Battery Maximizer on the TaskBar

Sometime within the last few months my T40p stop loading the battery maximizer icon in the taskbar on the lower right. I can get it back by starting at appication manually, but I can't get it to start at boot up. Does anyone know how I can fix this? I reloaded all the latest utilities programs thinking there may be a conflict with some new drivers, but to no avail.
thanks tom

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check for problems with the localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Similar Messages

Is there a version of Battery Maximizer for the R40 running Vista 32-bit?

I have an old R40 / 2896-GZU
I recently upgraded to Vista and found the power management driver V1.67.xx.xx which I installed,
but it seems to just be a low-level driver.
I'd like to attempt to condition the battery as was possible with the "Battery Maximizer" software under XP,
but can not find a version of BM that works on the R40 for the Vista OS. Will the XP version run or is there another option?
ThinkVantage System update V3.16 does not appear to function with the combination of the R40 + Vista as it comes back with no updates at all
Thanks,
Jim
Solved!
Go to Solution.

You're looking at two somewhat different sets of problems here:
a) R40 was never shipped with Vista so any drivers that might come up on the web are likely hacked ones, with no guarantee on how well they'll work.
b) The GPU is not supported by Vista or any of the newer MS operating systems, which adversely affects the entire power setting and is guaranteed to be at least a part of your problem.
Personally, I'd throw Linux on it and call it a day but that's me.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

How do you uninstall the wireless service and lenovo battery indicator from the task bar.

Was wondering if there is a way to remove them from the taskbar. Initially I had just the battery indicator and then I downloaded all the lenovo updates (for bios, etc.) and got the wireless service indicator too. They seem kind of redundant to me, as windows 7 already has their own on the task bar and they're just taking up additional space.
I'd atleast like to get rid of the wireless service.
Will this effect anything? Are they that important?
LENOVO 8BET54WW (1.34), 11/2/2011 - W520 Model 427639U - Windows 7 - 6.1.7601 Service Pace 1 Build 7601 - intel core i7-2820QM CPU @ 2.3ghz, 2310 mhz 4 cores - 16gb Memory

Was wondering if there is a way to remove them from the taskbar. Initially I had just the battery indicator and then I downloaded all the lenovo updates (for bios, etc.) and got the wireless service indicator too. They seem kind of redundant to me, as windows 7 already has their own on the task bar and they're just taking up additional space.
Right click on the Lenovo battery gauge in the taskbar, click "Launch Power Manager", click Options, clear "Show Power Manager Gauge in taskbar" check box. If Options tab is not available, switch to Advanced mode (upper right corner of Power Manager).
Don't recall specifics for Lenovo network icon, but is probably just as simple. Would be better (IMHO) to get rid of Access Connections altogether.
Removing the icons will have no affect on anything, except your piece of mind from removing these ugly and redundant symbols of bloatware. They are NOT important.
W520 | FHD | i7-2720QM | 8GB RAM | nVidia Quadro 1000M | Intel 510 120GB SSD | Seagate 7200rpm 500GB HDD
T510 | 1366x768 | [email protected] | 8GB RAM | nVidia NVS 3100M | Seagate 7200rpm 500GB HDD
T61p | 1920x1200 | [email protected] | 4gb RAM | nVidia Quadro FX 570M | Hitachi 320GB HDD | (broken frame, now a file server)

My firefox sits in the taskbar and doesn't maximize...help!!!

I click the icon in the taskbar and it opens up, but doesn't maximize. I've uninstalled an reinstalled several times to no avail. I'm using Windows 8.1 OS. It was working fine, then last week, just won't maximize to see anything. I don't like using IE. This still works fine on my laptop which also has 8.1. I can't use the reset option because of the maximization problem.

Everything I see is for
Windows XP or earlier and I'm running Windows 8.1. Are there any instructions for this OS? I'm not very good at doing things on the computer, so easy instructions are the best. Thank you.

Firefox will not display (It will not "open", although it looks like it's open in the taskbar)

I'm not sure if it's coincidence that it updated itself to 37.0, but it must be...
When I click on Firefox both on Taskbar and on Desktop icon, it opens on the task bar, when I highlight the task bar it even shows that Firefox loaded Google (my default webpage)... But it never come up on screen.
I have:
- Windows 8.0 (not 8.1 and I do not intend on upgrading since it functions better than 8.1)
- Noscript add-on/plugin, possibly more
- up-to-date drivers
I have tried:
- Uninstalling and reinstalling newest version (37.0)
- Uninstalling 37.0 and Installing from Firefox website archive 36.0
- Restarted my computer after installs
- disabling maintenance service on install
I have "allow"-ed the install windows popup both times and it doesn't help.
The first time it tries to open it does go to the yellow background on taskbar of opened programs you haven't used yet...
However, when I click on it nothing comes on screen. When I highlight it still shows my homepage there. I cannot do the firefox refresh thing because I can't get it to even display. I do NOT get any error messages on my computer, which is more bizarre. I've updated and ran windows defender complete scan and found nothing (but that's not surprising for "defender", lol).
Once it opens the first time, even opening another page opens nothing. Then it freezes and won't close, even if you right click and try to close all windows... I have to use Task Manager to close it by End task...
I don't know how to open the troubleshooter "xpi" thing, sorry....
And not to whine, but why is it so broken all of a sudden XD... And more importantly, how in the world can I get it back working??? I'm using this terrible chrome I was lucky enough to just have on my computer already, which I only had for viewing one single thing a long time ago and forgot I even had Chrome... And as much as I hate using chrome, it's actually working flawlessly for me right now... So please any help will be much appreciated...

Sometimes the Firefox window gets "off screen" somehow. You often can force it to appear on the screen by right-clicking the little thumbnail image above the Taskbar and choosing Maximize. Does that work?
One possible cause for this is that the file which stores window sizes and positions has become corrupted.
'''Method #1:''' ''If you can get a maximized window:''
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window listing various files and folders in Windows Explorer.
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
Start Firefox back up again. Do windows display normally again?
'''Method #2:''' ''If you cannot get a Firefox window at all:''
Shut down Firefox by right-clicking the taskbar icon > Close All Windows.
Using the Run dialog (windows key + R) or the Start menu search bar (or in Windows 8 maybe the charms bar search bar?) type or paste the following and press Enter to drill down to the Profiles folder:
%APPDATA%\Mozilla\Firefox\Profiles
Here you may see one folder -- in which case, double-click into that -- or more than one folder -- in which case, double-click into what looks like the most recently updated.
Scroll down and rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
Start Firefox back up again. Do windows display normally again?

Battery Maximizer Lenovo 3000 Series

I would like why no Battery Maximizer software for 3000 Series systems/notebooks?
Why only for ThinkPad series?

I tried but it says "cannot install on this system"
whats more interesting? the lenovo training website says you need to use the battery maximizer software to get maximum battery time.
So I ask where is battery maximizer software for N100 3000?

Hide Object in the Taskbar when Frame is down to Tray

Hi Everyone,
I've a new Question. I've implemented SystemTray functionallity to my app. I'm able to minimize or maximize or close my app. But when I minimize the Frame the object in taskbar is still there. Is it possible to clear the taskbar from this object when I send it to tray. I used states to min- and maximize (iconfied, normal).
Furthermore I have to say I'm working with Linux. When I minimize the Frame the object in the taskbar gets a little transparent. May it be not there if I would use Windows? I don't have access to a windows machine right now.
Thx for your suggestions

camickr wrote:
Only JFrames are added to the task bar.
Use a JDialog or JWindow.That was fast, i'm gonna try this out right now. Thanks!

How do I Maximize all the Windows

Hello,
Greetings!
How do I Maximize all the opened windows in CS2

People sometimes use the term "Maximize" incorrectly.
Maximize means to cover the screen. Do you really want each window to cover the screen? That will make only one of them visible at a time.
Or did you mean to say "Restore" all the windows? "Restore" means to change a window from minimized to visible again, as a window that does not cover the entire screen. If this is what you want, one quick way (with Windows 7) is to go to the Taskbar and click on the button/icon for each of the minimized windows you want to work on. Each has a Taskbar Live Preview Thumbnail so it's easy to pick which ones.
If you really do mean "Maximize", and your intent is to work on one window at a time, perhaps what you should consider doing is using the Tabbed view mode. That makes, by default, each window being worked on cover the Photoshop main window. It's a different way to manage multiple documents, and it sounds as if it might match your way of working better.
Hope this helps.
-Noel

FireFox's buttons on the taskbar often change position

Firefox's buttons on the taskbar often change position. If I click on a button frequently (in order to bring the window forward), the button for that window will start to jump to the end of the other buttons. Since the buttons are no longer in the same order, I end up having to search for the right button constantly. This is a huge annoyance.

I am guessing that there is an auto hide feature turned on for your taskbar:
Try this: "Reset taskbar to normal, open FF maximised then set auto hide."
from: [www.sevenforums.com/browsers-mail/195149-win7s-autohide-taskbar-function-defeated-maximize-firefox.html]

I have a one group of tabs stuck in the taskbar, it won't open.

I had 2 groups of tabs. One group opens & works, but the other is stuck in the taskbar. i can click it, or right click & then Restore, but the window containing that group of tabs won't open. The other group works fine. I have exited Firefox, then restarted Firefox (15.0.1) same thing, there in the taskbar, but won't open. Also restarted Window Vista, then Firefox to no avail. Any ideas?

Well I'll be, I right clicked the group on the taskbar& then hit maximize, which worked. I've been using group tabs for awhile, never had to do that before.

I would like to open a Firefox browser with multiple tabs per topic, like work1/work2/hobby and see that given name in the taskbar, instead of the tab-name

I usually open a new browser window per subject, let's say I'm shopping online for something and open about 5 tabs for that, but in the same time I am working on 2 systems which are lookalike, but defenitely should not be mixed average 6 tabs open per subject. Also I read something on my hobby and I open another window and want to read a few tabs on that.
I don't want them to mix and preferably I'd like to see a self-chosen subject for a minimized window in the taskbar.
Is there a feature like this or is it possible to add a feature like this?

Another alternative by the way maybe to use multiple Firefox profiles. I will give more information on that if required. It is fairly easy if you are used to using computers but not something this forum officially supports with KB articles.
The bult in Tabs groups sounds more like what you want. Did you try that ?
As for trying to interest Developers. You could make a comment using ''feedback'' but I would not hold out much hope unless you yourself know a developer willing to undertake the coding and press for its use. Maybe you would be more likely to interest and get something from add-on developers, assuming a similar add-on does not already exist.
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

Computer clock resets to 1969. PRAM battery probably not the issue.

I have a PowerMac G4 mirrored doors computer running Tiger 10.4.11 that occasionally starts up with that error message saying: "Your computer's clock is set to a date before March 24th, 2001. This may cause some applications to behave erratically."
I know all about resetting the PRAM, resetting the NVRAM, and replacing a weak, or expired battery. I've read the relevant posts on the subject, in which well-intentioned guides say that the problem is "usually" or "generally" related to the PRAM battery. Well, I wish it could be that simple, because I have already had a new battery installed, and the problem continues. It is intermittent; it's been occurring for about six months now; and it persists.
I seek technical assistance and successful, problem-solving suggestions that go beyond merely suggesting that I zap the PRAM or replace the battery.
If there are potential SOFTWARE problems, please direct me to those potentially damaged files. None of the disk utilities that I have used—including Disk Warrior, TechTool Pro, OnyX, Cocktail, or Drive Genius— find anything wrong with my hard drive or the files on it. No corrupted resources are reported. Additionally, Intego's Virus Barrier finds no infected files either.
However, a FileBuddy search of files modified before 3/25/2001 finds several dozen files with improbable dates of 12/31/1969 or 1/1/1970. Fewer files dated 12/31/1969 occur after I go to the Date/Time preferences pane and reset the clock to the current date/time and then restart my computer, especially in regards to system-related files. Nonetheless, several dozen files with a 12/31/1969 still remain, even after the date/time reset and the system restart.
I do not know if any of those pre-historic files are playing a role in this chronic problem, so I offer that information for the technically more astute to ponder upon and factor in to any solutions which might be offered. I have read posts where someone might suggest a re-install of Tiger, but the original poster almost always reports that re-installing Tiger did not eliminate problem, so I would prefer suggestions that rely on a scalpel rather than a sledge hammer.
If someone suspects that there may be hardware problem, I would like to hear theories along that line, too, although I am unlikely to consider gutting the hardware items just to retain the attractive computer case. Even though I do have other computers (an iMac G5 and a MacBook Pro), the PowerMac G4 is my preferred workhorse, and it is the only one configured to run Final Cut Pro (version 4.5; I can't afford to upgrade now), so I want to keep it functional without a major investment into an older machine.
When the computer clock problem first reared its irritating head several months ago, it was accompanied with kernel crashes that turned out to be related to the nVidia video card. I brought the machine in to a local shop, because it was refusing to power on. They installed a new battery to replace the original, probably weak original battery, and they replaced the probably defective nVidia video card with a used nVidia card I found on eBay. The shop also claimed that I needed to replace the motherboard and the power supply to ensure that the G4 would power on and that it would present a desktop without the warning message about the computer clock being set to 12/31/1969.
I decided to reject their assessment, since the whole repair job would have amounted to about $1,100. It seemed like an excessive solution. Since taking the G4 back about three months ago with only the new battery and the replacement video card installed, the computer has powered on every single time without fail, which, to my non-technician mind, would appear to indicate that the power supply is OK. However, I do still get an occasional warning about the computer clock being set to a date before March 24th, 2001.
I do not have the technical expertise or repair knowledge to know if the problem is hardware-related, software-related, power supply-related, or a complex interaction between all of them. If someone can suggest a permanent fix to eliminate the computer clock error problem WITHOUT requiring me to make a major investment in repairing or replacing hardware components, that would be ideal. On the other hand, if this clock problem is merely is an irritant, but not a sign of something more serious or expensive, then I am willing to live with it and get around the problem by going through the steps of resetting the clock when required and then restarting the computer with a correctly set clock.
My main goal, of course, is to have a reliable, stable computer. If it costs too much to eliminate the computer clock irritation on a permanent basis, then I am willing to live with the problem, as long as its presence does not disrupt my work flow. In that case, I would appreciate it if someone could explain what might be going on, so that I know what to expect and what to do about it.
I hope this is sufficient information with which to make a diagnosis and recommendation. If not, ask for more. Thanks.
bowlerboy

Short answer =
5) Upon reboot after re-connection and re-start, the Date & Time shows...
a) in the Date & Time pane: 12/31/1969 at 7:00 PM, and counting
b) in the Finder's menu bar: 7:00 PM, and counting
What do the results of this test tell you? Is this a software or a hardware problem?
======================================================================
Long answer =
Thanks, BDAqua, for offering your help. I'm not exactly new to these forums, but somehow my previous contributions have all been wiped out, so I've restarted under a new account name.
I've had my G4 MDD for five years, and it's always been quite stable for me, so I'm not quite sure that this model is "cantankerous." I do find the computer clock error message irritating, though, so it would be nice to know the source of the problem and its permanent solution.
Since my original posting, I elected not to Shut Down the G4 to see what would happen. It functioned just fine since then, allowing me to create some short Final Cut Pro movies as Christmas presents to family members. With one exception, all other applications also functioned without problems. The only problem I'm encountering has to do with H-P Photosmart Studio, an application bundled with the HP All-in-one model C7280. It will not settle down to work, forcing me to Force Quit it every time. Since that app works fine on my iMac G5, I decided to trouble-shoot it by reinstalling the HP software, a process that requires me to Shut Down. (If possible, I want to see if the problem is with the HP software, or with Tiger on my G4.)
However, before I can get even get to trouble-shooting the HP Photosmart, the G4 gives me that computer clock error upon re-boot. In the past, the Date & Time error message has appeared upon a cold reboot, no matter whether I had reset the Date & Time in the preference pane via the Network clock or manually. However, I never conducted my tests in conjunction with disconnecting the A/C power cable. So, I decided to try the the test you suggested. Here are my observations and the results of the test.
1) Upon Shut Down, cool down, and restart, I get the computer clock error message mentioned at the beginning of my original post, telling me that my clock is set to a earlier date.
2) When I open the Date & Time preferences pane, however, the date and time shown there (as well as on the Finder's menu bar) is current.
3) The Network setting was ON, so, to comply with this test, I unchecked the "Set date & time automatically" box. I do not need to reset date and time manually, because, as I mentioned they ARE set correctly, even though the message I got upon restart said that they are not. (If memory serves me correctly, though, the Date & Time panel would actually show 12/31/69 as the computer clock's read-out, so this discrepancy is somehow connected to this problem. )
4) I shut down the G4 for 2 hours, and I disconnected all cables and plugs to it, including A/C power.
5) Upon reboot after re-connection and re-start, the Date & Time shows...
a) in the Date & Time pane: 12/31/1969 at 7:00 PM, and counting
b) in the Finder's menu bar: 7:00 PM, and counting.
6) I take screen captures of the error message and the menu bar: both .PNG files are time-stamped as of 12/31/1969 at around 7:01 PM.
7) I will now reset the clock to the current Date and Time by turning the Network time feature back on, so I can get on with my work while the trouble-shooting process continues.
What do the results of this test tell you? Is this a software or a hardware problem?
If it's a software problem, then should I do I clean install of Tiger? If I do that, is there any evidence that a clean install will do any good to eradicate the problem?
On the other hand, if this is a hardware issue, is it contained to merely being an irritant that I can fix merely by adjusting the Date & Time whenever the problem occurs (which I can live with, as long as the system is stable after that fix), or is this error message regarding a sign of something more ominous failing on the motherboard?
bowlerboy

Not getting notifications in the taskbar anymore

Hey,
i just tried a lot of stuff and it still doesn't work so i'll ask here.
Status:
my Skype showed Notifications in the taskbar and played a sound when i got a new message till 3 or 4 days ago.
I didn't change anything in Skype and i'm not aware that i changed anything on my pc since then.
EDIT: Additionally i just found out, i dont have Notification or message counter for new messages besides the contact name/picture in the skype window. I don't hear the sound when skype is the active window and i am in a different conversation and someone messages me. (NO MESSAGE NO SOUND NOTIFICATION ???). Only when im in the conversation already i hear the sound, and thats because i ticked that option in the skype sound menu to test.
My sound settings are on, my skype settings for incoming messages are on. If someone calls me i get the ring sound. In the taskbar theres no orange indicator anymore for new messages.
What I already did:
- installed over my current installation
- did a clean install (deleted appdata folder)
- restarted pc
- unpined and pined the program to the taskbar, tried without pinning it
- ran as administrator and without it
running Windows 7 on newest updates, drivers are updated, rest of the pc runs fine, skype version 6.21.0.104, if you need additional infos tell me
ATM I'm rather clueless where the problem is, it kinda just appeared. It's really annoying if i don't hear nor see when i have new messages.
any help is appreciated
[Removed for privacy]
Solved!
Go to Solution.

Given the number of users with notification problems, and always the same remedy "click on user, go to Conversation menu, edit Notification Settings" I was rather thinking of a small Skype gui design flaw here. Why isn't the Notification Settings entry listed in the -context- menu? (right click on user)
Until now I've always been thinking that the top menu bar Notification Settings entry was some -global- setting, for all users at once.
Thx,
Andre

How do I restore my Ipad 4 from my desktop computer? My charger was broken. I bought a new one but now it won't charge. I have a BATTERY bar in the middle of the screen that is flashing RED and I have a symbol on the bottom that looks like a charger.

How do I restore my Ipad 4 from my desktop computer? My charger was damaged so I bought a new one but it won't charge. On my Ipad, I have a BATTERY bar in the middle that is flashing RED and an icon on the bottom that looks like the end of a charger. I have tried to force into reset mode, by holding the sleep key and home button SEVERAL times but it does NOT work. I have plugged my Ipad into my desktop computer, but I do not have a screen on my desktop that is coming up. THIS HAPPENED BEFORE AFTER I DID AN UPDATE AND WAS LOCKED OUT AND I USED EITHER ICLOUD OR ITUNES TO RESTORE, NOT SURE WHICH AND I FORGOT HOW.

Hi MrsMoosie,
I'm sorry to hear you are having these issues with your iPad. If your iPad isn't responding or doesn't appear to be charging, you may find the information and troubleshooting steps outlined in the following articles helpful, in particular the following portion:
If you don't see the charging screen within an hour, or you see the connect to power screen, check your connector, USB cable, and power adapter. Make sure that everything is plugged in firmly, free of debris, and not damaged. You might want to try a different USB cable or power adapter.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

When closing Firefox 23 with the taskbar, the dialog wndow is obscured behind it and I can't select close unless I keep clicking and it appears in front. Fix?

Got Firefox 23 forced on me while doing reinstall. First off the icon on desktop and start menu shows a white box around the Firefox icon, this by design?
Also When i click to close Firefox using the taskbar tab it partially hides behind the taskbar and I am unable to click it. Sometimes it appears in front as all the other programs do/should but rarely. V22 didn't have this problem. Is this also a feature or bug and how can I downgrade to the far superior version 22?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Battery Maximizer on the TaskBar

Similar Messages

Maybe you are looking for