Battery replacement for Thinkpad X60

Hello,
Bought a battery replacement for Thinkpad X60. When tried to install it discovered an L-shaped part of the laptop (seems non-removable) which prevents inserting the battery. Has anybody encountered such a thing?
A pdf with some pictures is uploaded here .
Thank you!
Solved!
Go to Solution.

Welcome to the forum!
You're referring to the plastic L-shaped part on picture #2, right? That's a spacer for the X6xs models. You can remove it by loosen the two screws with a coin.
That's an aftermarket battery, not a Lenovo one btw.
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Similar Messages

Where can I buy a battery replacement for Yoga 13?

Just curious, since this is an internal battery, where can I buy a genuine Lenovo battery replacement for Yoga 13 if I want to replace it down the road?
Thank you

can we choose a greater battery such as not 4 cell but 6 cell battery.
as my yoga 13 battery lasts just for 3 and half hours only when i was surfing on web connected to wifi
this device came to me as replacement of u300s which had 4.5 hours use of battery min.
yoga 13 battery is a disappointment for me

RAM upgrade for Thinkpad X60

Hello
I plan to upgrade my RAM from 1GB to 4GB in my X60. I have found two different RAM models of Kingston. One is specially made for Lenovo X60 [1] and one is the HyperX model [2] with the same specs. Should I chose one over the other? If yes, which and why?
Regards
MonsieurBon
[1] http://www.studentenrabatt.ch/w/Produktdetail?action=product.do&content=Produkt-Beschreibung&id=0000...
[2] http://digitec.ch/ProdukteDetails2.aspx?Reiter=Details&Artikel=149023

The Intel 945 Chipset does not support "memory hoisting" or "memory remapping" feature (Whatever you wanna call it). Your machine loses 1GB of RAM, so it can map physical devices. And No, you cannot turn of devices in the bios to gain RAM memory. I tried it. In my opinion, 64 bit computing was a kludge at the start. They should have abandon 32 bit support completely at the start. What would really tick me off, if I had a desktop with the same problem. I know a few people who ran into that problem.

Cmos (rtc) battery replacement for hp G62-b25sa

Hello!
Could anybody help me to replace CMOS (RTC) battery for my laptop HP G62-b25sa? And How can I find the correct CMOS battery for this model HP G62-b25sa ?

Hi
Please find the link given below check page number 51 how to replace the CMOS battery on your unit. Part number RTC battery 606015-001.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Thinkpad X60 Battery

HELP! Anyone knwo where I can buy X60 's orignial battery?
ThinkPad R60 (9457-AY1), Centrino Duo, 1GB RAM, 80HHD, XP

You can buy the battery from Lenovo.com the X61 battery is compatible with the X60 machine.

[SOLVED] ACPI handler.sh no longer working (Thinkpad X60 Tablet)

Hello there,
I recently did a few updates on my system to reduce power usage and get hdaps working. For some reason one of these changes must have broken ACPID in some way so that what I wrote in handler.sh no longer has any effect when I e.g. press the configured buttons to lock my screen or shut down, but I have no clue which.
I'm not really familiar with where ACPI and ACPID keeps all their logs either, and which parts in there might mean something for me. I don't even know how I can check if ACPI is running properly and just ACPID isn't, for instance (both are running thought, confirmed with ps -A).
Here's what I can remember of what I did:
-full system update
-install cpufreq to redcude power usage with acpi_cpufreq
-install HDAPS with Thinkpad driver, as described on the Wiki
-tweak my laptop-mode settings, e.g. disable VGA output when in laptop mode
-enable AHCI for my hard drive in kernel image and BIOS
Would be great if you could help me troubleshoot this somehow, as I really don't have a clue on how to fix this. Here's some output that might be helpful for starters:
cat /etc/acpi/handler.sh
#!/bin/sh
set $*
case "$1" in
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF)
#Power off
shutdown -h now
logger "ACPI action undefined: $2"
esac
ibm/hotkey)
#echo "Display swiveled">/dev/tty5
case "$2" in
HKEY)
case "$4" in
00005009)
#Swiveling down
/bin/sh /etc/acpi/actions/swivel-down
0000500a)
#Swiveling up
/bin/sh /etc/acpi/actions/swivel-up
00001002)
#Lock screen
xscreensaver-command -lock
#run_once xtrlock &
00001004)
#Standby button
xscreensaver-command -lock ; s2ram
00001005)
#Network button
/etc/rc.d/net-auto-wireless restart
00001009)
#Reboot
shutdown -r now
00007000)
#WLan button switched
/etc/rc.d/net-auto-wireless restart
fi
esac
esac
button/sleep)
case "$2" in
SLPB) echo -n mem >/sys/power/state ;;
*) logger "ACPI action undefined: $2" ;;
esac
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
#laptop mode should take care of this alone!
#/etc/rc.d/laptop-mode start
00000001)
#/etc/rc.d/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
battery)
case "$2" in
BAT0)
case "$4" in
00000000) #echo "offline" >/dev/tty5
00000001) #echo "online" >/dev/tty5
esac
CPU0)
*) logger "ACPI action undefined: $2" ;;
esac
button/lid)
#echo "LID switched!">/dev/tty5
case "$2" in
LID)
if [[ `cat /proc/acpi/button/lid/LID/state | awk '{print $2}'` = "closed" ]]
then
#run_once xtrlock &
xscreensaver-command -lock
fi
esac
logger "ACPI group/action undefined: $1 / $2"
esac
dmesg | grep acpi
BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
modified: 000000007f6d0000 - 000000007f6df000 (ACPI data)
modified: 000000007f6df000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP 000f67c0 00024 (v02 LENOVO)
ACPI: XSDT 7f6d11e8 0008C (v01 LENOVO TP-7J 00001140 LTP 00000000)
ACPI: FACP 7f6d1300 000F4 (v03 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
ACPI: DSDT 7f6d1690 0D56F (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
ACPI: FACS 7f6f4000 00040
ACPI: SSDT 7f6d14b4 001DC (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
ACPI: ECDT 7f6debff 00052 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: TCPA 7f6dec51 00032 (v02 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: APIC 7f6dec83 00068 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: MCFG 7f6deceb 0003C (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: HPET 7f6ded27 00038 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
ACPI: SLIC 7f6dee62 00176 (v01 LENOVO TP-7J 00001140 LTP 00000000)
ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7J 00001140 LTP 00000001)
ACPI: SSDT 7f6f2603 0025F (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2862 000A6 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2908 004F7 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: SSDT 7f6f2dff 001D8 (v01 LENOVO TP-7J 00001140 INTL 20050513)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
ACPI: Core revision 20090903
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
acpi device:01: registered as cooling_device0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Lid Switch [LID]
ACPI: Sleep Button [SLPB]
ACPI: Power Button [PWRF]
i915 0000:00:02.0: power state changed by ACPI to D0
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ACPI: SSDT 7f6f1ccc 001FE (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 7f6f1f4f 006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 7f6f1c04 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 7f6f1eca 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
ACPI: Thermal Zone [THM0] (56 C)
ACPI: Thermal Zone [THM1] (59 C)
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7JET29WW (1.14 ), EC 7JHT13WW-1.04
thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 6363WDK
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
cat /var/log/acpid.log
Feb 28 13:19:28 damnation acpid: exiting
Mar 1 12:48:43 damnation acpid: starting up
Mar 1 12:48:43 damnation acpid: 4 rules loaded
Mar 1 12:48:43 damnation acpid: waiting for events: event logging is off
Mar 1 12:48:44 damnation acpid: client connected from 1737[82:82]
Mar 1 12:48:44 damnation acpid: 1 client rule loaded
Mar 1 12:49:39 damnation acpid: client connected from 2523[0:0]
Mar 1 12:49:39 damnation acpid: 1 client rule loaded
Mar 1 12:49:56 damnation acpid: exiting
Mar 1 12:49:56 damnation acpid: starting up
Mar 1 12:49:56 damnation acpid: 4 rules loaded
Mar 1 12:49:56 damnation acpid: waiting for events: event logging is off
Mar 1 12:49:57 damnation acpid: client connected from 2523[0:0]
Mar 1 12:49:57 damnation acpid: 1 client rule loaded
Mar 1 12:50:01 damnation acpid: client connected from 1737[82:82]
Mar 1 12:50:01 damnation acpid: 1 client rule loaded
Mar 2 10:23:50 damnation acpid: client 2523[0:0] has disconnected
Mar 2 10:23:50 damnation acpid: client connected from 2523[0:0]
Mar 2 10:23:50 damnation acpid: 1 client rule loaded
Mar 2 10:52:18 damnation acpid: client 2523[0:0] has disconnected
Mar 2 10:52:18 damnation acpid: client connected from 2523[0:0]
Mar 2 10:52:18 damnation acpid: 1 client rule loaded
Mar 2 17:00:21 damnation acpid: client 2523[0:0] has disconnected
Mar 2 17:00:21 damnation acpid: client connected from 2523[0:0]
Mar 2 17:00:21 damnation acpid: 1 client rule loaded
Mar 3 09:54:32 damnation acpid: client 2523[0:0] has disconnected
Mar 3 09:54:32 damnation acpid: client connected from 2523[0:0]
Mar 3 09:54:32 damnation acpid: 1 client rule loaded
Mar 3 10:28:14 damnation acpid: exiting
Mar 3 10:28:14 damnation acpid: starting up
Mar 3 10:28:14 damnation acpid: 4 rules loaded
Mar 3 10:28:14 damnation acpid: waiting for events: event logging is off
Mar 3 10:28:15 damnation acpid: client connected from 2523[0:0]
Mar 3 10:28:15 damnation acpid: 1 client rule loaded
Mar 3 10:28:19 damnation acpid: client connected from 1737[82:82]
Mar 3 10:28:19 damnation acpid: 1 client rule loaded
Mar 3 10:37:44 damnation acpid: exiting
Mar 3 10:37:44 damnation acpid: starting up
Mar 3 10:37:44 damnation acpid: 4 rules loaded
Mar 3 10:37:44 damnation acpid: waiting for events: event logging is off
Mar 3 10:37:45 damnation acpid: client connected from 2523[0:0]
Mar 3 10:37:45 damnation acpid: 1 client rule loaded
Mar 3 10:37:49 damnation acpid: client connected from 1737[82:82]
Mar 3 10:37:49 damnation acpid: 1 client rule loaded
Mar 3 12:22:44 damnation acpid: exiting
Mar 3 12:23:44 damnation acpid: starting up
Mar 3 12:23:45 damnation acpid: 4 rules loaded
Mar 3 12:23:45 damnation acpid: waiting for events: event logging is off
Mar 3 12:23:46 damnation acpid: client connected from 3417[82:82]
Mar 3 12:23:46 damnation acpid: 1 client rule loaded
Mar 3 12:24:40 damnation acpid: client connected from 4287[0:0]
Mar 3 12:24:40 damnation acpid: 1 client rule loaded
Mar 3 12:24:55 damnation acpid: exiting
Mar 3 12:24:55 damnation acpid: starting up
Mar 3 12:24:55 damnation acpid: 4 rules loaded
Mar 3 12:24:55 damnation acpid: waiting for events: event logging is off
Mar 3 12:24:56 damnation acpid: client connected from 4287[0:0]
Mar 3 12:24:56 damnation acpid: 1 client rule loaded
Mar 3 12:25:00 damnation acpid: client connected from 3417[82:82]
Mar 3 12:25:00 damnation acpid: 1 client rule loaded
Mar 3 12:40:54 damnation acpid: exiting
Mar 3 12:49:47 damnation acpid: starting up
Mar 3 12:49:47 damnation acpid: 4 rules loaded
Mar 3 12:49:47 damnation acpid: waiting for events: event logging is off
Mar 3 12:49:49 damnation acpid: client connected from 3396[82:82]
Mar 3 12:49:49 damnation acpid: 1 client rule loaded
Mar 3 12:50:12 damnation acpid: client connected from 5224[0:0]
Mar 3 12:50:12 damnation acpid: 1 client rule loaded
Mar 3 12:50:59 damnation acpid: exiting
Mar 3 12:50:59 damnation acpid: starting up
Mar 3 12:50:59 damnation acpid: 4 rules loaded
Mar 3 12:50:59 damnation acpid: waiting for events: event logging is off
Mar 3 12:51:00 damnation acpid: client connected from 5224[0:0]
Mar 3 12:51:00 damnation acpid: 1 client rule loaded
Mar 3 12:51:04 damnation acpid: client connected from 3396[82:82]
Mar 3 12:51:04 damnation acpid: 1 client rule loaded
Mar 3 13:21:42 damnation acpid: exiting
Mar 3 13:21:42 damnation acpid: starting up
Mar 3 13:21:42 damnation acpid: 4 rules loaded
Mar 3 13:21:42 damnation acpid: waiting for events: event logging is off
Mar 3 13:21:43 damnation acpid: client connected from 5224[0:0]
Mar 3 13:21:43 damnation acpid: 1 client rule loaded
Mar 3 13:21:47 damnation acpid: client connected from 3396[82:82]
Mar 3 13:21:47 damnation acpid: 1 client rule loaded
Mar 3 13:22:21 damnation acpid: exiting
Mar 3 13:22:21 damnation acpid: starting up
Mar 3 13:22:21 damnation acpid: 4 rules loaded
Mar 3 13:22:21 damnation acpid: waiting for events: event logging is off
Mar 3 13:22:22 damnation acpid: client connected from 5224[0:0]
Mar 3 13:22:22 damnation acpid: 1 client rule loaded
Mar 3 13:22:26 damnation acpid: client connected from 3396[82:82]
Mar 3 13:22:26 damnation acpid: 1 client rule loaded
Mar 3 13:23:03 damnation acpid: client 5224[0:0] has disconnected
Mar 3 13:23:03 damnation acpid: client connected from 5224[0:0]
Mar 3 13:23:03 damnation acpid: 1 client rule loaded
Mar 3 13:25:00 damnation acpid: exiting
Mar 3 13:25:00 damnation acpid: starting up
Mar 3 13:25:00 damnation acpid: 4 rules loaded
Mar 3 13:25:00 damnation acpid: waiting for events: event logging is off
Mar 3 13:25:01 damnation acpid: client connected from 5224[0:0]
Mar 3 13:25:01 damnation acpid: 1 client rule loaded
Mar 3 13:25:05 damnation acpid: client connected from 3396[82:82]
Mar 3 13:25:05 damnation acpid: 1 client rule loaded
Mar 3 13:29:52 damnation acpid: client connected from 21588[1000:100]
Mar 3 13:29:52 damnation acpid: 1 client rule loaded
Mar 3 13:30:27 damnation acpid: client 21588[1000:100] has disconnected
Mar 3 13:36:15 damnation acpid: exiting
Mar 3 13:37:54 damnation acpid: starting up
Mar 3 13:37:54 damnation acpid: 4 rules loaded
Mar 3 13:37:54 damnation acpid: waiting for events: event logging is off
Mar 3 13:37:56 damnation acpid: client connected from 3419[82:82]
Mar 3 13:37:56 damnation acpid: 1 client rule loaded
Mar 3 13:38:28 damnation acpid: client connected from 4292[0:0]
Mar 3 13:38:28 damnation acpid: 1 client rule loaded
Mar 3 13:39:24 damnation acpid: exiting
Mar 3 13:39:24 damnation acpid: starting up
Mar 3 13:39:24 damnation acpid: 4 rules loaded
Mar 3 13:39:24 damnation acpid: waiting for events: event logging is off
Mar 3 13:39:25 damnation acpid: client connected from 4292[0:0]
Mar 3 13:39:25 damnation acpid: 1 client rule loaded
Mar 3 13:39:29 damnation acpid: client connected from 3419[82:82]
Mar 3 13:39:29 damnation acpid: 1 client rule loaded
Mar 3 13:44:09 damnation acpid: client connected from 4488[1000:100]
Mar 3 13:44:09 damnation acpid: 1 client rule loaded
Mar 3 13:45:42 damnation acpid: client 4488[1000:100] has disconnected
Mar 3 13:58:17 damnation acpid: exiting
Mar 3 13:58:17 damnation acpid: starting up
Mar 3 13:58:17 damnation acpid: 4 rules loaded
Mar 3 13:58:17 damnation acpid: waiting for events: event logging is off
Mar 3 13:58:18 damnation acpid: client connected from 4292[0:0]
Mar 3 13:58:18 damnation acpid: 1 client rule loaded
Mar 3 13:58:22 damnation acpid: client connected from 3419[82:82]
Mar 3 13:58:22 damnation acpid: 1 client rule loaded
(are all these "client has disconnected" messages normal?)
Last edited by Natanji (2010-03-07 11:03:54)

I don't know if it works for everyone but i have just fixed the acpi rotate for my x60t
/usr/bin/xrotate
#!/bin/sh
output=LVDS1
if [ "$XROT_OUTPUT" ]
then
output=$XROT_OUTPUT;
fi
devices="stylus eraser"
geomnbr=0
xrandr=normal
wacom=normal
if [ "$1" == "-" ] || [ "$1" == "+" ] || ! [ "$1" ];
then
operator="$1";
[ "$1" ] || operator='+';
case `xrandr --verbose | grep "^$output " | sed "s/^[^ ]* [^ ]* [^ ]* ([^(]*) $[a-z]*$.*/\1/"` in
normal) geom=0;;
left) geom=1;;
inverted) geom=2;;
right) geom=3;;
esac
let geom=${geom}${operator}1+4
let geom=${geom}%4
else
geom="$1"
fi
case $geom in
1) wacom=CCW; xrandr=left ;;
2) wacom=HALF; xrandr=inverted ;;
3) wacom=CW; xrandr=right ;;
*) wacom=NONE; xrandr=normal ;;
esac
echo "xrandr to $xrandr, xsetwacom to $wacom" >&2
if xrandr --output "$output" --rotate "$xrandr"; then
for device in $devices
do
xsetwacom set "$device" Rotate "$wacom"
done
fi
#workaround for linuxwacom bug
if [ "`xsetwacom get stylus Mode`" == '1' ]; then
for decive in $devices
do
xsetwacom set stylus CoreEvent "off"
xsetwacom set stylus Mode "off"
done
{ sleep 1;
for device in $devices
do
xsetwacom set stylus Mode "on"
xsetwacom set stylus CoreEvent "on"
done; } &
fi
/etc/acpi/thinkpad-swivel-up.sh
#!/bin/bash
XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 0
/etc/acpi/thinkpad-swivel-down.sh
#!/bin/bash
XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 1
The problem was that my acpid starts long before xorg.
System:
Thinkpad x60 tablet
xorg 1.8
acpid 1.0.10

Fan error on IBM thinkpad X60s notebook

When I switch on IBM thinkpad X60s notebook. I can hear a sound from fan like it is try to move and then stop. After awhile an error "fan error" appear on the screen. I would like to know is it related to fan problem? If yes, Do I need to change a new fan? Actually, this notebook is out of warranty. So what will it cost for fan assembly and the labour charge? I live in Johor Bahru, Malaysia. I would like to know is there any service center in Johor Bahru? Thanks for reading and reply to my post.

Apa kabar?
Sounds like you will need another fan installed. If you unit is still under warranty, call your local tech support to assist. I'm not sure about your exact location in Malaysia, but I know that there are some locations in KL.
I was able to find this tech support number in Malaysia for you.
1800-88-1889 (Local number only)
+603 8315 6855 (DID)
Monday - Friday 8:30AM - 5PM
Give them a call for assistance. Best of luck.
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Which Linux is the best for a X60 and T60/61?

@Ajkula66, which version or flavour of Linux do you think is the best for a X60 and T60/61?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Solved!
Go to Solution.

I'm very partial to Mint and run it on all of my ThinkPads...
There's other good stuff out there, depending on what one needs/wants, but Mint is pretty much plug and play on most machines that I've tried it on...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Thinkpad X60 - Power Manager issue

Hi,
I just have to install the Power Manager version 1.89 into my Thinkpad x60.
However, it shows the "Black" Triangle which is located next to the power manager guage in the task bar.
Before the installation, I have not this problem. And I am using the genuine battery.
Could anyone help ? Any previous version can I download to avoid that problem?
Thanks,
Tlee

While I see the information of the black triagnle, it shows "my battery can run 3.x hrs, the new battery can run 5.x hrs" and inform the link to lenovo. It seems ask the user to purchase the new battery.
But I want to point out. my battery is in good condition. I think I no need to purchase the new battery at the time.
Now, my battery is suddenly damaged. While I read the my battery information from the power manger, it shows 99% capacity. But the current is " 0 ". It seems the battery is internal locked.
It is not really likes as you said the battery would likely fail soon. Since, I can use it more than 3 hrs continously ( 8Cells)
Also, I searched many posts and indicated that my battery is the detect unit within Lenovo recall program FRU no: 93P5029.
But nobody inform me before. Now, the recall program is expired..............
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67765
PS: my battery first charged at 2006-12 / Cycle count is 134

Laptop (thinkpad X60) won't reboot

Hey all,
I finally got around to installing Arch on my laptop; its been running ubuntu these past months. I didn't know this machine could be this fast. ;-) I think its mostly set up now, but I have an odd problem that is related to... what ACPI?
I have a Lenovo Thinkpad X60 Core Duo. Everything worked fine on Ubuntu, but I thought I'd go back to Arch for simplicity and so I'd stop feeling like a hypocrite adminning these forums. And for the speed burst.
My most pressing issue right now is that I can't reboot. 'halt' works just fine, the way its supposed to. 'reboot', however, shuts down the computer, takes me to a message "Restarting System" or some such, and then pauses for several seconds. Then the screen blanks like its in some sort of standby mode, but it hasn't shut down, as the lights are still on and the fans are still running.
My guess is I need to modprobe some module that is missing right now, but I don't know what it might be. Any suggestions?
Dusty

I've had, or have rather, a similar problem on my old Toshiba laptop. Kernel 2.6.22 seems to be to blame. It doesn't happen often but it does happen. It takes a bit of voodoo to get around it - like shutting the laptop down completely, unplugging and then replugging the power cable and such...
This might or might not be helpful but try booting with "ec_intr=0" kernel command line parameter and see if that changes anything. On my laptop it does help, somewhat (acpi on this toshiba is a mess)... I seem to need to shut the computer down completely before booting the system with this for it to take effect. I know, this is all very strange, but something is better than nothing I guess

My battery barely lasts for 3 hours...

My battery barely lasts for 3 hours and won't charge while in use & the phone heats a lot.
The phone is only about 6 months old, will the battery be replaced under the apple warrenty?

Please read this message and also my message here maybe it helps in resolving the battery drainage for you.

A1281 is the battery i got for my 15inch MBP. Is the battery life only 2 - 3 hours for a new battery on this device.

A1281 is the battery i got for my 15inch MBP. Is the battery life only 2 - 3 hours for a new battery on this device.
This is from Apple.
2 to 3 hours seems very low.
what is teh standard or advertised spec for a 15 inch Macbook Pro with this battery.
I would like to know so that i can return it if this is not normal.
Its expensive so comments would be appreciated.

I say it depends on your model? average usage is about 3-4 hours depending on what you use and how you use it. Adobe Flash player eats a lot of battery power so if you are on a web page and has flash player, likely that it's eating up battery because of it's power thirsty.
Also check your systems activity monitor. It could be possible that one of your program/apps did not close right and may be still running. So check for that and end the process if necessary.
If you have a backlight keyboard, in a broad daylight, it's not necessary to have it on.
I also suggest that you use it plugged in most of the time, and it's not going to hurt or damage the battery if you have it plugged in all the time. Only use on battery if you are going to places that has no access to the outlet. If you are at home, then keep it plugged in. Just keep in mind to fully drain the battery until it your MBP turns off on it's own. This is the calibration process so that you have the most accurate battery readings.
The standard for 2011 MBP is 7 hours on battery. Before that model is 10 hours, but i don't believe that previous models will last 10 hours. Last week I calibrated my battery readings from fully charged and it took 9 hours to completely drain out the battery (I have a 2011 model),
If you think it's not normal and that your battery doesn't meet your expectation then set up an appointment with the genius bar and have them test the battery. They will determine whether it is faulty or not.

Hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now looping on 4 items to delete for the past 2 weeks. Can't reboot, reload, or restart. I have to let the battery run down for it to turn off. How to fix this, please?

I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.

I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
                 Article HT3910
                 located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network.

What Battery model number for MacBook Pro 13, model 7,1

Can anyone confirm the correct battery model needed for a MBP 13" 2010 - model no. 7,1
I just need to order one. But don't have the laptop with me to check.
Thanks.
Jim.

Don't worry boys & girls.
I found it...... It's
Battery model no. A1322 - Li-ion Polymer ... 10.95V - 63.5Wh.
I hope this helps anyone who needs a quick reference.
Like I did.
Time to get an relatively inexpensive one now. (Not £109).
Jim.

On IOS 7, how can you tell when your battery is charging for your phone?

on IOS 7, how can you tell when your battery is charging for your phone?

thanks everyone=you all helped.
I wasn't used to not getting the 2 sided plug- now I know I am ok>
**hugs**

Battery replacemen​t for Thinkpad X60

Similar Messages

Maybe you are looking for

Battery replacement for Thinkpad X60