BATTLEFIELD 2 HELP! Problems with onboard Soundblaster Live 24-bit 7.1 in Battlefield

with the hardware sound option selected, the voiceovers are totally stuttery, but all other sounds come through well. The reason im posting is because i was wondering if anyone had found a fix for the stuttering. Apparently Creative doesnt care about its customers and hasnt fixed it yet, so if anyone knows a "hack" or driver edit to fix it, please let me know. The hardware option makes such GREAT use of my 7. as opposed to the Software mode. Also, if there is no fix, how can i disable the Voice overs, because the option in the Audio menu doesnt seem to do anything. Thanks.

I have the same problem and no knows what to do is it a msi k8v diamond motherbord

Similar Messages

Problem with DTT3500 soundset and onboard Soundblaster live! 24-bit

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster live!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster live! 5.1. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5.1 surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster live! 24-bit?
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...?
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5.1 speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster live! 24-bit is an enhanced version of the soundblaster live! 5.1? Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt0104&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
I would apreciate any help, as i'm really stuck at the moment.

does anybody use the soundblaster live! 24-bit to power a surround speaker set? or is it just impossible? (for gaming)

I bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

i bought i pad 3 in canada 4 months ago but i think it's got problem with battery .i live in germany i don't know where to send it

Not quite what I heard when I went into the Apple Store in Hong Kong yesterday.
I have just bought an iPad in Hong Kong but will eventually be travelling back to the UK.
Louis in the Apple Store told me that iPads without cellular have international warranty but those with cellular do not (as there are slightly different models for different carriers).
But he was pretty cagey and essentially couldn't give a clear, straightforward answer. Which most Apple employees can't.
It is now a grey area, at the discrection of each local Apple Store & is subject, it seems, to you paying the import duty as a possible get out clause.
Look carefully but do tell us if you got this iPad reapired. Thanks.

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

How to produce 5.1 sound with logitech z5500 running on iMac 10.5.8 with sound blaster live 24 bit external.

First off your operating system version is obsolete and not being updated for security issues from Apple.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
So at least you need to upgrade to 10.6.8, and that will make your machine secure again.
However if you decide to upgrade further to 10.7 or 10.8, be forewarned your PPC based software of old is not going to work any longer. and your machine may require more RAM.
Check here to see and download the free MacTracker to see your machines true RAM potential and specs. There are videos online at YouTube, it's really easy to install yourself.
http://roaringapps.com/apps:table
I checked out the z-5500, apprantly the optical out shouldn't be a problem, however the surround sound decoding is a problem as the Mac doesn't do it, just passes it through for decoding on a receiver via the optical out port if your Mac has one.
Use the free MacTracker to find out or when you upgrade OS X, there is a option in the System Preferences > Sound.
https://logitech-en-ap.custhelp.com/app/answers/detail/a_id/9693/section/trouble shoot/crid/409/lt_product_id/224/tabs/1,3,2,4,5/cl/sg,en
The Sound Blaster Live 24 bit doesn't do Dolby 5.1 according to Wikipedia. More info on it is here.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&prodID=10702&pr odName=Live!%2024-bit%20External&CatName=Sound+Blaster
If it's able to accept optical toslink cable from the Mac's toslink stereo mini port (if it has optical output) and then send that to the z-5500 via the analog speakers, then you should be fine.
I'm afraid you'll have to do some more digging to get it to work.
The only surround sound your going to get is by playing DVD movies that have it, then it can't have Dolby 5.1 as the Live 24 bit can't decode it.
So do your research on what surround sound formats the Live 24 can decode, then compare your DVD collection for those movies that have it, then get it all connected and enable it on the movie preferences at the menu.
Good Luck

Problem with DTT3500 soundset and onboard Soundblaster live! 24-

Hi,
I have bought a new PC with an MSI k8n sli platinum MB. this mainboard has a built in soundblaster li've!24-bit chip onboard. it works great on headphones and normal 2 set speakers (analog connection).
however, when I try to set them up at the DTT3500 speaker set, trouble begins.
before continuing, just want to say First that my older PC is standing next to it, with a Soundblaster li've! 5.. If I connect with this PC to my speaker set, via the digital uitput, everythin works great. (5. surround).
In the DTT3500 manual, when Digital DIN is blinking, it says it isn't recieving any signal, or not the right one (like AC-3). (I know this when on my old PC when I switch to headphones, the digital din is then blinking, which is normal as I disabled Digital output in Windows)
now my questions:
Is this digital port is ac-3 signal or somthing else on the Soundblaster li've! 24-bit's
Do I need to use another type of cable, like SPDIF Din Cable? (I now have a minijack to Din cable)
I tried with optical, it works, but only with 2 speakers (left and right / digital output is on). is this normal? If i look at the manual, it's typical used for gameconsoles with stereo left and right. I guess this is so with the DDT3500 decoder...
if I try Digital Din on the Decoder, it doesn't work. the Decoder Led keeps blinking. Yet in Windows, digital output is on and 5. speakers is selected.
In short, exact the same setup on the Decoder and PC as my older PC.
My guess is the the soundblaster li've! 24-bit is an enhanced version of the soundblaster li've! 5. Am I wrong, I don't know....
I do know that the reviews said you could use the digital port (orange one)
here is a picture:
http://www.overclockers.co.nz/ocnz/reviewimage.php?id=05boardnf4sli00microstak8nslipt 004&file=panel.jpg
and here more info on it: http://www.overclockers.co.nz/ocnz/review.php?id=05boardnf4sli00microstak8nslipt0204
NOTE: Yesterday, I disabled my onboard Soundblaster Li've! 24-bit and plugged in my trusty Soundblaster Li've! 5. (Gamer). everything worked ok.
I would apreciate any help, as i'm really stuck at the moment.

can anybody help me?
thnx

My speakers won't work on my new computer with a Soundblaster live! 24

When I was in college, I bought a Gateway computer that came with with Boston Acoustics speaker model BA735.
Recently, I bought a new Dell computer with the Soundblaster Li've! 24 bit and my speakers won't work. I have an old set at my house that works fine, so I know the card isn't broken, but I'd prefer to use my own speakers.
I don't know if I have to download drivers or change settings or what, but this is a pain. I have found some of the same problems posted, but they are usually involving a gateway computer, so I don't know if I can download gateway drivers for my Dell computer, I'm not very good when it comes to these things. Any help you can give me I'd appreciate.

HI,
In most cases this is about the Internet Speed or the portion of it your computer gets that iChat can see at the moment it tests the speed during it's launch process.
That is to say that as you start up ichat it tests the speed it can see.
this can be effected by other computer doing a download and "taking" more of the Bandwidth or rather leaving a smaller amount for your Mac.
The same is true if your computer is already doing a download or using the Internet heavily.
Of course at that moment your ISP could also have cut the speed you get.
If you launch iChat and go to the Video Menu > Connection Doctor what does the Capabilities tab say ?
This may have red crosses against some items.
Also check iChat Menu > Preferences > Video Section > Bandwidth Limit
This should not be set at 100kbps fro Video chats.
Have you tried restarting the computer ?
6:54 PM Friday; March 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Write protection error with my soundblaster live

Running win ME and cannot fully install soundblaster software disk.Doing a complete install.When system reboots,blue screen with the "Write Protection Error".Have to shut down comp with power switch. Then when I turn it back on,it comes up in safe mode.When I uninstall soundblaster,comp comes back to desktop. I have also tried to install with win XP home edition upgrade with the same results. I have formatted my entire comp many times since I purchased Soundblaster li've 5.. Any help would be greatly appreciated.

Glennvi
Try moving the sound card to another PCI slot and then run the installation from the CD again. There is an article on Microsoft knowledgebase that cover the Windows error you encounter that you can refer to.
http://support.microsoft.com/default...kb;en-us;49962
If you are still having problem with that, you may like to contact Support for further advise.
http://us.creative.com//support/custsup/
Jason
Message Edited by Jason-CL on 0-5-2004 :09 PM

Problems with Onboard Sound

hello
I confiure the 915G motherboard with Intel P4 540 3.2GHz. But the main problem is onboard sound. Before i bought it, It advertise the sound quality is High Definition Audio 7.1. But now i use My creative speaker SBS370 2.1 speaker but the right channel is not produce any sound. What going on ? I already connect to my speaker with my TV. It's OK that both of the speaker produce good sound. How can i fix it ?
Can anyone help me ?
Joe_Lay

Quote
Originally posted by Joe_Lay
No..Sir,
It still not produce in right channel although i tried to make sure all the setting in Volume control & in the control panel ? When i slide to the balance to right it doesn't produce any sound... Left channel only produce sound when i leave it in the middle.
Another way to solve the problem ?? My board is 915G Combo. MSI - 7058 VER-1
with regards,
Joe_Lay
Please check, you have 3.5 fully inserted.
Del

Problems with SOUND BLASTER LIVE! DIGITAL

Friends,
I have a SB LIVE! 5. DIGITAL. My Windows XP SP2 detects my sound card but he dont know what card is, and i make a download of the lastest driver and he says: YOU DONT HAVE A SOUND BLASTER CARD>
I dont understand what happend, on Windows 98 works well, isn?t a problem with my sound card.
My computer is:
MSI K7N2 DELTA-L
MSI FX5700 ULTRA
768MB DDR 400 SAMSUNG
20GB SAMSUNG 7200
SB LIVE! 5. DIGITAL
DVD-RW LG 6X
I DONT KNOW WHAT TO DO!!!! PLEASE HELP!!!!

Trew,
Did this card come preinstalled in your system? If so this may be an OEM model and you will need to contact the company you purchased your computer from for drivers for it. If this is not the case you may try moving the card to a different PCI slot and trying the install from there.
Jeremy

H55M-E23 Problems with Onboard Realtek Gigabit NIC

I just finished a new build HTPC using the H55M-E23 and I'm having problems with the onboard Realtek Gigabit LAN controller.
System specs are: OS is Windows 7 - 64 bit. Intel i3-540 @ 3.0 GHz, 4GB RAM, 60GB SSD. NVIDIA GT 430 video card w/ 1MB RAM is only add in card. 300 Watt Power Supply. NVIDIA card is the primary video card and is set up that way in BIOS.
Everything installed fine and seems to work great, except that when I watch HD video, stored on a local NAS on my home network (all gigabit, including cables), about half the time, the Realtek controller will drop to about 10 MBPS, which causes the video to stutter and lockup. The video normally streams across the network at about 23 MBPS max. All other PC's on my network play these videos (home movies) no problem. CPU utilization on the MSI board is only about 5% and the video card's GPU utilization maxes out at only about 65% when the videos are streaming properly. Also, I can copy the video directly to the SSD on this HTPC and the video plays fine. So I think the rest of the hardware on the HTPC is sufficient to do what I'm trying to do. The truly annoying thing is that sometimes it works and sometimes it doesn't work.
All the latest drivers have been installed for the motherboard, video card, and Realtek NIC (trying both from MSI's website and Realtek's with the same result). The Windows installation is very clean. I've wiped the SSD twice and done a fresh Windows install and tried this immediately after the Windows install has competed and all drivers installed and again after Windows has completed all updates and I get the same result each time. I've tried several "slow network connection" solutions from Google and none so far have worked.
For anyone old like me, this acts like an IRQ conflict from back in the early days of Windows. Of course Windows 7 doesn't let you mess with IRQ's anymore, at least that I can find. BTW, Device Manager lists the IRQ for the Realtek NIC as "-2", which is very odd to me, but I'm no expert. I'm at the point now of disabling the onboard Realtek LAN and buying a cheap NIC to see if that works, but wanted to try to see if MSI has any suggestions or should I RMA the board? Any suggestions would be greatly appreciated.
Thanks,
Ben

Yeah, I agree that I'll need to upgrade the PSU anyway. 300W is marginal at best for this setup. I would have probably been ok without the add in video card, but the GT 430 really makes a difference compared to the built-in graphics of the i3 and the card was so inexpensive that it was a no-brainer. I may try to take out the GT 430 just to see if the Realtek NIC behaves better, but I think long term I'll just get a cheap PCI-e NIC and that should fix things.
I would normally suspect the SSD as well, but I get the stuttering when I'm using the network streaming. The videos play fine when running directly off of the SSD. I know the SSD could still cause issues, but everything just seems to point to the Realtek chip. Honestly, I really think it's a driver / setting issue and not a bad piece of hardware, although I could be wrong.
If anyone has any other ideas, please keep 'em coming. In the meantime, I'll try a new NIC, etc and let you know what I find.
Thanks,
Ben

Problem with Indesign CS5 Live Distribute

I have a strange issue with the new Live Distribute feature. When I first experimented with it, it seemed to work perfectly. However, now, when I click on one of the scaling squares and hold down the space bar, it only lets me distribute for about a second. After that, the cursor is frozen, and I have to let go of the spacebar and perform another distribution. This is really tedious, as it requires quite a few moves to make relatively minor distributions. I don't know if I inadvertently changed a setting which is causing this behavior. If someone could provide some guidance, I'd really appreciate it.

I don't use Live Distribute but you could try these standard trouble shooting tuips when a file is misbehaving, this one first then this one. Alternatively go to the help here which has a few links on how to use it.

HELP/Problems with pull-down navigator bar

Hi everyone,
I was wondering if I could get some input. I have just
re-designed our magazine's site, www.easternsurf.com
I used Pop-Up menu function in Fireworks 8 to generate our
Navigator bar. For the most part everything has been working well,
BUT we've had a couple of complaints that the navigator bar's
pull-down menus get stuck behind the photos/banner ads/etc. instead
of in front of them when viewing in Internet Explorer. I'm on the
Mac platform (OSX Tiger/Macromedia Studio 8) and have seen no
problems viewing in Safari, Firefox and Netscape. The only
complaints have come from Internet Explorer users. A couple of
people updated their browser to the newest version and the problem
disappeared, however we've still had a couple of people that have
written in that the newest version of IE is still not displaying
properly.
Also we've got a strip of button ads running down the left
hand side of each page and I've also seen another issue that's
common on sites of this type...when the pulldown menu overlaps with
a Flash element, there is a problem with the screen re-draw. I've
seen this on several other sites and know it's a common problem,
but does anyone know of a workaround where this won't happen? I
just noticed that signing on to Adobe's site, there almost seems to
be a command where the menu keeps re-drawing at a very rapid rate
so this won't happen.
Any input would be greatly appreciated, although I'm Mac all
the way, we are a business and have to get this site visible for
everyone!
Thanks

Hi Oldbudge,
Welcome to the Community,
Please Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.And see if that helps.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Onboard SoundBlaster Live 24bit probl

I just recently got a MSI nforce 4 motherbaord (platinum SLI) with onboard Li've 24bit. It works fine for low quality sound, but if i try and utilise it fully in games, like Halo, then it lags and only plays parts of the sound. I was wondering if it could be that the hardware it not fully accelerated but i'm unsure where to find that option.
I'm running XP with the latest drivers. Please help.
Cheers, Mcphie

i guess creatives products are just cack then! all i have read on these forums is how people from a variety of different soundcards, experience this pop and crackle noise. but yet, no proper drivers fix for most! and the fix they suggest rarely seem to work. certainly not for me!
quite frankly, im rather anoyed that creative are being allowed to get away with this. i for one will NOT be buying anything in your range again.

Help - problem with white iphone 4 speaker

Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.

irene sim wrote:
Hi, i have a problem with my white iphone 4 speaker. I know the specs stated that the mic is supposed to be on the left and the right is the speaker but i've compared at least 2 other black iphones 4s and there is some volume from the left side (if you close the right side) whereas mine is practically non-existent. Should i be concerned? Is this specific to the white iphone 4? The local telco has not been helpful - they can only reformat the phone and said that this is a software problem. Anyone with similar experience pls share. Thanks in advance.
You already know the answer. ALL iphones, every single one of them, have but one speaker at the bottom. You have NO ISSUE at all with your speakers. None. Nothing is wrong. At all. No problem. None.

BATTLEFIELD 2 HELP! Problems with onboard Soundblaster Live 24-bit 7.1 in Battlefield

Similar Messages

Maybe you are looking for