Battery will not charge on my Mac Book Pro.

I recently (as in, a few months ago) replaced the battery on my Mac Book Pro, because I had overcharged my previous one into oblivion. Since I replaced the battery, however, the computer has been working fine - until today, anyways. The computer will not work without being plugged into the charger, and when it's on, it insists that the battery needs replacing, despite having a cylce count in the 80's. In the spirit of full disclosure (and getting help with this issue), I will mention that there is some small damage on one of the corners on the laptop. I don't know how the damage was caused, I just woke up one day and it was there, but I doubt this has any relevance, as the damage is nowhere near the battery. Regardless, any possible solutions would be greatly appreciated, as I would prefer to not replace a (relatively) new battery.

1. I suppose it wasn't over-charging per se, but instead just that I used it too much while the charger was plugged in and the battery was at full, which can kill your battery.
2. The damage I described happened unbenkownst to me, therefore, as far as I'm concerned, it was fine one day, and damaged the next.
3. I realize the damage may have relevance, but said damage would then require a completel overhaul/replacement of the computer, seeing as that would likely mean the damage would be affecting the computer. I am more inclined to believe that the battery is, for some reason, not registering.
If I can't find an answer, I'll simply take it into a store to have it looked at, though obviously I'd prefer to explore simpler solutions, as the closest Apple Store is not close at all.

Similar Messages

  • I can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

    When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
    The MBP connects smoothly to the internet, just not the TC.
    Does this help?
    There is no login name required to get internet unless you are running a vpn or pppoe client.
    The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
    It sounds to me like you have the wrong setup.
    Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
    Please also do a snapshot of the TC and how it is setup.
    What broadband do you have?
    Is the TC a router or bridged?

  • I have logic pro studio 8 and the upgrade, however it will not upload on my mac book pro. It says i need a product key for the logic 9 and it come with one.

    I have logic pro studio 8 and the upgrade (logic pro 9) and it will not load up to my new mac book pro.  Its asking for a product key for the logic pro 9 upgrade and there wasn't one in the box.  i need some help

    Contact AppleCare... Explain you are a Logic User and you should be transfered to a Product Specialist to assist you with your Issue.

  • AIM ichat will not sign in on Mac book pro/Lion. It always says error..?

    mac book pros on lion will not sign in to ichat using a AIM. My computer was took to the genius bar and it could not be logged into ichat. everything was tried. they said it was probably a bug so can apple please fix it in the next update? thanks.

    Hi TMSlattery,
    Thanks for using Apple Support Communities.  Based on the description of the issue, it sounds like your computer isn't able to reach the Mac App Store (iTunes Store) or iCloud servers.  I would recommend the troubleshooting here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes and Safari to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Cheers,
    - Ari

  • HT1379 my battery will not charge on my new mac

    Battery will not charge.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    You can try resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • New iPad 3 will not charge from a mac. need help on that

    my new ipad 3 will not charge from a mac. need help why if any one knows? thk

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
     Cheers, Tom

  • My MacBook's fan is operating very high and I am able to hear it. Also my battery will not charge. I am told that there are no batteries available

    My MacBook's fan is operating very high and I am able to hear it. Also my battery will not charge. I am told that there are no batteries available

    Welcome to Apple Support Communities.
    For the fan running continually, first try an SMC (System Management Controller) reset:
    http://support.apple.com/kb/HT3964
    Since you did not mention which model of MacBook you own, it's impossible to answer your battery question.
    Apple still sells original-equipment batteries for most models from the Apple Store online.
    Another reliable source of Mac products is OtherWorldComputing (www.macsales.com).
    And some people choose to purchase batteries from what I consider to be less-reliable sources such as eBay.

  • My macbook battery will not charge. I have tried unplugging and doing an SMC reset but it did not seem to change. I have yet to try another magsafe charger. The charger has a dim green light while plugged into the computer. What are my next steps?

    Hello Everyone,
    This is my first time using the forum. My macbook battery will not charge. I have tried unplugging and doing an SMC reset but it did not seem to change. I have yet to try another magsafe charger. The charger has a dim green light while plugged into the computer. What should my next steps be, besides trying a new charger as well as being the most cost effective?
    Thanks
    -TB

    Hi ..
    The battery may need replacing.
    Check the battery maximum cycle count > Mac notebooks: Determining battery cycle count
    And check the adapter >  Apple Portables: Troubleshooting MagSafe adapters

  • Battery will not charge. and other issues

    Well i'm working on a friend of mines notebook, its a n100 model 0768 12u running windows xp. This is the situation so far. First his hard drive had fried so i replaced that and put the o.s. back on it,but now the battery will not charge. also the wireless network card and dvd drive did not work. I had originally thought that they might have fried as well when the hard drive went down. However I looked through the forums here and found that alot of people solved the battery issue simply by replacing the battery i recommended that. He purchased a replacement battery ( not a genuine lenovo battery, don't know if that makes a difference) and when i put it in the dvd drive and the network card started working no problem. But alas the battery still would not charge. the system runs fine without a battery in it, but if i put the battery in it while its running it turns itself off after about 30 seconds of having the battery in. when the system is powered off and i put the battery in the battery lcd in front blinks 5 times orange then nothing for about 30 seconds then 5 more times. maybe thats a trouble code, don't know, looked all oover the forums and couldn't find anything quite like it. any help would be greatly appreciated.
     thanks
    Steve

    Duck3,
    Glad that worked for you!  Thanks for sharing here. 
    I saw a weird situation on friend's ThinkPad recently - a replacement battery arrived with a 37% charge (not 100% deliberately as somewhere around 40% is the best for shelf life), but it would not accept a charge.   We did a reset by removing the battery & AC and pressing and holding the power button a number of times  (some people say 10 times, some two or three times for a count of 5 or 10).   This drains residual capacitance.
    We plugged back in the battery and AC and it began to charge.  
    Might be worth a try here before he opens it up ....
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • Equium M50 - The battery will not charge

    Hi, I need some advice regarding a charging problem on my PC.
    The battery will not charge and the level indicator shows a constant 5%.
    The machine is about 15months old and does not get hard usage, probably an average of 5-10 hours per week.Usually it's powered from the mains, so the battery tends to be kept topped up.
    Before I go and replace the battery, is there any diagnostic I can do as a user?
    Looking forward to a reply.
    many thanks
    Steve

    Hi,
    no, I dont think that it will makes any sense to perform some diagnosis because it sounds like a hardware related issue and I think it would be better to bring your machine to a authorized service partner for a hardware checkup or probably a exchange of the malfunctioning components.
    To find the nearest available service partner in your country you can try this link:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
    Good luck and nice weekend
    Greets

  • Reinstalled Windows on HP Compaq nc2400 & battery will not charge.

    I reinstalled Windows XP on a friends HP Compaq nc2400 now the battery will not charge. When I plug in the AC power cord the device manager thinks it is Broadcom Gigabit Ethernet card. I have reinstalled the battery and AC drivers to no avail.  Any idea of what might be the issue. I have also tried a spare battery and power cord to no avail.
    Thanks in advance.

    You're very welcome.
    Do you know if the battery was charging beforehand?
    Is it possible the contacts on the battery/notebook got bent somehow?
    You can try this...
    Reset the Microsoft ACPI-Compliant Control Method Battery which is basically the driver that communicates between the computer and the battery. There is a chance that it is corrupted.
    Step 1. Go to Device Manager
    Step 2. Select Batteries
    Step 3. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
    Step 4. Click Uninstall
    Step 5. At the prompt put a check in the box to remove the current driver
    Step 6. Shutdown the computer
    Step 7: Remove the battery for minute and then put it back in
    When the computer comes back up it should automatically find the driver.
    Step 8. Go to Device Manager
    Step 9. Select Batteries
    Step 10. Right click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there
    Step 11. Click "Search automatically for updated driver software"
    Do the same thing with Microsoft ACPI-Compliant Embedded Controller.

  • Iphone4 Battery will not charge

    iPhone 4 battery will not charge any ideas. This phone is 3 weeks old

    Did you check the USB port/cable for any kind of debris or lint? Are you using the wall adapter? Can you use another USB cable?
    If this does not work, get it serviced, you're still under warranty.
    Message was edited by: Ingo2711

  • T23 battery will not charge

    I have a T23 (2647-4MU) that the battery will not charge any longer.  I bought a new battery (that's what one of the FAQs said I probably needed to do.  It came charged to 74% but has slowly been going down.  I just run it on the power supply now but would sure be nice to be able to make small room changes without having to shut it down.  I'll appreciate any help I can get.  Thanks

    Welcome!
    From the description of your problem, my vote would be to say that a part has come loose from the motherboard. I've personally seen two T23s that did this (out of about 40 that have gone through my hands). Of course the fact that I buy "parts and repair" systems off of eBay kind of skews this occurrence . If you are handy with a screwdriver and a soldering iron, then use the Hardware Maintenance Manual for the T23 and remove the keyboard and check the black part near the top center of map location G6 in this scan. If you find that the part is loose but can't do the soldering yourself, then try a local computer or TV repair shop. If you disassemble the system beforehand and ask them to re-solder the part back on, it shouldn't cost you more than $10-$15.
    There can also be some other problems on the motherboard which causes the battery not to charge (blown fuse; but that generally means the laptop will not work at all with a battery) or another loose or fried part. The part I've highlighted usually is the culprit in these situations.
    Ray Kawakami
    X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
    Not a Lenovo employee; just a volunteer helping out here
    All personal links to PC-Doctor software removed 8/2012 by mfg request

  • Droid X battery  will not charge when phone is in vehicle mount

    Droid X battery will not charge when phone is in vehicle mount. If you plug phone directly in to car charger it charges fine. This makes using the GPS virtually useless as it runs down the battery very fast. Anyone else have this problem. Other wise I love the phone.

    Many of the Verizon Droid X car mounts have defective wires in them. This problem is widely reported on many forums and websites. You should return your product for a brand new replacement that is not defective  (that is, the car charger will charge your Droid X when it is in the car mount).
    I happen to love the Verizon Droid X car mount. Lot of ways to adjust it from different angles for different placements. Just get a Verizon Droid X car mount replacement that does not have defective wires in it, and it should work just fine!

Maybe you are looking for

  • Adobe Creative Cloud Apps is broken

    Hello guys, my name is Lukas and im new member. First, i have to apologize for my english language. Guys, i have problem with application "Adobe Creative Cloud for desktop". In bookmark "Apps" in Creative Cloud i have warning and that, application Cr

  • How to set max size for varchar?

    Hi, all.      I want to set a type like Varchar(max) in SQL Server.      How to do that in MAXDB? Thanks.

  • CcBPM queue blocked related to certain correlations being "busy"

    The symptoms of the error is SYSFAIL on queue XBQ0 with StatusText: "Permanent error in BPE inbound processing" This ccBPM bundles CREMAS idocs with a correlation on RCVPRN. There are 11 different RCVPRN, but the correlation is only working on 5 of t

  • Use WEBUTIL for upload and download file to/from Database

    Dear friends I have a table with three columns (id , name , myDoc) myDoc is a BLOB, I would like upload word documents or PDFs or images to myDoc column, I use Oracle Form 10g, I try to use webutil to solve my problem, but I couldn't, Please help me.

  • Cannot update to Acrobat 8.1.2

    I have a fresh install of CS3 and want to update Acrobat to 8.1.2 (currently at 8.1.0). However, Adobe Updater reports that no updates are available; the standalone patcher also fails because when it asks me to select the copy of Acrobat to update, t