Battery not charging when MBP is RUNNING

Strange thing just started happening, when my MBP is running my battery is not charging (green light on MS, says not charging on screen). When it is asleep or shut down I get an amber light and it does charge. It will also charge iPhone over USB.
When it's running it will go till the battery is drained then shut down. Also since I got it last year, if the battery is dead it will not power on for 30 min or so.
Replaced battery 5 months ago with apple orig, has 51 cycles on it. Tried a PRAM and SMC, no change. Tried many ac plugs, no change. Hard to get it to an apple dealer: any ideas?

Have you been calibrating your battery per your user manual schedule?
Calibrating your computer's battery for best performance
Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. *_Do not include any serial numbers._*
Apple Portables: Battery may not show a full charge in Mac OS X
Apple Portables: Tips for maximizing your battery charge
Apple notebook batteries – maintenance and troubleshooting

Similar Messages

  • WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

    WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

    How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    And for info typing in capitals is considered SHOUTING.

  • Battery not charging when plugged in

    I have a Pavillion g6-1d11dx laptop and I have two problems (and I don’t know if they are related). First, I have been having trouble with the battery not charging while it is plugged in to the AC outlet. The battery icon in the systray currently says “40% available (plugged in, not charging)” and the percentage has been consistently going down over many weeks. Most recently, when I unplug it from the AC it no longer goes to battery reserve, it just loses power entirely (and when I plug it back in and turn on the power I get the “system was not shut down properly…” message).
    Second, and I don’t know if this is related, but for several weeks the fan has been running, seemingly non-stop, especially overnight. I don’t know if it’s relevant, but I have a scheduled nightly (1 am) definitions update and full scan that usually takes about 2 to 2-1/2 hours. But my wife says no matter when she gets up in the middle of the night, the fan is always running, and the unit has been very hot. My wife has been concerned about a fire (though it's not a model listed in the recall). I downloaded a BIOS update from the HP website hoping that would help. The fan seems to have been running less, but hasn’t stopped entirely.
     I wanted to see if I could detect any problems with the battery, so I went through all the suggested troubleshooting protocols listed on the HP website, but ran into a hitch when I tried to use the HP Support Assistant utility on the laptop. When it opens, the Support Assistant displays "An error occurred" (instead of "Support Assistant") in the window's title bar and the system variables ([Product Name], [Serial Number] and [Product Number]) listed in the Support Assistant status bar all say "Loading...", but never do load. When I go to the Maintain mode to check the battery status, it says "No pending action", and, as suggested on the HP website, I click the Refresh button (then, in the pop-up window that appears, I choose the “Check all updates, but install only important updates automatically” radio button, then click OK). But while the result page displays “Pass” on the checks for “Connect to HP servers” and “Preparing the action list”, it displays “Fail” on the checks for “Downloading updates”, “Gathering information” and “Analyzing your system”. Oddly, when I run the system check from te HP website, it DOES auto-detect my system info (Serial Number: 5CG21919LT; Product Number: B7S84UA).
     I tried to open the HP Connection Manager utility, but I get the HPConnectionManager.exe fails to load ("Cannot load assembly: CaslShared, Version=3.5.1.1, Culture=neutral,  PublicKeyToken=9c6f83d5b7f3d097. The application will now exit.").
    Can someone tell me how to properly connect to HP to allow the utilities to do their diagnoses? And/or why my battery isn’t charging and I can’t get a system diagnostic?

    I should note that this unit is pretty new: purchased in august 2012.

  • Battery not charging and MBP not waking up from sleep

    I've got both of these issues happening. Sounds like I just have to wait it out on the sleep issue until a point at which Apple will issue a fix. The battery not charging is becoming especially frustrating though. I've had the computer for about a month and it just started a few days ago. I've checked the battery to see if it qualifies for replacement and it has the correct model number but the s/n has a different last for digits. I've unplugged/removed battery/held down the power button and no change, the battery still does not charge. Seeing as the MBP will run with the power cable inserted and the battery removed, I'm assuming that the cable's ok, the light has rarely come on at all lately -- no green or amber. Any advice here? I'm getting pretty frustrated with this thing.

    I met the same issue, the difference is while i touch the track pad or move mouse or hit keyboard, the screen responds rapidly and then back to black. tap the keyboard, it beeps... I can do nothing except "command+control+power" to restart or long press power to power off it.
    I found it only happens after I installed 10.8.2, it works well before 10.8.2 update.
    any help please?

  • Battery not charging when in sleep mode

    This might sound like a dumb question but, is it normal that my shuffle does not charge when computer is in sleep mode? It's been plugged in for the last 6 hours and the amber light is still flashing. Can I change the sleep mode on my computer? surely I don't have to be working at my computer for 4 hours every time I want to charge the shuffle. thanks
    G5   Mac OS X (10.4.3)  

    You can also change your SysPrefs so that the Mac doesn't go into Sleep when you don't want it to .... for example, when you want to charge the iPod. You won't lose much by doing this; it can still be set up to shut down the display and your hard drive.
    My own preference these days is to disable automatic sleep completely. If I wind up leaving for a few hours or an afternoon, I don't mind leaving it in the 'near sleep' mode that it goes into and even that happens only when I overlook putting it to sleep manually. You can do that with the remote, with the power button, or of course via the Apple Menu.

  • MSI GS70 Stealth Battery not charging when plugged in.

    Hey guys,
    Bought my GS70 stealth in late 2013 so my warranty has expired and am trying to fix the problem on my own but have had no luck.
    Basically, I didn't use the laptop for a few weeks, went back to it and it wouldn't turn on (even though I always leave it charged). I plugged it in to try to figure out what was wrong and the battery came to life at no charge.
    The battery said 0%, plugged in but not charging. Also of note is that it wouldn't connect to the internet. It could detect wifi but wouldn't actually go through and connect. Not sure what is wrong with that.
    Anyways, I found this thread: https://forum-en.msi.com/index.php?topic=175933.0 and tried doing what was said in it but to no luck.
    I set the thing to manual but when I try battery calibration it still shuts off immediately.
    Does anyone know what to do or where I should go? I desperately need help :(
    Thanks in advance.

    Hi, did you still connect AC adapter when you leave the laptop?  Over-discharging for a long time may cause a short in the cell.  Whatever, I think you need to let service center check the battery.
    As for the WLAN, uninstall old WLAN driver and download latest driver from MSI website and install it.  That may help.

  • Lenovo ideapad S400, battery not charging when plugged in

    Hi, I had the problem where the battery didn't charge at all even if it was connected in the right way and the charger was plugged in. So I started to search internet for possible solutions. Those I found where to 1) disable alt uninstall ac and acpi adapter in Windows Device Manager. Restart computer.. Not charging problem is related to some Windows issue. 2) Choose the alternative "maximum battery life" in Lenovo Energy management.. Neither worked after several and time consuming tries... The problem here is Lenovos "smart" Energy management system that prevents the computer from charging the battery to "save it".. Solution: Uninstall Energy Management (Publisher: Lenovo) under Program and Features in Windows Control Panel and the problem is solved.. And don't reinstall this **bleep**ty program again....

    I should note that this unit is pretty new: purchased in august 2012.

  • My original Ipod 30gb will not charge when plugged in (suspect battery completely dead...). Help

    My orignal 30gb ipod will not charge when plugged in to a power socket. I think the battery has completely run down. Any thoughts?

    Which model is this iPod.  The "original" iPod was 5GB or 10GB, so this must be a 3rd gen iPod, at the earliest.  This document shows all the iPod models.
    http://support.apple.com/kb/ht1353
    If it's a 3rd gen iPod, it has a dock connector, but it needs to be connected to a FireWire port to charge.  It does not charge from a USB port.

  • My info for battery charging says "Not Charging" when it is charging as per dashboard widget.

    My info for battery charging says "Not Charging" when it is charging as per dashboard widget. Since change to lion all slowed down do I need more ram ( have 2 gig). Lost  some icons in web site icons and other random icons. So far SL better.

    Yeah, it was purchased in August 2008. I'm not really sure what a charge cycle is, but I do plug it in and unplug it a lot to a power source. Mainly because I keep my computer on most of the time (either on or on sleep). So between taking it to classes and stuff, I'll recharge in between and when it's really low, otherwise I run it off the battery most of the time.
    On a sidenote, I have went to that information thing about about the battery after letting it sit plug in for a few hours, and now it has this information:
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB016-38ea-4762
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 61993
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 61993
    Health Information:
    Cycle count: 324
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1208
    Voltage (mV): 12129
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 60
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 2
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: No
    Charging: No
    Message was edited by: Akalboy
    Oh, forgot to note. Now the time remaining is 10 hours, which is DEFINITELY wrong.

  • HP Envy Battery Problems - not charging when on, charging fully when off

    I've had my HP Envy laptop for about 3 months, and yesterday I noticed that when it was plugged in it wasn't charging (the battery icon says "plugged in, not charging"). I turned it off overnight, plugged in, and this morning the battery was fully charged. It only seems to not charge when it is turned on. I have tried removing the battery, turning on, deleting the ACPI-compliant control method battery, turning off, and turning back on again (as advised in other forum responses), but with no joy. At first I thought it could either be a battery issue, but the fact it fully charged overnight whilst off would lead me to believe it's not, and is probably a software / settings issue. Any ideas please, I've run out of google search ideas!!

    Hello HowfenClaret, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number we can provide you with accurate information. How Do I Find My Model Number or Product Number?Which Windows operating system am I running?Is the Windows Version on My Computer 32-bit or 64-bit? Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!

  • Droid X battery  will not charge when phone is in vehicle mount

    Droid X battery will not charge when phone is in vehicle mount. If you plug phone directly in to car charger it charges fine. This makes using the GPS virtually useless as it runs down the battery very fast. Anyone else have this problem. Other wise I love the phone.

    Many of the Verizon Droid X car mounts have defective wires in them. This problem is widely reported on many forums and websites. You should return your product for a brand new replacement that is not defective  (that is, the car charger will charge your Droid X when it is in the car mount).
    I happen to love the Verizon Droid X car mount. Lot of ways to adjust it from different angles for different placements. Just get a Verizon Droid X car mount replacement that does not have defective wires in it, and it should work just fine!

  • MBA battery does not charge when connected. Help!

    My MBA battery does not charge when connected to the charger. Ive checked the other threads and followed advice but nothing seems to help.. My battery health info is good, I've tried cleaning the magnetic pins of the charger, reset smc but it still does not charge. The light on the charger is green or does not come on sometimes, and it's the same for a few Power outlets. What else can I do? Would greatly appreciate any help! Thanks.

    It recognizes the charger intermittently. After cleaning, it showed the charger as connected but not charging the battery. I will try my friends charger later to see if it works. Thanks for your help!

  • TS3499 When the charger is connected, it shows battery not charging as the status

    When the charger is connected, it shows battery not charging as the status.

    If the battery % is above 95% it doesn't charge. Let it drop below 94.

  • Battery does not charge when plugged in

    Battery of my i phone 5 does not charge when plugged in!

    Hi
    Try this:
    Disconnect AC
    Shutdown
    Remove battery
    Connect AC
    Startup
    Open Device Manager
    Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
    Click the plus (+) sign next to System Devices.
    Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
    Shutdown
    Disconnect AC
    Insert battery
    Connect AC
    Startup
    Also request you to try updating the Bios once on your unit.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Battery does not charge when asleep

    Ever since I upgraded to Tiger my PowerBook battery does not charge when it is asleep and the display is closed. It only charges when the computer is active and display is up. Anyone else experiencing this? Solutions/work arounds??

    Hi, Donald. Try resetting your Power Manager, and you might also trash the preference file com.apple.PowerManagement.plist. If you trash the pref file, be sure to restart and reset your preferred Energy Saver settings afterward.

Maybe you are looking for