Battery time and enhancement features

Smartphone’s are known for consuming a lot of battery power and depending on your configuration your phone might last longer or shorter than other phones. This topic contains some advice and info about what you can do to increase your battery time.
When using your new Android phone it will take approximately up to a week or so before the phone settles in its battery usage and power management, depending on applications installed and the amount of content in your phone. It’s worth mentioning that this evaluation that the phone runs in the background at first period of use will happen again after master reset or reinstalling/repairing the phone software. So if you have just reset or reinstalled your phone, this power management evaluation process will run again. So it might at first seem like your phone is consuming more battery power than before the reset, but its normal.
If you have been using your phone for a couple of week and still think that the battery time is a bit too low, here’s some advice that will increase the battery time.
First of all make sure that your phone is running on the latest version of the firmware. You can use PC Companion to check for software updates for your phone.
http://www.sonymobile.com/gb/tools/pc-companion/
Or Bridge for Mac if you’re a Mac user:
http://www.sonymobile.com/gb/tools/bridge-for-mac/
You can also check battery consumption via the menu; Settings > About phone > Battery use, or Settings > Battery, or Settings > Power management > Battery.
Things that can be disabled or reduced when you don't need them: 
Dim the screen
Disable live wallpaper if used
Turn off 3G (WCDMA), 4G (LTE).
Turn off mobile data traffic
Turn off Bluetooth®
Turn off Wi-Fi®
Turn off GPS
By doing this you will increase your battery time. But if you're still experiencing a low battery time you can try the following as proposed by many users on the forum. (Only applies for phones using removable battery)
When phone reaches 50% in battery level turn it off and pick out the battery for a few minutes. Put it back and connect the charger, now charge the phone turned off for about 5 hours or overnight. Start the phone as normal and check if the battery life time has improved.
You can also let the phone drain the battery completely until it turns itself on and won’t start again.
At this point connect the charger but do not turn on the phone, leave it charging while turned off until the battery indicator on the screen is completely filled.
Also make sure that you’re using a Sony original charger.
Battery enhancement features
Extended standby mode
Use the extended standby mode to make the battery last longer. Your Wi-Fi® connection, data traffic and unused applications are then paused when the phone is in standby. You can still receive phone calls, text and multimedia messages. Once the phone is used again, all paused functions are resumed.
You can enable/disable Extended standby mode via Settings > Power management. (Depending on model)
STAMINA mode
It has already been mentioned a couple of times that Smartphone’s use a lot of power, even when you’re not actively using them. All those app’s that you have on your phone may still be running in the background, draining your battery. STAMINA mode is a further development of Extended standby mode and saves wasted battery drain by recognizing when your display is off and turning off functions you don’t need, while keeping the notifications you want. As soon as you wake up your Android Smartphone, everything is up and running again.
Get only the important notices.
With Battery STAMINA mode, Wi-Fi® and data traffic are disabled during standby, but you still receive incoming calls, texts, and alarms. And since everyone has different needs, you can easily customize which app's you want to receive push notifications from even in standby mode. Facebook notifications on or off? It’s up to you.
The STAMINA mode will constantly re-evaluate your usage and update the expected standby time accordingly.
This standby time will completely vary depending on your own personal usage. You may see that when you first start using your handset, the Standby time will be higher than what is expected after you have used the handset for a few days. This is due to STAMINA mode having no previous usage history to estimate from.
If you have a very high usage level, you may only see a slight improvement between having STAMINA enabled and disabled. STAMINA mode is more effective the more often the display is turned off as this is when the power saving features kick in. If the display is rarely turned off, you may not see much improvement in the battery performance.
You can enable/disable STAMINA standby mode via Settings > Power management. (Depending on model)
 - Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

To turn sound off (and on) try holding the lowest right button (#) for a bit longer time. Works with most phones.

Similar Messages

  • I just downloaded iOS 7, and on my home screen at the top the battery, time and service isn't showing up. How do I fix that

    I just downloaded iOS 7, and on my home screen at the top the battery, time and service isn't showing up. How do I fix that

    Hi Michellem_14,
    Have you reset or restarted your iPhone since the update?
    Hold down the home button and the power button until you see an Apple logo
    Release both buttons and the iPhone will restart.

  • LG Cosmos Touch VN270 turns on all the time and kills battery life - how to stop this??

    I lock the phone using the lock button on the side but then I'll notice that the display will come on spontaneously (an hour later or ten minutes later...it varies). I notice there is some symbol flashing (arrows and tiny cell phone icon at top of display)  and when I unlock it I will see a screen for browsing and downloading. This is super annoying because I have to keep recharging the phone even though I barely use it. And I can't find a setting to shut whatever it is off that keeps making it do that.
    It's true that the display dims a minute later but if this is happening all day then it wastes the battery. I can tell because I'm recharging the thing every other day, which I'd really rather not have to do. 
    Solutions??

    Just to add another voice ... I've had the same issue.
    Due to my terms of employment I keep the phone on overnight. Between midnight and 6:00am the backlight comes on and stays on, even though the timer is set to 30 seconds. Once, and only once, I left the volume turned up, instead of vibrate-only, and received detailed instructions on how to set up the email feature. That was not a friendly way to wake up. If I see the back light on, or the Download screen, I can shut it off with the screen lock button. Sometimes it comes back on later. This definitely kills the battery by morning.
    I have worked with various Customer Support people who knew nothing about this issue. They have walked me through the remove battery, reset and reactivate phone, etc. to no success. VZW was kind enough to replace the phone with the same model. The second phone has the same issue.
    The local Verizon store would only tell me to please contact the Customer Service number. The corporate account rep at work has been a black hole, so far.

  • Since allowing my upgrade to happen, I am unable to double press and shut off apps that are now eating up my battery time. It doesn't "wiggle" anymore to allow me to do this. Any help would be greatly appreciated.

    I am a new user and when the phone asked for the upgrade.. I have had a lot of problems. First it eliminated all of my contacts. Also, I use to be able to close open apps to reduce battery usage by holding my finger on the apps until they "wiggled" allowing me to shut the active app off. I cannot do this any more and now my battery time is lasting about 5 hours tops. This is without me using any apps other than answering calls. Can someone please help.

    having apps in the multi-task doesn't eat up battery  http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html
    tips for battery http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

  • So after updating my ipod touch 3rd gen to 4.3.1 i noticed a lag everytime i turn it back on. it stays on the lock screen for minutes sometimes hours. the screen is usually unresponsive the only things usually changing are the time and battery percentage.

    so aafter upsating my touch to 4.3.1 i have noticed everytime i restart the ipod there is a huge lag at the lock screen. the screen only updates itself every three to five minutes only updating the time and battery status. i cannot do anything, usually it will stay like this for minutes sometimes hours. i have tried restoring it and thought updating will fix the problem but it hasn't yet. i currently have ios 4.3.3. recently i had a friend look into the ipod and he told me on a folder called damaged files he found this, 37c3ad com.apple.autowake.plist. how can i fix this?

    Try a manual install following directions in link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD  

  • HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong

    When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
    - If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
    - If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • Iphone 5,Facebook app, time and battery % does not display?

    Using iphone 5, Facebook app, why does the time and battery percentage no longer display?

    First, double-tap the home button and then swipe up on the FB app to close it out.  Then, try again.  Second, delete the FB app and then reinstall it and see if that resolves the issue.

  • I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

    i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
    ps: i'm hopeless.

    So what you want is for it to say Lebanon (English)?  If so, see if this helps:
    http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

  • How can u have lock rotation off and mute feature off at the same time

    How can u have lock rotation off and mute feature off at the same time

    Maybe this will help. The link at the bottom is the same one that was posted above.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • When i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ???

    when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it

    Here is some pertinent information and how-to's from Apple:
    http://support.apple.com/kb/TS2570
    Post back if these troubleshooting steps do not work.

  • HT3964 I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now. should i reset SMC. Would i

    I have macbook air late 2010 model... it works fine otherwise but it has started being overheated in normal situations where normally it used to work fine and draining more battery....... battery time is almost half now.
    should i reset SMC... would it help?

    I'm doubtful it's a missing driver too, but I feel as though it's driver related. The first time XP was installed, after first boot without installing drivers, it was without sound etc, but fundamentally the system worked. Now after first boot, it's very buggy. Thanks for your suggestion Tonny. I ran the tool but it turns out the HDD is fine. Besides, everything runs fine in safe mode.
    Does anyone know if (generally speaking) there is any firmware on the graphics card that would get updated via a Windows update? i.e. is it possible that Windows update downloaded a driver for the graphics card that installed new firmware that wasn't all that compatable with XP?

  • My iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% batt

    my iphone is switched off suddenly n then it wont b started it continously shows the apple logo then again switched off automatically and when i charge it so it was switched on and after a long time then it shows battery low and then its also show 4% battery what would i do im very tensed please help ...

    Hello s0ha1b
    If all you get is the Apple logo and it powering off, then the next step is to put your iPhone into recovery mode and then use iTunes to restore it. If you have a back up, then you can put that on there to once the restore is complete.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Enhancement and new features available in AFS 6.0 in reference to AFS 5.0?

    Hi Experts,
    Please can you explain what are the Enhancement and new features available in AFS 6.0 in reference to AFS 5.0

    Hi Mithun,
    Following are the details you needed.
    Enhancement and new features available in AFS 6.0 wrt AFS 5.0
    AFS Interface
    AFS GTS Master Data Integration - IS-AFS-INT-GTS (New)
    As of SAP AFS 6.0, you can integrate the SAP Global Trade Services 7.1 (SAP GTS 7.1) master data to the AFS data.
    AFS Retail Integration (Change)
    As of SAP AFS 6.0, the integration of Apparel and Footwear Solution (AFS) with Retail has been
    Enhanced by the following functions:
    u2022     One SAP Retail Logical system is mapped to multiple Customers in SAP AFS system, which ensures that each Customer can be mapped to a different purchase organization.
    u2022     You can maintain the retail merchandise category in the AFS material master for each retail logical system.
    u2022     The variant numbers created in the retail for the article (material in AFS) have the number with the category and grid combination. A new BADI method is used to allow the user to change the variant numbering as required.
    u2022     The material type of the generic article created is the same as the AFS material. A new BADI method is used to set the material type of the article as required.
    Quality Management (IS-AFS-QM)
    Enabling QM for Goods Receipt (GR) Process for AFS (New)
    As of SAP AFS 6.0, you can activate the inspection type at material level and control the inspection lot creation at stock keeping unit (SKU) level during the goods receipt process.
    Additionally, during posting of quality inspection stocks, you can directly post stock of one SKU to unrestricted stock of another SKU.
    Basic Data (IS-AFS-BD)
    Commodity Codes at the SKU Level (New)
    As of SAP AFS 6.0, you can maintain commodity codes at the SKU level in the material master. A new relevancy Global Trade Services (GTS) is allotted to the characteristics attached to the grid and categories. If this new relevancy is set then the commodity codes can be assigned at the SKU level. You can also assign commodity codes of different countries other than the country in which the plant is located.
    The AFS material master IDoc and BAPI have been enhanced to handle commodity codes at the SKU level.
    Material Master Enhancements (New)
    As of SAP AFS 6.0, the following enhancements have been made in the material master:
    u2022     You can maintain commodity codes at the stock keeping unit (SKU) level.
    u2022     You can maintain the retail data merchandise category and characteristic profile at the material master level. This is used to create article in retail.
    u2022     You can maintain quality management (QM) inspection type at SKU level.
    u2022     You can enable Seasons for inventory management (IM).
    Materials Management (IS-AFS-MM)
    Seasonality Roundoff - Inventory Management-(New)
    As of SAP AFS 6.0, season functionality is extended to Inventory Management (IM). This enables you to gain an overview of material movements during each season. You can maintain stocks for different seasons separately. To enable this functionality, you have to activate the Season Active in IM indicator for a material in the material master. This indicator can be set only for materials created in AFS 6.0. If the season is maintained for an SKU in the material master, you can obtain season information for the SKUs in batches, in material movement documents and in stock tables.
    Also, as of AFS 6.0, you cannot set the Season Fixed indicator for new materials. However, for old materials (materials created in AFS 5.0 with Season Fixed indicator) the behavior remains the same.
    Stock Selection Available in Transaction MIGO (New)
    As of SAP AFS 6.0, the goods movement transaction MIGO has been enhanced with Stock Selection for AFS materials. Goods movement here implies only goods issued/transfer postings without document reference.
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO (purchase-to order) to consume normal planned independent requirements (PIRs).
    IS-AFS-MM-PUR Purchasing
    Purchasing BAPIs (Change)
    The interface of the purchase order (PO) BAPIs mentioned below have been enhanced with optional parameters to handle the AFS data.
    Purchase order BAPIs
    u2022      AFSPurchaseOrder.GetDetail1 (BAPI_PO_GETDETAIL1)
    u2022     AFSPurchaseOrder.Change (BAPI_PO_CHANGE)
    u2022     AFSPurchaseOrder.CreateFromData1 (BAPI_PO_CREATE1)
    Purchase Requisition BAPIs
    u2022     PurchaseRequisition.CreateFromData (BAPI_REQUISITION_CREATE)
    u2022     PurchaseRequisition.Change (BAPI_REQUISITION_CHANGE)
    u2022     PurchaseRequisition.Delete (BAPI_REQUISITION_DELETE)
    Contract BAPIs
    u2022     PurchasingContract.Change (BAPI_CONTRACT_CHANGE)
    u2022     PurchasingContract.Create (BAPI_CONTRACT_CREATE)
    u2022     PurchasingContract.GetDetail (BAPI_CONTRACT_GETDETAIL)
    Production planning and control IS-AFS- PP
      Manufacturing (IS-AFS-PP-MAN)
    BAPI for Bill of Material (BOM) Maintenance (New)
    As of SAP AFS 6.0, you use this BAPI (AFSMaterialBOM.AFSMatBomMaintain) to maintain a material BOM. You can also use this BAPI for the following functionalities:
    u2022     Creating a standard or AFS BOM
    u2022     Changing a standard or AFS BOM
    u2022     Updating a quantity distribution profile for AFS BOM components
    u2022     Maintaining SKU deviation quantities or zero quantities (if relevant) for AFS BOM components
    u2022     Maintaining categories (if relevant) for AFS BOM components
    Transaction for Grouping PO using Combined Order Number (New)
    BAPIs for AFS Planned Orders - Create, Change and Get Details (Change)
    BAPI for Production Orders - Create, Change and Get Details (Change)
    Production Planning (IS-AFS-PP-PPL)
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO (purchase-to order) to consume normal planned independent requirements (PIRs).
    Sales and Distribution (IS-AFS-SD)
    BADI for Contract Selection (New)
    As of SAP AFS 6.0, you can use this BADI to filter contracts for display when a sales order is created without giving reference to the contract, and when there are open contracts for the material. This functionality is also available for the sales order created by IDocs.
    BAPI for AFS Material Availability (New)
    you can use this BAPI method MaterialAFS.AFSAvailabilityCheck (/AFS/BAPI_MAT_AVAILABILITY) to determine the available quantity for an AFS material in a certain plant according to ATP (available-to-promise) logic.
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO(purchase-to order) to consume normal planned independent requirements (PIRs).
    Display of Allocated Quantities (New)
    As of SAP AFS 6.0, you can find the allocated quantity information of the contract in the Contract Reference Overview screen.
    BAdIs in Mass Document Change MDC (New)
    The following NEW Business Add-Ins (BAdIs) are provided:
    u2022     BAdI for adding custom selection fields in MDC (/AFS/MDC_SELECT_CUSTOM_FIELDS) -You use this BAdI to implement your business process-specific logic in selecting data in mass Document Change transaction (/AFS/MDC).
    u2022     BAdI for adding custom change fields in MDC (/AFS/MDC_CHANGE_CUSTOM_FIELDS) -You use this BAdI for implementing your business process-specific logic in changing custom fields data in transaction /AFS/MDC.
    u2022     BAdI for adding custom fields to the Adjust Update tab in MDC (/AFS/MDC_ADJ_UPD_CUSTOM_FIELDS) you use this BAdI to implement custom processes that are specific to your business scenario.
    Condition Table Display (Change)
    As of SAP AFS 6.0, in transaction J3A9 it is possible to display condition tables for value-added service(VAS) and multi-store order (MSO) condition types beyond the existing limit of 19 condition tables. The Conditions Info display in transactions J3A4 and J3AN can be viewed in an ALV list.
    AFS Sales and Distribution (SD) IDOCS
    As of SAP AFS 6.0, the function modules J_4A_IDOC_INPUT_ORDERS and J_4A_IDOC_INPUT_ORDCHG are not supported. The standard function module IDOC_INPUT_ORDERS are used instead J_4A_IDOC_INPUT_ORDERS and standard function module IDOC_INPUT_ORDCHG are used instead of J_4A_IDOC_INPUT_ORDCHG. There is no change in the IDOC type /AFS/ORDERS05 which is presently used to create/change sales orders. Accordingly, you must use inbound process code ORDE for message type ORDERS and inbound process code ORDC for message type ORDCHG.
    Supporting the Change of Single Characteristic (New)
    As of SAP AFS 6.0, you can use transaction /AFS/MDC, to select sales documents by specifying a single characteristic name and value range in the same ways as you select sales documents by specifying grid value.
    Partial Quantity Reductions in Sales Order (New)
    As of SAP AFS 6.0, you can find the quantity changes done for a schedule line from the sales order screen itself without navigating to the change logs. This is possible only when you reduce the quantity of a schedule line.
    Allocation Run (IS-AFS-ARUN)
    Seasonality Roundoff - Allocation Run (New)
    As of SAP AFS 6.0, season functionality is available in the allocation run (ARun) to ensure the season information is considered while creating assignments, and to cause deallocation as per the settings in the deallocation rule on change in season information in the future receipts, sales order or while performing goods receipt (GR). This functionality is available only with online ARun.
    BAPI for Individual Allocation and/or Deallocation
    As of SAP AFS 6.0, you can use the BAPI /AFS/BAPI_INDIVIDUAL_ARUN to handle allocation/deallocation of specified sales order quantities for single or multiple orders. This enables you to make:
    u2022     New allocations
    u2022     Allocations from a particular storage location/batch number
    u2022     Allocations for a quantity less than equal to the requirement quantity
    u2022     Deallocations for a quantity less than equal to the requirement quantity
    u2022     A total deallocation
    Hope it helps.
    Regards,
    Anirban Roy

  • Battery shows incorrect time and no notification on low battery

    Hi everyone,
    I have just purchased a new battery, of course its not an original one. The problem is that my battery meter shows the percentage incorrectly. Like it says 42% remaining, but suddenly my laptop got in to hibernation (as i set the action to perform upon low battery level reaches). Now what can be the issue? As the battery new and its working fine, i mean its giving me backup of 2+ hours. Oh, and my laptop is DV6-2157wm with Windows 7 Home Editions (64-bit).
    Waiting for your kind suggestions and tips.
    Take care,
    Regards
    Fahad Ali

    Please have a look here.
    http://windows.microsoft.com/en-us/windows-vista/Battery-meter-frequently-asked-questions
    Why does the time remaining on the battery meter change drastically sometimes?
    Battery life depends primarily on two things: what you do on the mobile PC while it's running on battery power, and the power plan settings that control the computer's use of power. The mobile PC's power consumption varies constantly, depending on your particular activity and how long you spend on that activity. For instance, watching a DVD consumes considerably more battery power than reading and writing e-mail. For these reasons, the battery meter often lags in reporting the charge and the estimated time remaining.
    hence battery meter is never so accurate. older the battery, chances are more of sudden drop.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • [svn:fx-trunk] 16334: Preliminary Spark Image and BitmapImage enhancement feature work.

    Revision: 16334
    Revision: 16334
    Author:   [email protected]
    Date:     2010-05-26 19:31:28 -0700 (Wed, 26 May 2010)
    Log Message:
    Preliminary Spark Image and BitmapImage enhancement feature work.  Also included with this checkin is the ability for BitmapImage and s:Image instances to share an image cache.  Queueing is next up to be checked in.
    QE notes: Proceed with testing, though PARB related renames are pending. Not considered code complete.
    Doc notes: Should begin reviewing new classes in preparation for doc'ing.
    Bugs: None
    Reviewer: Ryan
    Tests run: Checkin, cyclone server Mustella tests.
    Is noteworthy for integration: No
    Modified Paths:
        flex/sdk/trunk/frameworks/mx-manifest.xml
        flex/sdk/trunk/frameworks/projects/framework/manifest.xml
        flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
        flex/sdk/trunk/frameworks/projects/spark/defaults.css
        flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/BitmapImage.as
        flex/sdk/trunk/frameworks/spark-manifest.xml
    Added Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapScaleMode.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/graphics/BitmapSmoothingQuality.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LinkedList.as
        flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/LinkedListNode.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Image.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Image.png
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/contentLoader/
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/contentLoader/ContentCache.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/contentLoader/ContentRequest.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/contentLoader/IContentLoader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/core/contentLoader/LoaderInvalidationE vent.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ImageLoadingSkin.mxml
        flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/ImageSkin.mxml

Maybe you are looking for

  • Open hyperlinks in same window

    Hi everyone, I've just got a quick question. When converting the powerpoint to a flash file, does anyone know how to make the hyperlinks on objects (right click object > action settings > hyperlink to > URL) open in the same internet browser window t

  • Trouble transferring data from iPhone 4 to Mac OS X 10.5.8

    I borrowed my sister's old iphone 4 whilst i was travelling overseas. Her accounts were still on the phone and it was closed to her carrier so i had to unlock it and change settings around so that i could use my accounts. Whilst unlocking it i backed

  • Nokia Music - UAE (MENA) - Misleading/False Nokia ...

    </body> I am so much annoyed for the past many years (since the release of N8) that music can't be bought or vouchers are not available for Nokia Store in UAE. Now after buying Lumia 920, the Music App is not available in UAE, thus we can't buy/strea

  • Quicktime X & Youtube problem

    Morning Last night I filmed/recorded some mates doing an acoustic set, I edited it together on final cut express and audio with logic studio. I've exported it and the .mov is around 850MB for a 3.5 minute video. I don't seem to be able to figure out

  • Forms Runtime Diagnostics assistance plz

    "Forms Diagnostics Techniques" p 82, suggests the system administrator should provide an alternate HTML file with FRD switched on and redirect users to this alternate file. My question is since this is the FORMSWEB.CFG file, how do you accomplish thi