Battery replacement in PXI-8187 controller (part no./procedure)

I need to replace the BIOS battery in a PXI-8187 controller (I am getting CMOS errors on boot). What is the part number for the battery and is there a suggested removal and replacement procedure (space is tight)?

Hi,
I believe the following KB should help answer your question. Thanks!
Replacing the CMOS Battery on a PXI or PXI Express Controller: http://digital.ni.com/public.nsf/allkb/64D90D3DE7ACFAA686256C550063C774
Cheers,
Carisa Leal
Applications Engineer
National Instruments

Similar Messages

How to use SMB trigger input on PXI-8187 in LabView

Hello!
I have PXI-8187 controller instaled in PXI-1031 and two PXI-4071 digital multimeters. I want to trigger mesurement with external trigger. One way is to used AUX port on DMM, another can be TRIG input on PXI 8187 CPU unit. Is possible to use this possibility in LabView 7? How?
Best regards!

There are multiple reasons why this is not a supported feature for triggering under Windows and why NI does not recommend using the controller's SMB connector for this purpose. National Instruments has hardware that was designed specifically for extremely accurate clock generation, synchronization, and triggering between PXI chassis (PXI-665x) and other recommended alternatives listed below.
Non-deterministic propagation delays
1. The controller's SMB input is not guaranteed to have a defined propagation delay to the backplane. This means the SMB trigger on the Windows PXI controller is useless for customers that want deterministic triggering. Unlike our PXI-665x boards which have a maintained API and precise triggering properties, the PXI controller's SMB connector and routing circuitry is intended for Watchdog use under LabVIEW RT and isn't designed for this use case. A trigger propagating through the SMB circuitry and going to the backplane, or vice-versa, could have a great deal of variance in the propagation delay which makes gathering useful triggers impossible. This propagation delay is not something National Instruments specs.
An excellent available workaround: Use the measurement hardware's trigger inputs
2. The triggering inputs on our measurement hardware (that customers likely have in their system) can route triggering signals to the PXI backplane (usually through PFI lines) with deterministic results. This functionality is fully supported in most of our APIs and will be maintained between generations of devices.
NOT backward or forward compatible
3. The SMB input is NOT guaranteed to be compatible between different versions of our PXI controllers under Windows. The hardware properties along with an excellent workaround are the reason we do not support doing routing of triggers through the SMB connector on our PXI family of embedded controllers under Windows. If you are still interested in the beta software despite the shortcomings, visit www.ni.com/support and submit an e-mail request.
Adam Ullrich
PXI/VXI Product Support Engineer
National Instruments

PXI-8187 alwayes boot RT in safe mode

Trying to boot RT on PXI-8187 controller with original setup, what ever RT boot selection is used either hardware switch or BIOS RT boot option, the terminal will show the following:
Unable to load LabVIEW RT from drive!
Booting safe mode from ROM...
mount: Mounting /dev/Ma1 on /home/ftp/c failed: Invalid argument
Entering safe mode.
IP address is: 0.0.0.0
Of course after that you can't do any thing to configure the RT target from the MAX on the host computer.
Please Help.

Thanks,
The initial was NTFS but it has evolved:
I used the recovery CD to change the file system to NTFS, it took a while and it installed windows XP from scratch differently from FirstWare that ghosts it (I think). And it didn't install any NI stuff what so ever.
At the end I got the same result as with using the remote system format disk option.
i.e. The RT controller boots in safe mode displaying the previous message without the mount error but this time I can configure the IP address.
Still I can't install software to it, I get the list of features to install, I select them and press next, then I get a dialog saying:
Cannot process install because other dependencies are required:
LabVIEW RT 1.0.1
LabVIEW RT 6.0.1
LabVIEW RT 6.1.0
LabVIEW RT 7.0.0
LabVIEW RT 7.1
Is this a host or RT Controller issue now?
What's next? Thanks for the help
manora

IPhone 5 battery replaced by Apple, now constantly rebooting

Hello,
Yesterday, my wife and I both had our batteries replaced by Apple as part of the battery replacement program. Mine is working fine, but my wife's is not. When we got home, the battery was at 22% (understandable since it had just been replaced with a new one). I plugged it to charge. After about 4 hours, I checked it, and it was still at 22%! I did a hard reset and the phone came back up at 100%, so I figured it was a glitch. Well, this morning it was still at 100% after not being plugged in since yesterday, so I did another hard reset. Now, the iPhone will reboot itself every 3-4 minutes.
I have tried restoring the phone as a new device. (I can't restore a backup since it will reboot before completing).
Strange thing,...it doesn't seem to reboot unless I am using the iPhone, or it is plugged in trying to sync. If I let it just sit on the table with the screen off, it won't reboot.
I have an appointment at an Apple store tomorrow, but I am afraid since it is out of warranty, they won't help me....even though it was working fine before they replaced the battery (other than the fact the battery died after about 8 hours).
Any thoughts out there?
Thanks,
Jim

Check out my solution. This worked for me after having the battery replaced for my iPhone 5 at the Genius Bar. Not sure if it'll fix the 100% issue though. Tried resetting network settings like above. I'll have to see and wait. Just had my battery replaced yesterday.
Problems since iPhone 5 battery replacement (scroll down to my name)

Suggestions for new battery replacement for 1st gen Ipod?

Hello all,
I recently acquired my brother's 1st gen Ipod mini. I love the thing. As with others, I think I'm having troubles with battery life. I have played songs on it for around 2 hours today. At 1.5 hours of playtime, the battery life indicator was nearly empty (NOTE: I have read this article: http://www.vsa.cape.com/~danh/ipod.htm and I understand the "lying" battery life indicator). A half hour after this, the unit shut itself off: the battery's charge had been depleted.
I have been looking at ebay and there is one company selling a battery for under 10 dollars with shipping. They seem to be fairly reputable, claiming to be a top supplier of Ipod products and that the batteries it sells are superior to the ones that originally came with the 1st gen mini Ipods. They claim the batteries they are selling are " Internal Li-Polymer Apple Mini iPod Battery
- 600 mAh (High Capacity)
- 3.7 V "
I have ALSO seen a replacement battery for the Ipod mini claiming the following:
" Voltage: 3.7V 550mAh "
Yet another claims:
...our battery which is made and tested to the highest international standard gives you a capacity of 650 mAh which is 50% more than the original Apple battery. The original Apple iPod part number is EC003. This is a brand new high-quality generic (non-OEM) battery."
My question is has anyone replaced the battery on their 1st gen mini Ipod? What voltage and mAh readings should I get for the battery I buy?
-Phillip

Anyone correct me if i'm wrong here but AFAIK:
Ok, the main thing to look for is the 3.7v rating. the mAh refers to milli-Amp hours, i.e. the amount of charge the battery can hold, not the current it outputs.
As long as it's 3.7v, it's cool. And the bigger the mAh, the better.
Good luck in your replacement.

TS2634 MY IPOD WILL NOT CHARGE. WHAT DOES BATTERY REPLACEMENT COST?

IPod will not charge. How much does battery replacement cost?

Apple charges $79. A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Have you tried here? Maybe it is not the battery.
iPod touch: Hardware troubleshooting

How to change the battery in the PXI 1002 chassis

I need to change the battery inside the PXI 1002 chassis. How to do it?

Hello,
Where is the battery in the controller?
Thanks.
J. Frantz

Where do i get an original battery replacement for iPhone4 in India?

just wanted to know where can i get a genuine apple oem battery replacement for iPhone4 in India???

Take the device to an authorized repair facitility or Apple store (if there are any in India) and pay them to replace the battery. The device is not designed to be user servicable in any way. Apple does not sell parts.

HDX18 CMOS Battery replacement

Hi. Lately my HP HDX18-1008TX has an error message of "CMOS checksum error" whenever I boot up the laptop. I assumed the CMOS battery is dead. How do I change the CMOS battery and where to buy the battery replacement?
Thank you for your advice.

Hi,
You can buy from HP (part #449729-001) for US$44.8 as shown in the following link:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=2FE7EF80A8C64E0199E13B411E60D911&Searc...
or you can buy a CR2032 battery from every where for aroound US$3.00 (3 bucks). It's your choice.
You also need the following manual which show you where and how to put a new battery to your machine.
http://h10032.www1.hp.com/ctg/Manual/c01705400.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PXI-8187 System state: Unconfigured

Bonjour,
j'ai un problème au boot avec mon controleur PXI-8187 dans un chassis PXI-1000B
message affiché:
Labview RT Boot Loader
(C) Copyright ....
Intel 8255x Ethernet found.
Initializing network ... done: IP address is 0.0.0.0
System state: Unconfigured
Merci pour votre reponse
Cordialement.

Bonjour,
Tout d'abord, il faut connecter votre contrôleur à un PC Host. Sur ce PC Host, il faut que LabVIEW RT (même version que sur votre contrôleur PXI) et MAX (Measurement and Automation eXplorer) y soient installés.
1/ Dans MAX, allez à la rubrique "Systèmes déportés" ainsi votre contrôleur doit apparaître sous cette arborescence.
2/ Une fois votre contrôleur sélectionné, dans la partie droite de MAX, pour configurer l'adresse IP de votre contrôleur, sélectionnez l'obtention d'une adresse IP en DHCP. Afin d'avoir les mêmes paramètres réseau que le PC Host.
3/ Cliquez sur le bouton "Appliquer"
4/ Redémarrez votre contrôleur.
Lors du redémarrage de celui-ci, l'adresse IP configurée précedemment dans MAX, doit apparaître sur l'écran de votre contrôleur.
Ensuite, pour l'utilisation de vos cartes PXI de votre chassis, vous devez installer les drivers correspondants à ces cartes en allant dans la partie "logiciels" de voter contrôleur puis en cliquant sur "Installer". Attention, il faut que les drivers soient installés sur le PC Host et soient plus récents que Novembre 2003.
De plus, voici une :note d'application en anglais reprenant ces différents points.
Salutations,
Isabelle
Ingénieur d'applications
National Instruments France

Battery Replacement (657503-001)

Good Day, Ran HP Battery Check and here is the result... I checked the specs of my laptop online and it states the battery is a "6-Cell 86WHr lithium-ion HP extended life battery" But when I checked the Online Manual pg.39 on battery replacement. It states I need/have a; (9-cell, 91-Wh, 4.1-Ah, Li-ion) batterySpare Part #657503-001 (http://h10032.www1.hp.com/ctg/Manual/c03317166) Went to the HP parts website, I can't find a replacement battery for my model. So here are my questions;1. What is my current battery? a 6-cell or 9-cell? 2. I'm assuming the 9-cell is a better replacement for a 6-cell, what about a 12-cell? Is there any available and will it fit no problem? (don't care about the weight) 3. Since HP parts seems to have discontinued the battery for my model or I can't find it, can you recommend any website selling a good battery for my model within the US or Canada? Thank you for any reply and suggestions. HP Envy 17-3290nrA9P83UA#ABA

Good Day, Ran HP Battery Check and here is the result... I checked the specs of my laptop online and it states the battery is a "6-Cell 86WHr lithium-ion HP extended life battery" But when I checked the Online Manual pg.39 on battery replacement. It states I need/have a; (9-cell, 91-Wh, 4.1-Ah, Li-ion) batterySpare Part #657503-001 (http://h10032.www1.hp.com/ctg/Manual/c03317166) Went to the HP parts website, I can't find a replacement battery for my model. So here are my questions;1. What is my current battery? a 6-cell or 9-cell? 2. I'm assuming the 9-cell is a better replacement for a 6-cell, what about a 12-cell? Is there any available and will it fit no problem? (don't care about the weight) 3. Since HP parts seems to have discontinued the battery for my model or I can't find it, can you recommend any website selling a good battery for my model within the US or Canada? Thank you for any reply and suggestions. HP Envy 17-3290nrA9P83UA#ABA

Can my Ipad 3 have a battery replacement outside the country?

My Ipad 3 has a battery weared. It turns off when the battery drops to 80%. I plan go to Apple Store to have a battery replacement. But i purchased my Ipad in US and now I am in France. Is it possible to have this kind of replacement?
P/S: My Ipad is out of warranty 1 month ago

The fact that you bought it in the U.S. should not make any difference at all. I'm not so sure that they can replace your battery in an Apple Store, typically you have to send the device to Apple in order to have the battery replaced. You are supposed to contact them via the link here.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Change it To France in the upper left and then read the part about Battery Replacement. This is copied from that website.
Battery Replacement
Expand All | Collapse All
What is iPad Battery Replacement Service?
If your iPad requires service due to the battery's diminished ability to hold an electrical charge and it is not covered by Apple's one year limited warranty, the AppleCare Protection Plan, or statutory consumer rights, Apple will replace your iPad for a service fee. Please see these simple pointers to maximize iPad battery lifespan and battery life.
Note: Your iPad is not eligible for Battery Replacement Service if the product has been damaged, for example, as result of an accident, disassembly, or unauthorized modifications, or if the product is not operating correctly as a result of a component failure. Apple may run a diagnostic test to determine whether your iPad qualifies. Please review Apple's Repair Terms and Conditions for further details.
Apple's Limited Warranty and AppleCare Protection Plan benefits are in addition to rights provided by the EU statutory warranty. For details, click here.
Back to top
How much does iPad Battery Replacement Service cost?
Service arranged through Apple costs 99 €. A 11,96 € shipping and handling fee will be added if this serivce requires shipping. All fees are in euros and include VAT.
Back to top
How do I arrange iPad Battery Replacement Service?
Battery replacement service may be arranged through Apple. Please do not send any accessories with your iPad.
Back to top
Will the data on my iPad be preserved?
No, during the service process all data on your iPad will be erased. Before obtaining service, it is important to back up your data using iCloud or iTunes. Apple is not responsible for the loss of information while servicing your iPad and does not offer any data transfer service.
Following service your replacement iPad may have a newer operating system (iOS) version and you will need torestore your data using the method used to back it up (iCloud or iTunes). As a result, you may also need to update your App Store applications to ensure compatibility with the newer iOS. If you experience a problem with an application purchased from the App Store, check iTunes to see if an update is available or contact the application vendor directly.
Back to top
How long will it take to receive my replacement iPad?
If you arrange service through Apple, you can expect service to be completed within approximately five business days from the time you send your iPad to Apple.
Back to top

3rd gen battery replacement and life after

After 3 years, the battery on my 20GB 3rd Gen iPod is finally failing. I'm stuck between sending it in for battery replacement or just buying a new iPod.
For those of you who have sent in a 3rd gen for replacement--how was your experience with the replacement iPod? Did you get the same 3-4 years generally expected from the model, or did it deteriorate faster? Is it worth the $65 , or should I just suck it up and spend more on a brand new iPod?
20GB 3rd Gen iPod Windows XP

By all means replace it! The 3G is a great device if what you want to do is play music!
Yes, if you do it yourself and fail to follow the instructions by popping the right side first, you can and will rip the ribbon cale to the headphones. But that's why one should follow instructions or have a pro do it
Should you send it in to Apple for the $65 job? That's up to you. There are 3rd party folks who will do it for less or will use a better battery. I replaced my own with a higher capacity battery, and have wonderful play time. One company I've dealt with is iPodResQ. I'm not making any money from this recommendation, just voicing my approval of the quality and price of their parts and services.
Look around, google 3G iPod battery replacement, read the instructions. If you feel uncomfortable with them, then get a pro to do it.
I've has several folks want to buy my 3G from me because of its distinctive appearance. Seems it's already "retro", and therefore cool. So why ditch it because of the battery? If that's the only reason you are thinking of replacing it, then don't. Benefits of the 3G include the fact that Dynamic playlists still work on them, unlike newer models that traded that function for the benefit of podcasting. That alone is enough for me to keep mine.
For the record, I own a 15GB 3G that is my go everywhere workhorse, and a 40GB 4G that goes with me on trips with most of my library. I like the 3G more.

IPhone 5 battery replaced...but it's still not great

I have had my faulty iPhone 5 battery replaced as part of the apple programme, and it is better, but...I have to say it's still ot exactly brilliant.
Has anyone else got any experience to share?

http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-ios-batter y-drain
also recalibrate your battery.

6180 storage battery replacement

Hi Experts,
I have a simple question.
On 6180 controller ,A battery has been failed. and B battery nearing expiration date(24 day remaining).
At this moment we have IO performance problem. Now we are waiting the new batteries shipment.
As shown on service Advisor, I will offline the controller and will proceed the battery replacement.
Question: If I change the volumes owning controller from A to B , would it affect to IO interrupt,
I have a trouble data loss. OR I should stop the services?
What can you recommend?

RESET BATTERY AGE PROBLEM (SOLVED)
I've resetted the 4 storage's batteries.
But one of the storage (6180) battery reset was not successfully. After that I replaced with new battery. Showing status charging,then learning. After 1 hour again near expiration.
I have doubt, this is a bug.
Then I found the solution from here ( https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=361066283002794&id=1021695.1&_afrWindowMode=0&_adf.ctrl-
Some array firmware have a bug which prevents the reset of the battery timer.
Action :
Log to the CAM server as a user with a storage role.
List the registered arrays and use the name of the affected array as "<arrayname>" in commands below: sscs list array
List the array date: sscs list -a <arrayname> date
Change the date and time of the Storage Array to two days (+48 hours) from the current date. sscs modify -a <arrayname> date mmddHHMM
Verify the array date: sscs list -a <arrayname> date
Reset the battery age: service -d <arrayname> -c reset -t t85bat1 service -d <arrayname> -c reset -t t85bat2
Synchronize the array clock with the CAM server: sscs modify -a <arrayname> -s date
Confirm that the array clock is synchronized with the CAM server: sscs list -a <arrayname> date
Example with Storage Array name "s-st6540-tvp540-a" and date of August 2nd 9am.
# ./sscs list array
Array: s-st6540-tvp540-a
# ./sscs list -a s-st6540-tvp540-a date
Date: Fri Jul 29 09:57:22 2011
# ./sscs modify -a s-st6540-tvp540-a date 08020900
# ./sscs list -a s-st6540-tvp540-a date
Date: Tue Aug 2 09:00:51 2011
# ./service -d s-st6540-tvp540-a -c reset -t t85bat1
Executing the reset command on s-st6540-tvp540-a
Completion Status: Success
# ./service -d s-st6540-tvp540-a -c reset -t t85bat2
Executing the reset command on s-st6540-tvp540-a
Completion Status: Success
# ./sscs modify -a s-st6540-tvp540-a -s date
# ./sscs list -a s-st6540-tvp540-a date
Date: Fri Jul 29 09:58:44 2011

Battery replacement in PXI-8187 controller (part no./procedure)

Similar Messages

Maybe you are looking for