Battery Low Error Message

I have Nokia N97 Mini handset and I am facing problem in it with Battery Low error message, when ever I call someone or I receive any call.
Battery works fine in case of standby mode, or even when I do SMS chat for whole day. Even if I listen to music for 10 to 12 hrs, the mobile works fine, no issue of battery low. But during that if I receive any call, then suddenly it displays the battery low error message and the mobile is switched off.
I try to check everything of it. The mobile functions normal and in good condition in following cases -
1. Wife Connectivity
2. Bluetooth data transfer
3. Sms chat for lets say 12 to 14 hrs.
4. Video play for 2 hrs.
5. Music plays for 10 to 12 hrs.
6. Clicking photos or recording Videos.
7. Browsing internet.
But it only falls down in case of Call. Either I receive call or make a call. I don't know how to Rectify this problem. I had once shown to Nokia customer care, but even after that the problem still remains.
I even try factory restore settings and hard format of OS. But still no improvements.
Can anyone help me in this regard? Any information will be useful information to me....
Please help me out, I am facing a lot of troubles with this matter. Looking forward for your suggestions.

Hi all. After searching alot over the internet, and asking friends , colleauges . I conclude that nokia n97mini battery drop is not caused by background running applications or even battery life problem. Its rather a bug in this handset, which suddenly drops out the battery to zero and phone switches off. Even still battery power exists and you can turn on and start messaging or playing music without recharging it from that state.
Nokia should have take care of this problem as alot of other nokia n97mini users are facing same problem. I am one of those who are unable to find solution for this problem. And so I have no other choice other than to sell this set.
Calling is the major functionality for which we buy a phone, and if handset is unable to let us receive call and talk before which it shuts down, so I think such hand set is a **bleep**.

Similar Messages

Reinstalled new cmos battery,not error message,code 0176 and 1271

can anyone help me,i installed a new cmos battery and now the IBM thinkpad T42 is coming up with two error messages,
i've looked at what they are , 1 is for time and the other is a security message saying the system has been tampered with,
it ask's for a password,but there wasn't a password installed, so how do i get over this problem?
can someone please help.

Changing the CMOS battery will trigger the Supervisor password if one was set, and it may have been set by a previous owner years ago...
Having said that, password cracking techniques are NOT allowed to be discussed on this forum...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HP Mini 311 - HP Battery Alert - Primary (Internal) Battery (601) - Error Message at Startup

I have a HP Mini 311-1037NR (Product Number is VBM262UA#ABA). My OS is Windows 7 Home Premium.
When I start up my HP Mini 311 I receive the following message:
HP Battery Alert
The system has detected the storage capacity of the battery stated below to be very low. For optimal performance, this battery may need to be replaced.
Primary (Internal) Battery (601)
ENTER - Continue Startup
Here's are my questions:
First of all, what exactly is the problem here? From what I have googled, it would appear the problem is NOT my external battery, but my internal battery. What battery is needing replacement? Does it have a name?
Second, is there a user guide out there that would assist me with the replacement process that someone can provide a link to or at least send me the page that helps me? Is there a YouTube video (even better)?
Third, what exactly is the part number of the battery that needs replacement and exactly where do I purchase it (How much $$ does it cost)? This question is important as I may be able to find out how to replace the battery, but without a way to purchase the replacement battery I'm still dead in the water.
Fourth, my HP Mini 311 just dies when I unplug it. Will a remedy for the above issue remedy this issue as well? I really do enjoy using my little HP Mini, but would prefer to have the option to use it without a power cord.
Thanks in advance for any and all help.
Tim
This question was solved.
View Solution.

Hi Tim,
No problem and it's certainly wise to verify an answer.
I'd say you posted your question on the correct board. It's usually best just to post once on the relevant board. I do agree that the term 'internal' does cause unnecessary confusion.
Here's a link to your Maintenance & Service Guide.
Yes, I'm certain that the 601 error code refers to your notebooks main battery ( 602 is a failure code for machines that have a secondary storage cell ). Interestingly, there is no error code generated for a failing rtc battery - or any in built diagnostic test for it, just the usual symptom of the system clock re-setting after each shutdown.
There's also a HP document regarding start-up battery alerts on the following link.
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443470#N534
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Battery indicator error message on startup

HP Pavilion p6512uk desktop PC running Windows 7 64-bit
Every time I startup I get the following two messages:
Battery Indicator - HPID09. Access violation at address 00401C62 In module 'BATINDICATOR'.exe Read of address 000002DC
and
Battery Indicator - HPID09. Access violation at address 6D361A3B In module 'HID.DLL Read of address 01709DA8
What does this mean and what is the remedy, please.
This question was solved.
View Solution.

One way to get rid of the issue is to dowload the autoruns utility from Microsoft TechNet's Sysinternals.com. Run the utility and select hide all microsoft instances. Find the batindicator.exe file and disable it.
a video that touches on how to use autoruns. Autoruns is normally used by enthusiasts and experts. I don't know where you are in the user spectrum.
Post your results.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Primary internal battery 601capacity Error message.

My windows7 laptop Pavillon dm4 starts with the Primary internal battery 601capacity is low and may need replacement. How urgent is the battery replacement? The diagnostics shows 1 bad cell.
This question was solved.
View Solution.

Hi,
You need a full product number (dv4 is a series of many products) to enter the following search for the RIGHT part #:
http://partsurfer.hp.com/
You can order from there or use part # to order elsewhere. The following link shows you how to find the product number on your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to fix 'Memory is low' error message on HP LaserJet 3030

I have my LaserJet 3030 connected to a PC that is accessed by other home computers on my LAN...been running without problems for years. The small window on my Laserjet has a statement 'Memory is low'...I press enter with no effect. Can anyone give advise on how to correct this problem?

Hi wbarattino and misterperov,
Please bear with me as I'm not supporting much of business printers but I found a similar article on HP Business Forums.
I also found this article (although it's a Color LJ 2600n printer) from the HP Business Support Center site.
Hope this helps both of you!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

Unauthorized battery Z710 error message

I've owned the computer about a month and have had some automatic updated run on it when starting it. Now I am getting the Unauthorized Battery pop up. It has been discussed in the Yoga forum, but doesn't look solved yet. Is this the result of a new Power Manager version?
I am very unhappy that this is happening having only had the computer for so short a time.

Iended up calling tech support and after going through the standard Tech Support switch flipping, I allowed the tech to get into my computer remotely and check some settings. After all of that she sent me a new battery and I sent the old one back. It seems to be working fine. I have had the battery out of the machine due to my mostly having it stationary and plugged in.
Maybe anyone who has the issue needed to call tech support and complain about it and maybe that will get them to get their stuff together.
Good Luck All.
D

Error message Internal Battery 601. How do I get a replacement? HP G71 Notebook

I have 2 HP G71 Notebooks - with WIN 7; 4:0 GB; 64 Bit and both dispaly the Internal Battery 601 error message. How/where do I get replacement batteries?

Replacement battery is a HP EV06
you can buy it from HP or Amazon, beware of really inexpensive non HP batteries, they do not last.
http://shopping2.hp.com/en_US/home-office/-/products/AC-Adapters-and-Batteries/Laptop-Batteries/KS52...
http://www.amazon.com/HP-462889-761-462889-542-462890-542-462890-761/dp/B006LPMGT6/ref=pd_cp_pc_1

Why don't I get a battery low warning anymore, laptop just turns off?

My laptop is only just over a year old and I no longer get a battery low warning message. My computer just switches off. Have I disabled the warning somehow?
The battery lasts for about an hour and a half which isn't great. This is what System Profiler says about it:
Model Information:
Serial Number: SMP-bq20z951-3a6c-fac
Manufacturer: SMP
Device name: bq20z951
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 002a
Hardware Revision: 000a
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 1427
Fully charged: No
Charging: No
Full charge capacity (mAh): 3751
Health Information:
Cycle count: 339
Condition: Good
Battery Installed: Yes
Amperage (mA): -1921
Voltage (mV): 10690
Any suggestions would be appreciated. Thanks.

You have the removable battery? In that case, you can expect it to have up to 80% of original capacity at 300 cycles. You have 390 cycles, and it's probably got less than 80% capacity if it only lasts 1 1/2 hour. It's very likely just at the end of its useful life. If you go to an Apple Store, they can stress test it for you, and very likely you will be told you need a new one.
Coconut Battery will show you the current battery capacity vs. the original battery capacity. Mine has 88% capacity after 259 cycles, but the last time I tried to calibrate it, my Mac shut off instead of going to sleep, although I did get the warning. I don't know if you can really calibrate it if it shuts down suddenly. The health on mine didn't change after the last shutdown.
Good luck!

Could Not Open Handler Error Message

Any suggestions on what to do after receiving the "could not open handler. system memory is probably very low" error message.
The weird thing is the project I was working on worked fine, never receiving that message. Then, I returned to the project after a two week break and now I receive that message.
Any help would be greatly appreciated.

David, Thanks for the reply.
I'm guessing by project details you're asking about DV/HDV etc etc.
The project is a play/show that was taped from two cameras each about 2hrs long. In addition, there are over 7 hrs of behind the scenes footage. The show is shot in regular DV, and the behind the scenes footage is in DV but has 4:3 and 16:9 footage intermixed. I've edited the show sequence, the behind the scenes sequence, a gag reel sequence, and a slideshow sequence.
I'm doing all this on a MacPro 3.0 GHz Dual-Core Xeon 4GB Ram.
If there is more information needed please let me know. Thanks for your patience, first time you know
David

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

Memory full error message when battery is low

(Ive done a check and cant find anything similar)
I have an E71 and keep getting "memory full" error messages ONLY when the battery is low. I have 109 free memory out of 119, and when I connect to the USB it says it doesnt recognise it, so I cant save anything to computer, not that there is anything on there.
The problem is, because it says MEMORY FULL, it wont recharge, even when the charger is plugged in and switched on. Which means basically the phone is useless.
I think this has to be a softwear problem and not a Ive-misused-it-problem because the MEMORY FULL ! message comes up only with low battery.

Hi have you checked if your 920 memory is full via the Settings > Phone Storage to ensure that your 920 has got enough memory? Otherwise, have you checked your car stereo itself (is it a model that has built-in flash storage or hard drive storage) for its memory capacity?

How do I troubelshoot "low battery level detected" message?

I recently restored my Windows 7 Home Premium to its factory default settings through hp recovery manager. All went fine but I am getting this really annoying message at the startup that "low battery level detected" and the battery needs to be replaced. Before the restore operation, I was getting almost 3 hours of battery support and after the restore I am now getting only half an hour.
I am sure its not the battery, there is something else.
I have tried updating the BIOS.
Tried calibrating the battery.
I even have calculated the battery rated output voltages and its giving in 11.02 V even after the system recognizes the battery completely drained. There is nothing wrong with the battery.
Can anyone help me out?
Regards,
Farhat.
hp dv6 1334ca
4 GB DDR3
2.2 Ghz T6600 Core 2 Duo
This question was solved.
View Solution.

cvtwins wrote:
I know next to nothing about computers. I read your post and it seems like this is what I need to fix my computer. I just bought it and everytime I turn it on I get the same error message you mentioned. How did you go about fixing it? Please don't worry about giving too many instructions, the more detailed, the better. Thank you in advance for your help!
See this page to calibrate the battery in safe mode
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&product=4125509&docname=c0081...

Palm Pre crazy symptoms: "phone offline", will not charge battery, will not start, error message "an error has occured that cannot be resolved"

This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide

I can't dismiss the 'low on ink' error message

Hello all,
I have just refilled an empty 301 cartridge and my HP envy 4502 printer is telling me that I am very low on ink. This is to be expected, however the real issue is that my printer will not allow me to dismiss the error message, even though the mini screen has the option to dismiss it.
I wouldn't mind the error message if I could still print, so my priority is to find out how I can dismiss or disable this feature.
Thank you for your time,
Hayley

Hi Hayley (@Hayleycsck),
Welcome to the HP Forums!
The printer doesn't have the ability to disable the ink notifications on it.
What you can try is removing both cartridges from the printer, closing up the access door, pulling the power cord from the rear for 30 seconds. In that 30 seconds, press and hold the power button to drain all excess power from the machine, and then plug it back in. Wait for the printer to say the cartridges are missing or damaged and then insert the cartridge you didn't refill first. If the printer then changes to say only the one cartridge is missing or damaged try inserting the refilled cartridge again. Does it behave any differently?
If not, you may have to look into getting a genuine HP cartridge as opposed to a refilled one.
Hope this helps, have a great day
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Battery Low Error Message

Similar Messages

Maybe you are looking for