Batty going dead when lising to music

it started last night. when i am unplugged and lessoning to music my batty will go from being 90% charged to dead in 10 minuets. i have it set to run normal when on batty but i never had this problem before.

yes, you can get a new battery. Read:
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Read the complete article but here is an excerpt:
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Your problems are those of the type that are specifically mentioned.
Read it.
Do the update and then follow the directions for replacement if it does not solve the problem.

Similar Messages

  • My Iphone goes dead when down load new OS ?

    My Iphone goes dead when download os from Itunes

    Hello abdallaha,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning these issues:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Phone goes dead when it has just been charged

    my husbands phone goes dead just shuts off when he has just charged it. says like 95 percent battery and 2 seconds later goes dead

    User troubleshooting steps are restart, reset, restore from backup, restore as new.
    Restart, is powering the phone off/on.
    Reset is holding the sleep/wake and home buttons until you see the Apple logo and then release. The phone will reboot.
    Restores are done via iTunes.
    If none of these correct the problem, then make an appointment at the Genius Bar at Apple or with the Authorized Apple Service Provider, depending on where you live.
    Message was edited by: ChrisJ4203

  • My 15"MBPr goes dead when I plug in a TV over HDMI

    I have a 2014 15"MBPr. It is the version with the 750M. All firmware and software is up to date, all the cabling has been verified to be working.
    I use this laptop at a desk my lot. Until recently, my setup was a 24inch AOC display connected through an apple mini display to HDMI adapter. I leave the laptop screen open and run both. This has worked fine since I've had the computer. I have lots of other peripherals plugged in too these are as follows.
    Thunderbolt to Ethernet (meaning both thunderbolt ports are occupied. Wifi is not an option)
    USB3 Hub, which has my keyboard (A DAS Model S), my mouse (a Logitech Performance MX), my 3TB western Digital drive, and my focusrite scarlet USB audio.
    Recently, I bought a TV. It is a 42 inch Vizio, model number M422i-b1. I went and bought an HDMI cable so that I could use it as a display if I wanted to. I plugged the HDMI in to the TV on one end, and then in to the HDMI port on my mac on the other end. It worked fine, I set up the displays so they weren't all mirrored, and so they were arranged in the right way.
    I used the setup like this for an hour or two, then disconnected the laptop to take somewhere.
    I came back a couple hours later, and reconnected the computer in the same manner that I described above:
    Ethernet to one thunderbolt port
    Display out to my AOC monitor on the other
    USB out to all the other things
    Power in via magsafe
    After connecting it all up I tried to wake the computer, and nothing happened. The backlit keyboard came up, but all three screens stayed black. It seemed like the two external displays were getting a signal, but the signal was a black screen. Both external displays (The AOC and the Vizio TV) usually will say "No Signal" If they are not getting anything, but they were not saying "No Signal"
    - I tried a restart of the computer, nothing. All screens stayed black but I did hear a startup chime as usual. The grey screen and apple logo came up, but after that was finished loading all screens went black.
    - I tried connecting the displays after the laptop was up and running, I did the monitor first via thunderbolt and it worked fine, so I eliminated that as not being the problem. When I plugged the TV in via HDMI though, all the screens immediately went black.
    - After force restarting the computer again, I tried plugging the HDMI in to a different HDMI plug on the TV. The same problem persists with all four HDMI plugs. Then I tried leaving the cable on on the TV and pluggign the HDMI in to the computer when there wasnt anywhere for the computer to output to. Even without the HDMI port I want to use on the TV selected as the one I want ot use, the computer immedeatly goes black when I plug in HDMI.
    - Every time I force restart the computer, upon logging in (without the TV connected, computer will not even boot with TV connected) I recieve a message that says "Your computer shut down because of a problem, do you wish to continue?"
    - I have tested all the inputs on the tv with other devices (A windows PC and a PS3) and they all work fine. In adition the HDMI cable I am using is good.
    What should I do from here to fix the problem?

    Hello yatesteve,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue please follow the steps in the article linked to below, in the section titled "No video or no signal, image distortion, "snow," or flickering."
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Take care,
    Alex H.

  • BB8700 goes dead when dialing or receving a phone call

    My BB8700 dies completely (does not turn itself off; just clicks and goes blank; it is like it can't maintain connection with the tower while receiving or making a phone call) (and must re set itself) when receiving a phone call or while dialing a call, but only sometimes does anyone else had this intermittent problem and how did you solve it?
    it appears that it happens less whn the unit is being charged -- could the battery be somehow defective --everything else works AND the restrict my identity is off.

    If device battery goes to dead state too fast - consider the battery replacement.
    If device battery works ok - try to do the following:
    when device is on - remove the battery, wait a minute and turn it back to the device.
    Also make sure that the device internal memory is not full.
    It can be checked via Options - Status. 

  • 3g ipod goes dead when not in dock

    everything works fine when it's plugged into the dock. charging, menus, no problems. when i disconnect it from the mac it goes totally dead. nothing works. is this a battery issue? should i have it replaced?

    Just solved my mini low battery issue. My iPod mini was also not holding charge for long and I'd plug it in and it would charge to when it said full, but clearly wasn't playing as if it had a full charge.
    So, I plugged it in and if you click disconnect and leave it plugged in to the computer, the charging bar will appear. Perform a reset, which will not delete anything, by
    holding down the Menu and Select(middle)buttons. When the the apple icon appears it should start charging more.
    It turned out mine was not fully charge and seems to be resuming it's normal charge cycle. So, give it a try and let me know if that works for you too. Good luck. Btw, mine is a 4GB, 1 yr old 2nd generation mini.

  • Mouse goes dead when printer powered up

    I have a Beige, but recently was given an early G3 iMac, 233mhz processor, 288mb ram.
    I successfully installed OS 9.2.2 (starting with an OS 9.1 iMac disk..........the iMac had 8.6 on it) and updated the firmware; removed the hard drive, hooked it up to my Beige and copied some applications onto it.
    Everything works fine, except:
    When my Brother printer (USB) is turned on, whether plugged directly into an original USB port or through a powered hub, the mouse icon still shows and moves, but clicking it does nothing.
    This does not happen with the Beige. The printer works just fine plugged into the USB card or hub.
    I have tried 2 mice and two keyboards; I have removed all the Brother software and extensions from the hard drive and reinstalled from the Brother CD. I have gone to Brother's website and looked for updates....nothing.
    Any ideas?
    powermac G3 beige Mac OS 9.2.x G3 Minitower RevA 233mhz 320mb OS 9.2.2
    powermac G3 beige   Mac OS 9.2.x   G3 Minitower RevA 233mhz 320mb OS 9.2.2

    Hi James.
    Sounds like a hardware problem that could be unique to iMacs. It's probably best to drop in the CRT iMac forums and introduce yourself. Chances of finding a fellow traveller with a similar experience is greater there.
    Allan

  • My iPhone 5 with iOS 6.1.3 keeps crashing when the battery is only 45%.it goes dead then says the phone is dead,but when I plug in the charger it turns on instantly and the battery is 45%.please help someone!

    My iPhone 5 with iOS 6.1.3 keeps crashing at 45%!when my iPhone nears 45% from a full charge it suddenly says the phone is 20% then 10% then 1% and then it goes dead.when I plug in the charger instead of waitin a few minutes for it to turn on,it instantly turns on and says the battery is 45%!this is OK at home where I can keep the charger plugged in but what about when im on the go?PLEASE HELP!!!

    This is most likely faulty battery. Make Genius reservation or set up service and take or send to Apple for resolution under Warranty.

  • When I download music it goes to my Music folder...

    When I download music it goes to my Music folder, than I put it into iTunes,but in my Music folder I have categorys like Alternative, Hip Hop.etc..also tha same in itunes,Now when I put it the song into the category in my music folder iTunes than cant find it,,so I have to go and relink it again and its a pain in tha butt..I hope u guys understand what im saying..:) I Would apreciate any help.

    If you mean you first put songs into the top level of your My Music folder, then add them to iTunes by "add folder to library" or by drag and drop, and then you go back later and change the location of the file on your hard drive, such as putting it into a subfolder within My Music called Hip-Hop, then yeah, iTunes will loose track of the song and you'll have to relink it.
    The feature that I most want in iTunes is integrated folder management, so that you can do that within iTunes and iTunes would follow where everything went. But they don't have it. They have a feature where iTunes goes through and renames every file and generates its own folder structure (preferences/Advanced/General: check "keep iTunes folder organized", and set the iTunes folder to the top folder where you keep your music. Warning: this will immediately begin the renaming process). I don't like iTunes' folder structure. If iTunes were to be the only music player I would ever have for the rest of my life, it could keep all the songs in a single encrypted database and I wouldn't care. But it's not, and I do care.
    Here's what I do: I just move the files. Or I rename the files. I do this to too many songs to manually relink each changed file. Then I choose "add folder to library", and I choose my top level music folder, in your case My Music. ITunes will go through and add all songs that aren't already in its list, and for songs that you moved this will create two duplicate entries for the song, one new and good and the other pointing to an invalid path. Eventually, when iTunes tries to do something with the invalid song, such as play it, it won't find it and will put the exclamation by it, as you've found out. Before you delete the old duplicate bad entry, copy your star rating the the new songs, if you use them, and to keep your playlists intact, click through each one to see if there are songs with exclamations and replace them with the updated entry.
    To sort and remove all dead links at once, see this post:
    MacMuse, "Removing "!" / dead links in iTunes library", 11:37pm Oct 8, 2004 CDT

  • Zen 4GB Goes dead after a few hours of playing music & there is a patt

    Tried to search for but could not find the match.
    My Zen 4GB works?fine while playing for a short period of time (roughly <= 2hours). Bought the unit recently.
    It happened a few times (quite consistently) that when I play music for an extended time (roughly 2+hours) it goes dead and has to be reset.
    I tried to update the firmware but was told I had the same version as the one on the web.
    Your help will be highly appreciated.
    Thanks,
    Ahoy

    Are you "fully charging" your Zen?
    The battery charge indicator is fully green, not flashing and has a key/symbol within the battery indicator.
    Also,
    Regarding lithium-ion shelf life, one of our engineers recently met with a battery-house representati've. It has come to their attention that repeated charging and re-charging of a less than fully discharged Li-ion cell affects the battery "gas gauge" included with many devices. Over a number of cycles there is a resultant loss in accuracy. Frequently, the indicated remaining charge has little relationship to the actual amount of life left in the cell! Fortunately, according to the battery expert, the gauge will reset itself if the battery is allowed to completely discharge from time-to-time.

  • I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

    I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • I re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

    i re started my computer and re intalled itunes. all my music is on my iphone and i cannot get it back on itunes. when i try to sync it tells me i am going to loose all my music. i really don't wont to go through all my CD's again so can any one help

    See Empty/corrupt library after upgrade/crash or
    Recover your iTunes library from your iPod or iOS device.
    tt2

  • My Iphone goes dead; seems charging on wall; but when i tried to connect it by usb, it doesn't startup

    Hi;
    My iphone 4 goes dead; from yesterday it was working normaly but suddenlly it shut off; i get backup to restore the old version, but unfortunalty when i unpluged from computer it shut down, and refused to startup via usb again, i have tried to push on home button an power together for about 1 minute, but it didn't work,
    it works on wall but says activition required, connect to itunes, when i unpluged from wall, iphone shutdown and doesn't startup again with usb
    when i connected it on walls, it reset everything dates, clock and battery back to zero, even when i unpluged it with 100% charging battery, back to zero
    i hope anyone  can help; it is a bussiness phone to and i need it
    thanks in advance for any help

    Hi there starbaeza,
    You may find the information in the article below helpful.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    -Griff W. 

  • Plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....  i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....  pl

    i bought a locked at&t phone....
    i sent it to be unlocked... got back a dead iphone 5s...
    plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
    i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
    plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
    the laptop doe read my phone.....
    no ding.....
    the phone wont turn on....
    NOTHING
    can someone plz tell me what the **** is going on

    mariidb wrote:
    i bought a locked at&t phone....
    i sent it to be unlocked... got back a dead iphone 5s... {snip}
    the phone wont turn on....
    NOTHING
    can someone plz tell me what the **** is going on
    That's the problem.  That's what the **** is going on.

Maybe you are looking for

  • Creating a user prompt when a boolean control is first lached but not contiuousl​y showing while it is lached.

    Greetings, I need a boolean control that will write measured data to a text file while it is lached and do nothing while it is unlached (which is simple).  However, I also need it to display a dialog box when it is first lached to prompt the user to

  • Display in alv according to age group

    Hi Friends i have data in internal table I have to group it according to age i mean on age group Which Needs to Display in ALV so how should i group them in ALV OUTPUT like this : EMPNUM        EMPLOYEENAME          DATE OFBIRTH/AGE AGE GROUP: 0-29 9

  • Is bootcamp needed to run windows7 for Internet Explorer

    I would like to know if I need to load BootCamp to run Windows 7 so that I can also use Internet Explorer for working at home with Explorer-only websites.

  • KM Problem in Portal 7.3  JSF References

    Hi Everyone, I'm having trouble with references in my JSF applications. The application has been developed for Portal 7.0 but later on we decided to deploy it on Portal 7.3 . Our application uses KM for some stuff and at that point we are facing Appl

  • BAPI for MB1B transaction for 309 movemnet type

    Dear ABAPERs, I am using "BAPI_GOODSMVT_CREATE"  its working fine for only one record. If in internal table number of records r there. By looping that table paasing the record each time. First time its working fine and posting the document. But secon