Battery updater issue
Hey everyone I turn on my mac today and the software update thing popped up and i downloaded everything and that included the battery updater 1.2. After doing everything it asked my battery "is not available" and it shows a black X, but if i hit the button on the bottom of the battery it says it is full and if i unplug the power cord it shuts off. hopefully someone can helps thanks.
You can calculate the wattage from the information on the power supply. Look for the output voltage (i.e. 24.5v) and current (i.e. 2.65A) and multiply to get 64.925 watts.
Be aware I think there have been reports of 65W adapters erroneously showing in System Profiler as 45W adapters. I don't recall if the adapters were mislabeled or what.
Similar Messages
-
Iphone 4s IOS 7.0.4 update battery drain issues
I hope this gets to apple in regards to the issue of the battery drain. I have been following several discussions for the past couple of weeks and everyone seems to have some type of idea on what the problem is. I'm not a service tech or gadget know all, but I have been performing several "Nonscientific" test to see what is draining my battery.
I have a 4s that has always had good battery life. It seemed to run consistent to what was detailed in the product specs. I would only need to charge it every other day on limited use or the next day with heavy use. After updating to the latest update (IOS 7.0.4), the battery would drain in less than a day on limited use which is a couple of text, couple of email checks, 3 to 4 phone calls at less than 10 minutes each - no internet searches or game play.
So, after reading everyones suggestions in the forums and trying them, the battery still drained just as fast, if not faster. I read a post somewhere regarding “Bluetooth” constantly searching. So, I saw mine was doing the same. Someone replied to that person that it should not be the issue, as it does not use much power to run its task. (I found they were wrong)
Here is my nonscientific test, but a good one. (for the record I had nothing on in the notification center, Do not disturb off, only thing on in Privacy - location services was google maps, Siri, Yelp, and Find my phone; iCcloud was off; background app refreash was off; email fetch data was off; everything else was off)
Day 1 - I fully charged my phone several hours, I unplugged it at night before going to bed, did a hard reset to make sure every app was off, and only opened the settings app and made sure the Bluetooth was onand searching. I checked my phone 6 hours later and saw the battery drained from 100% to 56% with no usage other than just being on and in sleep mode. That would mean it drained at 7.3333 % an hour. Some would say that acceptable. - Its not when there is no usage. The battery would die in 13 hours with no usage.
Day 2 - I repeated the test (as above), but turned off the bluetooth. I checked my phone 6 hours later and saw the battery did not drain at all. I started with a 100% and battery was still at a 100% with no usage other than just being on and in sleep mode. I opened a couple of apps and closed them to prevent them from running in the back ground and noticed I lost about 2% of charge after usinging it checking an app or 2. I put it back to sleep mode and checked it again in an hour and saw it only drained 3% down to 97%. Very acceptible.
Day 3 - I repeated the test, but during regular day hours with limited use of the phone (with bluetooth off). I was back to getting close to a normal battery drain I was experiencing prior to the update. I know that IOS 7.0.4 uses a little more battery power to run as it has different features and abilities, so the battery drain was not like it was before, but a lot better.
So, my experiment concluded to me that the new update is causing the bluetooth searching to run in the back ground continuously and causing the battery to drain unacceptably fast on my phone. This is a program issue that can be fixed by Apple. I find it unacceptable to have to control my bluetooth manually, as I never had to do it before and I shouldn't have to do it now. I hope Apple will fix it soon. I‘ve been a apple product person for years, and enjoy the products, but lately they have been not been satisfactory in the phone business. I have been playing with a samsung galaxy thats looking very promising, if apple doesn’t fix the issue everyone is having, they will loose business to competitors.
Please fix the issue!Hi Folks,
iPhone & iPad2 battery drain issue SOLVED!!!!!
I had a serious battery drain problem on THREE devices using different iOS .... it was a simple fix and had certain characteristics that you may be able to relate to ......
Devices; 16GB iPhone 4 with IOS6
16GB iPhone 4S with iOS7.06
32G iPad2 with iOS7.04
On or about Feb. 28th all three devices started to drain the battery like crazy losing about 20%/hour on the iPhones and 10%/hour on the iPad2 .... After messing around with settings, browsing forums and looking at what was common between the three devices I concluded the problem was with a single Microsoft Outlook/Live/Hotmail email account in the iOS native mail app .... I deleted the email account on all three devices (along with other unrelated Microsoft accounts on each device) and did a hard reboot (hold HOME and top LOCK button simultaniously for about 10 seconds until the apple logo appeared).
I then re-created the common Microsoft Outlook/Live/Hotmail account on all three devices in the iOS native mail app ...... SUCCESS! Now all three devices are behaving normaly with respect to battery drain ......
Hopefully this will be useful to others in this thread .......... -
Macbook Pro Battery Update 1.2 Issues
Just installed the Battery Update 1.2 on my Macbook Pro and now when running off the battery, the system automatically shuts down when it reaches 35%. What kind of an update is this?
I didn't have any battery issues prior to installing the update, and simply updated thinking that maybe it might give me more battery life, and as it was official software, it would be rather innocuous - I was wrong.
Is there a way to reverting the software to its original state?
The battery has a cycle count of 89.Calibrating MacBook Pro batteries...
PowerBook G4 (15-inch Double-Layer SD), MacBook (all models), MacBook Pro (all models), and MacBook Pro (17-inch) (all models)
The battery calibration for the PowerBook G4 (15-inch Double-Layer SD) and any model of MacBook or MacBook Pro has been updated because of a new battery released with this computer. With these computers, follow these steps to calibrate your battery:
Plug in the power adapter and fully charge your PowerBook's battery until the light ring or LED on the power adapter plug changes to green and the onscreen meter in the menu bar indicates that the battery is fully charged.
Allow the battery to rest in the fully charged state for at least two hours. You may use your computer during this time as long as the adapter is plugged in.
Disconnect the power adapter with the computer still on and start running the computer off battery power. You may use your computer during this time. When your battery gets low, you will see the low battery warning dialog on the screen.
Continue to keep your computer on until it goes to sleep. Save all your work and close all applications when the battery gets very low, before the computer goes to sleep.
Turn off the computer or allow it to sleep for five hours or more.
Connect the power adapter and leave it connected until the battery is fully charged again.
Tip: When the battery reaches "empty", the computer is forced into sleep mode. The battery actually keeps back a reserve beyond "empty", to maintain the computer in sleep for a period of time. Once the battery is truly exhausted, the computer is forced to shut down. At this point, with the safe sleep function introduced in the PowerBook G4 (15-inch Double-Layer SD) computers, the computer's memory contents have been saved to the hard drive. When power is restored, the computer returns itself to its pre-sleep state using the safe sleep image on the hard drive. -
how can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.
Search this forum. Your issue has already been addressed ad nauseum.
Best,
GDG -
Massive battery drain issues after the latest software update - phone hot
After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?
Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck. -
Possible fix to Battery Update 1.3 issue?
So I installed the battery update 1.3 on my MBP, and like many of you guys, promptly got my battery health / life wiped by about half (242 cycles, capacity before and after update was about 4700 and 2600, respectively).
I tried resetting the SMC and PRAM to see if that'll get my battery back to normal, but nothing. Now I'm giving re-calibration a shot, and have noticed something interesting. I let the battery run down and the system go to sleep, as you do for re-calibration, and now, more than 24 hours later, the light is still pulsing. Previously the light on the MBP would stop pulsing a few hours in, about 6-8 max, when the battery was completely drained, and then the system would go into deep sleep.
So it would seem that the 1.3 update makes the system think that the battery is low on power when it would in fact have plenty of power left.
So now what I'm goin to do is wait till the system goes into deep sleep i.e. the battery is completely drained. Shouldn't take too much longer, as sleep mode drains a full battery in about a week. Once that happens, I hope the system would then recognize the true low power limit of the battery, and so the battery would be back to normal, fingers crossed. Will keep you posted...
If all else fails, I'll have to try and score a free replacement battery. Maybe i'm being cynical, but I feel this update's sole purpose was to get us to shell out on new batteries...I would normally get about 2 hours and 20 minutes out of my MBP under 10.4 while watching movies ripped to itunes. I upgraded to 10.5.1 leopard and now it ran out of power in 49 minutes. I went in and checked to make sure nothing was operating in the background, i.e. other programs, wireless, bluetooth, etc. I made sure that the energy saving mode was on. I charged it up fully, unplugged it and then continued the movie while timing. I got the "20%" warning at 25 minutes and the Mac Book Pro went to sleep at 29 minutes. I checked the serial number on the battery, KF651K5JX0DA. It does not match the exchange program. It has 137 cycles and a health of 34%.
-
What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi. I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed. Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates. I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery. I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden. It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks -
Possible solution to iOS 7.0.3 battery drain issue (iPhone 5).
Not a question as such, but for anyone who's having battery drain issues on iOS 7.0.3 and doesn't want to attempt upgrade to iOS 7.0.4 revision yet...
I was having some problems with battery drain with my iPhone 5 since updating to 7.0.3. The device is only about 5 weeks old so I was quite annoyed that I had issues with it.
This morning after a full charge I did a hard reset. Now the problem seems to have gone. I've had the phone on for several hours (about 4.5hrs) and it's only just dropped to 99% moments ago. This is a massive improvement (on even the battery life of the device when I got it, and it had 6.1.3 factory installed).
I hope that this helps anyone who doesn't want to risk 7.0.4 until it's had a chance to cool off and for people to identify/resolve any issues (as I am waiting too).The update isn't the problem. It was a problem with your update process. millions of others have updated without any issue at all.
Also resetting has been discussed many times in the never ending battery draining threads. -
The iPod Classic I bought a month ago is not synching with my new Mac Book I bought 3 weeks ago. All the software was immediately updated. My iPhone 5 synchs fine, and so does my 2nd generaton iPod Touch. The original computer I synched all of these devices on was my HP latop. I bought my Mac and Classic to the Apple Store for a 'Genius Appt' and they could not figure out what the problem is. The connected my Classic to another computer and the same thing happens. It says device is not recognized. They also took other iPod Classics and connected them to my Mac and other Macs. The same thing was happening. They took notes and said it probably is an iTunes update issue.
I can manually drag songs into my Classic but I lost all playlists because it cannot be backed up as well and they had to restore it. For now I am holding on to it but it's usless to me if I cannot use it the way I liked too. I used it for the gym and bike riding and my last iPod battery died after 6 years. A charge would last 45 miutes. I love the Classic for what I use it for but it's a $275 brick to me now. At least the renewed by receipt so I can get a full refund.
Is anyone else seeing this issue ? The Apple Store employee said he saw a first generation iPad havng the same issue. As of now the Support Dest is unaware of this. As much as I love my new Mac I am disappointed I cannot sync my new Classic to it. Total bummer.
Any help would be apprecated.By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.
-
MacBook and MacBook Pro Battery Update
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to improve battery performance.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
Battery will not charge when computer is plugged into AC power.
Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Pretty nice change for those C2D's -
Odd battery life issues after improvement w/ 5.1
I have an iPhone 4 GSM (AT&T) that was experiencing significant battery life issues with the previous version of iOS (5.0.1?).
After updating to iOS 5.1, the battery life improved signifcantly - I could now get comfortably through a day with 50% remaining at bedtime versus 20%.
In the last couple weeks the battery life started getting worse and worse, to the point where I could barely get home from work and it would be 10-20%. I started to pare back the settings like Location Services, notifications, frequency of email checking, etc. with no improvement. I noticed the phone seemed to be running warmer than usual, so I thought there may be some software issue causing an infinite loop...
I Reset Network Settings as I've heard that can help - no difference. Then I wiped the iPhone and restored from backup - no difference. Finally I wiped the iPhone and set up as New, only installing a few apps and being very conservative with push, GPS settings etc. I am still down to 20% by 5 pm, and this is with light use. Wifi is on all the time, which is what I primarily use, but it never caused this much drain.
It's also quite variable - the other day I made it home with about 70% battery life, but then it dropped 25% in 30 minutes with only light usage (email/web).
Is the battery itself going bad, and/or is there any way I can test it? I got this phone as a warranty replacement (probably a refurb) in July 2011 so I don't think the battery is that old.Just an update. I totally wiped my iPhone 4, and turned everything off including keeping it in Airplane Mode and it seemed to help a little - it was over 80% at noon without any use. Of course, the phone is useless like this. As soon as I turned wifi on at work (still left the cellular radio off) it started dropping fast.
It must be the battery going bad, but I was just wondering if there are any other suggestions. I don't want to pay to get a new battery installed if I don't have to, since by this fall I will be eligible to upgrade to iPhone 5 if it comes out. -
Problems after Battery Update 1.4
Has anyone noticed that since installing the Battery Update 1.4, their battery life has been reduced significantly? Prior to the patch I was getting a good several hours from a full charge, now I am lucky to get 1.5 hours.
Also, while the patch was meant to improve the Macs ability to +'maintain its charge when shut down and not used for an extended period'+, I immediately noticed the first night that I shut down with 3/4 battery and woke up the next morning with 1/4.
I have read of several people having issues with the battery not charging or taking a long time to charge - I haven't noticed if I am having this trouble as well.
Anyone??
Specs:
System Version: Mac OS X 10.5.8 (9L31a)
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3891-2b88
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102My battery was great I never had to take my charger with me, but after Battery Update 1.4 my battery only lasts half as long now, and if I didn't use it for a week my battery was still 80%-90% now if I don't use it for a week I only get half an hour before I have to plug it in.
THIS UPDATE HAS CAUSED THE PROBLEMS THAT IT WAS MEANT TO FIX!
I only installed this update to be a good little consumer and have now ruined the performance of my macbook, I have tried to uninstall it and rollback to the previous version with out success.
Please help?
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3770-5315
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102 -
How to identify 45 watt vs. 65 watt adapter? (Battery Updater not working)
I have read that it's better to use the original 65 watt adapter, not the 45 watt, to charge my PowerBook G4. Can you tell me how to tell which one I have? The wattage is not listed on the adapter anywhere.
My real issue is that I run the PowerBook G4 Battery Updater and I get the message "You must have a 65W power adapter plugged into a working power source during the update process." I am plugged in using what I think is the adapter that came with it, but it does not complete the update.
Thanks!You can calculate the wattage from the information on the power supply. Look for the output voltage (i.e. 24.5v) and current (i.e. 2.65A) and multiply to get 64.925 watts.
Be aware I think there have been reports of 65W adapters erroneously showing in System Profiler as 45W adapters. I don't recall if the adapters were mislabeled or what. -
Battery Update Causing Kernel Panics?
It seems that ever since I installed the Battery Update it's been causing Kernel Panics on my MBP. Three since yesterday in fact. Has anyone else been experiencing this?
MacBook Pro 1.83 GHz Mac OS X (10.4.9) 1 GB RAM, 80 GB HDD, ATI Radeon X1600Hmm I have seen multiple posts on the computer not booting the OS (gets to the grey apple with spinning gear screen) but so far I think you are the first I have seen reporting kernel panics.
Can you boot to the install cd? I'd try running the disk utility from the install disk and verify/repair permissions and verify the disk as well. (repair disk if verification fails)
Here is an article that may help ya:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214 -
Hi, do you know if is possible determinate the issue period of a battery from its serial number? I've downloaded yesterday battery updater, my PB is in range of updating but I don't remember if the application has started or not. I've bought on auction an almost-new battery and due to this:
www.info.apple.com/kbnum/n303035-it ......below.......
"Installing the update
After you download the update, if your PowerBook is plugged in to AC power, you'll see a dialog box notifying you to open the updater in the /Applications/Utilities folder. (Tip: If the dialog box does not appear, your battery does not need the update.) If you see the dialog box, locate the "PowerBook G4 Battery Update" application in the Utilities folder in the Applications folder and open it. When you start the updater, the instructions appear on the screen:"
I don't know what I must do.
Thanks for your helpingnot solved but not so important right now
Maybe you are looking for
-
Photoshop CS4 crashing on Vista 64-bit
I downloaded PSCS4GPU_OptionalPlugins.zip from http://kb.adobe.com/selfservice/viewContent.do?externalId=kb405064 It includes Disallow OpenGL Windows and Allow Old GPUS script files that are are also uninstallable. On my machine at work (Windows XP P
-
Use my PowerMac G5 + MacPro with 1 Apple 23" Aluminum Display?
While I have a 17" Apple Studio Display (plastic surround) for my PowerMac G5, I'd like to have both computers (MacPro) share the Apple 23" display (aluminum display) so I can free up the 17" Studio Display for my MacBook Pro. I think this can be don
-
Hi Is there anything like structure mapping in xi ?? or otherwise whatever the mappings that we use like ABAP, XSLT, JAVA etc .......will be called as structure mapping ?? If I got to choose out of these which XI supports a. Structure Mapping b. Node
-
IDSCS5.5 How to determine if a pageitem was copy/pasted from Illustrator
Hi, My flow is as follows: - Open document in IndesignServer - (XML)Tag every pageitem with our custom IndesignServer plugin (c++ SDK) - If pageItem is a group, tag every member separately - save/close the document My problem is: - If pageitem was co
-
I downloaded photoshop not too long ago and then 1 week later got a new computer, is there anyway of
I downloaded photoshop not too long ago and then 1 week later got a new computer, is there anyway of putting photoshop on the new computer??