Baulsc  help - Can a custom validator display a error in the UI dataTable

Hi balusc,
Pls refer to my post in the topic
"Can a custom validator display a error in the UI dataTable + jsf"
Give me a solution pls.
Thanks,
Ambika☺

avoid another thread for same ?
http://forum.java.sun.com/thread.jspa?threadID=5229577

Similar Messages

  • How do I get past "can't find valid dvd player" error?

    This is regarding a G4 powermac running Tiger 10.4.3
    My Sony dual layer DRX-720UL/T seems to work fine with DVD-ROM content. My kids use it for DVD-ROM games and I had no problem installing Tiger. Problem comes in when I open "DVD player" and get a "Can't find valid dvd player," error. They're connected via Firewire 400, and I've tried the USB link, just to see, but the same error comes up. I'm fairly certain that I viewed a DVD before upgrading to Tiger. The Sony is supposed to be fully mac compatiable, and even comes with Toast light 6. Again all seems to be well except for the fact that DVD player won't allow me to view a NTSC DVD. No matter how many I try.

    What drive was in this G4 prior?
    If you did not have a DVD drive, you need to use Pacifist to extract & install DVD Player.app; downloading or drag&drop won't work.
    Also, Sony drives are probably the worst when it comes to compatability; one specific model may work fine, and others not. This should be less of an issue in Tiger, but only if the problem is other than the optical drive firmware, about which you can do nothing (on a Mac), unlike Pioneer & NEC drives that have mac-based flashers available.
    If DVD Player was installed previously, based on having a DVD drive prior to Tiger install, you may want to try running the 10.4.3 Combo updater over your existing install.

  • HT201302 The laptop I was using to upload photos from my iphone is no longer good and I want to use my desktop instead but it is displaying an error that the iphone has no photos in it. How do I start using my desktop to upload my photos from my iphone5?

    The laptop I was using to upload photos from my iphone is no longer good and I want to use my desktop instead but it is displaying an error that the iphone has no photos in it. How do I start using my desktop to upload my photos from my iphone5, is there any software I need to download?

    Photos on the phone in the DCIM folder are those located in the camera roll. Photos that are synced to the phone from the computer cannot be accessed in this manner. They are synced and the only way to manage them is to connect the phone, go to the photos tab and un-select the folders you want to remove or go into the folder photos are located in and remove the photos you no longer want to sync. Then sync the phone and the photos will be removed.

  • Please help, can I restore a Aperture project instead of the whole Library?

    Hi,
    I really need some help, ok so I use Time Machine and backup weekly on my Time Capsule so I know my work is safe. But now here comes the question I just realised I need to restore some pictures but I do not know how to go about it. Do I have to restore the whole Aperture Library which is 40GB, or can I just restore a particular project or even much better just restore a picture?
    Thanks
    Catherine

    catchapman wrote:
    Hi, the one thing I do know is that Aperture keeps everything in the Home Pictures folder, but its all within the Aperture application.
    Those are two different things. It's likely all managed by the Aperture application, but the data won't be inside the app itself.
    But yes, if you can tight-click click on that folder, then +Show Package Contents+ and navigate to individual pictures from the normal Finder, you're not going to be able to restore selected items.
    iPhoto is similar, but has it's own special handling with Time Machine, where you can browse and/or restore individual items from the +iPhoto Library+ package.
    You might find some info in the Aperture forum.
    It's a bit cumbersome, but you might be able to restore the whole thing to an alternate location, then copy what you want from the restored package.

  • 23" Cinema Display: Can't disable MacBook display to use only the cinema?

    Hi,
    I just bought a 23" cinema display with the intention of using it exclusively while I use a wireless keyboard and just keep my MacBook closed. I notice that when I set the display preferences to "mirror," the quality of the cinema display reduces greatly, since it's only able to be set at the maximum display resolution allowed for the MacBook when mirroring. This seems to defeat the purpose of having the cinema display. So, I guess I have several questions:
    1. Can I close the MacBook without it going to sleep?
    2. Can I make the cinema display the primary display (with application menus, etc.)?
    3. Can I disable the MaBook display and use only the cinema display?
    Thanks,
    Stew

    1. Can I close the MacBook without it going to sleep?
    No, but if the power adapter is connected, you can wake it with the external keyboard or mouse (make sure wake-up is enabled in the Bluetooth system preference), and it will continue to run with the lid closed.
    2. Can I make the cinema display the primary display (with application menus, etc.)?
    Yes. In the "Arrangement" pane of "Displays" system preference, turn off mirroring and drag the picture of the menu bar to the picture f the external display.
    3. Can I disable the MaBook display and use only the cinema display?
    Yes. Close the lid.

  • Question about displaying handler errors in the webdynpro

    Hello all, Please forgive any EM terminology mixups as I am new to this unique module!
         Here is my scenario, I am in EM WebDynpro and updating the actual dates on a purchase req. The event handler accepts the date I entered and in the background makes a synchronous rfc call to ECC to update the related project with the new date. This rfc call fails because I have the project open and it is locked. This call is synchronous so I get the error right away and I set the return code to 4 and populate an error message that I want passed back to the user in WebDynpro. For some reason the EM system is ignoring this error and returning to the user a successful 'sent' message.
    EM WebDynpro --> Purchase Req --> PO Approved Actual Date entered --> synchronous RFC to ECC to update Project --> project locked error returned by ECC --> error message populated in EM --> EM WebDynpro returns as if it was successful
    I have put in breakpoints to ensure I was populating error messages back to EM and I see the details flowing back that are correct, but no details are returned to the actual user. If I go to the Event Handler Overview in the GUI I can find my error message recorded there. Problem is our users will be working from the Web primarily and would not see this message in a normal course of work.
    Is there a config piece that I should be setting to return this error to the users in WebDynpro? This seems like a trivial/standard piece of functionality so I am confused as to why it is not showing up in the dynpro.
    Thank you for any help or ideas and points awarded of course!
    John

    Hello Berthold,
       I believe we understand what you are saying we should do and we have mimicked the activity you described. Now we are running into a short dump when the system tries to process the RETRIEVE MSG method. The code is looking for the class /AIN/CLPUB_ID_CONVERT for some reason. This class does not exist in this release. There is a /SAPTRX/ class that matches.
    So in /SAPTRX/CL_PUB_ID_CONVERT method CALL_AII_FOR_SINGLE_ID at line 45 there is this statement:      CALL METHOD (co_ain_class_name)=>(co_ain_method_id_mapping). Since this is a dynamic class/method call we think we must have something still incorrect in the IMG so we are going through troubleshooting and looking at OSS Notes. No luck so far.
    Any additional input or ideas as to possible missed steps would be greatly appreciated.
    John
    PS Release 7 (SAPK-70004INSCEMSRV pack level)
    Edited by: John D Norman on May 6, 2010 2:00 AM

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • I am trying to make a Calculator in LabVIEW. I can't able to display decimal point in the output display and i can't able enter floating point numbers? Please help me.

    I am new to LabVIEW. Please provide the detailed information. Thanks in Advance.

    First thing to check is the representation of the indicator. Right click on it and move the mouse to representation. If it's not eithe EXT, DBL, or SGL, then the indicator is set only for integers.

  • Help my buddies custom icons dont show up only the aim guy does

    idk y but my buddies custom icons dont show up anymore only the aim guy does eomoen plzzz help me

    If you have more than one iChat account, like a mac and an AIM screen name, each of them only displays the buddies and their details that you have added whilst logged in with that account. You can check quickly if your other account displays the list as you were expecting by selecting the iChat drop down menu>accounts and check if you have more than one.
    If not, please post again.
    This is always handy to trouble shoot:
    http://a1408.g.akamai.net/7/1408/7780/20060628/www.mac.com/st/1/learningcenter20 060607/print/Tiger/UsingiChat_to_Communicate_Over_theInternet.pdf

  • Please help -can't uninstall or install iTunes  - Error code 2330

    I tried to open up iTunes 9.1.1 today and got a message that windows was trying to configure iTunes. Midway through, i got an error message: "An error occurred while attempting to create directory: C:\documents and settings\all users\application data\apple computer\iTunes\SC info.
    So i then tried to download the new version of iTunes (9.2), and got a message that "the installer has encountered an unexpected error installing this package. This may indicate a problem with the package. The error code is 2330."
    Then I followed the trouble shooting steps on the support site - deleted the Temp folder and then tried to uninstall 9.1.1. I received the same 2330 error message.
    Doing a search of error 2330 on this forum, I saw people recommending running a Chkdsk which I did. This repaired some errors, but it didn't help with the installation, I got the same error message.
    I have tried to call Apple support but apparently they don't support iTunes unless you're running it on a MAC. I'm upset and frustrated and at my wits end. I know next to nothing about computers, which doesn't help ;o) I'd be grateful for any suggestions...

    Many thanks.
    Okay, either the SCInfo directory (or the iTunes directory above it) has gotten damaged in some way. iTunes is detecting that when you try to launch it, and it is trying to do a repair install in order to try to repair the damage. But the damage in your case is enough to stop the repair install from going through. The same damage will be stuffing up the attempts to uninstall/reinstall/update iTunes.
    There's an alternate strategy we can try to get around this in cases where chkdsk can't fix the damage. But first we're going to have to adjust some view settings on the PC, because your damage is lurking down in directories that are hidden by default on Windows XP systems.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
    5. Click OK.
    Now we'll see to the file.
    In My Computer, open your C drive.
    Open the "Documents and Settings" folder.
    Open the "All users" folder.
    Open the "Application Data" folder.
    Open the "Apple Computer" folder.
    Rename the "iTunes" folder "iTunesOLD".
    Restart the PC. Now try launching iTunes again. Does the repair install go through properly this time?
    (If the iTunes Setup Assistant runs, don't add files to your library. Otherwise you may end up with a lot of duplicates in your library.)
    If you get iTunes launching again, check to see if any purchased music is still playing, and if any iPods/iPhones/AppleTVs etc are connecting properly. (We've forced iTunes to rebuild configuartion files and an iPodDevices.xml that affect some iTunes DRM/authorisation-related and device-connection-related machinery. So I reckon it's possible you might at least need to reauthorise some songs or apps or games after iTunes launches again.)

  • Can we customize popup display for error messages ?

    Can we apply styling like width and height to error messages that adf displays in popup

    Check this from the ADF Rich Faces Client Demo?
    http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/messages.jspx
    Thanks,
    Navaneeth

  • TS3999 I am receiving an error message "setup can't continue because outlook isn't configured to have a default profile" I have checked all defaults are on in outlook. Please help, can't sync my calenders or contacts, but the email works fine in outlook.

    Can't get my Icloud to connect to outlook. Error message - setup can't continue because outlook isn't configured to have a default profile.  Help! Can't sync my contacts or calender with my other devices. Email works fine.  Steve

    I've looked at the Microsoft support info and it doesn't reveal anything new. I looked up the eM Client software and have decided to give it a try. I've been using Thunderbird and Gmail for years, but the issue of keeping contacts in snyc accross platforms led me to try Outlook as supposedly compatable with iCloud. Thanks for eM Client tip. It seems to work well and I'll be testing it for the next few weeks. While I'd still like to be able to solve the issue with Outlook (I'm not used to being defeated by software), I've got plenty of other things to keep me busy and a working solution is the priority here.
    Thanks for the tip!

  • How can a custom tag write multiple fragments in the response ?

    I have a custom tag that needs to write at least 2 html/xhtml fragments into the response in order to be html compliant. The custom tag outputs a script that must be located in the head section and other elements that refers to the script.
    Events handlers of html input elements follow this pattern. The handler may need to refer to script functions defined in the head section of the document.
    Is it possible with the custom tag architecture to handle this scenario ?

    I don't think so, unless the tag wraps the entire page, but that's harder to do. Maybe a tag could wrap the whole page and you could have another inner tag that acts as a marker of where to put things (kinda like Jakarta Commons Tiles tags).
    Otherwise, you could use 2 tags and share data put in the request scope by the header tag in the subsequent body tags.
    Or since you are writing Javascripts with the one tag, you don't strictly need to put the JS in the head. Although I'm not sure about that restriction in XHTML.

  • Can I make icons display more text on the Desktop?

    The default size is 64 px by 64px (which stills seems huge to me) but the labels below each icon only display like 6 characters with ellipses in teh middle. It makes it very hard to identify files ... Any way around this without making the icons 128px?

    In the Finder view options (Cmd+J), increase the grid spacing to spread icons farther apart from one another. This will allow more text to appear on each line.

  • Help Can't Install Maverick "disk doesn't use the GUID Partition-"

    I have an imac and i'm using bootcamp fro windows 8.  so I have Macintosh HD and BOOTCAMP Partitions. both partition have Master Boot Record as the Partition Scheme.  When trying to install OS X Mavericks it rell me that "This disk doesn't use the GUID Partition Table scheme. ..." it tells me to use Disk Utility to select the disk ->partition -> select Volume Scheme and then Options... but option is grayed out... I can not change it and so can not install Mavericks... how do I solve the this issue without losing any data in mac and in windows? without deleting partitions if possible?
    thanks

    GUID is a drive map layout. You can only change it by opening Disk Utility, highlighting the physical drive and choosing the Partition tab. Then change the partition layout to anything other than Current. The Options button below that will then be active and you can then finally change the drive map from whatever it is now to GUID.
    Note that since you must repartition the drive, you WILL lose everything on all partitions. So you MUST back up everything FIRST to another drive. This can be a clone to another physical drive, internal or external. When you clone it back after repartitioning, the drive map does not change.
    To check your current drive layout, open Disk Utility and click on the physical drive you want to install Mavericks on. Example:
    Then look at the lower right of Disk Utility's box. If you see anything other than GUID Partition Table, as shown below, then you must repartition the drive.
    The other main problem is that you have to have another drive to boot to before you can change the one that needs to be repartitioned. Clone your current drive to another physical drive, not another partition on the same drive. Once the clone is complete, boot to that drive and you'll be able to repartition the drive you need to change.

Maybe you are looking for