Battery suddenly stops working - computer shuts off despite battery saying its charged.

I have a HDX16 laptop running windows 7.
The battery is a year and a few months old, and yesterday was giving me at least 50 min of battery life. However today, it wont hold a charge at all and my computer shuts down completely whenever the power supply is interrupted for a millisecond. I ask because this is the second time a battery has suddenly stopped working on me and I am wondering if there is a reason for this.
I tried to check the battery condition by hitting esc + f2 when my computer starts up, but there is no battery check option.
Any explanation or advice would be greatly appreciated Thanks for your time. 

Hey Aitchpk, 
I'm sorry you're having a battery issue. I would suggest running a battery check using HP Support Assistant if you have it installed on your computer. 
You could also try using this standalone Battery Check.
Do you have any issues like this if you operate the computer without the battery and just have the power cord plugged in?

Similar Messages

  • Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

    hi

    Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to  Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
    I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
    Could someone please help? It'd be VERY much appreciated.

  • My apps stop working at shut off after five minutes

    I will be on an app and after using it and searching on it for awhile it will just shut off and close and take me to the home screen

    I am have just started experiencing this as well. I have been looking all over for an answer and can not wait to have someone answer this. 10.6.8

  • Sound suddenly stopped working.

    Hi, my sound on my HP ENVY 15 Notebook PC just suddenly stopped working the other day. Everything says that it is functioning, and my drivers are up to date, but I cannot seem to get the sound to work out of my speakers or out of headphones. 
    Product Number: A9P60UA#ABA
    Running Windows 7 Home Premium 64-bit
    If you could help, that would be wonderful! Thanks!

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56900.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete,download and reinstall the Chipset driver on the link below.
    Chipset Driver - Windows 7.
    When this has completed, shut down the notebook, unplug the AC Adapter and then hold down the Power and Beats buttons for 10 seconds.  When done, reconnect the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hi, my ipad mini has suddenly stopped working and I cannot turn it off or connect it to the computer, can anyone help me on this??

    Hi, my ipad mini has suddenly stopped working and I cannot turn it off or connect it to the computer, can anyone help me on this??

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
    http://support.apple.com/kb/ts1827
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My phone is dead (no it is not the battery).  It suddenly stopped working.  I tried pressing the on/off button to no avail. What is up with this?

    My phone is dead (no it is not the battery).  It suddenly stopped working.  I tried pressing the on/off button to no avail. What is up with this?

    Press and hold down for at least 10 to 15 seconds, both the home and power/sleep buttons until the Apple logo shows up on the screen.
    This will reboot the iPhone.
    Its likely the iPhone crashed, and you need to reboot it. No data should be lost though.

  • My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
    Those tests determine whether:
    a) Your Mac software had stopped working  OR
    b) Only the display had stopped working
    If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
    If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
    ¿Software was still running?
    --Yes, the problem is ONLY in the display subsystem
    --No, this is a computer-wide problem such as a kernel panic

  • My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

    Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
    Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

  • TS1702 My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    My Kindle app suddenly stopped working on my iPhone 4s. All my software is up to date and I have restarted the phone, uninstalled and reinstalled the app and it still opens and shuts down instantly. Any ideas?

    We need clarification here.
    Please don't just state version numbers, also state which software.  iTunes 10.7 requires OSX 10.6.8 or higher.  Leopard is OSX 10.5.8.  You have two alternatives right now.  One is to stay with Leopard for a while (ultimately you should upgrade) and install iTunes 10.6.3 which is the last version to work with Leopard.  This should work with iOS6 on an iPhone4.  The other is to call Apple and order OSX 10.6 (Snow Leopard) and upgrade the computer to 10.6.8 which will allow you to run iTunes 10.7.  The caveat is we know nothing about which computer you run and if it even can run any system higher than Leopard.
    Here is iTunes 10.6.3
    iTunes 10.6.3 - http://support.apple.com/kb/DL1575
    If you want to try upgrading:
    Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About this Mac" and "More Info..."  Copy and paste the information here, but omit the serial number and Hardware UUID (if present).  If it says something about Intel or Core Duo or Core 2 Duo in the processor you can upgrade to Snow Leopard (assuming you have sufficient RAM/"memory").  If it says PPC or PowerMac, you cannot.
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. 
    It would help when posting issues here if you would state exact error messages you see.  "It's still not working!" while a description of the situation does not speed us to a diagnosis of the underlying issue.

  • It all of a sudden stopped working and when I try to click on something my computer just beeps at me. I cant even exit imovie

    My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I quit imovie. Help?!?!

    What version of OS X and iMovie are you using?

  • My computer shuts off suddenly w/o warning

    Hi - I recently upgraded my older white Mac to Lion system and a week or so ago put in a new battery. The instructions for the battery were to put the energy saver/sleep on "never" until the battery completely ran down the first time. After the computer shut off suddenly without the usual "your battery is low" warning, I remembered to put it back on energy saver mode but it's still shutting off w/o warning if I don't keep an eye on it and plug it in before it dies. Any ideas what might be causing this?

    Hi Sharusz,
    If you are having unusual power/battery issues that are leading to sudden unannounced shutdowns, you may want to try resetting the System Management Controller (SMC). You may find the following article helpful:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    You may also want to try re-calibrating the battery again, just in case the charge status is being misreported to the computer:
    OS X Lion: Calibrate the battery in a portable computer
    http://support.apple.com/kb/PH4230
    Regards,
    - Brenden

  • HT1435 My Nano 3rd Generation suddenly stopped working. It is a refurbished, not old (to me) and does not get much use. I put it in my pocket with the head phones plugged in & the power off. Now I get nothing, not even the charging symbol when I try to ch

    Hello, My Nano 3rd Generation suddenly stopped working. It is a refurbished and I do not use it ofetn and keep it on the charger. The one night I leave it in my pocket with the head phones plugged in and the power off. it stopped working. I thought it lost it's charge so I put it back on the charger. Now I do not get the charging indicator. Is there anything I can do?

    Probably needs a new battery. 

  • HT201263 My iPod touch suddenly stopped working. It was fine, but when I went back the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. What should I do?

    My iPod touch suddenly stopped working. It was fine earlier, but when I went back a few hours later, the screen had gone black and I was unable to turn it on. It is now unresponsive and my computer does not recognize it when it is plugged in. I thought it just needed to be charged but there seems to be a larger issue now. What should I do?

    Let your ipod die. Then when it is dead charge it adn turn it back on. After that it should be fine.

  • I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that it needs to connect to iTunes. iTunes says my phone needs to be restored before it will work with iTunes. HOw do i avoid restoring?

    I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,

    I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs.  Any other advice?

  • HT201407 My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.

    My iphone suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can open the iphone itself. please help me.

    My iphone 5 suddenly stops working and asked for activation required. I did restore it thru itunes but it asks me to turn off "find my iphone". How can i disable "find my iphone" if i can't open the iphone itself. please help me.

Maybe you are looking for

  • Looking for some assurances that I haven't made a mistake switching to Mac.

    Bought an intel-powered IMac 9 days ago and love everything about it's look, functionality, etc.. Only problem: I've had a bout of "Application has closed unexpectedly" occcurrances while using Safari (while at AOL.com deleting emails from aol accoun

  • When we run the MRP schedule lines are not generated automatically.

    Hi, In MD04 requirement date is on 5.12.2009.My source list validity starts from 1.12.2008 onwards.When i run the MRP for the material system generates the Purchase requisition instead of the schedlue lines.When i change the source list validity as 2

  • ESS/MSS functional

    Hi all, For sometime now I am struggling for an answer. What does an ESS/MSS functional consultant do! What is the purview of knowledge he needs to have!! Does he needs to know business packages and roles! Does he needs to know enterprise portal! If

  • Need to exclude 0 results

    I have an access database. I have a separate cross tab for every variable in the database. The answers to each variable can be 0,1,2,3,4,5. 0 is actually meant to be "missing". I need to totally exclude 0 from even being read in because the the cross

  • Unknown error -48 and purchased music is skipped please help!

    yeah it waits a few seconds and skips my computer says that the direcory "\ipod control/itunesprefs" is corrupt? i ran chkdsk and that didn't help dell   Windows XP