BB 9300, indicator light will not stop blinking

Earlier today I received a call from a number that was supposed to be blocked in my Mr Number Callblock app, but came through anyways. Ever since, my light is blinking like there is something I need to check, but I have gone in and been through every app and even the hidden folders and can not find any notifications. I have done a hard reset. I am on 5.0 currently and there are no icons at the top of the screen or anything to show me what I need to check to turn the light off.
Any tips?
Solved!
Go to Solution.

Well good.
I love the unexplained resolutions.
Good luck!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Re: g6t-2000 loading circle next to cursor will not stop blinking

    I have the same problem.I got a blinking circle on my screen and every time this circle show up, i have to turn off my pc because don't let me do nothing. Any solution for that issue? My pc:HP ENVY Recline TouchSmart All in One - 27-k350 (ENERGY STAR)Número de modelo: J4W47AA

    Hi again Andieco, It is good to hear back from you! If your computer is not freezing when you are referring to a white circle, there may be an issue with the touch screen software installed on your computer. To correct this, I suggest re-installing all of the original software and hardware drivers that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), and then update the software by Using HP Support Assistant (Windows 8). If the white cursor will not stop blinking after performing the steps in the documents above, I recommend returning your system back to a previous restore point to before the issue occurred. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
    If the issue persists, please call our technical support by clicking the link below to get the support number for your region.
    www.hp.com/contacthp/
    I hope this helps!
    Regards

  • My ipod will not stop blinking!!!

    I just got this thing today and I am already having problems! My iTunes page says that the ipod has been updated and yet the actual ipod will not stop blinking orange. I thought it was a fluke but then the computer said that the songs that I put on the ipod was in use by another program. I don't know what it means but the stupid thing has been doing this for hours now. Can someone help me?

    Hi,
    This is a common issue with the windows computers. There is noting wrong with the iPod shuffle. The iPod shuffle is in use by the computer and the its programs.
    This will be resolved once the computer is restarted. Make sure that the iPod is connected to the computer while you restart the computer.
    After it is restarted eject the iPod shuffle from iTunes or My Computer.
    Post back if you have any questions.
    Santo

  • E72 notifcation light does not stop blinking after...

    After receiving an SMS my E72 sometimes keeps blinking the light even after reading it/deleting it. It's as if the notification gets "stuck". It also happens with calls but less often.
    This only started happening with 052.005, with previous versions where were no problems.
    Can anyone confirm this? Is it a problem in the current firmware or is just my unit needing a hard reset?

    zetty wrote:
    Hi
    Do you have the light active for any other apps or service on the phone like e-mail, missed calls, IM, etc...
    Only for missed calls or SMS/MMS. I don't have it on for email (as it would blink too often).
    Normally it would stop blinking as soon as I see a missed call on the call log or open/delete an SMS.
    But since firmware 052.005 now it sometimes does not blink right after the event is "cleared".
    I suspect it is a but as this version had some changes to the breathing/notification light behaviour due to asian languages (even if mine is european PT)

  • Battery indicator lights will not work

    For some odd reason when I push the battery indicator button on the left side there is no response (not even one light). According to the battery information in System Profiler the battery is in "good" condition with a cycle count of "66". Even when it is fully charged there is no response from the indicator lights. What is this attributable to? Thanks in advance.

    jtjax wrote:
    He also said that the battery is functioning properly and does maintain a full charge. 
    You can confirm this yourself by having the seller show you the battery information in System Profile.
    I'm just wondering if there is a serious problem and if I should pass on buying this a Mac?
    Again read the threads in the column to the right.

  • HT1515 My new Airport Express will not stop blinking an amber light.  What should I do?

    I can't seem to get my new Airport Express set up properly.  I've connected wifi cable from the modem, the USB printer cable and plugged in but it continues to blink amber. I've tried all the solutions mapped out in the instructions.  What could be wrong?

    Thank you so much for your reply.  I went over the AP utility and reread the notes and solved the issue!  Now, I need to solve a printing issue - I have two laptops, two Ipads and my Imac in my network and I would like them all to be able to print using my HP printer.  Working on that now!!!

  • My new AirPort Express router will not stop blinking

    I just bought a new AirPort Express.  With the help of Time Warner, he gave me a new Modem and hooked everything together which included  connecting router, modem to my husband's Windows PC.  Now, the PC works great.  My Apple IMac and Apple IPad work great and get the Wi-Fi very nicely.  However, the AirPort Express unit continues to blink amber/orange and I don't think that is right.  Should I do something or just leave it alone since everything is working great and I don't want to mess around the wires and cause things to  stop working.  Any help will be appreciated.  Thanks.

    Hello Peggy101
    Check out the article below for more information about amber blinking lights on an Airport base station. When you use Airport Utility and click on the amber light it will list out what things that need to be corrected. You may not need to correct anything and can ignore certain errors.
    Wi-Fi base station: Understanding and resolving a blinking amber status light
    http://support.apple.com/kb/TS1589
    Regards,
    -Norm G.

  • Screen will not stop blinking

    Screen is blinking and contains the following in plain text:
    SDRAM Full Test
    RUN: BL on
    PASS: BL blink
    FAIL: BL off
    Reset to continue.
    I tried connecting it to a power source and also to my computer and it still hasn't stopped. In addition, my computer isn't recognizing that it's even connected. I tried to reset it by switching the hold button on and off and holding down the Menu portion of the wheel and that hasn't worked either.
    What should I do?
    Please help!!! =O
    dell   Windows XP  
    dell   Windows XP  
    dell   Windows XP  
    dell   Windows XP  

    It can be a long list of items including being exposed to a static discharge, dropping it, getting it wet, overheating it, getting it too close to Bill Gates, feeding it pirated music, putting Blue Canyon Boys hardcore bluegrass on it, etc.
    Glad you got it working, enjoy your music.

  • My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
    1. Take off bottom case
    2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
    3. Press and hold power button for 5 seconds
    4. Plug a charger in, and it should start booting up
    5. After shutting down again, reconnect the battery and close the case up
    6. It works! (hopefully, if you guys had the same situation I did)

  • Dock icons will not stop running

    The icons on my dock will not stop running. They have the small blue light under them when in use but the light does not go off when I close the program. I have been quitting them by holding down the curser on the icon until menu comes up to quit. Help, please. Thanks, Arudi

    yup. bizarre. logged out of MobileMe and I try to move the Keychain Icon from the third on the left to the last on the right and -whoooo-oop - it slides back to the left. no fun. like having a gremlin moving books around in my library or something...

  • HT3904 Magic Mouse: new batteries, indicator light does not come on?

    I replaced the batteries in my Magic Mouse a week or so ago. The Magic Mouse stopped working today.  The batteries tested "'weak", but after I installed new batteries, the green indicator light does not come on.  What do I do next?

    Hello:
    I would try another set of batteries.
    If that does not help, reset the PRAM and SMC.
    Barry

  • My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

    I have the same issue.
    The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
    With a new battery the same happens, although it can run on battery but does not charge.
    It runs fine on mains power, the green light is always lit.
    I have tried several things so far:
    1. Cleaned the magsafe contacts on cable and macbook
    2. Reset SMC and PRAM
    3. Installed latest battery update
    4. Tried new battery
    5. Put old battery in fridge for an hour
    I work in IT and am fairly confident taking it apart, what should I try next?
    Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before.  Also some people say it will need a new logic/motherboard.
    Any experts here managed to sucessfully fix one of these?

  • Rebuilding aMacBook 1.83 GHz Intel Core Duo, hard drive failure so rebuilding system.  Aircard will not stop self-assigning IP address.  Any ideas how to resolve successfully?

    Had hard drive failure on MacBook 1.83 GHz Intel Core Duo, so had to rebuild the OS on new drive. Was on Lion 10.7.5 prior to failure, but had to reinstall Snow Leopard 10.6.3 since that was most recent OS on media I had.  After finally getting ethernet connection to router working, was able to get to internet and download / upgrade to 10.6.8.  I assume I can probably buy the upgrade to Mountain Lion 10.8 from there.
    Problem is this, Airport will not stop self-assigning IP address for my wireless connection, and unless I can get wireless back on this laptop, doesn't make a lot of sense to continue the rebuild and reinstall of all the software that was on it prior to HD failure.  Only way to my home network and router is ethernet now.  Everything else on my network (Apple MacBook Pro laptops, iPhones, desktops, and non-Apple printers and laptops) is hooking up to router wirelessly fine.
    Any ideas how to resolve successfully so that the airport will stop self-assigning and allow the router to assign the IP address?

    When see the beachball cursor, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My ipod touch will not stop playing music

    My ipod touch will not stop playing music. I will pause the music, leave the playlist, and after 30-60 seconds, the music starts playing again. I use my ipod when I run and when I drive (hook it up to the stereo). It is very annoying when I stop to take a phone call or listen to directions, turn off my music, and then hardly a minute into my stop, the music starts right back up again.

    FUEL1996, not correct. Apple does not allow one app to control another app.
    laurathecellist
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              

  • Itunes 10 will not stop auto syncing

    I have itunes 10 on a mac and a 160 gb ipod classic.
    it will not stop auto syncing when I plug in my ipod, even though "do not auto Sync" button is checked as well as checking off "do not open itunes automatically.
    It syncs FOREVER. I would love to find a way to stop this from happening. I dread plugging in my ipod to put on new music etc.

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

Maybe you are looking for