Battery Recall (Need Serious Help)

Hi all,
I have a Black Macbook (July 06).
My battery for the last 3 weeks has been horrid. My computer lasts a total of 1.5 hours under min. brightness and no serious workload. And the worst part is, it just shuts off, doesn't sleep when it gets low. Just totally turns off.
Now my cycle count is at 299 and I have no idea what to do with this thing. I took it out of my computer because I honestly believe I deserve a replacement.
So I called my local service center here in Lebanon (middle east) and this is what they told me.
Since I purchased my Macbook from Canada (I had to move to Lebanon in August 06) they cannnot, and will not replace my battery for me. Even if I requested to pay the shipping charges.
Is there any help for me? I feel they are shafting me because they've done this with my iBook which had the recall battery fire issue. And another iBook which had a manufacturer defect. In anycase, those I fixed when I went back to Canada. But I can't keep these 299 cycles forever! Can someone seriously help me here?

I know, I was hoping someone could point me in the right direction.
Maybe you know of an email where I can send my complaint? Because all I can find are 1800 numbers that don't connect when dialing internationally.

Similar Messages

Need serious help over here...

Hi guys...need serious help...I am using nokia lumia 710 for the past 3months...today i tried to reset my phone,but after resetting my phone dint restart...it keeps on rebboting after the WINDOWS PHONE screen apears...So i need some help...i tried pressing power on,camera and volume up and down button to reset again...but nothing happening...if i charge the phone it does the same...plz help me

Did you try removing the Battery for a couple of minutes, insert back and see if it makes any difference ? If no change then you need to visit Nokia Care

I lost all email 6months and older in mac mail. Need Serious Help!

I lost all email 6 months and older in mac mail. In my in-box as a well as all other folders I created. I expected that the mac email software would keep all email as it did for me in when I used to use Outlook. As well I thought I was covered with the Time Machine I have installed. Well.....The Time Machine that I was aggressively encouraged to buy apparently doesn't back up email. If it does, I must need some secret decoder ring to unlock where it is. I need serious help. I lost months of professional and personal data. I need to fix this immediately and find some way to get my email back. Please help.

In March when I upgraded to Lion and iCloud I also experienced a similar problem (cluster of problems) which was solved by a password reset (conforming to new requirements) for my Apple ID. I'm glad to see that many nice people contributed and your primary problem is fixed. My comment is on your Quicken problem.
Your data inside Quicken 2004 is on borrowed time. In the process of researching personal budgeting apps I found many reports on the web that indicate Intuit as a company is scaling down Quicken (desktop) development and its future attention to the Mac platform will be minimal.
Did you know that Intuit is behind Mint.com? You may be hesitant to put your financial data "in the cloud" and I may be being sheepish, but.. bbaaaa, bbaaaaa, the cloud is where it's going. I know first-hand want a pain in the arse it is to customize an app to your liking. I spent several hours on Mint.com setting up categories and tagging transactions. It's tedious. I didn't look because I wasn't a Quicken user, but perhaps Intuit was nice enough to provide a data conversion path for Mint.com. It is worth a look.
My second suggestion is to scour the web for a hack solution. You can't be the only person who is facing this problem. Quicken was very popular. I just bet someone has posted directions or some code for exporting the Quicken 2004 data and manipulating it for something else.
Good Luck.
Ellee H.

Cold boot problem with X-FI Fata1ty card... Need serious help!

Hey guys:
I just finished upgrading my computer. Realized that I have a cold boot problem. In order to identify the source of problem. I began the following test.
. Remove everything except, cpu, heatsink, ram, video card. Tried to boot with those devices. => No cold boot problem.
2. Install the rest of the ram sticks (I have 4 x 52 in total). => No cold boot problem.
3. Install the other video card (my setup is 7900gtx in SLI) => No cold boot problem.
4. Install the Creative X-FI Fataty card. => COLD BOOT PROBLEM
Once the computer is shut down via the front power switch on the case, the computer will not boot again. To boot the computer, I need to switch off the main power switch on the back of the psu and switch it back on; then turn on the computer via the front power switch on the case. I tried the problem with and without the sound card. Whenever the sound card is installed. There is the problem. If there is no that sound card in my rig, then there won't be any cold-boot problem.
My rig specs:
DFI Lanparty nF4 SLI-DR Venus
AMD Opteron 65 CCBE 609 - Stock speed
4 x 52 MB G.Skill Samsung TCCD LE 2.85V DDR 400
CPU Cooling - Tuniq tower 20
2 x EVGA 7900 GTX Stock - SLI
3 x WD Raptor 74G RAID-0 SATA (-3) 0000 rpm (System)
x Seagate Barracuda 7200.7 60Gb 7200RPM NCQ SATA - 4 (Backup)
Pioneer Black DVR 0 DVD+/-RW - IDE /0
Lian-li PC-V 200B Plus-2 with little case mod
OCZ GameXstream 600W
Creative Fatalty Sound Card w/ Front Panel
Logitech Z5500 5. speakers
I need serious help. This problem is so annoying.
Tnanks and will greatly appreciate it.Message Edited by White_Hair on 0-27-200605:4 PM

The onboard sound is disabled. Unfortunately I sold the Seasonic PSU to my friend. The OCZ GameXStream is suppose to be the higher grade psu than Seasonic PSU. Also, the cold boot problem only exists if the sound card is plugged to the motherboard. I tried change different pci slot. It doesn't seem to help the problem. Thanks for the reply Message Edited by White_Hair on 2-02-200606:07 AM

I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

I need serious help please.. We do translations of schoolbooks, I looked for an over-type function but were unable to find, we are working in indesign CS 5. it takes up allot of time to delete text and type in the new language.

Argh that's frustrating! I never noticed that key did not work in InDesign.
A bit of research and it turns out the MS Office has this as an option in their software. But I cannot find an option in InDesign preferences to make this work.
However, somethings are not listed in the shortcuts and preferences and are hidden triggers in InDesign which can be accessed through a script.
I'm not saying it's possible to activate the Insert Key through a script, but it's plausible that it can be activated.
Maybe ask on the scripting forum? InDesign Scripting
I know this may be a possibility as with InDesign's earlier versions of PDF export to interactive documents there previously was no way to export interactive pdfs as single pages if in Spreads.
But the option to toggle this setting was scriptable.

Getting attachments and emails need serious help!!

I am not sure if I am doing this right, but I am trying to receive emails from gmail, and I am having some serious problems. For some reason I get four emails and then I get a null exception. I have been through my code a dozen times and I cannot find the problem. Here is my code:     try{
                    Properties props = new Properties();
                    props.setProperty("mail.pop3.socketFactory.class", SSL_FACTORY);
                    props.setProperty("mail.pop3.port", "995");
                    props.setProperty("mail.pop3.socketFactory.port", "995");
                    Session session = Session.getInstance(props, null);
                    Store store = session.getStore("pop3");
                    store.connect("pop.gmail.com", "jwheat3300", "carrie11");
                    Folder folder = store.getFolder("INBOX");
                    folder.open(Folder.READ_ONLY);
                    int n=folder.getMessageCount();
                    attach = new String[n];
                    String select = "false";
                    String body = "";
                    for(int i=1; i<=n; i++)
                         Message message = folder.getMessage(i);
                         date2 = "3/2/2006";
                         from = message.getFrom()[0];
                         subject = message.getSubject();
                         attach="false";
                         Multipart multipart = (Multipart)message.getContent();
                         int j = multipart.getCount();
                         for(int l=0; l<j; l++)
                              Part part = multipart.getBodyPart(l);
                              disposition = part.getDisposition();
                              System.out.println(disposition);
                              if((disposition !=null) && ((disposition.equalsIgnoreCase(Part.ATTACHMENT) || disposition.equalsIgnoreCase(Part.INLINE))))
                                   MimeBodyPart mbp = (MimeBodyPart)part;
                                   if(mbp.isMimeType("text/plain"))
                                        body = (String)mbp.getContent();
                                        if(body==null)
                                             body="";
                                        bodies.add(new Body(body));
                                   if(mbp.isMimeType("text/html"))
                                        body = "This is an html email. Unable to display HELP";
                                        bodies.add(new Body(body));
                                   if(mbp.isMimeType("application/x-shockwave-flash"))
                                        attach[i] = "true";
                                   System.out.println(part.getContentType());
                              if(disposition == null)
                                   MimeBodyPart mbp = (MimeBodyPart)part;
                                   if(mbp.isMimeType("text/plain"))
                                        body = (String)mbp.getContent();
                                        if(body==null)
                                             body="";
                                        bodies.add(new Body(body));
                                        attach[i] = "false";
                                   if(mbp.isMimeType("text/html"))
                                        body = "This is an html email. Unable to display HELP";
                                        bodies.add(new Body(body));
                                        attach[i] = "false";
                         inmails.add(new Inmail(select, from, subject, date2, attach[i]));
                         table.revalidate();
                    folder.close(false);
                    store.close();
               }catch(Exception t)
                         System.err.println("Exception900: " +t.getMessage());
I get the body fine, and what I am trying to do is when I get all of my information is to put this into the inmails vector and then update my table. That works but I am only gettting four of thirty emails. Also when it comes to attachments do I need to set up a mime type for every possible attachment that will come? I need some serious help!

I guess I am seriously confused then....I tried doing the tutorial from jguru on sun's site and this was how the code was set up. At least I think it is....I pretty much have no idea what I am doing. I mean the code as it stands will get the emails, and by the way this is for an application not for a server or anything. So should I check for it to be just plain text first and then find out if there is a multipart. There is not really any good tutorials that explain what it is I am trying to accomplish. Please help!

I need serious help with my nano!!

So I was running the lastest iPod updater tool from Apple and I hit restore. The line went all the way then it said factory settings have been restored, although both the restore and update buttons were blacked out in the updater tool. The iPod never restarted like its supposed to when you restore it, it just kept on blinking do not disconnect. So I held down menu and the center button to manually restart it. It restarted in black and while blinking do not disconnect. The iPod updater program froze. I went to my computer and it said something like "Removable device" instead of "Andrew's iPod" and I clicked on it and it said it had to be formated. I hit no and then clicked "safely disconnect" and safely disconnected the iPod. I unplugged it and it showed a check mark saying "ok to disconnect". So then I disconnected to cable and it showed some battery ion then shut off. That makes no sense because it had been sharging for hours prior to this. Now when I plug it in it doesn't do anything. Nothing shows up on the iPod and I hit every button and nothing happens. The computer doesn't recognize anything. I need some help big time.

figured it out myself

Need serious help with my Zen Microphoto

My Zen Microphoto controls are messed up. evrytime i try to use the vertical pad it actually forwards me to the next song. When i press back to return to the previous menu, instead of doing that it played music that i did not even select?
I REALLY need some help here!!! Its a new Zen Microphoto bought only for a month....

What did you do to control the senstivity of the touchpad. Do you set it to low or med or high I tried all, it is very upsetting not to be able to master something as simple as this. I love the player I just got it yesterday the sound is beautifull although I accidently had it turn to high when it started to play.
Need a reply
thanks:womanwink:

NEED SERIOUS HELP; BATTERY.

Today I went out and the rain was really really bad and my phone being in my pocket got a bit wet but when I looked at it it was completely gone and dead so I got home and plugged it in and it showed the 'no battery' indication so I put it in rice and put it in the airing cupboard I now have it out and it is no longer showing the no battery but is showing the charging symbol but after about 5-10 minutes it turns back off the LED light comes on and it goes through the same process I really do not no what to do so anyone that has had this problem or knows how to solve it please help me as soon as possible thank you

I know, I was hoping someone could point me in the right direction.
Maybe you know of an email where I can send my complaint? Because all I can find are 1800 numbers that don't connect when dialing internationally.

Need serious help about understanding settings on photoshop for the best quality- please reply is you know a lot about this.

Ideally I'd like to speak to someone from the UK as I feel I can't write out everything I want to say because it's too confusing and it isn't just one question.
I need help with setting photoshop so the images are the best quality on screen and for websites and printing and how I can change that etc I've heard different things and I just need some clarification and advice.
Obviously I'm sure some of you wont want to give personal details out that's fine but I'm generally just in need of some advice, let me know if you can help:)

I don't change any settings. For 1X web images I always use Save for Web. PS remembers which web settings you used the last time. This doesn't effect other files or formats.
Image optimization — Web Fundamentals
Improving Images for Hi-Res Retina Displays
A guide for creating a better retina web - Ivo Mynttinen / User Interface Designer
Serving Hi-Res images only to High Density Displays with PHP
Retina Images
Seriously, you can drive yourself crazy with all this Retina display stuff. I don't see much upside to it except for very special situations.
Nancy O.

Need serious help with JSP + JDBC/Database connection

Hey all,
I have to build an assignment using JSP pages. I am still pretty new and only learning through trial and error. I understand a bit now, and I have managed to get a bit done for it.
I am having the most trouble with a Login Screen. The requirements are that the a form in a webpage has Username/Number and Password, the user clicks Login, and thats about it. The values for the username/number and password NEED to come from the database and I cannot manage to do this. The thing I have done is basically hardcode the values into the SQL statement in the .jsp file. This works, but only for that one user.
I need it so it checks the username/number and password entered by the user, checks the database to see if they are in it, and if so, give access. I seriously am stuck and have no idea on what to do.
I dont even know if I have made these JSP pages correct for starters, I can send them out if someone is willing to look/help.
I have setup 3 other forms required for the assignment and they are reading data from the db and displaying within tables, I need to do this with non-hardcoded values aswell. Im pretty sure I need to use for example 'SELECT .... FROM .... WHERE username= +usrnm' (a variable instead of username="john" , this is hardcoded), I just CANNOT figure out how to go about it.
Its hard to explain through here so I hope I gave enough info. A friend of mine gave some psuedocode i should use to make it, it seems ok to follow, its just I do not know enough to do it. He suggested:
get the username and pass from the env vars
open the db
make an sql (eg SELECT user, pass FROM users WHERE user = envuser)
index.jsp points to login.jsp
login.jsp get the vars you put into index.jsp
opened the db
is the query returns nothing - then the user is wrong
OR if the passwords dont match
- redirect back to index.jsp
if it does match
- set up a session
- redirect to mainmenu.jsp
Anyway, thanks for any help you can give.
-Aaron

Hi,
Try this... it may help you...
mainMenu.jsp
<html>
<body>
<form method="POST" action="login.jsp">
Username: <input type="text" name="cust_no">
<p>
Password: <input type="password" name="password">
<p>
<input type="submit" value="LOGIN">
</form>
</body>
</html>
login.jsp
<%@ page import="java.io.*, java.sql.*"%>
<html>
<body>
<%
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection("jdbc:odbc:rocky");
Statement statement = connection.createStatement();
String query = "SELECT cust_no, password FROM customers WHERE cust_no='";
query += request.getParameter("cust_no") + "' AND password='";
query += request.getParameter("password") + "';";
ResultSet resSum = statement.executeQuery(query);
if (request.getParameter("cust_no").equalsIgnoreCase(resSum.getString("cust_no") && request.getParameter("password").equalsIgnoreCase(resSum.getString("password"))
%>
<h2>You are logged in!</h2>
<%
else
%>
<h2>You better check your username and password!</h2>
<%
}catch (ClassNotFoundException cnfe){
System.err.println(cnfe);
}catch (SQLException ex ){
System.err.println( ex);
}catch (Exception er){
er.printStackTrace();
%>
</body>
</html>
I didn't check the code that I wrote. So you may have to fix some part of it. Also this may not be the best solution, but it will help you to understand the process easily.
The more efficient method is to check whether the result set returned from the database is null or not.... I hope you got the idea... Good luck!
Rajesh

Why did this happen ( I need serious help)

Ok so I was sitting in front of my computer and I was watching a review of the LG Revolution and I received a notification saying ee4 update after I calmed down from all the excitement of an update I proceeded to update my phone so I put it down and let it do what it done so what usually took a couple of minutes two hours finally it restarted and I noticed it was stuck on the eye animation so I left it alone and waited finally it came on then I got force closes left and right then I would force close the apps then it would freeze and reboot and never leave the eye animation and power off and repeat this has been going on for two weeks since the update finally took it inside a store sat and wait two more hours to find that they said we are not trained to handle a problem like this so I never rooted or put any type of rom on this phone I barely used it half the time so why did this happenIM moving and starting college soon and without my phone I have no way to contact my family if I need to so I just need a a explanation and a detailed solution I don't have much time I can't get another phone so IM stuck a brick that reads 12/31/2004 on start up like its in a time warp i seriously need help

Since the stores cannot handle it and you cannot call *611 from your phone, you can call CS from a landline phone and they can walk you through some trouble shooting steps. If this fails to fix it and there is no physical damage to the phone, you can have it replaced with a CPO unit under warranty. I am assuming that you are outside of the 14 day return window when you could have had it replaced with a new one at a Verizon store. I have found CS to be very helpful over the phone in the past.
Dial *611 from your cell phone
or dial (800) 922-0204 from your cell or a landline phone
Monday-Sunday 6am-11pm

I NEED SERIOUS HELP! IPOD EMERGENCY! PLEASE HELP ME.

I CHARGE MY IPOD UNTIL IT SAYS ITS FULLY CHARGED! IM LISTENING TO IT FOR 45 MINTUES. IT SUDDENLY STOPS IN THE MIDDLE OF MY SONG AND SAY PLEASE CONNECT IPOD TO POWER. LOW BATTERY. I REALLY NEED HELP. WHAT DO I DO? PLEASE HELP ME!

PLEASE DO NOT TYPE IN CAPITALS. IT IS HARD TO READ AND CONSIDERED RUDE.
Also, your iPod's battery has most likely died.
Check these out:
Beef Up iPod Battery
Measure iPod’s Battery
Caring for iPod Battery
About iPod Battery
Tips and Tricks for iPod Battery
iPod Battery FAQ
I hope this helps!

Need serious help with quicktime for windows. PLEASE HELP!!! : (

So i had quicktime on my windows program list and have had it since i bought the computer back in 08' well i got it back from a pawn shop after being down on my luck and they wiped everything out. ever since then i have been uploading pics and videos from my digital camera and the pics are fine but alot of the vids that i have put on here cannot be viewed and when i try to watch them i get an error message saying i need the latest version of quicktime. so i have tried uninstalling it after many failed update attemtps and i cannot get it to uninstall i have tried everything imaginable, from windows utility cleanup to removing it in add/remove programs to just deleting the files in the program list folder. Nothing. i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below." and it already has two diffrent paths located in the entry box and i have tried them both and it keeps giving me the same message as i posted above. i am so lost and it dont help that i dont really know a whole lot about computers. i am stuck between a rock and a hard place.any input would be greatly appreciated. thanks!

i get a prompt saying "the feature you are trying to use is on a resource that is unavailable." and then it goes on to say.. "Click ok to try again or enter an alternate path to a folder containing the installation package 'quicktime.msi' in the box below."
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly this time?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Can't get into OSX! Need serious help here!

So I've seen some folks have had this problem but I haven't found a solution in any previous posts about this. Anyway, I have a bootcamped MBP. Everything has worked fine for the past 3 months but today I restarted my computer, booted to Windows, did some stuff there, restarted and booted to OSX. I got to the blue screen and the "Starting OSX" box popped up for a quick second and then dissappeared, leaving me with a pointer and a blank blue screen. I've tried everything I've seen in other posts about this. It does the same thing when I boot in safe mode as well. I booted up in verbose mode and it stops on the login app. I booted to the install disk and reselected the Mac HD to no avail. Windows still boots fine and it boots to disk fine, but refuses to start up OSX. Is there a way to reinstall OSX without losing my 3+ months of data that I've aquired? That would suck so bad to lose everything on my HD. ANY help would be appreciated. Thanks for reading!

Restart with the left Shift key held down and see if you can get to the login window; if you can't, perform an Archive and Install of Mac OS X, which won't delete items you've added to the computer. If you can get to the login window, restart with the Command and S keys held down. Enter the following:
mount -uw /
cd /Users
mv username/ olddata/
exit
Replace username with the short name of your account in line 3, unless you've moved your home folder, in which case you will need to change the paths in lines 2 and 3; your computer should then start up and log in, but your account's data will have been reset to the defaults. To get your data back, open the Users folder on your hard disk followed by olddata, and then drag documents and other items outside of the Library/Preferences/ folder to your current home folder. One of the items in Library/Preferences/ was likely responsible for the issue.
If you are able to get to the login window but can't log in after moving your home folder, reset the NetInfo database and then move the entire home folder, including Library/Preferences/, to the current home folder.
(14823)

Battery Recall (Need Serious Help)

Similar Messages

Maybe you are looking for