Battery running out fast om 5.0.1, also no zoom in camera, how can I fix that? Anybody?

Since updating my phone to 5.0.1, it seems like the battery runs out FAST!  Just sitting....Also the zoom doesn't work on the camera. I tried "pinching the screen" but I think with the case on it, that doesn't work, tapping twice doesn't work either.  Don't like these changes!  Very annoying.  Phone was fine until they recommended updating....Folks, don't do it if you haven't ......not until they get the bugs out.  Any way to go back to the last operating system, without going crazy?   anybody?

Have you tried basic troubleshooting techniques?v I have IOS 5.1 with no problems

Similar Messages

  • If i export my project, it runs much faster than in the canvas. How can I fix that?

    If i export my project, it runs much faster than in the canvas. How can I fix that?
    I'm from germany, sorry for my english!

    When you export your project, it is "compiled" into video format. Any player will play it at its frame rate.
    Motion is a compositing application. It has to make many more times the calculations needed to animate everything and 90% of the time, it's just not possible for Motion to keep up with "real time".  It's to be expected. Learning to live with that fact will make life a lot easier for you, I promise.
    There are a few things you can do to help speed up Motion:
    Reduce temporary play ranges to no more than about 5 seconds at a time. You can move the Play Range In and Out markers from section to section. Motion does all of its real time rendering in RAM. The longer the play range, to more it has to work managing that memory.
    Remove Preview Icons from the Layers list ( View menu > Layers Columns > Preview will toggle the views)
    When you play your animation, turn off on screen guides: (command - / will toggle onscreen guides)
    In Motion 5, reducing the quality of playback from the Render menu does not make a lot of difference anymore, so you might as well keep the default settings of Dynamic, Full and Normal on. However, Motion Blur, Frame Blending, Field Rendering, as well as the lighting options will affect playback, sometimes by quite a lot. So if you have Lights, turning off Lighting, Shadows, and Reflections will get back a lot of real time playback speed (just remember to turn on all that you need before rendering, or these things will be left out of the export!)
    HTH

  • My computer with Windows 7 says there is no iPod when I run diagnostics on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    My computer with Windows 7 says there is no iPod when I run Device Sync diagnostic test on my iTunes, even though my iPod shuffle is in the dock. How can I fix that?

    Hi there JMW1973,
    You may find the troubleshooting steps in the article below helpful.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    -Griff W. 

  • I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    I've been using my cell phone number to imessage from my ipad for a while now, but yesterday I got signed out of I message and when I signed back in, I didn't get the option to use my number, only my email adress. How can I fix that?

    Hey bill.rizzo2,
    Thanks for the question. I understand your phone number is missing on your iPad as an option for iMessage. The following article provides steps to resolve this issue:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Phone number missing on iPad or iPod touch
    If your phone number isn't listed on an iPod touch or iPad, follow these steps:
    1. Update to the latest version of iOS.
    2. Verify that you're using the same Apple ID that you're using on your iPhone.
    3. On your iPad or iPod touch, sign out of your Apple ID in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    4. Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number still isn't listed, follow these steps:
    1. Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
        - Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
        - Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    2. Sign in to your Apple ID on your iPhone.
    3. When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and Settings > FaceTime.
    4. Sign in to your Apple ID on your other iOS devices.
    Thanks,
    Matt M.

  • I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this?

    I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2.  How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

    What computer do you have?  is it 32 or 64 bit operating system?

  • The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that?

    The video sound faster than video ipad mini, this happen when I download the iOS 7.1 to my iPad mini, how can I fix that? Or just wait till Mac release a new version update, also some game and apps doesn't open or when open they close, please help!!!

    Start by closing all apps and resetting your iPad and see if that helps with any of your issues.
    To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close all of the apps on the iPad this way.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Why does my battery run out fast?

    My battery on my iPhone 4S is always running out fast. I have to charge it multiple times in a day. I delete the running apps, but it still doesnt work.

    Maybe because you never put it down.
    Maybe because you never allow it to go to sleep.
    Maybe because it is constantly checking email.
    Possibly because some app is running using location services.
    Try a search of the forums for battery issues, you'll find many threads with steps that can be taken to mitigate battery usage.
    Depending on what I'm doing... I can easily make it through a full day on a single charge or completely drain the battery in about 6 hrs.

  • I tried to run the firmware update and then my mac stopped working.. How can I fix this?

    We have two brand new mini macs at our office that we are tyring to install updates on. One worked no problem, and we attempted to do the same thing on the second and there are issues. After I attempted to update the firmware my mini mac appears to still be running, light is on and it sounds like it is running, but nothing is starting up. How can I fix this?
    Thank-you,
    One incredibly troubled and migraine induced receptionist.
    Deanna.

    Try (but I do not expect anything)
    Press Option during startup
    Start up in Startup Manager, where you can select an OS X volume or network volume to start from. 
    Next try:
    Press Command-R during startup
    Start from the OS X Recovery System1
    and if successful use the Disk Utility to repair the boot disk
    OS X: About OS X Recovery

  • My iPad Air turned slower than before i upgraded to iOS 8.0.2 and waste a lot of battery how can i fix that?

    My iPad is slower with iOS 8.0.2 and the battery last lesser than before. Is there any solution for that? Thanks

    Do a reset to factory default with your iTunes program. Always make sure you do your backups first. And after you do that you'll also get the NEW revision today with the bug fixes ... iOS 8.1!
    Report on the NEW iOS 8.1 Revision Today
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • Back/ forward buttons and refresh buttons have greyed out and don't work, how can I fix that?

    Woke up this morning to find firefox's back/forward buttons and refresh unresponsive. They are just greyed out. Also, when I open Firefox it usually goes to my home page, now it just opens to an "untitled" page. I tried resetting the home page, only to find it was set correctly. The only way to get to the home page is to hit the home button. The only thing that happened overnight, that I can see, is updates on 'screenshot-program' and 'smarterfox.' I don't know what to do about it, please help?

    See http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • On my ipod touch the screen went out and I want to transfer my stuff to my iphone, how can I do that if Im not able to put in a password?

    please help its including important school information. I was planning on getting a new ipod but it was to late.

    It iTunes is asking to enter the passcode then:
    - A data recovery company may be able to help
    - Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone.

  • HT4642 I have an older Imac.  It is running OSX 10.6.8.  We have two new Ipads and wish to open and use a spread sheet developed on the Imac.  Currently I can open the Spread Sheet but cannot make any entries. How can I fix that problem?

    I wish to use Spread Sheets developed on my Imac (OSX 10.6.8 with Numbers 08) on my new Ipad Mini.  Currently they will open but I cannot make entries.
    Is there some software I need to download to my Ipad ?
    If I update my Imac Numbers 08 will it still work with existing spread sheets ?
    If I upgrade my OSX 10.6.8 will it impact my files originated under my old OSX and will all my programs work?
    Is there a work aropund that will allow me to use those Spread Sheets on my Ipad ?
    As informative as Apple is with their products, I see little that addresses compatability issues.  Art they non existant ?
    I hate to make any changes unless I know I am not going to be causig a lot of grief!
    Any assistance would be appreciated.

    On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
    Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
    I don't know what to make of this.
    Peter R

  • I experienced the same prob with Yosemite where my screen went black on startup. I was able to "fix" it and log into my qccount but my mac is running super slow now even just at simple clicks and commands. How can I fix this? Help please!

    I updated to Yosemite and everything worked great for a few days until earlier. My mac was plugged to my TV via HDMI wen everything hanged. I did a hard reset and the screen was just black during startup. There were the startup sounds but no images from the screen. it did have images at one point where it gave me options to reset my password. I did a couple of hard reboots and pressed Alt/Option or Cmd+Option+P+R based on previous posts. Didnt know which w but I was able to access my account and log in. My big problem right now is that my Mac became super slow. Even at the simple commands/clicks

    My mac was okay up until a few hours ago. If anyone knows how to fix this, would really appreciate your help. Thank you!

  • Certain websites are not running on my Macbook Air how can I fix that?

    I was trying to get on LouisVuitton.com and it would not load, the page would just be black.

    You won't be able to do anything with that page without installing the latest Adobe Flash Player.
    Download Flash Player using this URL: http://get.adobe.com/flashplayer/
    Step 3 is just advertising. Skip it.

  • I want to print large enough so I can read with out using a magnafying glass because Firefox prints are so small how can I fix this

    Every time I print whether it be coupons, or anything from the web the printing is so very tiny you can hardly read it. I use Firefox because I like it ... I don' t want to have to change back to internet explorer but I will if this can not be fixed.

    By default, Firefox will "shrink to fit" when printing. You may need to choose Landscape mode for some sites. Depending on a site's design, you might be able to enlarge text instead of shrinking. I suggest using the controls in Print Preview to experiment with different options. Does that help at all?

Maybe you are looking for