Battery won't stayed charged after latest update on iphone 4

I cannot get the battery on my iphone 4 to stayed charged.  I charged it to 100% before going to bed by morning it was down to 35%. I had turned off automatic push services, made sure there were no open icons. I had spoken with an Apple rep that morning so he instructed me on what I should do.  I've had the iphone 4 since January with no problems at all until I downloaded the latest update ....that's when all my problems with the battery began & my facetime freezes so bad I'm unable to use it & it worked great before the battery problems started.... the battery has lost all charge and I have recharged to 100 % several times and still will not hold charge......any information would be greatly appreciated...I'm so frustrated!!!

Please define "not working".

Similar Messages

  • My iPhone 4 battery will not fully charge after latest update.  What gives?

    I updated to the latest software and now my iPhone will not charge.

    After a full 8 hour charge it only shows about 40% charge.  This phone worked without incident before the last two firmware updates.  I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great.  There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago. 

  • My iPad won't stay charged after iOS7 upgrade

    Ever since I upgraded my iOS on my iPad 2 it won't stay charged and also takes forever to charge.  Anyone else having this problem?  I'm constantly closing everything that is open - super frustrating.

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Torch 9850 won't hold charge after OS update

    I updated my blackberry last Wednesday with the latest OS (7.1), and since then, my phone won't hold a charge.  I started noticing it on Thursday, and it's progressively gotten worse.  A full charge will last only about 4 hours.  I've changed the battery out for a new one, but to no avail.  The phone won't hold a charge.  It will, however, still charge with either battery (the old and the new), and after it's charged (after being totally dead) it will turn on, andit will connect to Blackberry desktop software.  It just won't hold the charge.  Please help...what can I do???  Note: I live in Mexico, and have no warranty, so I can't return the phone.  So please, someone help with ideas that don't include getting a new phone, if it's possible.  Thanks!!!
    Solved!
    Go to Solution.

    Hi beccaethompsonand welcome to the BlackBerry Support Community Forums!
    Do you have any applications running in the background? Hold down your menu key on your BlackBerry® smartphone to open up the application switcher to see what's currently running.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Driod 4 keeps rebooting itself and battery won't stay charged

    What do I do about my droid 4 constantly rebooting itself after the verizon wireless update that was pushed out March 23 or so?
    1st my phone was frozen after the update and I had to request a replacement phone.
    2nd the replacement phone randomly just reboots, whether I am using it or not.
    The battery barley stays charged even when it's on the charger.  I have all the data syncs off
    I can't update my apps because the phone says it does not have network access., but I can make call and send text messages.
    very upset about this, verizon should have tested the update further before pushing it out.  there was nothing wrong with my original phone, now I h ave a large paper weight that has to stay hooked to the charger.

        Hi alval!
    I am sorry to learn of the rebooting issues with your phone after the latest software update. Let's get your phone our the paper weight mode and back into the awesome wireless device that it is! I had similar issues with my phone after the latest software update and I resolved all issues by doing a factory reset http://vz.to/TZvgLF as this clears any third party applications conflicts and any potential system errors created while processing update. Make sure to back up all your important media before doing factory reset as this process deletes all media and bring phone back to original state. Keep us posted.
    AntonioC_VZWSupport
    Follow us on Twitter at www.twitter.com/VZWSupport

  • My iphone will not charge after latest update.

    After I did the latest update first my middle button stopped working then the volume stopped working but both were fixed after a restart. Now my phone won't charge I get the message cable not compatible but it's the charger that came with the phone. Please help.

    After a full 8 hour charge it only shows about 40% charge.  This phone worked without incident before the last two firmware updates.  I use the same wall charger and Apple cord for my iPad and wife's phone (she has not updated her phone to iOs 6.0.1) and they all work great.  There must be something in the new update that kills battery life. By the way, I replaced my battery less than a month ago. 

  • TS3927 Why won't itunes open after latest update?

    Why won't itunes open after the latest update?

    See iTunes launch errors caused by iAdCore.dll.
    Review the rest of the user tip if required.
    tt2

  • My phone(4) won't turn on after latest update

    I ran the latest update last night & now can't turn on my phone. All I get is the iTunes emblem & a picture of the plug in on a charger. any suggestions besides a reboot. Don't think I've ever backed up my phone.

    If you get that screen then your iPad is in recovery mode.
    You will have to restore it on a computer using iTunes:
    Read this: http://support.apple.com/kb/ht1808
    Follow the instructions very carefully.

  • IMac won't boot up after latest update

    Hi
    I'm a newbie to this forum but any help would be greatly appreciated please
    We've had our iMac for 2yrs now no issues but when I went to do the latest update today it's gone a bit weird!
    I did the install and relaunch like I always do but when rebooting it got stuck on the white start up page with the apple logo and a circular timer
    Ive rebooted it several times and performed a PRAM and SMC reset but still same issue. The fan started to run fast but the resets seem to have solved that?
    Any ideas what's wrong and how to fix it please?
    Thanks in advance

    The reason Allan was asking what update is this will affect how it's handled. However without knowing I believe the most wise thing to do it take the machine into an Apple Store or AASP where they can help you. One of the most recent updates was a EFI update for 2011 iMacs. If your iMac is a 2011 machine (released after May 2011) and that is the update in question then the only recourse is taking it in as mentioned.
    There are a couple of things you can try though, first is restart using the Install Disk or if you are on Lion restart and when you hear the startup tone hold down the Option Key. Then choose Disk Utilities and run Repair Disk Permissions, do this 2x. Then exit DU and try to restart normally. If that doesn't work then try rebooting in Safe Mode, this will clear some caches. It's possible one or more has become corrupt. If neither of these work then definetely take it in.
    Finally please  please please complete your profile, use Your Stuff in the upper right of this page then click Profile and complete. This is vital to helping you. At this point we know nothing about your system, what version of OS X, which iMac, etc...

  • Problems syncing with Outlook after latest update to iphone

    I just updated my iphone 4 with IOS 7 and now it won't sync with Outlook. I would greatly appreciate help in solving this issue.

    I am having the same problem. I have edited my contacts in outlook and these edits are not being picked up on the iphone. Ill give you an example. I have removed all fax numbers in all of my contacts on my pc, in outlook. took me AGES. then I plugged my iphone in and two things happened (1) no changes were made to the contact on the iphone to mirror what i had changed in outlook (2) it seems as tho the fax numbers which were all stored on the phone are now all back in my outlook on my pc!
    how do i make it so that when u sync NOTHING from my iphone goes onto my PC but only what i have changed on my PC goes onto my iphone???

  • LG Spectrum doesn't hold charge after latest update

    About 2 weeks ago my phone automatically updated overnight.  I was surprised the next morning to find a different look on my phone and having to change things back to my settings.  Since then, my phone won't hold a charge for more than 5-6 hours.  It's fully charged when I go to work in the morning and by 12 noon, it's almost dead.  Anyone else having these same issues?  Anyone know what to do to fix it?  I've closed all programs.  The one program that it keeps saying is taking up the battery is Google Maps and I'm not even using it.  HELP! 

    Did you ever get an answer on this?  Mine acts the same way.....these phones are the biggest pain I have ever had.  The sales guy must have been getting commission on them when he pushed us into getting these specific phones.
    >Posted edited to remove Acronym<
    Message was edited by: Verizon Moderator ><

  • New battery won't hold charge after short usage

     Hello everyone
        I recently purchased a used HP nc6230 computer without a hard drive or battery. After putting a new battery and a hard drive into it I charged the battery installed the OS, windows XP pro, and used the system a few days and it worked fine. I followed the guidelines of the battery manufacturer to burn in or sync the battery pack without incident. Now a week later I turned the system on and it loaded windows, stayed on for about 2 minutes and then shut off. I hooked the charger to the system to charge the battery and the indicator light did not come on to show the battery was charging. I left it connected for about 20 minutes and tried to turn it on again with no success. Could this just be a defective battery or is there a problem withe this particular model computer? Any ideas? Thanks. 

    You just have an older battery that has limited runtime. Losing 32% in 30 minutes indicates you might get maybe 1:20 runtime which is about normal for a 2 or 3 year old battery. I suspect what happened before is that the battery completely discharged which is not really good for it and sometimes causes the whole system to lock up. If it ever happens again, remove the battery and do the hard reset before plugging in the AC adapter. I suspect you just need a new battery. Where did you get this battery? It may be "new" in the sense that it was never previously installed in a laptop but batteries for that laptop might be as much as 4-5 years old and they do lose power and capability just sitting on a shelf.

  • IMac won't boot up after latest update. Any suggestions?

    I just updated my software (the latest from apple), then my iMac won't boot again.

    There you go. Your HDD is failing hence its not booting. You need reformat the HDD
    To reformat, same steps: Boot to the install disc > get past the language selection > You will see Welcome to Blah Blah Blah > just hit continue > There should be something there called erase and install
    BUT
    1. if you are absolutely sure that Time machine has BACKED-UP all of your files then proceed above
    2. If not, if you have another mac: connect it via firewire then google Target Disk mode. Basically you want to copy all your files from the damaged machine to the new mac to serve as a backup
    3. if yo dont have another mac: get an external HDD, install Mac os X on it, boot to it then back up your files
    to do this
    a) Plug external HDD
    b) Boot to the CD restart and hold C
    c) Get past language selection and keep hitting continue
    d) when it asks you where you want to install Mac os X > select the external HDD
    e) once its installed. Restart the computer and hold "Option" key. You should now see your external HDD as one of the boot drives. Select that and you'll boot into it
    f) once inside the external HDD OS, you will see the internal HDD(damaged drive)browse/navigate through it and start getting your important files

  • Ipod won't fully sync after latest update!

    I have the most recent ipod and itunes update but it erased EVERYTHING off my ipod and didn't restore it. I lost over 3000 songs that now will not sync. It's backed up on itunes but now it's only syncing 200 of the 3000 songs. Majority of my music was imported from cds to the library and I don't have the cds anymore but, like i said, its on itunes. They play fine on itunes but how do I get it on to my ipod now??

    same here i downloaded itunes 11 last night and this morning i get an "error -42408" so altough my itunes recognizes my ipod, it simply wont sync and asks me to eject manually. I tried restoring and it still wont sync.
    here's a link with some solutions
    http://forums.macrumors.com/showthread.php?t=1499345
    macbook os x 10.6.8
    ipod touch 2nd gen version 5.1.1 (9B206)

  • My battery all of a sudden won't stay charged. Any suggestions?

    MY BATTERY WON'T STAY CHARGED ALL OF A SUDDEN.  ANY SUGGESTIONS?

    Try syncing again. http://www.technipages.com/itunes-how-to-copy-playlists-to-iphone-ipad-or-ipod

Maybe you are looking for

  • IDOC Number

    Hi All, Using a z program,does anyone know how to get the IDOC number generated using the sales order number. We have automatic output determination for this which generates the IDOC. This there a function module for this... Thanks in advance, Finbar

  • Connecting router to switch

    Hi all, I'm using packet tracer version 6.0.1 and I need to connect a switch to a router. My goal is to setup a very small LAN. So far I have two 2900 switches and a computer. The computer can ping each interface vlan IP of the layer 2 switches. The

  • Capturing errors

    Hi All, How to capture the errors  when Transaction SM50 is executed and how to put its details it into an internal table?

  • I have recently put in another hard drive into my system to hold my iTunes any tips on how to transfer the system easier?

    What is the easiest way tostill have my iStore and iTunes accounts and switch from my C: drive to my E: drive which is my new hard drive?

  • My jpeg file sizes are much larger than they used to be.

    Just recently the file sizes on my .jpeg files have become excessively larger than they used to be just a week or so ago. Where I used to go almost a week to need to archive to DVD a bunch of saved images, I've now got to save to DVD almost daily. Fo