Battery low on my Zeen for HP Photosmart Estation 510c Series printer.

I have the HP Photosmart estation 510c series printer & can't remove the zeen from docking station without the battery dieing. And the zeen will not recharge while on the docking station. Any suggestions anyone? I have no AC adaptor, so is it possible to recharge on the docking station and if so how? Right now my battery status says discarging with 0% battery life.

I had the same problem with the B210 series printer. I don't know if this was the actual fix but I got this to work by choosing my printer from the Select Printer Software option from the Print Using drop down in Add Printer. Even though my printer was already listed in the Print Using box by manually selecting it I was able to get past this problem.

Similar Messages

Can't install drivers for HP Photosmart Prem C410 series

OS = windows 7 SP1 64 bit.
Printer = HP Photosmart Prem C410 series.
Driver = PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222-4
in the middle of the install i get the following error:
Fatal error during installation
"sameer.el-khal" is not a valid short file name
please go to http:// www.hp.com/support for troubleshooting information about "fatal error" and "MSI.netdevicemanager40"
Everything craps out from there ...
Got the same error running it general user and as administrator ...
Please help.

Hello @sqldraggon,
Welcome to the HP Support Forums! I see you are trying to install your HP Photosmart Premium C410 to your Computer running the Windows 7 Operating system.
I would like you to start troubleshooting here: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Please let me know the results, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart with C4100 series printer

I have used Photosmart with XP for several years, in particular the 'scan to email' option. I have recently upgraded to windows 7 64bit and loaded the latest 64bit photosmart essential 3.5. There is no longer the 'scan to email' option showing in the pull down list, though the helpfile still refers to it. Is there an additional setup or configuration change I need to implement and if so how do I get to it, or is this a feature which is no longer offered?
If it is no longer available, can you make a version of photosmart availabel to me so I can use it with a vulnerable adult to allow them to easily scan documents to me - making a scan to file and then emailing that file is quite beyond their capability!

Welcome to the HP Forums acetone,
I see by your post that since upgrading to Windows 7, the option for scan to email isn't available.
I can help you with this.
Most likely with the new version, it is no longer a available feature for printer specific models.
When you install the software for the printer, the HP Solution Center loads automatically and might have the scan to email option available. Open the HP Solution Center and check it for this option.
Are you using the latest drivers?
Here is the link for the latest drivers for the Photosmart C4100. Select your model.
Drivers & Software.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps resolve your issue.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do I get to the 'Print Mode Choice Box' in the Apple provided software for a Canon Pixma IP6210D Series printer?

I downloaded the Apple software for my Pixma, IP6210D series printer. There is no 'Color Matching', option or 'print options', pop up menu available. According to the instructional book that came with the printer - the Mac how-to section those options should be available.
In the 'Page Setup', dialog box the 'OK' button is not listed. The two choices are cancel and print.
How on earth do I get to the 'Print Options', box?
Thank you for your help.

Sounds like you have the print dialog minimised, as shown.
If you click the triangle next to the printer name, this will expand the print dialog and from this view you can see all the menu options as mentioned in the guide.

Fuser error for HP Color LaserJet 3600 Series Printer

My HP Color LaserJet 3600dn Printer have Fuser error message. What is the problem ?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also view the article related to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Power cabel for h/p deskjet f2420 series printer

to who ever can help me.i have been given an old printer a hewlet packard deskjet f2420 series.
it has the mains cable missing . the back of the printer receives the cable with 3 straght prongs to push over and the top
slightly angled.if anyone has one or knows where i can get one local to winsford in cheshire. i would be very grateful.
thank you steve

Hello step1hen,
Welcome to the HP Support Forums! I see you are interested in a power cable for your HP Deskjet F2420. I would like you to contact our technical support at 800-474-6836 to see what replaceable parts are available for your printer. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
I will leave you with the Printer Support Page for future reference:
HP Deskjet F2420 All-in-One Printer support
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I cant set up my photosmart eSTATION C510 series

The tablet has frozen at step 8 of 8: Software Install

Hey vanessafromsouth perth,
Thanks for using Apple Support Communities.
It sounds like you are not able to connect to the internet. These articles should be able to help you get connected.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Have a nice day,
Mario

HP Photosmart Premium C310 Series.......Printhead Problem

I have the HP Photosmart Premium C310 Series Printer. It will no longer print. There is an error message of "Printhead Problem", with the instructions of: Remove all Cartridges. Next, left black latch and remove printhead. Then re-install Printhead and Cartridges. I have done this several times with no success. Even went out and bought all new ink cartridges and tried those as well with no success. With this error message on the printer screen, it won't let me get off of that screen.

Hi annie47here, and thanks for the reply.
After reviewing the issue, it's possible you are experiencing printhead failures. The best recommendation I could make would be to contact HP directly. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide.
Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Photosmart Plus B210 series is stuck on "canceling job"

Photosmart Plus B210 series printer is stuck on "canceling job." I have tried deleting and adding it back on. Printer is working on its own and appears to be recognized by my iMac but I can't access the supply levels or print anything. Under printer setup the location is blank...suggestions? help?

Hello @Amiera , and welcome to the HP Forums, I hope you enjoy your experience!
I can see you're running into compatibility issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP Photosmart Premium 310 Series

I just recently got a Macbook Pro. My HP Photosmart Premium 310 series printer worked fine for a month. I uninstalled it, but now it will not reinstall. Now I get the message "Unable to communicate with the printer at this time". I have tried several different things and nothing has worked.
Any suggestions?

Hi
Drivers : http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=4231205
More info
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&lc=en&cc=us&dlc=en&product=5109847
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server.

This is the the alert I keep getting when i try to add this new printer
"Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server."
Im am having BIG problems getting my printer to be recognized

water bar wrote:
I am getting the identical error message for an HP Officejet 7200 series printer.
First there is a message that software is available from Apple. You click to get it. Then it tells you that it is not currently available from the software update server.
I am running OS 10.8.2. Printer is on my home network (not USB).
I went to the Apple Software Dowload site and re-downloaded the latest "HewlettPackard Printer Drivers" (v.2.12) and installed them (twice). No dice.
Anybody found a way around this problem?
I solved all print related issues by avoiding HP, worst software I ever saw, this may not work for you though.

Printing problems with HP Photosmart Premium C310a series

I recently installed an HP Photosmart Premium C310a series printer. Now the printer takes about 45 minutes to print a document. HP support says this is an Apple problem.
Can anyone help?

What file was the problem?
It seems that in the Windows/System32/Spool/Drivers/x64/3, the newly re-installed updated HP drivers (with the 2011-2012 dates) are the only ones with a .BUD extension. Maybe my Win7 computer doesn't recognize them as drivers? The other driver files in the '3' Folder have .dll, .gpd, and .vdf extensions. Is there another spot they should be copied so the computer can find the drivers? I see that up the chain in the Spool Folder, next to Drivers there is an empty folder named Printers.
And what files (Filenames) are needed to run the 309g-m? I assume some older drivers were kept on file when I ran the updated driver Install program. The newer HP 2011-2012 files in the '3' Folder are hpoc30j3.BUD, mxdwdui.BUD, hpc309at.BUD, and everything else is older. I need to know what to copy-paste to a better folder location.
Whatever and wherever the Drivers are, my computer can not find them!

Battery in my Zeen for my e510 exploded

The battery in my Zeen for my HP Photosmart eStation All-in-One Printer series - C510 exploded and popped the back right off of the ZEEN. Now I cannot use it. I emailed HP but they just sent back a generic email to contact a number for PARTS customer service... Anyone having this issue and if so how do I get HP to fix it??

@Kimblke8
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
Cheers,
KarolB
I work for HP
I work for HP

Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

Please help me..?! My iphone 4 is low battery so i'm charging for 8 hours and i turn on it..But the iphone 4 can't turn on..!! Please help me..!!

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Hearing Aid reports "Right battery low for 35 hrs, 23 mins" even after battery replaced - Starkey Halo

In the iOS hearing aid accessibility it reports that the "right battery low for 35 hrs, 23 mins" ever since my right hearing aid (Starkey Halo) reported a low battery condition. I replaced the battery in both hearing aids, but the message still reports in the accessibility page for hearing aids. The only way I got it to go away was to reboot my iPhone 6.
Just wondering if Starkey is interfacing with "Made for iPhone" properly in this case. My audi said that Starkey recommends rebooting your iPhone daily. I wonder if they just don't know how to deal with integration issues and figure that rebooting will avoid the problems.
Anyone else experiencing the same thing?

I have been using Halo i110's since late June and I have never seen the message you reported. Where exactly do you see it?
The only low battery signal I get is the deep voice in my head that says "battery." Freaked me out the first time I heard it. My audiologist hadn't warned me....
One way to resolve some technical issues is to force a re-pair after an iOS or TruLink upgrade. I would also do that if the firmware in my Halos were upgraded.

Battery low on my Zeen for HP Photosmart Estation 510c Series printer.

Similar Messages

Maybe you are looking for