Battery Pack for NOMAD Jukebox Zen 2

Does anybody know where I can buy a battery pack? Info on battery: 3.6V Lithium Ion, Creative PN BA20203R60800. I tried all the sites I can find on the web and emailed a couple of distributors with no luck. Thanks in advance.

Yes, I tried Creative online a few times. I even emailed them and all I receive was a toll free phone number.

Similar Messages

Driver for Nomad Jukebox Zen Xtra

! I've tried and tried and tried again and can't figure out how to get it.. Sorry, but I am not that computer literate.
I have an old 30G Jukebox that I love. (I also have two other Zen, 8G and 6G)
I want to d/l some new songs.
Anybody out there that can help me?
I have a brand-new HP with Vista.
Thanks for any help
Eddie

Fi'veO wrote:
I've tried and tried and tried again and can't figure out how to get it.. Sorry, but I am not that computer literate.
I have an old 30G Jukebox that I love. (I also have two other Zen, 8G and 6G)
I want to d/l some new songs.
Anybody out there that can help me?
I have a brand-new HP with Vista.
Thanks for any help
Eddie
If the 8 & 6 Gb are the new "Zen" those don't need you to install anything those work with WMP on Vista (the driver for those is nati've to the O.S.) the place to find all the software is here http://support.creative.com/Products...me=MP3+Players As for the Xtra this link will tell you how to get that one working on a Vista O.S. http://mrinternet.wordpress.com/2007...ether-finally/

NAPSTER support for NOMAD Jukebox Zen Xtra 3

Hi... Just purchased the Jukebox under the misguided assumption that it worked with NAPSTER. Turns out I was wrong. When do you (Creative) anticipate that you will have a firmware update enabling use with NAPSTER? I hyave to make a decision whether to take back to the store (and maybe go with the IPOD and eat the extra cost) or hold on to if it makes sense because the upgrade is coming soon. many thanks...

Nobody knows for sure, and Creative won't give a definiti've date. One Creative rep has said it will probably be after Q2 (June) and Napster are suggesting it will be soon.

Repair for Nomad Jukebox Zen Xt

It's out of warranty, they've been discontinued... should I give up hope of salvaging it and buy a new mp3 player? I love this little machine and would like to hang on to it if at all possible.
(It unfortunately got orange juice spilled on it, dried out and worked breifly, and then the next day gave up the ghost)
I've contemplated taking it apart and seeing if the insides look beyond repair but was advised it's better to see if I can send it in to get it fixed first.
Thanks in advance for the help!
In hope,
Katie?

By the way, was the player's lid open when you spilled the juice ? You see the probability of circuit malfuncation due to a minor spill is very low when the player is completely covered. You should consult a professional before you take matters in your own hands.
And if indeed it is a circuit short-circuit, then it's a minor problem which could be solved by drying up the printed circuit board with the help of a air-blower.
p.s.- remove the battery and don't use it with the player till matters are sorted out..

Driver for Nomad Jukebox Zen Xtra 40GB

Before going too far, I have read the FAQ. I did try to go to Support / Downloads to try to find a driver update for my player, but got error 403, Forbidden.
How do I get into this download area? Is the Creative Media Player interface also in this download area?
Is driver 2.0.00 the one I need? (from another forum post)
Thanks,
Austin TX

threehourzsleep wrote:
Before going too far, I have read the FAQ. I did try to go to Support / Downloads to try to find a driver update for my player, but got error 403, Forbidden.
How do I get into this download area? Is the Creative Media Player interface also in this download area?
Is driver 2.0.00 the one I need? (from another forum post)
Thanks,
Austin TX
Yes that is the correct driver if your device as the old firmware. You must install the driver using compatiblity mode(right-click file choose properties>compatiblity>XP SP2) to install on a Vista computer for a device that has the old or original firmware. The program will hang at say 50% after a few minutes close the program(you may have close it using Task Manager) reboot the computer & them plug in device so Windows can load the driver & install the device. Here is the driver ? http://support.creative.com/Products...me=MP3+Players

Is Recovery Tool good for Nomad Jukebox Zen Xtra?

Computer OS is XP Pro
Email support was useless. They gave me three different answers!

Customer support says NO it's not.

Player Instructions for Nomad Jukebox Zen Xtra

I have an older 60 gig player and I have downloaded the latest firmware and software. I can see there are multiple playlists. I can see a menu on the actual player and can scroll down but I cannot select any playlists. When I hit the play button it always goes to the same selected playlist. I cannot find any paper manual or manuals online on a "how to" use the Menu on the actual player. I must have lost the directions somewhere. HELP!!!

Hi,
Please press the scroller to select the playlist.
The manual is available in the download section.

Nomad jukebox zen (5 years old) battery

' The battery of my nomad jukebox zen is exhausted. Where can I found it's the creative part number is BA20203R60800.
other indicati've numbers : 240AE28CHMI
LP083467ARP
Thanks.
PS My country is ITALIA

peppecirillo wrote:
' The battery of my nomad jukebox zen is exhausted. Where can I found it's the creative part number is BA20203R60800.
other indicati've numbers : 240AE28CHMI
LP083467ARP
Thanks.
PS My country is ITALIA
Search Ebay

Nomad Jukebox Zen Xtra - Battery 3.6v vs. 3

Hey all - I'm looking to purchase a replacement battery for my 30g Nomad Jukebox Zen Xtra and I've found some cheap ones from ebay (such as this one). The question I have is this: my stock battery is 3.6v but this replacement (which has the same parts number) is rated at 3.7v - is this a problem? Will this damage my player?
Please let me know what issues this may cause and what successes/failures people have had with replacement batteries.
Thanks in advance!!!
Dale

I found the following discussion on PowerStream.com :
<A target=_blank><B>Q: What is the difference between the 3.6 volt and the 3.7 volt lithium-ion and lithium-polymer cells?</B>[/url]A. This quesiton has been on my mind for a few months. There is a lot of folklore out there about this. It confused me for two reasons. Firstly, I have never heard of a higher charge voltage for some cells and not others. Secondly, the 3.6 is just a rule-of-thumb average of the battery voltage anyway . The actual voltage varies between 4.2 volts and 3 (or 2.8) volts during the discharge. It doesn't have one voltage. You can't just put a meter on a cell and say "this one is a 3.6 volt cell" or "this one is a 3.7 volt cell."So I asked a friend who has a PhD in battery chemistry and has been designing, testing, and manufacturing lithium ion and li-poly cells for over 5 years. Here is his answer:<I>There is no difference between 3.6V and 3.7V cells. The reasons why people say 3.6V in one case and 3.7V in other cases are due to discharge rate. If you discharge your lithium ion cells with 0.2C rate, the middle point voltage of the cells is 3.7V. If you discharge your lithium ion cells with 2C rate, the middle point voltage of the cells is 3.6V or even lower. The middle point voltage of a lithium ion cells, including Polymer Lithium ion Cells, is between 3.6V and 3.7V, variable upon discharging rate.</I>In other words, it is mostly marketing hype. Now the modern cells tend to keep their voltage higher during discharge than the old ones, so a marketing person could easily say "this makes the average higher, so let's call it a 3.7 volt cell."But why stop there? Why not rate the voltage as the peak voltage and get the jump on everybody? "It's a 4.2 volt cell, demand nothing less!"So don't get caught up with the hype when selecting a batteryMessage Edited by RobertoV05 on 0--2006 2:37 AM

Nomad jukebox zen xtra driver for use with Vista 32 b

Hi,
I just registered in an attempt to find a solution to using my Nomad Jukebox Zen Xtra player with Windows Vista 32 bit operating system. Unfortunately, my old computer died and all was lost so when I purchased a new computer I naturally went with the most recent operating system, it never occured to me that my wonderful MP3 player would be considered obsolete (my various printers are all much older than my mp3 player and they all work just fine, my multiple?digital cameras too) anyway, I am running around in circles and I would not consider myself highly technical. I cannot download the latest creative firmware because without a driver my device is not recognized, and thus, creative will not complete the download since my device is not recognized...... when I go to microsoft to look for "nati've drivers" as suggested by Creative somewhere in the maze I have been stumbling through, the link I found in a search on Microsoft's website sends me to a creative labs link that...interestingly....no longer exists.... I sent an email to customer support, but they happily sent me a form letter stating that my warranty is out of date so they have no assistance to offer unless I pay for a half hour of their time in advance, and I find it odd that I should pay money to risk being told that they have chosen not to support this device, because if I pay money to hear that I will immediately hate this company, and I don't want to throw in the towel just yet, anyway, another option stated in the form letter was to use this forum, so I am trying really hard to state the circumstances of my dilemma in a fair and open way. It seems to me that with all the energy that was put into that form letter, they could have written a letter that would address this issue directly as I cannot fathome that I am the only one with this problem. So, per the suggestion of the form letter, I am here to ask if anyone knows of a solution to making a Nomad Jukebox Zen Xtra work with Windows Vista 32 bit operating system.....if there is none, then at least I will hear about it without paying Creative money to tell me so. If I should post my request to a different thread/topic area?on the forum, that information would be greatly appreciated too as I have never used a forum before and alot of the information on this site is more technical than I am used to. Thank you to anyone that can offer some guidance or a clear solution. Signed by a baffled Creative customer....Dani

Try reading this thread. I had the same problem and the solution worked for me. http://forums.creative.com/creativel...a&message.id=7?

Nomad Jukebox Zen Xtra stops working with XP following Windows Media Player 11 Beta Installat

Yesterday I was very pleased to find that my Creative Zen Xtra (model DAP-HD00) portable media player is a PlaysForSure capable device. Creative Labs, on November 9, 2005, released the Creative Zen Xtra PlaysForSure Firmware v2.0.03. I installed this firmware (I had to install the Creative ZenJukebox Driver v.30.03 first to get Windows to recognize the device). Once the firmware was upgraded, Windows began recognizing the Zen Xtra as a MTP device and life was good. I was able to synchronize it with both Napster To Go and Windows Media Player 0.
After this, I went ahead and installed Windows Media Player Beta, which I just downloaded yesterday as well.
From a functional standpoint, WMP seems to run just fine. However, when I connected the Creative Zen Xtra (with its PlaysForSure firmware), Windows redetected the hardware. It first showed "Creative Jukebox Zen Xtra" in the tooltip, followed by "MTP Device" in the new hardware tooltip. Finally, Windows announced that there was a problem installing my new hardware and that it may not work properly.
Sure enough, when I went into Device Manager, my Zen Xtra was showing as an MTP Device with an exclamation point on it. More specifically, it specified the status of, "This device cannot start (Code 0)."
Prior to the installation of Windows Media Player, the Creative Zen Xtra showed in device manager with the following characteristics under the heading "Windows Portable Devices":
Name: NOMAD Jukebox Zen XtraDriver Version: 5.2.0.0 dated 8/30/2004Digitally Signed by Microsoft Windows Component Publisher
Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.3802.3802 built by dnsrv(bld4act)
Windows Media Player changed this to the following (the device now shows up under "Portable Devices"):
Name: MTP DeviceDriver Version: 5.2.5326.4762 dated 2/22/2006Digitally Signed by Microsoft Windows Component Publisher
Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.5358.4827 (WMP_.060509-2009)C:\Windows\system32\DRIVERS\wudfrd.sys - v6.0.5348.0(winmain(wmbla).0604-339)
The file wudfrd.sys is NOT digitally signed in this case.
As of now, my Zen Xtra is completely unusable on this system, and I need to sync it with my laptop for the time being, which still has WMP 0 installed on it.
Is this a bug with WMP beta? Is it a problem with my firmware? Since this is PlaysForSure compliant firmware, and it worked flawlessly with Napster and WMP 0 (before the MTP driver was updated), it would seem to be a WMP beta issue. I'd like to hear more official confirmation on the subject, however.
Some general details about my system are:
Microsoft Windows XP Professional with Service Pack 2Verified GENUINE Microsoft operating system using Genuine Advantage ValidationIntel Pentium 4 CPU 3.2 GHz, Hyper-Threaded processor2.00 GB RAM
Windows Media Player Version: .0.5358.4827Napster Version: 3.6.0.7 (US)
Any recommendations? Fixes? Some have suggested rolling back the WMP installation, but I would like to consider this option only as an absolute last resort.
Best regards,Matt

Ok, this worked out accidentally - but happily
I first installed the driver - not the media source - but the driver for the device.
After that the windows device manager yellow sign disappeared - apparently the device driver was registered by windows.
Then I Installed Mediasource 5 - the installation went thru fine.
Does anyone have any recommended updates to install, please also advise what benefits.
Thanks.

Nomad Jukebox Zen Xtra connection probl

Hello Everyone.
First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

Hibbs,
Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

Nomad Jukebox Zen Xtra VS Winows Media Player - Help?

I have a 40gig Nomad Jukebox Zen Xtra - a computer crash a year ago resulted in a replacement by the computer company - and it came with Windows Media Player.... when I tried to run it and had already installed the Creative software/Music library - Media Player crashed my computer every time - had to uninstal...,. now - that computer is defecti've and has just been replaced again by the maker - and before I load the Creatai've Software wondered if this is what is interfering with Media Player? Does anyone know? When I buy music it looks for Windows Media Player I believe - and I can play it and transfer the music in Creative program - BUT - it no longer lists my music library as single songs but as folders - and I have to go specifically into a remote folder to try to find the downloaded music and transfer to the Nomad....
Any help is appreciated..... I'm lost!
Thanks
KB

The firmware update only works on a windows XP machine.
you also need to have Windows media player 0 installed
you must not have windows media player or windows media player runtime lurking in your windows XP add/remove programmes bit on the control panel.
if you do have WMP first remove it ( roll back) then re-boot, then remove windows media player runtime ( rioll back) and re-boot.
open windows media player, if it is windows media player 0 then you should be OK, if its windows media player 9 you need ot download and install windows media player 0.
Check again to make sure that windows media player and windows media player runtime are not in the add/rmove programs.
Back up everything on the player, all music, playlists and data files.
update the firmware.
if it stalls part way, like it did for me the last time i updated a Zen Xtra ( last weekend -installing a new motherboard ) dont panic.
it will go to rescue mode, close the firmware update, the player will go to rescue mode, then re-satart the update, on the zen xtra, slect re-load OS then on the firmware update click on English. then slect re-load os on the player.
make sure that the player is fully charged, and that the mains charger is also attached.
just out of interest, when you remove the front panel on your zen xtra to get to the battery, does the headphone jack ( visable through a hole in the top right) have a blob of red paint on

Nomad jukebox zen xtra firrmware version 1.03

i own a nomad jukebox zen xtra 30gb which has been running in excellent condition for three years..i want to make a database of all driver and firmware versions on my pc..
i've tried locating this firmware version(.03.02)?everywhere(creative downloads page included)..but haven't met with success..i would appreciate if anyone would tell me where to look for it..thanks in advance

First you must install the driver http://support.creative.com/Products...me=MP3+Players on the computer. Have a battery that is charged. What you did is you erased the firmware(reload O.S.)so the player has none. That is why you got the message you got. You are going to lose all the files(music) on the player because when you install the firmware? you are going to format the dri've before you do that.
Download & install the driver first. The version 2.0.00 driver Then check to see if player is recognized(plug it into a rear usb port if using a desktop NO USB HUBS) Download the firmware file to your desktop on the computer
<div class="DownloadBriefBox"><div class="DownloadNameBox">http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=28757&view=by_date_ ascending&page= <span class="DownloadSizeBox">

Nomad Jukebox Zen Xtra Firmware Update Issue

My player does not get recognized after attempting to update firmware (ZenXtraP4SAudible_PCFW_LB_2_0_03.exe) according to website instructions.
When turned on the player displays "Firmware Problem" for a fraction of a second, then it goes into Rescue Mode v., Boot v.4, HW v0.0., 4 items in the menu ( Clean Up; 2 Format All; 3 Reload OS; 4 Reboot)
This is my setup:
Kernel version: Microsoft Windows XP, Multiprocessor Free
Product type: Professional
Product version: 5.
Service pack: 3
Kernel build number: 2600
IE version: 8.0000
System root: C:\WINDOWS
Processors: 2
Processor speed: 2.6 GHz
Processor type: AMD Athlon(tm) 7750 Dual-Core Processor
Physical memory: 3072 MB
Video driver: ATI Radeon HD 4800 Series
Relevant Applications:
Creative Jukebox Driver
Creative MediaSource
Creative NOMAD Jukebox Zen Xtra
Windows Media Format Runtime
Windows Media Player 0
Please advise, thanks in advance,

Problem solved!
I did not follow the link you provided, thanks for the suggestion anyway. I read in another post that you advised to disable the device in Device Manager, although I took a different route. This is what I did after enabling Mediasource DETECTOR
. Completely uninstall Windows Media Player , revert to WMP 0, inlcuding the Runtime
2. Reboot the PC
2. Once rebooted connect the player to the PC
3. right click MY COMPUTER->MANAGE->DEVICE MANAGER
4. Under Windows Portable Devices right click NOMAD JUKEBOX ZEN XTRA, then select Update Drivers
5. Navigate to "C:\Program Files\Creative\Jukebox 3 Drivers" to select the driver, OK all the windows
6. Run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe with the player connected
7. I was prompted if I wanted to replace the Firmware with the same version (2.0.03) I said yes... within seconds the player came back to normal.
I hope that the above can help people in my same situation. The culprit seems to be WMP and all the hidden software installed with it. Freakin Microsoft!
Final question. Now that the firmware has been updated, am I safe by installing WMP ?
Thanks!

Battery Pack for NOMAD Jukebox Zen 2

Similar Messages

Maybe you are looking for