Battery replacement caused super slow performance

I experience a strange behaviour  of my laptop after the battery change i.e. horrible lags – the operating system is literally choking, and loading takes.
First I thought that maybe that is a coincidence so I tried to clean the drive, to use a disk utility and other actions which one normally does to regain the performance, but without any result
I also opened the system monitor app and the memory usage seems fine
Today when I came to work my laptop turned off in the night and when I rebooted the fan ran like crazy – also it came back to its old super fast performance,
I thought the problem solved itself but the fan didn’t want to turn off
I checked the battery but then the battery icon showed x on the battery meaning there was no battery
Like in this article:
http://osxdaily.com/2013/05/07/fix-missing-battery-fans-running-macbook/
I did SMC reset and ideed the fan stopped and the battery status went back to normal but at the same time the system went back to
the same super  slow mode as before
I ran out ideas what could that be and how i can get  my old performance back
please help

Some detail I forgot - i have the NTE5 socket and, since calling BT tech support have got the HH plugged direct into the test socket, via my ASDL filter, with no improvement.
I have done quiet line test - my only telephone is a wireless one - and it can be fairly crackly - so I do hear some squeaks and crackles when doing the quiet line test - but have no idea if this is my phone or the line.
Broadband WAS repeatedly disconnecting (i.e. the B was going red then orange then back to blue) but as I don't sit looking at the HH all day I have no idea how often it is happening...
After my third call to BT i have an engineer due to come out on Monday with the ominous "if we can't find a fault it'll cost you £100" ringing in my ears...

Similar Messages

  • Super Slow Performance with Xserve RAID / Promise Fibre

    Hey guys,
    I am experiencing a strange thing on both 10.5.8 and 10.7.5 servers (yes these are in the process of being retired). They are sharing out either an Xserve RAID or Promise Vtrak with OS X Server.
    We have the fibre channel card and the storage attaches to there and they appear mounted on the desktop.
    The problem we are having is that whenever OS X's file sharing is enabled these volumes run incredibly slow! I did a clean install of OS X 10.7.5 on an entirely different machine and it was still bad. All of my tests show that when you turn off file sharing, both AFP and SMB, the performance goes back to normal -- so what can we do here??? These are file servers, so that's pretty much the only thing that needs to work.
    Thanks,
    Andrew

    Slow/poor RAID performance can be down to a number of things. Some of which are easier to check than others.
    Some easy things to check are:
    How much data is stored on the RAIDs?
    Performance really drops off alarmingly once the RAID gets to 85% full. For a 1TB RAID this means you need to keep at least 250GB of free disk space at all times otherwise you will get the poor performance you're seeing. Once it gets to 86/87/88% full performance can drop alarmingly. Yes those few percent points can make a big difference.
    How is the data stored on the RAIDs?
    Having thousands and thousands of single files stored loosely on the RAID or within one single folder is not a good idea. The Finder can be and is fairly inefficient at drawing the icons for those files that are presented to network users accessing the share point(s). This can/and is perceived as very slow performance as you're viewing the files over a network connection. One way to overcome this 'feature' is to organise the data into logical folders/sub-folders and/or shares.
    Are there problems with the file/directory structure of the RAIDs themselves?
    Use DiskUtility (or better still DiskWarrior) to repair any issues (generally built up over a period of time) with the storage disks you have. You can't repair permissions using DiskUtility or anything else on a non-OS bearing drive. Don't forget to do this also for your System Drive (which can have its permissions repaired) as well. This will mean the server being off-line for a time whilst the system (OS) drive is being repaired. Before doing this step I would make sure you have a current and effective backup of your System/Server OS as well as all data stored on the RAIDs themselves. Hopefully you should be doing this for your data already?
    To understand Disk Utility's repair permissions feature please read Apple's support document here:
    About Disk Utility's Repair Disk Permissions feature - Apple Support

  • Creating text boxes is causing VERY slow performance

    i've read the threads about how slow indesign cc has been from last year.  i would assume this issue had been fixed by now, so i just switched our
    whole company over from cs5 to cc.  we are a prinitng company that makes calendars with many text boxes, and indesign cc is about 1/2 as fast
    as cs5 was in creating these from scratch.  i've noticed the more text boxes, whether used or blank, causes it to slow even more.  i can't do anything
    without it lagging and pausing, which is not productive whatsoever.
    is there any fix at all to this or is this ever going to be fixed?  i have found no solution. 
    we have 32 gb ram and decently fast macs (not the newest but decent), but processing speed can't be the issue when it seems everyone is having these same problems.  (we do not have retina dislplays, just normal samsung monitors)
    we have tried saving new files out as the new cc version but that doesn't help.
    try it for yourself.  make an 8 1/2 X 11 document with 100 step and repeated text boxes.  even left blank, the whole programs slows down.
    i need help, or else i have no choice but to roll everyone back to cs5.

    You did receive the file.  You already replied to me about the issue.  See below.
    Since I have last spoken with you I did download os 10.7.5, and I will work with it today to see if it's any faster.  Unfortunately as I predicted it  "broke" 2 of our other powerpc applications that I absolutely have to have, so that's a whole other set of issues that this has caused me.
    I will let you know if I still have the same performance issues.  This is the last thing I can try because I cannot upgrade this mac to 10.8.  If the performance isn't better I guess I'll just be forced to go back to CS5.
    Chris Smith
    Drum-Line Graphics Dept. Manager
    800-284-2456 Ext. 133
    Hi Chris,
    We are officially NOT supporting 10.6.8. The official supported platforms of Mac are 10.7 onwards.
    I too would recommend that you upgrade as we haven't performed much testing on 10.6.8. It currently works but the outcome may not be nice as you are already facing.
    Maybe you can try upgrading to 10.7 or 10.8, your mac may support these platforms and so does InDesign.
    Thanks
    Javed

  • 7.4 upgrade causes super slow start up and won't allow Zone Alarm to open.

    I recently upgraded my pc to iTunes 7.4 and until now have never had a problem with iTunes on my pc. After restarting it, it goes through the normal start up procedures until it shows my desktop image then it hangs there. After 5-10 minutes my desktop icons show up and the pc will work fine, itunes included with one exception. Zone Alarm now doesn't start up. Tried to reinstall but it still hangs in the same spot on restart and does the 'no icons's or pc use for 5+ minutes', then it's back to normal except no Zone Alarm.
    Any ideas? tia.

    Repairing permission daily is a complete waste of time and will not help you. In fact, repairing the disk permissions needs to only be done about 2-3 times a year at best.
    You say you verified the disk but did you repair it? Did you get a message that the "disk appears to be o.k."? What kind of install did you do? My guess is you did an archive and install.
    Onyx is a troubleshooting tool and should not be used on a regular basis for anything. Caches do not need to be cleaned on a regular basis and everything else Onyx and similar utilities claim to do are handled by the system automatically. Do not use these utilities unless you are having a problem.
    My guess is you have a serious problem with file corruption.
    Have you tried creating a new account? Try that and see if the problem follows to the new account or not.

  • Printer redirection Slow performance

    We have a Remote Desktop Server 2008R2.
    When a user logs in (trough TS Gateway) with Printer redirection enabled (Using Easy Print method) the performance is very bad.
    It's not printing that is slow, it's the performance of the RDP Session/server
    For our test we disabled AntiVirus on the server.
    Fox example: A user logs in with Local Printers, opening a small Doc file takes about 10 seconds. If the user logs of and logs in without local printers the doc file opens within a second.
    Also generally everything is much faster without printer redirection.
    The server is fully updated and we are using the most recent RDP Client.
    The server is connected to an internet connection with 50/5 Mb Down/Up speed. 

    Hi,
    I did a couple of tests:
    - Step1: Removed all local printers, logged on with printer redirection enabled on the RDP client. Result: No performance problems with opening DOC files.
    - Step2: Added printer 1, logged on. Result: Slow performance with opening DOC files.
    - Step3: Removed printer 1, added printer2, logged on. Result: Slow performance with opening DOC files.
    - Step4: Repeated Step3 with all printers. Result: Slow performance with opening DOC files.
    So it doesn't matter which printer we add, it always results in slow performance. The printers are all from different brands. I happens with all user accounts, also with users that are Domain Admins.
    OS:
    RDS Server: Windows Server 2008 R2 Standard SP1
    Client: Windows Server 2008 R2 Standard SP1
    We monitored the CPU and Memory usage while starting Word, the cpu's doesn't use more then 4% utilization and the memory usage is low.
    The Remote Desktop Services server has Office 2003 installed with SP3. We cannot upgrade Office to 2007/2010 because it's incompatible with our database.
    Can it be that Word 2003 is loading the redirected printers while opening a document what is causing the slow performance?
    Kind regards,
    Bas 

  • Linux AMD64, JDK 1.5_03: slow performance with large heap

    Tomcat app server running on jdk 1.4.2 on 32 bit Linux configured with mx1750m, ms1750m, runs fast. Returns 2MB of data through HttpServlet in under 30 secs.
    Moving the same app server to 64 bit on jdk 1.5.03 configured with mx13000m, ms10000m, the same request for data takes 5-20 minutes. Not sure why the timing is not consistent. If the app server is configured with mx1750m, ms1750m, performance is about 60 secs or less.
    I checked java settings through jstat. -d64 is the default. Why would increasing the heap cause such slow performance? Physical memory on the box = 32MB.
    It looks like it's definitely java related since a perl app making a http request to the server takes under a minute to run. We moved to 64bit to get around 1.7GB limitation of 32bit Linux but now performance is unacceptable.

    I Aggree, a AMD 64 with only 32 MB of memory would be a very strange beast indeed, heck, my graphics card has 4 times that, and it's not the most up-to-date.
    Keep in mind that switching to 64 does not only mean bigger memory space but also bigger pointers (on the sub-java level) and probably more padding in your memory, which leads to bigger memory consumption which in turn leads to more bus traffic which slows stuff down. This might be a cause for your slowdown, but that should not usually result in a slowdown as sever as the one you noticed.
    Maybe it's also a simple question of a not-yet-completely-optimized JDK for amd64.

  • Firewire 800 slow performance

    I am getting a super slow performance on my 2008 8-core standard mac pro, I cant get more than 25mb/s in any external drive in any of the 2 ports.
    Its very frustrating for me.
    I am running Leopard 10.5.8.

    Well, what kind of external drives are you using...?
    As far as I know, FireWire 800 has a “theoretical” transfer rate of
    up to 800 Mbits/s - that’s about 100 MB/s...
    Under real world conditions one might achieve a maximum sustained
    transfer rate of rather 40 to 50 MB/s...
    Using a high-performance (7200 rpm) external drive, or an “VelociRaptor” (10000 rpm)
    might increase performance...
    Regards
    Nolan

  • First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • Bug report: Energy Manager causes slow performance...

    Very slow Windows Startup..
    Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in the second link I posted also described. CPU usage was low. The disk usage was seemingly not related to Energy Manager (Chrome was usually the worst), but removing Energy Manager completely resolved the problem. If you would find it helpful. I'm quite confident that even with Maximum Processor state at %100, CPU usage was low when it was slow, and that disk access was the culprit.
    previously have use 1.0.0.31 or 32 not sure.
    Windows 8.1
    Im using Lenovo Energy Management Driver
    1.0.0.28
    4.6.2014

    I actually have the same problem.  Sorry to work on a old thread, but...
    I've got my Lenovo B50-70 less than 1 month ago, and had switched it to SSD and had set everything up and is working perfectly.  However there are a bunch of lenovo programs that came pre-installed.  This computer is used mainly for work and I really don't like programs that suddenly pop-up and ask you to do stuff, as it is quite distracting, and with Lenovo Energy Manager being one of them so I removed it.  (I did do some research before I remove...)
    Everything was fine, until when I try to switch on my wifi (I usually have it off, as I use LAN most of the time)...  For the B50-70 there is a airplane button on F7, which allow the user to switch wifi and bluetooth on/off.  That button was unresponsive...  After some digging it is actually related to the power energy manager being removed.  So I've downloaded the latest version from Lenovo and it was working again...
    However though, whenever I start my computer it is taking so long to start...  And I tried uninstalling the power energy manager and it solved the problem...  And I am stuck with either having no wifi on/off ability or a really slow boot, which loses the whole purpose of the SSD.  After you enter your username and password it originally takes around 5~10 seconds to login, now it takes over 1 minute.
    I have found this other link, which says Lenovo Power Manager having the same problem.
    https://forums.lenovo.com/t5/ThinkVantage-Technologies/Bug-report-Power-Manager-causes-slow-performa...
    There is a solution, which you can change the registry to switch a function off.  I've tried it and it didn't work, which is not surprising as it's a different program..  But I am hoping that Lenovo can provide a similar solution for Lenovo Energy Manager...

  • InDesign CS3 performance super slow.

    InDesign CS3 all of a sudden has been taking a long time (1 to 2 minutes) to open and/or save even small files. I've run Apple Jacks, uninstalled then reinstalled InDesign, removed Indesign preferences.  Minimum fonts open. Same slow performance.

    AMAZING. It's like getting a new computer.
    I did disable the thumbnail option in the pages palette. Quit InDe and restarted, no major change.
    So, I removed the auto-activation plug-in for my version of Suitcase Fusion, as Bob so wisely suggests, and saving and opening speeds are no longer an issue.
    So, now what are my options? Because opening that file gave me the dreaded missing fonts dialog box. The best part of using a font manager is the auto activiation feature.
    Bob, is there a better (or another) font management auto activiation solution that works with IDCS3? Will I encounter the same slowdowns if I update my OS and font manager to the latest and use IDCS4?
    Thanks so much for your advice.
    --d
    EDIT: Suitcase Fusion 2 will work with OS 10.4 but it has to be the last iteration: 10.4.11. The upgrade cost is only $50 if you're already an owner. So, that will save me the headache of updating my OS, which will have to happen one day, just not today. One thing at a time.

  • Very slow performance; external boot drive the cause?

    Greetings.
    I bought a 500 GB Hitachi drive for my iMac intending to install it myself. But, alas, I have an iSight iMac and I think it's beyond my ability to do the job. A Mac dealer nearby can do it for me, but wants the computer for two or three days, even thought the installation takes about an hour. They will not make an appointment for me to come in with it and wait.
    So I installed it the drive in an OWC Mercury Elite case, cloned the original drive, and have been booting from the Hitachi via Firewire 400. Just about everything is running at well under previous speeds. Lightroom now takes as much as two to five minutes to spool a large file for printing and sometimes does not even send the file to the printer (in fairness, the latter issue happened sometimes with the internal drive – I wrote about it here before – but at least it didn't take a long time to spool the file, which has to happen each time I click "print" until at last it actually goes to the printer).
    I'm getting slow performance from Safari (4.1.3), Mail (2.1.3), Lighroom 2, Photoshop (CS3). I can't say I've noticed problems elsewhere, but I rarely use other applications.
    I have done all the usual maintenance tasks, besides those the computer does automatically. Repaired permissions. Emptied caches. Burned sage. Etc.
    If this is the inevitable result of running from an external disk, then I'll have to brave the installation or pay someone to do it (which I would do immediately if I knew someone who would do it "while-u-wait").
    If, however, this sounds like booting from the external drive should not be the problem, and there is something I might do to speed things up, I'd be grateful for your suggestions.
    As always, thank you.
    Leonard B.

    Too bad about the site redesign. I had a draft of this message started, then got busy. Now I have no idea where to look for it. (And what happened to the Preview function?)
    ANYWAY…  I talked to a tech person at Other World Computing about the problem. He was of the opinion that the iMac SHOULD be showing some slower response if booted from the external drive, but that maybe the sluggishness in this case was excessive. He had me run a hardware scan to see whether there were any bad blocks. After 24 hours, Speed Tools reported no problems. So now I have run every diagnostic and repair tool I know of and every one that was suggested (every one that I own, that is), and the computer is still hesitating so much that I just have to get up and walk away from it sometimes in order to stay sane.
    I am booting from the original hard drive when I have to do extended internet research (Safari being the biggest speed offender), but run the iMac from the external drive when I have to do photo editing, since all my preferences, Lightroom libraries, etc., are located there. If I had the time to figure out just where the essential, and relevant, system and application files are located, I suppose that I could copy them and move them onto the internal drive. Then I could just use the external for storage of the image files (can't do that on the internal; there's not enough space). However, if what is going on (slowness issue) is indicative of a faulty drive, I'd rather not use it at all, even as a storage or backup drive.
    Any thoughts? Do you suppose this might be a problem with the computer, not with the new drive? I'd hate to ask OWC to exchange it (even if they would do that) and then find out I've got the same trouble.
    Thanks again in advance.
    Leonard

  • Several macbook issues:  date and time, constant spinning ball, super slow

    I have a macbook w/ several problems. these problems started about 3 months after i got it and have continued to escalate, now becoming REAL problems.
    1. The date and time always "stalls". In order to display the correct date and time i have to click on it (top right), the date and time menu appears, and it naturally resets itself to the correct time. It is not a time zone issue. I think this might happen when it falls asleep, which brings me to problem 2.
    2. A lot of times when my computer falls asleep, it doesn't wake up when i open it or when i click the keypad to open. For a while this was such a normal thing that i had to take the battery out for a couple of seconds and then replace it in order for the computer to turn back on. Now, i can push the on/off key to sometimes "wake" it back up. This problem is consistent, yet it doesn't happen every time it goes to sleep. this problem happens maybe 5 times a day.
    3. my computer is SUPER SLOW. Not necessarily the internet, just overall performance. Typing emails (entourage) and regular mail. Using excel and word, iphoto, etc. Switching from one program to another causes the spinning ball to appear for longer than normal.
    Any suggestions would be greatly appreciated. And, i admit in advance, i am not very good at finding my way around the mac, so detailed instructions would be post appreciated! Thanks.
    mac 10.4.11
    L2 Cache (per processor): 2 MB
    Memory: 512 MB

    arunodaya wrote:
    3. my computer is SUPER SLOW. Not necessarily the internet, just overall performance. Typing emails (entourage) and regular mail. Using excel and word, iphoto, etc. Switching from one program to another causes the spinning ball to appear for longer than normal.
    Any suggestions would be greatly appreciated. And, i admit in advance, i am not very good at finding my way around the mac, so detailed instructions would be post appreciated! Thanks.
    mac 10.4.11
    L2 Cache (per processor): 2 MB
    Memory: 512 MB
    since you said that you are using excel and word then i'm going to guess that you also have windows on your system... your computer will not function to its full potential running another OS with only 512 of RAM.... you really need up upgrade to at least 1GB for a requirement or 2GB for a much better performance.

  • So slow performance I can see bad code architecture!  Help!

    I've been a Mac user since 2002, I've resisted the dark side until then.   And I've never had the kinds of problems I am having for the past year and I can't figure it out at all.  I would really like to reinstall Mac OS X 10.7, but I have never used Timemachine to restore data and I'm not sure how the entire process works.  Can someone tell me or give me a relevant link for how to reinstall the entire OS cleanly, without keeping anything, and then to repopulate my home directory with the data from the most recent Timemachine backup.  Note that my backup sits on an external USB drive, which is partitioned so that the first 500GB is used by the Timemachine and the rest (about 1TB) is storage space I keep files on (which are obviously not backed up!).  So I'd need to restore from the first partition of the external drive.  I am really worried that I'll have to hunt down and reinstall all the other apps I have on the system, some of which may not be avilable for download any more perhaps?  Or maybe I'd lose some settings and preferences I like?  Does the Timemachine backup that type of stuff, too, along with the home folder?  I don't know..   I have relied on maybe 1-2 unix tools, too, but I think they are in my home directory, though I'm not sure! 
    The real solution is that I'd just like to speed things up a bit, and not have to go through the reinstall process.  It is a dual core 2ghz machine with 2GB ram.  It's a 13" Macbook mid-2006, so kinda old.  But it used to run flawlessly up unti labout a year ago!  I've run disk utility from Restore mode and it found no errors and there were no permissions to be fixed either.  Here is the break down of the symptoms this machine is suffering with.
    It takes 10 seconds for the hidden dock to appear when I move the mouse to the left edge of the screen, sometimes the beachball appears first.  The CPU monitor does not rise above 15% ever!
    Activating Expose by moving the mouse to the bottom left corner takes roughly 7 seconds or longer.  Beachball never appars, CPU never above 20% either!
    Double click on a desktop folder can take up to 10 seconds to highlight in blue the icon, and then a further 20-30 seconds to actually open the folder.  Sometimes beachball appears twice or three times, the CPU isn't above 15% ever either.
    Creating a new folder reveals a huge flaw in Apple's OS architecture due to the extreme latency of the system.  I can see the folder icon appear first, then a few seconds later the text to the right appears and it says "Untitled Folder", and then the text gets highlighted.  So they're wasting CPU time by showing it once and then highlighting it.  Then I type the new name and I press enter.  Instead of the new name appearing, I can see a further stupidity in design by Apple, because it reverts to "Untitled Folder" for about 5-10 seconds, and then the text is replaced with what I had typed.
    In iPhoto if I select Export and the dialog box is supposed to appear, it doesn't happen the first time I select Export, ever!  I always have to do it twice or three times, and then the dialog box appears.
    In TextEdit, when I select Save for an untitled document, the dialog box appears, but the "File Type" combo box is wrongly placed.  Half of it is on the modal dialog, and the other half is on the desktop.  If I resize the window, the jaggedly placed selection box remains attached at it's mid-point to the right edge of the dialog box, so always half of it is on the desktop!  This happens about 50% of the time.
    If I click on the TimeMachine menu icon (little circular arrow) I get the beachball and then after 15-20 seconds the menu appears!  If I click due to lack of patience many times, the clicks get queued up and then after 20 seconds they all get executed in rapid succession, so the menu opens and closes 3-4 times in a row! 
    The above happens for any menu bar icon, including WIFI, etc...
    Timemachine's "Preparing to backup" can take 10 minutes.  The actual backup takes about 15 minutes, even though it's only backing up 100MB.  And it's always backing up 100MB, every freaking hour (how stupid of Apple not to provide a human-friendly way to control the frequency!).  So for 30 minutes of every hour, Timemachine is backing up.
    I keep my iTunes library on my external drive on the storage partition.  When I'm playing music, all works fine.  When I stop playing music, the external driev spins down.  That's how it should be, to extend it's life.  But OS X insists on waking up the drive every 15 minutes or so even when no application is using it's data.  Unfortunately OS X is so terribly designed, that whenever an exteranl drive is being woken up the entire graphical interface completely and totally locks up for about 5-6 seconds.  Streaming music may continue to play, but nothing else reacts to user input.  Text typing freezes, mouse clicks don't work, things cannot be dragged, cannot switch apps, etc.  There are a ton of people affected by this problem all posting on various forums, so reformatting and reinstalling won't fix this... It's another Apple criplpling effect!  It's been present for at least 2 major versions now! 
    If I am typing an email in Chrome on gmail.com, occasionally the browser tab freezes and refuses to let me type anything for 10 seconds, and when this happens, iTunes starts chopping out for a second or two several times duirng the 10 codn period, as if it can't handle the load.  However CPU stays below 15% during this whole time, too!
    50% of the time when I wake the system from sleep it does not connect to WIFI.  I have to click on the menubar and select my network and then it connects.  My router is not flaky, my other computers do not have this problem, ever!  I have every OS imaginable, too
    Despite all these problems, I have no problems running music apps such as Reason or Garageband, with one caveat.  Garageband struggles to playback songs I've composed on a 17" Powerbook G4!!!!  They have maybe 20 tracks of instruments/audio files, and that ancient CPU could play them without stopping.  This duo core 2GHZ with 2GB of ram periodically reports an overload and stops playback.  The CPU does not even reach 70% during this problematic portion.  Reason never complains, it's always below 10% no matter what I'm doing, and never gives me any problems whatsoever.
    Launching any application takes a full minute, or longer.  Chrome takes 2 full minutes to stop bouncing!  Apple's Mail app takes a minute or a bit longer!
    A basic Google search (typing text into Chrome's bar and pressing enter) takes 25-45 seconds to return results, despite the fact that I can download and acecss streaming and other content instantly from Netflix and other places without any delays!! 
    ***?!?!?!?    Is this a virus or something?!?!?!?  I only install software I buy from the App Store or at a store (beleive it or not there still are boxed softwares, those are super expensive though, hehe!)
    HELP!! 
    p.s. the third option I am thinking of is creating another user account and moving everything over.  But I don't know how to do that safely.  For example, I think iTunes doesn't properly store it's data, and even though I've told it to keep the library on the external drive, the "library" files (XML or wahtever) are kept on the local disk in the home directory?  I don't know, cuz I have two sets of those files, one in my user's directory and one in the iTunes folder on the external drive..

    You are surprised that Mac OS X 10.7 is running on hardware that Apple officially supports and says it will run on?  I find your logic unbelievably falwed.
    Not a single problem I've mentioned would be caused by "slow" CPU or "little" RAM.  How does iPhoto not bringing up the file dialog box have anything even remotely to do with the speed of the CPU or the quantity of RAM?  If what you say is true, then yes, performance would be bad, but it wouldn't be selectively bad.  I stated that apps such as Reason 5 run perfectly fine, even really well.  I can load 30-50 racks and synths and not even reach 50% of CPU utilization, Reason never freezes, etc.  DVD playback never freezes as well!!  Your logic is horrendously flawed, it seems you don't know much about computer architecture   Thus, unfortunately, your reply was of absolutely no help, sorry.
    p.s. the external disk spin up problem freezing up the entire graphical interface also has nothing to do with either my CPU/RAM or the OS version I'm running.  It is a known crippleware factor of Mac OS X that at least a thousand people are complaining about online and Apple has done nothing about! 

  • Slow performance after installation of new OS-X

    I don't know if anyone else has been experiencing the same problem as me, but it seemed to occur after I installed the new OS-X.
    My MacBook Pro has gone stremely slow and it seems to be related to MAIL. I thought that the standard MAIL program that comes with MAC was the problem, so I installed Postbox and that seemed to work for a while (1 day or 2) and then it was the same. It's not just email programs that are slow, but all programs.
    Click and wait seconds (10, 20, 30 sec) just for a program to open. Moving between files is so slow. I feel like I'm using Windows again.
    I'm no expert, but when I look at MEMORY usage, out of 4GB I'm using 3.8GB. My Virtual Memory is 4.76GB. See screen shot below.
    I would apprecaite if anyone can help me resolve what the problem is.
    Thanks
    Richard Giuliano

    First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Imac slow performance after upgrade to 10.10.2

    Following the installation of 10.10.2, my imac (circa 2010) is super slow to launch apps and in general just is under performing. A security update seems to be installed every time I reboot.. has anyone seen similar behavior? Tips ?
    Thanks !

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1290 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 400 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex|sudo:" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Maybe you are looking for