Battery not working after Apple software EFI firmware updated

Hi, My Macbook Pro (C2D 15inch 2.5GHZ) battery stop functioning after I applied Apple software EFI firmware update.
I'm using Newtech NuPower® (High Capacity) branded battery.
Problems after applied EFI update;
- Battery not charging
- Indication dispalays 0%
Anyone having a same issue?

OWC responsed tonight that they will replace my battery.

Similar Messages

  • Port Forwarding not working after 7.7.1 Firmware update

    I bought the new 6th generation Airport Extreme today, and after I set it up, everything worked great.  I have a VoIP phone that needs to have traffic on port 5060 forwarded to it, and that worked just fine as well. 
    However, I then updated to the 7.7.1 firmware, and the port forwarding stopped working.  I tried a hard reset of the Airport and re-entered all the settings, but it still didn't work.  I spent about 30 minutes on the phone with 2 Apple support people who tried hard, but couldn't help.  They also couldn't find a way to download the 7.7 firmware, so there was no way to downgrade.  They suggested I go back to the store and exchange it for another one, which I did, and now it all works again.
    Has anyone else had issues with port forwarding on 7.7.1?  I'm just wondering how I'll ever be able to update the firmware, since failure means having to get a new Airport.

    Huh,
    turns out the problem went away with another restart of the Mac Mini. I'm still uneasy about it though, as I do not understand how it went from working to not-working over night in the first place. But, at least for now, the problem seems gone.
    Thanks for commenting.
    Cheers
                Niels Olof

  • HT202664 my iphoto is under an old apple ID, how do I upgrade using my current ID? The current Iphoto is not working after the software upgrade. If I delete the iphoto app will i lose my photo library?

    I have a MacBook pro I recently upgraded to OSX. iPhoto is now not working as it was purchased under an old apple ID and I cant find a way to use my current ID to upgrade it. Also if I delete iPhoto to then repurchase it, will I lose my photo library?

    1. iPhoto won’t run any differently based on the Apple ID it’s associated with, but can only be updated from that one.
    2. No. Back it up anyway.
    (117179)

  • IDVD & Roxio Toast not working after APPLE-SA-2009-02-12 Security Update

    After installing APPLE-SA-2009-02-12 Security Update 2009-001, iDVD and Roxio Toast will not work.
    iDVD will launch, and I can create a project. It starts to render the video, but crashes before it starts to burn the disc.
    Roxio Toast will not even launch.
    Both applications were working perfectly and reliably before this update.
    Anyone else found this problem?
    Greg.

    I re-installed the apps, and they're working now.
    Greg.

  • AIRPLAY not working after Apple tv 6.0.2 update!!!

    After the apple tv 6.0.2 update airplay isn't working properly. I have reset and restarted my apple tv, reset the wireless network and it keeps disconnecting. Homesharing will not connect even after logging in and signing out on iTunes. Does anyone know how to fix this problem? Frustrated!!!

    Ive checked the network and it's working fine.
    You are getting disconnected so clearly it is not.  Lets try to work in reality here.  The fact that you are connected does not count as checking your network.  The fact that there is a conneciton does not tell you anything about the quality of that connection.  Even more so with WiFi since there are so many more things that can cause problems with it.  And since AirPlay is in real time and not cached it has no tolerance for any interference or dropped packets.
    I see a number of post about this same issue
    Yes, several posts on the forum....   out of a user base in the tens of millions.  If there where really an issue with the update (which went out weeks ago) the forum would be flooded.  Every time there is an update released a handful of people have some problem that occurs not long after and they all sure it must be the update even though 99% of the user base is not having the same issue.
    so I guess everyone is having Wifi and connection issues then.
    Most of them yes.  70% of the posts are WiFi related issues.  As I already explained streaming video rarely works well over WiFi.  Even more so for HD video, and even more so still for AirPlay which is hyper sensitive to any hiccups at all.  WiFi makes this a very failure prone way to use ATV and as such most of the posts are related WiFi.
    I dont think so !!!!
    Since you don't think losing your device connections is a network problem clearly thinking is not your strong suit.

  • Apps not working after Apple ID updated

    Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
    All apps working fine after installed OSX Mavericks, before Apple ID updated.

    Contact, Calendar, Reminder, Maps, App Store, Textedit, etc... bounce but not open after clicked.
    All apps working fine after installed OSX Mavericks, before Apple ID updated.

  • My iphone display is not working after apple logo. But the touch screen works fine.

    My Iphone 4S Was fully submerged in water, it has not worked for weeks but i plugged it in to the charger today and it worked started up, charged fine the apple logo appeared and then it just stayed black, I managed to type my passcode in without seeing the screen and it unlocked fine. Im now restoring it with itunes and hopefully it helps.

    You probably still have warranty. Just go back to your carrier and tell them that your phone suddenly stopped working and they will most likely end up giving you a new/fixed iphone.
    Good Luck!

  • Airport not working after Apple sw updates - HELP PLEASE!!!

    I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see network broadcasting as its sen in networks box, yet when I select it and then plug in a WEP and connect it says no can do and jumps back to no network selected. Ive tried this dzens and dozens of times. Lke I said was fine for last 9 months until updates last week...grrrhh.can anyon help me please?
    thanks
    ./david
    PS ot sure what OS I have..never checked to be honest
    INTEL iMAC   Mac OS X (10.4.8)  

    Hi David,
    sunny in Scotland right now ?? (Sorry, just joking)
    Have the same one and came to the conclusion that Airport doesn't wait for the DHCP from the Netgear to get a numer like 192.168.xxx.xxx but has already one which is not in the pool provided by the Netgear.
    Since I'm depending on this I help myself by turning Airport off (in the Menu) wait 20 seconds and then turn it on again.
    Helps every time.
    Another guy round here has helped himself by turning off the Automatic (in the Airport preferences) and has entered all numbers manually.
    Regards
    Stefan

  • Car kit microphone not working after nokia softwar...

    I have a Nokia 5800 Express Music. It was working perfect in my car Bluetooth system. Recently I updated my software version to 60.0.003.  Now the microphone is not working while using the car Bluetooth system.  I can hear the caller voice but they can’t listen what I say.  All other phones are still working perfect with Bluetooth System. Therefore I think some bug is there with this software update. I tried changing Accessories settings to Headset, Wireless Car Kit etc., but still the problem exist.
    Please me to find some way to make the mic working or else help me to downgrade my phone software to earlier version.

    please somebody help.......

  • Javascripts for gallery images and movies do not work after Apple updates?

    The javascript that opens image links and movies no longer appears to work after runing recent Apple updates. (OSX 10.4.7 and Safari 2.0.4) The pages still work fine in Firefox under 10.4.7 and also in older versions of the OS (10.4.6) and Safari (2.0.3), but nothing happens anymore when clicking on these using Safari on my recently-updated MBP. Has anyone else experienced this?

    No problem here.

  • My apple lightning charger is not working after the ios 8.2 update.

    Since the update, my brand new iPhone 6 won't work with apple lightning charger cables. Anyone else having this issue?

    Hi mmclain123,
    If you're having issues with charging your iPhone, then I'd like you to please follow the steps in the article linked to below.
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

  • Sound not working after 10.9.4 Mavericks Update - HELP!

    My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Before anyone asks, no its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
    I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
    Any help is greatly appreciated!

    So I had the same problem; Actually other problems occurred after upgrade 10.9.2 (Thunderbolt related issues) and now after upgrading to 10.9.4 my internal sound disappeared.
    The solutions described above made it worse; Sorry sykosoft .. but your solutions is even dangerous ;
    I spend almost a Day finding out how to restore my internal audio devices ..
    So what I discovered, this is a software issue;
    Update on update on update without any clean install resulted in some filty .plist files
    com.apple.audio.DevicesSettings.plist
    com.apple.audio.SystemSettings.plist
    looking in those files  I discovered some settings pointing towards RabbitEars .. perhaps I tried it once in a previous life but now I do believe the upgrade took by incident the wrong 'device' as standard ..
    So I looked up and the only thing I could do was finding .kext and other related stuff .. only able to remove it commando wise = terminal
    after rebooting for the 722th time performing a SMC and PRAM for the 666th time the result was ... NO STANDARD devices detected
    THe only solution working is :
    A recovery install;
    https://www.apple.com/osx/recovery/
    In my case I encountered a problem; My recovery failed (reboot press and hold CMD+R, selecting install fresh OS X)
    I find out it was due to my FileVault encrypted HD; So first I uncrypted  (switched off FileVault) my HD, and even created a USB recovery disk (not needed)
    Tadaaaa 45 minutes later all problems solved, without loosing data or reinstalling all programs ..
    *feeling relieved* I thought sharing my pain and solution would save you hours finding out how to repair, hoping PRAM and SMC reset would solve it ..

  • Facetime, iMessage, and Mail not working after iOS 6.1.3 update

    I've had my iPod touch 4th generation since Oct 2010 and never updated the iOS until very recently. Before the update, Facetime worked consistently and easily. After I finally got around to updating my iOS a week ago, my iPod has come into severe issues.
    99% of the time, I cannot send or receive Facetime calls. If I try to make a call, it doesn't make the dial tone and eventually it just says "Connection Lost". Nothing happens if someone is trying to send me a call. I only Facetime with my boyfriend and his iPod hasn't changed since Facetime was last working. HIs other iPod is also updated with iOS 6.1.3.
    I never used iMessage before the iOS update, but because it says on Apple support that it uses push notifications like Facetime does, so I tried it. Most of the time, I cannot send or receive messages. I rarely used Mail before the update, but I never had a problem with it. Now, when I enter my gmail password, it keeps saying my username and password are not correct, even though I haven't changed my credentials.
    I only use my iPod for Facetime, iTunes, and Pandora. I don't need iMessage or Mail, but I am testing with those to see if this can help find the root cause of the problem. Pandora works smoothly so I know it's not a wifi connection issue. I have searched for remedies on end and tried:
    1.  Reset, turn off/restart, turn Facetime on and off, etc.
    2. Changing the DNS server address to 8.8.8.8, which made Facetime work normally for one time and never again
    3. Updating my Apple ID password online, then signing out and signing back in
    4. Creating another Apple ID with my other gmail account. Maybe 1 out of 10 Facetime call attempts, I can generate the dial tone, but when my boyfriend clicks to receive the call, it says that I am unavailable. iMessage has about the same success rate. It seems when I miraculously can send or receive texts through iMessage, I can manage to get the dial tone when I try Facetime, though the call cannot go through.
    This is of course extremely frustrating and I highly regret the update now. I was hoping for an improved iPod after the update, and now I have a near-dud! I did make sure to check my location and date and time, and both are correct (US, Central time). Any help would be greatly appreciated. Thank you.

    I spoke too soon. I tried Facetime again last night and had the same problems. Another factory reset did not work. I think it may be time to just call Apple support.

  • Lighting cables and adapters are not working after the last iOS 7 update.

    Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
    I have an iPhone 5 funning iOS 7.0.2.
    I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
    I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

    I had the same bug. Powering off the phone and back on resolved the issue

  • Mac mail not working after OS 10.9.5 update

    I have the same problem as other users.
    Since last update of the OS to 10.9.5, the MAIL app does not send email.
    It just does a few times a day, on and off.
    I tried to take all accounts offline and then take all accounts online again, so many times, does not work.
    I tried to reboot; does not work.
    I tried deleting my accounts and creating them again, does not work.
    I started to like that app, makes me sad to see how bad it got this week.
    Does anyone know what is going on??
    MacBook Air, OS X Mavericks (10.9.5)
    HELP!
    Re: Mail app drives me crazy, does not sync since last update 10.9.5

    On and Off, that's the reason I am 100% convinced it is a software update issue.
    It seems that Mail does not connect to servers as it used to.
    Sometimes it would work great for a while, and turn back down again for no reason.
    Apple will not read those comments as it is a place for mac users only. The only thing we can do is send 1 email per day, that's what i am doing, to "Provide Mail Feedback" in Mail on the bar to complain so they hear about the problem and try to solve it.
    Any mac user of the community could help, apart from saying just do not use this app anymore?

Maybe you are looking for