord, 0) & WXE_ROTATED) Please help me to find out the degree of rotation of text in pdf,i want to exact degrees.

  • Sync iPhone Contacts Group to Outlook

    I have a iPhone that was sync with other mailing system. Now I want sync those contact to my companys outlook and it's sync succssfully. But I find that was miss the contact groups information and cannot edit it in the outlook. It's strange that the