Battery not installed after update

I just updated my ThinkPad W520 using the System Update utility and after rebooting I realize that the battery icon is totally gray and shows the message "Battery not installed".
Checking the installations log of System Update I see
-Lenovo Power Management Driver 1.67.04.05
-Power Manager for Windows 7 6.66.1
And the Windows battery icon shows the info correctly
Is there any way to unninstall the updates?
Solved!
Go to Solution.

I have applied the same updates and the battery icon shows correctly on my W520. Are you using an OEM battery?
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

App do not install after update iOS 5.01

After updating to iOS 5.01 only a few of my 137 App do synchronize. iTunes error message: Could not find the file for ...app (translated from German). Also reinstall out of a backup did not help. The same problem.
The apps are organized in folders. If I check the missing apps in iTunes to synchronize, the were not put in the original folders.
I do also have iCould Backup but I suppose that this does not help becaue meanwhile the backup was made automatically.
Can anyone help?
Stefan

I could solve the problem: the Apps are stored in "MyMusic/iTunes/<Username>/Mobile Applications". But some of my Apps were stored in a folder within iTunes Media. Just copied those back to there original location and sync worked.
I do not know, why I had a second folder. I think the error message from iTunes is not very helpful and all is very intransparent.

Apps missing or not installed after update

after i updated to the last nokia firmware on my E71 some apps where not there i got an error message from the setup wizard when i was trying to set up the email client saying INSTILLATION PACKAGE NOT FOUND CHECK THAT MEMORY CARD IS INSERTED. seriously what does the memory card have to do with the setup? iv tryed to reset the phone and also iv format the memory card and iv also tryed to do this with out the memory card in the the phone the results are the same. and iv tryed to get the email app form the nokia website but it just gives me the IM APP which i also had to download from the nokia website also i still wondering about updating throught ovi suite cause the last time i did the update did not compleat and i had to get my phone flash after i did

Hello Adam,
Welcome to the Discussions.
Your girlfriend's computer is not downloading because it now lacks the essential plugin "VerifiedDownloadPlugin.plugin", which would have been in System X/Library/Internet Plug-ins. There are other essential plugins as well, and unless you did not empty the Trash, they're gone too, and you'll have other problems.
I would reinstall Safari 2, which is available only through the Tiger DVDs. In order to get to the Safari package, you'll need the brilliant programme Pacifist, which is a piece of shareware that enables you to install individual packages from the DVD.
There might be other work-arounds; but I suspect that this aptly named piece if kit will prove by far the quickest, the most reliable, and the one most likely to produce a peaceful Christmas!
All good wishes,
Martin
Powerbook 15-inch G4 1GHz Mac OS X (10.3.5)

IPhoto not "installing" after updating to Yosemite

I have just updated to Yosemite.
My old iPhoto won't work.
I try to download the latest version of iPhoto, which says is downloading, but when the download ends it never installs.
Correction - the "Instal" doesn't complete.
The site just says "Installing" but it never completes.

Here's the deal....First I backed up my iPhoto Library; downloaded the iPhoto Updater 4 times; each try it popped up on my desktop within seconds and
did its thing; I continued to click on iPhoto in the dock and application folder and was lost in that loop.
FINALLY I searched "This Mac" for iPhoto and hidden amongst the gems was the app "iPhoto LIbrary Upgrader."
I'll be ****...
Click, open, update, upgrade and up my #%@
It worked like Apple said it would.
Good luck and good night.

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...I have uninstalled and re-installed several times now without any luck.
Thanks,

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Apps will not install or update after ios 8 installation

Apps will not install or update after ios8 installation

The solution that worked for me was to identify the apps that were stuck updating, and then find them on my iPhone. (You can't search for them, you have to find their icon on your iPhone's desktop.) Then I deleted those apps. Then I went back to the App store, and they downloaded/updated like normal. I did the same thing for the same problem on my iPad, and that also worked.
Best of luck to everyone.

Illustrator not launching after update and re-install

Illustrator will not launch after update(CC) and then also upon uninstall then reinstall.
Any ideas? The application was working fine untill I did the upgrade.
Mac10.6.8

does any other cc program launch?
if no, uninstall them all
run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer
reinstall your apps
if yes, reset your preferences: hold down Option+Command+Shift while starting. you will see a confirmation dialog if done correctly.

IOS 7 app store update list does not clear after updates have been installed

iOS 7 app store update list does not clear after updates have been installed

Rifles wrote:
Good point, we will have to wait and see, it's a pity Apple has not produce an IOS7 PDF
You mean like this one?
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck.

T540p Energy Manager shows "Battery not installed"

Strange issue with my T540p: After having the machine running for the whole day unattended on mains power I come back to a grey Battery symbol with a mouse-over "battery not installed". The battery provides power, as the computer continues to run when disconnected from mains. Shutdown, taking out battery, wait does not change anything. The machine is a Win 7 x64 Power Manager and drivers installed via Lenovo Systems update, dirvers are current, no new available. Did anybody experiance this issue?

Thank you for your reply, richk! I have tried numerous things, restart, with battery either connected to the mains or not, restart without battery but with mains , taking out battery while it was running. I checked, whether there are old Software/Drivewr packages with the software recommended by ColonelONeil, checked for new drivers, reinstalled energy manager - same thing... Is thereany software, i can use to check whether there is communication with the battery? By the way, I see a new BIOS version, but I can not install as the process requires a "fully charged battery"...

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

Issues not resolved after updating to latest SP BO 4.0

Issues not resolved after updates to latest SP
We initially installed BO 4.0 with SP4 FP3. After that updated the installation to SP6, SP7, SP8, SP9 and SP9 patch3. We skipped SP5 as it had no issues effecting the way we work.
Now we discovered that most of the important issues for development like being able to modify merged dimensions by adding a dimension are not resolved, despite the updates which would have fixed the issue.
Any ideas?
Is it possible to install SP5 afterwards and then update again to the new SP10?

You don't need to install SP5. Latest SP you have installed, will have all the fixes of SP5.
You cannot install SP5 after installing SP9. There is no need to install aslo.

App not install after 3 days HELP

I bought an app called Day One on the 15th of July, it still did not install after 3 days.
Everytime I try to install it, this message comes up 'Day One failed to download use the purchases page to try again.'
This is what shows up on the launchpad.

Hey
Could you try updating to the latest version of iOS (8.3)?
Let us know if the problem persists.
Thanks

HT1766 Recently updated my iPhone 4s to the iOS 6. Now I can not install application updates, my music library has vanished, iTunes Match (in Settings) keeps setting itself to "Off".

I recently updated my iPhone 4s to the iOS 6. Now I can not install application updates, my music library has vanished, iTunes Match (in Settings) keeps setting itself to "Off". I have also logged off of iTunes in Settings, and it will not let me log back in. Just a few moments ago when I again tried to log into iTunes, it asked me for my Password, then replyed that I had no Match account; but I do. Is Restore the best option?
Any suggestions

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

F5 is not working after update of windows 8.

f5 is not working after update of windows 8 in my laptop. Rest of the function keys are working.
my laptop details are
Product Name: HP Pavilion 15-e008tu Notebook PC

Hello prem23,
What did the F5 key do before? According to your manual in the Action Keys list (page 32-33), that key wasn't tied to anything unless its just for page refresh.
If a Windows update breaks something, the best way I know to correct the problem is to uninstall that update.
OR
You can revert Windows back to an earlier state before the update with a Restore Point provided you didn't turn off that feature. If for some reason it is turned off, you will not be able to revert to that point as one was not created.
After the restore, only install one windows update at a time until you find the culprit and uninstall it. This way you have the other updates installed. YES this can be a long process.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03327545&cc=us&dlc=en&lc=en

Battery not installed after update

Similar Messages

Maybe you are looking for