Battery -- sorry if it has been asked before

Hello
I have searched the forum but can't find the answer, how long does it take to recharge your battery when you have plugged it into your PC?
thanks.....
I have the 30gb ipod (just incase you need to know)
x

or actually..i dont think u can..but im not sure..cause if u listen when its charging, it will probaly take like 6 hours for it to recharge or something...or the batterie becomes bad..

Similar Messages

So, I know this has been asked before. But, has anyone heard from Apple?

So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
Anyways, thanks for any help !

Wow, easy there company boy!
I've heard all of what you spit up before. And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play. (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"." Again, I don't want it on muteReading your post made my eye twitch at least three times.
This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

Contact Form - I Know this has been asked before. . .

Hello
I know this question has been asked before! But even searching the forums hasn't got me the direct answer i am after.
I need a 'Contact us' form on a website and i have come across posts with people who have got part way with one and needed help - but i need one from scratch. .
I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has??
All help will be greatly appreciated. . .
Thanks

I have been told by 11Mystics that 'VaskGirl' can help me with a tutorial she has?? [sic]
"Varkgirl"
http://iweb.aardvarkland.com/
Mark

I know this has been asked before But I Deleted 6 mths worth of Bookmark folders, Cant use Undo,

I know this has been asked before But I Deleted 10 mths worth of Bookmark folders, Cant use Undo & havent backed up (live & learn) Someone posted do a restore from "Import & Backup" My listing in Restore is only 2010-6-29 back to 2010-6-22. Is this the way to go to retrieve as much as possible or is there another solution?

Those dates are when a backup was automatically made by Firefox, not dates when you saved specific bookmarks. Try restoring the backup from the day before you deleted all those bookmarks. It will restore the entire backup file - not just what you deleted, you will lose any bookmarks that you saved after the date of the file you restore.
[https://support.mozilla.com/en-US/kb/Lost+Bookmarks]

I know this question has been asked before a long time ago but NO Answer

Hello, This question has been asked before but no answer so I thought I'd ask it again since it's been a few years..
How can I replace the folder icons in a Picture Library with a thumbnail of a photo in a folder? I know I can do something very similar in the 'getting started' list by using a 'Promoted Links List' does the picture library
use the same type of methold? I'd like to see a thumbnail of one of the photos instead of a yellow file folder.
Thank you,
Joan

I'm a bit of fan of: lapointes add-ons.
If you have these installed (free of charge) it is just a powershell command. (set-spolist)
check: http://www.falchionconsulting.com/PowerShellViewer/Default.aspx?Version=SPO&Cmdlet=Set-SPOList
ImageUrl
False
String
Sets a value that specifies the URI for the icon of the List.
Good luck!

Bluetooth. This has been asked before but no answer.

Why is there no function in Siri, or other app, to switch on/off wifi and bluetooth on the iPhone. It's such a pain especially when in the car.

There has been no answer because we're not Apple here, just users like yourself. We have no idea as to why Apple does or doesn't do something. Speculation is strictly forbidden by the Terms of Use of this forum.
Feedback to Apple goes here:
http://www.apple.com/feedback/iphone.html

Is there any way to increase the contrast of the slider in the Table of Contents? It becomes very hard to see as you slide down a presentation. This has been asked before, a few years back. Has a solution been provided?

I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.

I designed an interactive script using Captivate 7. It works like a branching scenario, and is currently in use by about 350 phone operators, soon to be over 750. Everybody is pretty happy about it, but I am getting complaints - especially form the older people - that the slider in the TOC is very hard to see, and I agree - as you scroll down the TOC entries, the slider becomes lighter and lighter in color. Is there any way to tweak it so that I can increase contrast, or recolor it in a darker tone? I know this was discussed a couple of years ago, but I don't know if the issue was addressed by Adobe, or if anyone has come up with a solution.

My client wants me to setup email address through BC. Please can someone advise me how to obtain new email addresses and manage it through BC? And sorry if it's been asked before...

Sorry, I'm new to BC and need to establish the best way to obtain and use new email addresses for my client. The site is created in Adobe Muse and I wish to host it with BC. THANK YOU!

You need to be on an upgraded BC plan to at least a webMarketing plan to be able to set up email with it. I don't recommend the BC email anyways. Here is a blog article I wrote some time ago on getting around the BC email limitations.

I know this has been asked before...

After about nine months, my Northbridge chipset fan has gone from simply noisy to an irritating vibration. I know that the Zalman Fanmate 2 will slow it down to 5000 rpm, but it sounds like the fan is on its way out. I'm reluctant to spray it with WD 40 because I don't want to remove the fan unless I'm going to replace it. I did e-mail tech support at MSI and they probably will send me a new fan. What are some other good aftermarket options? I appreciate any advice that people can offer. BTW, other than the fan, I've had no problems with the board, which is about as good as you can get without going to SLI.

Will it fit on the Neo-4 Platinum? It seems to me that I have a few options here:
(1) Buy a Zalman Fanmate 2 and turn down the fan. It used to run regularly at 7,670 RPM, but lately, it's running at 8,000 RPM+ and is rattling things. Yet, Speedfan says the temp of the Northbridge is 17 or 18C, so it's not overheating.
(2) Buy a general four channel fan controller. I like the Zalman that fits in the 3.5 bay, but my case has a plastic door that closes, so I may need one with just push buttons. Any advice on that is appreciated. The problem with that idea is that the back fan is a 120mm Antec Smartcool and the front is the Antec 120mm that came with the case set on medium.
(3) Buy a Vantec Iceberg copper heatsink and fan, some Arctic Silver 5 and the Arctic Silver clean kit, pull the motherboard out (next time I get the case with a removable motherboard tray) and install it.
(4) Buy this(http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=872908&CatId=99) or (http://www.quietpcusa.com/acb/showdetl.cfm?&DID=8&User_ID=760103&st=7443&st2=-49144413&st3=35057438&Product_ID=91&CATID=5), cut some pins off with my Dremel Moto-Tool and install.
(5) Buy this (http://www.quietpcusa.com/acb/showdetl.cfm?&DID=8&User_ID=760103&st=7443&st2=-49144413&st3=35057438&Product_ID=359&CATID=5), cut some pins off--probably still won't fit though--and install.
My video card just clears the Northbridge but probably can be worked around. Next to it I put an Antec blue LED cyclone blower to help keep the card, and the system, cool. On high, it's still not that loud. Even with two 120mm Antec fans, the system still hits 41C during gaming. Thanks for the advice so far guys.

I know this has been asked before, but...

I'm having trouble converting a mono audio track to a stereo one. I know you're supposed to extract the audio and open it in QT and export it in stereo, but it doesn't seem to be working. I'm selecting "Export: Sound to AIFF" and "Use: 44.1kHz Stereo." I know I've successfully done this before, but I can't seem to do it this time. Any help? Thanks.

Jeff,
Is the problem that you only have sound coming out of one speaker? If so, you've already got stereo. It's just that your audio is only on one of the two tracks in your stereo pair.
So what you really need to do is export to mono.
Matt

I'm sure this question has been asked before, i bought a iPad 2 from my friend and i hadn't used it for nearly 5 months then i tried to activate it and it says that there a iCloud account linked to it but my friend has NEVER used iCloud. What can i

I just want to know how get rid of a iCloud account from a ipad2 that i purchased off my friend. My friend has NEVER used iCloud so i don't know how this iCloud account got linked to this ipad2 and i don't know how to get rid of it? Please help.

If your friend is the iPhone’s original owner, tell them to take the device and its original purchase receipt to a physical Apple Store.
If not, but you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If neither of the above applies, you can't activate the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(116323)

Ok I know this has been asked before but....

OK AFTER I MADE MY OWN RINGTONE AND THEN DRAG IT OVER TO MY IPHONE....I SEE IT IN MY RINGTONE FOLDER BUT IN THE IPHONE UNDER SETTING IT DOESNT SHOW AND I ALSO HAVE TWO OF THE SAME RINGTONES THAT WAS ALREADY THERE!!!!
IM TOOOOO LOST I BEEN FOOLING AROUND WITH IT FOR LIKE 3HR NOW TRYING DIFFERENT THINGS....WHAT AM I DOING WRONG??
PLEEEEEEASE HELP!!

Well since the only official way for ringtones is to buy them, it is hard for us to help you since you really didn't tell us how you tried to circumvent the only officially supported way.
And as mentioned, turn off caps lock.

Sorry if this has been posted before but...

..are all the video editing effects such as lighting, fog, faster/slower/reverse, etc available in iMovie '08? I use these effects heavily in movies I make, and it would be a huge turnoff for me if they're not included. I'll probably end up just getting Final Cut Express if they're not

.....so that novice movie makers can quickly create short movies with a background sound track and post it to YouTube or iWeb without spending lots of time to make a creative longer movie.

Dark Epson prints. Yes I know it has been asked before!

Having invested in Lightroom 2 (and now 3) and Photoshop CS5 I am starting to get to grips with them.
However I cannot get them to print correctly with my admittedly ancient Epson R300.
For color management:
I have tried managed by printer and various settings of color management within Epson (color controls and photo enhance)
I have tried Epson profiles in Lightroom or Photoshop and colour management switched off in Epson (ICM and no color management)
None work fully satisfactorily; mainly they are too dark and none are close to the screen image and the real image in terms of colour. I take photos in Raw format and have even tried saving photo in jpg format through lightroom and then opening jpg and printing the jpg but still not good.
However if I open jpg in my old freebie Photoshop Album Starter edition 3.2 and print hey presto a reasonable print!
Why can my super sophisticated Adobe products not print pictures correctly that my free Adobe product can?
Any suggestions grateful recieved

thanks for reply
whilst display is not calibrated the picture on screen is a fair representation in terms of colour and i can print that "fair representation" via photoshop albulm or, in fact, through online commercial digital serivces like photobox or even windows photo viewer. It is just a problem with lightroom or photshop cs5

I know this has been asked before, but still can't work out how to merge a split album

I've read all the guidance, but can't even find the buttons to push!
I am using the latest itunes for windows
Thanks,

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Battery -- sorry if it has been asked before

Similar Messages

Maybe you are looking for