Battery Status Level In Desktop Manager Does Not Agree With Battery Level Indicated On My Curve 8330

I just got a new Curve 8330 from Verizon.  It came with a Desktop Manager 4.3 disc.  I installed it, but then learned that version 4.7 was available.  I uninstalled 4.3 and downloaded and installed 4.7 from RIM.  When I started to charge my Curve via USB cable to my PC, the Desktop Manager showed a battery charge of 37%.  My Curve was 100% charged later in the day, but the Desktop Manager still indicated it was only 37% charged.  I uninstalled 4.7 and reinstalled it, per advice of Verizon.  Then the Desktop Manager correctly showed a battery charge of 100%.  But as I used my Curve and used up battery to a 50% level (as indicated on the Curve), the Desktop Manager still showed a 100% charge.  A minor glitch with the Desktop Manager software?  Any solutions?  Thanks.

it's a glitch. The(false) value can be updated by going into the Help menu if I recall correctly.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • Desktop Manager does not connect with Storm

    Help - I have my head halfway inside a gas oven in sheer desperation.   I have been trying to get the BlackBerry Device Manager on my PC to recognise my Storm for a week now.   I have uninstalled and installed it a trillion times with no change.   I have tried the USB in a number of different sockets.   Today, I took my Storm back to the phone shop.   Their PC instantly recognised the Storm using the same USB cable!   Can someone please tell me what is going wrong and/or how I can remedy the problem without a hammer?  
    Solved!
    Go to Solution.

    tcq wrote:
    Hi - thanks for replying.   I'm using 4.7 and XP Pro.
    ok, cool.
    So, with DM 4.7 installed, you connect the BB to the USB cable... and you THEN open Desktop Manager. 
    What happens?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Desktop Manager does not show Media Manager

    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Solved!
    Go to Solution.

    mamapajama wrote:
    First, let me say I am a NEW Blackberry user, my hubby and I both got new Blackberry Curves 8310 recently.
       When I installed the disc that came with the phone, the Blackberry Desktop Manager does not have the "Media Manager" as one of the choices, as was shown on all of the booklets and tutorials. I even re-installed the program, thinking maybe it didn't download completely the first time, but it still comes up showing only these 4:
             Synchronize, Backup & Restore, Application Loader, and Switch Device Wizard.......
    All of the directions I've received show that I can easily add pictures and music simply by clicking on Media Manager, but it just isn't there.
    Here is info about the installation disk that we received with our phones, supposedly the correct and latest versions . . ..
    Blackberry Desktop Manager
    version 4.3.0.17 (Nov.12 2007)
    Device Communications      Blackberry Device mgr....4.3.0.7
                                             BBDevMgr   ................4.0.0.1
                                             RIM USB Driver.............4.0.0.2
                                             RIM USB Serial Driver.......2.1.0.4
    Application Loader          Application Loader ..........4.3.0.13
                                         RIMProgram .....................1.0.0.35
    Seriously, none of these really means a whole lot to me, I just want to click on something and have it work . . .  I did try to "upgrade" to a newer version, and I got the message that the version I had was the newer one, so now what?
    I have memory cards inserted in the phone(s).
    I will appreciate any help with this, I'm really frustrated. I figured out how to move files manually, but I don't understand why it isn't showing up as illustrated in the instruction manuals and online tutorials.
    Hi...
    I can help you with the download link...
    The link is here
    When you get to the page that has the downloads, pay attention to which version your downloading as some have media manager (near bottom) and some do not have media manager (near top)
    Let us know how your doing...
    Do you have XP or Vista?
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • Desktop Manager does not recognize USB Connection

    I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
    When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'.  I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
    file:///Users/Nigel/Desktop/WaitingForUSB.jpg

    I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8.  It recently stopped recognizing the USB connection as well.  I was able to sync my BB with the MAC but can no longer do so.  The MAC mounts the BB and I can access the SD card.  What gives here?

  • Desktop Manager does not show blackberry connected

    I find this desktop manager is NOT set up for the average computer user and just wants you to PAY. As I was quoted $650.00 for one year of support. I will go back to Motorola before I pay that amount of cash. The Motorola software is user friendly and support was FREE. The only reason I got a BLACKBERRY is I won it and I broke my Motorola and needed a new phone anyway.
     I have had this paperweight for two weeks and am very tempted to recycle it. I have installed this software twice and reinstalled it twice and every time I try to connect it to my computer the Desktop Manager does not pick up my Blackberry it shows Disconnected yet I have to go to safely remove hardware to disconnect it and it shows in there

    I would suggest you use the following procedure to do a clean install of the 4.3 software and download 4.5
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=SAL_Pub...
    I use this version and it is very stable with XP.
    Here is the link for DM 4.5, I would STONGLY advise against downloading the media manager as it media not stable.
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Please let me know if you need any further assistance!
    Thanks,
    Message Edited by Bifocals on 09-02-2008 05:06 PM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Blackberry Desktop Manager does not detect my phone

    My computer detects my phone when I attach it, but Desktop Manager does not, so I can't manage my phone.

    Hello Flowergirl0044,
    Have a look at the following article on how to force the detection of the BlackBerry® smartphone using Application Loader to reload the OS http://btsc.webapps.blackberry.com/btsc/KB10144
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT204053 my desktop mac does not sync with iphoto

    My desktop mac does not sync with the phots i take on my iphone

    Your profile suggests you are running 10.6.8 and cannot therefore use iCloud or photostream.

  • Error  " Selected numbers does not agree with transferred"

    Hi,
    While in production support I got a issue saying
    Error  " Selected numbers does not agree with transferred"
    How to solve this.
    Regards
    San Reddy

    Hi,
    This doesnt mean that its a failure.
    I will suggest you to check a few places where you can see the status
    1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
    Also see if there is any 'sysfail' for any datapacket in SM37.
    2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
    3) RSMO see what is available in details tab. It may be in update rules.
    4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
    5) SM58 and BD87 for pending tRFCs.
    Once you identify you can rectify the error.
    If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
    If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
    If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
    SM21 - Job log can also be helpful.
    In your case its probably because of tRFC issue.
    Check SM58 / BD87 for pending tRFCs.
    Thanks,
    JituK

  • BW:  Data Packages Selected number does not agree with transferred

    Hi,
    I am running into an issue with an existing master data text load process chain in Production.  The extractor is from ERP and there are only 159 records.  What is happening is the chain is stuck on yellow but there is an issue with the data packages.  The status error message is 'Missing data packages for PSA table'.  Clicking into the Details tab the message then states Data Package 1:  arrived in BW; Processing:  Selected number does not agree with transferred.
    The version is BI 7.0.  I have done the following steps and still no luck.  Looking for any suggestions.  Thanks.
    ERP
        SM37 (Job always finishes)
        SM58 (No IDOCS stuck)
        ST22 (No short dumps)
    BW
        SM58 (No IDOCS stuck)
        SM37 (Job always finishes)
        ST22 (No short dumps)
    Reactivated Datasource:  RSDS_DATASOURCE_ACTIVATE_ALL
    Reactivated Transformation:  RSDG_TRFN_ACTIVATE

    Hi
    Just check whether source system connection is ok in RSA1.
    if it is fine then have a loo at the below thread(last post)
    Data Load from R/3 to BW-'Selected number does not agree with transferred'
    Regards,
    Venkatesh

  • Error: Result of agent resolution does not agree with agents of task

    Hi,
    I'm getting the error "Result of Agent Resolution does not agree with agent of Task".  I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
    Regards,
    JMB

    Hi
    Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
    You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
    Regards
    Waz

  • Result of agent resolution does not agree with agents of task

    Hello Experts,
       I am trying to configure a workflow for Employee Travel expense, the Business object am using is BUS2089 for event CREATED.
      And am configuring workflow task WS20000040 (Approve trip). and in the work flow builder I am assigning User as an Agent and fixing it to a user say "USER1" for Task 404 (Check trip facts) and for Task 416 (Approve trip facts) again am assigning User as an Agent and fixing it to user say "USER2"
    Now when the Trip is saved using PR05, this work flow is triggerred - which is what i want and it sends work item to USER1,  now when USER1 says Trip facts are consistent the work item should go to USER2 but here it is failing and the log says "Agent determination for step 0000000416 failed" and details say "Result of agent resolution does not agree with agents of task" which is  SWF_RUN 544
    Can you guys help me by telling where am going wrong.  Am i missing some configuration somewhere.
    I have changed the Task properties - Attributes i have changed the task as a General Task,(i did it by navigating through Control Tab of the task)
    appreciate your response.. Thanks
    Usman

    Thanks Novjot
        I made the task as a general task and i see a gree light adjacent to it, but still it doesn't work.
    the way i made it as a general task is as follows:
    1. in the navigation area - select task 416
    2. In the right hand side, on Control Tab in Task properties, click on the Red button and maintain Agent assignment
    3. In Agent Assignment change attributes to General Task - instead of General Forwarding allowed.
    save and activate, and generate runtime version
    Is this correct or any other way?
    Thanks
    Usman

  • Agent resolution does not agree with agents of task

    Hi Guys,
    I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
    The workflow gets triggered correctly when we get the inbound error.
    In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
    <i>" Result of agent resolution does not agree with agents of task"    </i>  
    <b>Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.</b>
    I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
    Nothing seems to work, anyidea as to what's happening here ?
    Message was edited by:
            Abhishek Dhoundiyal

    I have tried :
    1.) hardcoding user ID
    2.) using a role
    3.) using WF initiator...
    This is set up as a general task......
    One interesting observation that i had... (If the below is irrelevant please ignore)
    If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
    Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

  • Field catalog does not agree with the fields of the functional area

    G'day everyone,
    I am using a generic extractor via infoset to extract data from R/3 source system.
    Using RSA3, I have obtained an error message and no further details.
    ****ERROR MESSAGE
    "Field catalog does not agree with the fields of the functional area
    Message no. RSUQ134
    ****ERROR MESSAGE
    I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
    In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
    Anyone knows how to get more details for this type of error? Or how to fix this problem?
    Regards
    Wayne

    I think I have just solved it.
    Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
    Cheers

  • Desktop Manager does not connect to Blackberry Torch 9800

    Desktop shows "connecting" then eventually shows error message.
    Connections between device and computer are good.
    Batteries in both device and computer are charged.
    Have had problem since new  hard drive in computer installed.
    HELP!

    Hi and Welcome to the Community!
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
    KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
    KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed 
    KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
    KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
    KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • CC Desktop app does not populate with apps, just an empty window. I have reinstalled with no luck.

    Unable to download any CC content since the CC desktop app does not show any available. The app worked for a while and I did download some programs but now it isn't working at all. Is there a fix for this or another way to download apps, specifically Encore?

    Hi there, are you still experiencing this problem with the crossword app? From your post I'm assuming that it is an intermittent problem and the app prints OK some days but not on others? Is that correct?
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

Maybe you are looking for