Battery ran out, stuck in reboot and won't charge

Hi -
My 80GB 5G iPod is barely a year old, and not that frequently used. Unfortunately, this morning as I went to sync it, I received the "very low battery" message when plugging in the USB, and right after, the iPod seemed to freeze up (PC/iTunes never recognized it being connected). I unplugged it and plugged it in to the wall power adapter, thinking it would charge that way. However, it's now stuck in reboot. I've tried to reset it it numerous times, but it goes right back in to reboot mode! What can I do?
Haven't been able to find any solutions anywhere to this - any help would be greatly appreciated!
Thanks.

I was finally able to get the iPod into disk mode (whether it was the fact that I left it connected to the wall charger for a while, or I was just more patient while holding down select + play/pause, I don't know!) and am now able to connect it to the PC again to sync and charge.

Similar Messages

My ipod 4g is stuck at the battery with a lightning bolt underneath and won't charge

My iPod died about a month ago, and I waiting. I tried charging it with almost everything I could. I plugged it into the wall, computer, etc..
To make this easier, my iPod is not jailbroken and the home button fell off and I had a feeling it had to do with the orange chip underneath the home button being loose, but that's not what other people who experienced the same thing as me had.
I tried pressing the power button, holding the power button. I can't use the home button since it is broken. I always used Assisitive Touch.
I tried pressing the power button over and over. I left the iPod in each section I charged it at for at least a night, hoping that in the morning it would turn on again.
Because it won't turn on, my iPod won't register in itunes so I can't restore it or recover it in any way that I know of without using itunes or the home button.
I eventually gave up on it and recently came back to my iPod, wanting to use it again.
I would really like to know how to fix it.

Place the iPod in recovery mode using one of these programs and then try restoring via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Battery went from 100% to 0% and won't charge :C

Hi guys i need some help.
About 15min ago i was reading an article on a website when the screen 'blinked' it turned off going completly black then turned on again. Then i noticed that it said i had 0% battery but i have my MacBook Pro is plugged in right now, the battery was fully charged and its plugged in?
So.2 problems
1. Battery went from 100% charged to 0% in a matter of seconds WHILE PLUGGED IN.
2. Battery is not charging at all now, just stays at 0%
Is this a common thing? like has this happened to lots of people before and is a known issue?
What info do i need to post up so you guys can more effectively help me? also might need to show me how to get this info.

How old is your Mac?
Open System Info and look at the battery section. If it says Service Battery then take the system to Apple and have it serviced.

My MacBook Air is stuck in iPhoto and won't let me log out it says its downloading pics to the library but it not - can anyone help me to escape out of this?

My MacBook Air is stuck in iPhoto and won't let me log out it says it is downloading pics into the library but it is not - can anyone help me escape out of iPhoto?

Apple menu ==> force quit
Post back if you have trouble after quitting and rebooting your MBA
LN

HT201210 My Ipad battery ran out whilst someone was using it - having recharged it it goes d=straight to Restore mode and when connected to IT Tunes, it says unknown error 28 which makes no sense - ideas please?

My daugter was using our Ipad when the battery ran out. Having recharged it adn trying to swotch back on is immediately dosplays teh sysmbol for pluging into ITunes. When doing so the computer says it must restore the Ipad and update it. When doing so it fails, displaying unknown error 28 - looking at more info, it makes little sense other than a possible hgardware fault. This is on an orignal IPad with 3G and the operating system hasn't been updated for a while. Any ideas please. Mike

My daugter was using our Ipad when the battery ran out. Having recharged it adn trying to swotch back on is immediately dosplays teh sysmbol for pluging into ITunes. When doing so the computer says it must restore the Ipad and update it. When doing so it fails, displaying unknown error 28 - looking at more info, it makes little sense other than a possible hgardware fault. This is on an orignal IPad with 3G and the operating system hasn't been updated for a while. Any ideas please. Mike

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.

My mini mac is stuck in mail and won't close or reboot

My Mini Mac is stuck in mail and won't close, reboot or shut down.Any suggestions?

What happens if you press and hold the Power button?
If you unplug the power cord and then plug it in and try to boot?

My phone was working fine, the battery ran out and the power shut off. now im charging it and it wont come back on?

my phone was working fine, the battery ran out and the power shut off. now im charging it and it wont come back on?

Hold the home and power button down at the same time until you see the apple then let go..

T61 Video driver issue when battery ran out

When battery ran out the display goes back to default. I
need to uninstall & reinstall the Nvidia drivers in order to correct the
issue.
Can you please advise? How to fix it permanently?

elementx, welcome to the forum,
if you could post your type and model number and which OS you have this would be a help. If your model number ends in CTO please provide some details about your T61 i.e. which graphic chip. This would help us to help you.
Which driver are you installing, maybe you could provide a link to it?
If you have a factory installation you could try installing the original driver which can be found in C:\swtools\drivers\video.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My ipod is stuck in reboot and I tried a force restart and im away from my computer. HELP!!

My ipod is stuck in reboot and I tried a force restart and it didnt work. I am away from my computer so no itunes.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
You need a computer with iTunes for most of the above. It is required.

SQL 2012 SP1 - How to determine a query that causes Error 8623 in SQL Log: The query processor ran out of internal resources and could not produce a query plan. This is a rare event...

We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciated

Hi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Trying to check out Annual Adobe Export and won't allow me to go to next step and put in biling info

Trying to check out Annual Adobe Export and won't allow me to go to next step and put in biling info.
Thank you for any assistance you can provide. Amy

Moving this discussion to the Adobe ExportPDF forum.
AmyBebberSmith if you are facing billing difficulties then please contact our support team directly as opposed to posting to the forums. You can contact our support at http://adobe.ly/yxj0t6.

My MacBook Pro battery is empty and won't charge, but charger is fine

My MacBook Pro battery is empty and won't charge. I did the PRAM reset when there was still some power left in the battery. The charger indicator light doesn't come on when I connect it to MacBook Pro, BUT it works just fine with my old white Mac book. This happened a few times before, and unplugging and plugging the adapter into the MacBook pro helped. Now nothing happens no matter how many times I reset the charger. Is there anything else I can do?

More than likely you need a new battery.

First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on t

First, I've read the manual. This new Nano won't sync and won't charge. Itunes does recognize the device. When it's connected to a Windows PC, the battery indictor shows charged. When it's not connected, the indicator shows no charge. I've tried this on two PCS without success.

Maybe the Nano you got is defective. Have it replaced.

HT1338 Iphoto is stuck on import and won't stop. How do I force a stop?

iphoto is stuck on import and won't stop when I click 'stop import'. I forced the photo card to eject and it still won't stop preparing to import. How do I force it to stop since there seems to be a problem.

Force Quit is under the Apple Menu
Regards
TD

Battery ran out, stuck in reboot and won't charge

Similar Messages

Maybe you are looking for