BB 9300 Signal sign is "OFF"

Hi,
Since yesterday i noticed my BB 9300 signal sign is "OFF". I tried switching it off, removing the battery and sim for a few seconds and switched it on again but still the same. I already went to my service provider to check on my sim but it worked on other phone. They gave me a new sim maybe the sim has the problem but when in used the new sim still the sign is "OFF". I even tried using a different sim but still it didn't work. What should i do? what is the problem?
Thanks
Anna
Solved!
Go to Solution.

Or, you can go to your Manage Connections screen > Mobile Network and turn on your mobile network there.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Just setting up iCloud on my iMac, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number stil

Just setting up iCloud on my iMac 10.9.2, my problem is when trying to sign out/off from iCloud it comes up with a verification code that is being sent to my land line, I'd changed the numbers in my Apple ID and they show as changed but the land line number still shows as number that the verification code is being sent, I prompt "Don't have access to this phone" and that's no help at all. The only way I can sign out /off from iCloud is to uncheck everything that I wanted to keep in the cloud????
Thanks in advance for any help.

Skip the iCloud sign in for now.
Once you reach the home page, go to settings and sign out of FaceTime and Messages. This should also sign you out of iCloud.
Go to iCloud in settings and sign in with the correct Apple ID.
If that does not work
Skip the iCloud sign in
Go to Apple ID.apple.com and sign in
Change your Apple ID to the old one
Delete iCloud account on your device with the old Apple ID and the same password.
Go back to the website, change your Apple ID back to the current one. You will receive an email to verify the account. Verify first.
Sign into iCloud on your device with the correct Apple ID and password

Hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

hi i jus hit the restore all button in my settings and my phone is getting a display signal of switching off and it lies in dat mode plz help me out

You need to perform a DFU Mode Restore of the iPhone with iTunes on computer. You must also have a SIM card of the original Carrier that this iPhone was produced for.

All of a sudden, the radio signal LEDs went off and node went dead

In order to change the I/O variable data type of my node from single to array of single, I simply press and hold the rest button on WSN-3202 for 7seconds. At the end of it, the radio signal LEDs went off and node went dead. All attempt to bring it back to life proof abortive. What should I do?
Blessing

Hi Blessing,
If you've tried everything to get it working, including a fresh set of batteries or direct power from an adaptor, then you should contact your local NI branch regarding the repair process. The contact information for your branch can be found on http://sine.ni.com/apps/utf8/nicc.call_me.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Why does cc keeps signing me off

trying to download adobe but it keeps signing me off. adobe help blamed my internet provider, my internet provider blamed my router, i have replaced my router and i still cant sign in.
please help

Welcome to Adobe Forum,
So try these steps:
1) Sign out of the Creative Cloud app
2) delete the opm.db file*
3) update to the latest version of the Creative Cloud app.
*On Windows 7, the opm.db file is located here:
C:\Users\YourUserName\AppData\Local\Adobe\OOBE
*On a Mac, go here:
[Userdir]:Library:Application Support:Adobe
You can refer to http://forums.adobe.com/message/5557147
http://forums.adobe.com/thread/1239510
In case the issue is still not resolved, then do contact Adobe at
http://adobe.ly/yxj0t6
Let us know if it helped you.
Regards

Icloud keeps signing me off every ten minutes

icloud keeps signing me off every ten minutes. computer is not set to sleep. everytime i check my mail i have to sign i again--Yes 'keep me signed in' box is always checked. not a big deal but very annoying----

Me too... very frustrating. What's the problem?

Why my WiFi signal keeps cutting off?

Does any one know why my WiFi signal keeps cutting off after I installed Lion?

If you hold down an "option" key while you pull down the Wi-Fi/AirPort menu bar item, what value do you see for "RSSI"?
It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort/Wi-Fi menu bar item to turn AirPort/Wi-Fi off, then on again.
2) Try to select your Wi-Fi network from the AirPort/Wi-Fi menu.
3) In the Network panel of System Preferences delete the AirPort/Wi-Fi item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort/Wi-Fi connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease". Note that the fix this step implements may be temporary.
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Ichat signs me off when ive been idle for a while

if i walk away from my computer for a while, my screensaver will go on, and then sometimes the screen might even go black & ''sleep'', & when i come back, ichat has signed me off.
is there any way i can change my settings to fix this?

Hi,
Sorry about the delay in any response.
iChat 4 will set you to Away as the Screen Saver starts.
If the Computer goes to sleep all network connections on a Mac are cut.
You mac may be able to restart from sleep faster than iChat can restart.
It may be that it will then consider the connection Dropped and you will have to Log in to AIM again.
Setting Energy Saver (System Preferences) to not let the computer Sleep may be the way around this.
9:18 PM Tuesday; January 29, 2008

When i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

when i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

Hi,
This is mostly about what is called Away as a Status and setting an Away Status Message when going Idle.
Idle happens when there has been no Keyboard or Mouse input for 10 mins.
(read as for any Input device like Trackpad, Graphics pad, Trackball etc)
The Bottom section of the General Section of the iChat Preferences is abouut what happens when you go Idle. (The Orange Arrow and Text in the pic Below)
(Your Status indicator will go Amber)
Some of this does depend if you have Set "Block others for Seeing me as Idle " in the Accounts section > Account Info Tab on AIM Logins.
It is also linked to Fast User Switching (your Mac User Account could go Idle whilst you are Logged in as another Mac User Account).
The Blue Arrow and Text points out you can make sure iChat stays at the Last Status (And Message) you used on Quit (The default is for this to be Ticked and iChat to change to Available).
The Red Arrow and Text is about whether you appear as Fully Off line on Quit and Sleep.
On Quit iChat does not fully log you out of the AIM Servers.
You will appear as Off Line to your Buddies but the AIM servers will keep Off Line Messages for you (well, if you have never replied "NO" to the first Off Line IM you ever got)
However it does seem that in certain Combos of these settings that you can "Seen" by your Buddies as Away rather than Off line.
Picture of General Section of Preferences
If you add in to this mix a shorter time than the Idle time to make the computer go to Sleep then you can also create other "states" as well.
So...
In it's default settings:-
1) iChat will always set you to Available on Launch.
2) At 10 mins of no input you will go Idle (Amber)
3) For Fast User Switching you can set iChat to go Off Line or to Go "Away" (A Status Message setting).
(It has been so long I forget what the Default was)
4) iChat is set by default to show you going Idle (See the Accounts section of the Preferences)
5) If you specifically set an Away Status (or Message) then iChat will do whatever is set in the bottom part of the General Section.
6) Sleep will put you Off Line and the "When I Quit iChat, Set My Status to Off Line" option will kick in
The Default is for this to be Unticked.
There is no setting to create going to Away if left alone.
I am not entirely sure on this one though as I think it can be created via "Second Pass" things.
Note:-
Example of Second Pass.
Go to the View Menu and the Sort Buddies option.
If you sort by First Name then the Buddy list is likely to Reorganise itself based on the Address Book Entries.
If you now Sort by Availability it will organise those First Names by Availability rather than reverting to what was set before.
(Screen Names Only Buddies will appear alphabetically in any list)
Now repeat by Sort by Last Name then Availability and you will see that the list is not in the same order as First Names and Availability.
At this point I am not sure exactly what you meant.
The Title bit implies that Sleep was/is getting in the way.
The actual question details leave me wondering what you think you have set iChat to do ?
8:40 PM Friday; May 6, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

Thanks for keeping us posted lizy7796. May I ask did the replacement device resolved the powering concern? Also, how much available device memory do you have after you restored your info onto the new device? If you have any additional questions then as always we're here to help.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

IE 8 Update = No BT yahoo sign on/off option?

I ran the executable to uninstall my old bt yahoo browser. On doing so it also deleted the BT yahoo Broadband sign on and off software. Consequently I now remain constantly signed in to my BT yahoo broadband account and have an active connection at all times with no way to disconnect. Signing in and out of my BT Yahoo email account no longer has any bearing on connecting to and disconnecting from the internet.
I am worried that this will result in my breaching the terms of my usage agreement. The BT Yahoo icon in the customized IE8 browser provides no option for signing on and off. How do i log out of my account and disconnect from the internet?

If I was you ....
I'd uninstall everything BT ....
Maybe except for the hub software, if you use one.
And either get the latest version 8 IE browser .... or the latest Firefox browser. (preferred)
Let windows configure your network, not BT software.
Save all your logon details before doing anything ....
And get CCleaner to clean your mess up afterwards .... www.ccleaner.com
It's free, powerful, and effective. .... if you have a mess already .... makes sense to do it.

Wireless Signal Flashing On/Off

Hi, the wireless signal on my MacBook keeps "blinking" on and off and I am unable to connect to the wireless provider i normally use. What could be causing this? It is strange because my other computer is connected fine. This has happened before and it eventually just stops and the wireless signal remains full. But I'm curious why this would be happening... anyone know?

More info:
Just booted back into Leopard. Sitting 1 metre from the Belkin AP, and still getting packet loss:
getafix:~ johngibbs$ ping 172.16.1.1
PING 172.16.1.1 (172.16.1.1): 56 data bytes
64 bytes from 172.16.1.1: icmp_seq=0 ttl=64 time=533.363 ms
64 bytes from 172.16.1.1: icmp_seq=1 ttl=64 time=2.424 ms
64 bytes from 172.16.1.1: icmp_seq=2 ttl=64 time=291.563 ms
64 bytes from 172.16.1.1: icmp_seq=3 ttl=64 time=55.201 ms
64 bytes from 172.16.1.1: icmp_seq=4 ttl=64 time=272.656 ms
64 bytes from 172.16.1.1: icmp_seq=5 ttl=64 time=34.345 ms
64 bytes from 172.16.1.1: icmp_seq=6 ttl=64 time=11.042 ms
64 bytes from 172.16.1.1: icmp_seq=7 ttl=64 time=32.551 ms
64 bytes from 172.16.1.1: icmp_seq=8 ttl=64 time=51.944 ms
64 bytes from 172.16.1.1: icmp_seq=9 ttl=64 time=9.620 ms
64 bytes from 172.16.1.1: icmp_seq=10 ttl=64 time=29.732 ms
64 bytes from 172.16.1.1: icmp_seq=11 ttl=64 time=10.026 ms
64 bytes from 172.16.1.1: icmp_seq=12 ttl=64 time=186.801 ms
64 bytes from 172.16.1.1: icmp_seq=13 ttl=64 time=86.103 ms
64 bytes from 172.16.1.1: icmp_seq=14 ttl=64 time=746.532 ms
64 bytes from 172.16.1.1: icmp_seq=15 ttl=64 time=7.174 ms
64 bytes from 172.16.1.1: icmp_seq=16 ttl=64 time=224.493 ms
64 bytes from 172.16.1.1: icmp_seq=17 ttl=64 time=161.922 ms
64 bytes from 172.16.1.1: icmp_seq=18 ttl=64 time=20.619 ms
^C
--- 172.16.1.1 ping statistics ---
20 packets transmitted, 19 packets received, 5% packet loss
round-trip min/avg/max/stddev = 2.424/145.690/746.532/195.534 ms
Web browsing performance is a bit poxy as well. All was fine in Vista.
JG

Apple ID keeps signing me off.

My Apple ID that i use to sign in to the store/iTunes match etc... keeps logging me off. And shutting off iTunes match and when i reenable i have to download my tracks again. Why do I have to continue signing in on a multiple day basis.

This might help you:
- Go to iTunes, choose Music in the lower left conrner, scroll down on that page and log out from your Apple ID
- Double tap you home button and close all application that´s running on your iPhone
- Go to Settings > Safari > Clear History and Clear Cookies and Data
- Open App store, download a free application and enter/verify your information

Signal bar shows off instead of bars

Hello everyone... new with Blackberry... I have a 8350i and suddenly the signal bar shows the word off instead on signal strenght bars and the NEXTEL word wit upper and lower cases... I have read something that tells me that maybe I switchet by mistake to an inactive line.... any Ideas.
Thanks
Solved!
Go to Solution.

Find the Manage Connections icons on your homescreen, and there you will enable (checkmark the box) for Mobile Network.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS1702 I am trying to down load EARs but the down load sign is off

Hi friends...I am trying to down load App EARs but the down load sinfn is off. Any solution.Thanks

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

BB 9300 Signal sign is "OFF"

Similar Messages

Maybe you are looking for