Bb 9800 torch on 3 UK will not accept username and/or password for email setup

Fair winds and kind landfalls

Hi all; still trying to set up emails on my Torch.
Using a Curve it is fine.
Pull the  3 SIM and put into the Torch.
Boots up fine.
Phone works fine.
Email setup > enter username ( my main email address  ************@aol.com ) > enter password ******
BB throws up ! message says username invalid - must contain at least 4 characters.
HELP PLEASE!! 
e
Fair winds and kind landfalls

Similar Messages

  • After power on will not accept name and password

    Having trouble with MacBook Mac OS X 10.6.8
    At start up will not accept name and or password. Gives IP address info then network accounts unavailable.

    Hi Beebop1991,
    I'm sorry to hear you are having issues with your Administrator User account and password.
    It sounds like your computer is booting up to a network drive instead of your Macintosh HD.
    If this is the case, follow these steps:
    Startup Manager: How to select a startup volume
    Follow these steps:
    Turn on, or restart, your Mac.
    Immediately press and hold the Option key. After a few seconds, the Startup Manager should appear. The Startup Manager scans for available available volumes.
    Use the left and right arrow keys on the keyboard to select the volume you would like to use.
    Press the Return key on your keyboard to start up the computer from the volume you selected.
    If this does not resolve your issue, and you need to change your Administrator password, follow the steps below for Snow Leopard:
    OS X: Changing or resetting an account password
    In Mac OS X v10.6.8 or earlier, follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
    Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed).  Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
    Choose a language, click the arrow button to continue,
    Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
    Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
    Mac OS X v10.3: Choose Reset Password from the Installer menu.
    Tip: If you don't see this menu or menu choice, you're probably not started from the disc yet.
    Note: The default keyboard layout is U.S. English while started from the installation disc. If you use a keyboard layout other than U.S English, use the Input menu (the flag icon on the right side of the menu bar) to select the desired layout before typing a new password.
    Select your Mac OS X hard disk volume.
    Select the user name of your original administrator account.
    Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.
    Enter a new password.
    Click Save.
    Click the red button in the upper left corner to quit the application.
    Choose Quit Mac OS X Installer... from the Mac OS X Installer menu.
    Click Restart.
    After following these steps, you'll want to also follow the steps in this article.
    Mac OS X v10.6: Resetting the original administrator account password on a Mac that has no optical drive
    These steps require a second computer that has an optical drive.Note: If the second computer is a Mac, make sure Mac OS X v10.5.3 or later is installed. If the second computer is a PC, make sure the DVD or CD Sharing Update 1.0 for Windows is installed.
    Open "Remote Install Mac OS X" from the Utilities folder.
    Follow the onscreen instructions.
    For more information, see Sharing DVDs or CDs with Remote Disc.
    Additional Information
    You can press the Eject key on the keyboard to eject DVD media.  Inserting a startup DVD will add that DVD to the list of startup volumes (as in the image above).  You can also attach FireWire or USB external hard drives to add to the list of startup volumes.
    This startup volume selection is temporary.  To set the default startup volume for your Mac after your computer is running, open System Preferences and choose Startup Disk from the View menu (in Mac OS X) or open the Boot Camp control panel (in Windows).
    I hope you are back on track soon!
    - Judy

  • When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

    when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

    Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Premiere elements12 will not accept ADOBE ID that worked for photoshop elements 12, help

    premiere elements will not accept ADOBE ID that worked for photoshop elemets 12

    katmama
    From one of your prior threads, you appear to be working in Windows 8.1 64 bit with your Premiere Elements 12.
    Where are you when you say that Premiere Elements 12 will not accept your Adobe ID - are you at the Sign In dialog step of the end of the
    installation? Whatever the location, what is being rejected or not recognized specifically - can you tell if it is the Adobe ID or password?
    Are you working with antivirus and firewall(s) disabled?
    Please check out the following troubleshooting steps and let us know if any of them worked for you
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
    Do you have more than one Adobe ID with Password Account?
    We will be watching for further developments and will have more comments based on your reply.
    Thank you.
    ATR

  • Device will not accept my ID or password.

    my new apple tv device will not accept my ID or password. entered correctly.

    Welcome to the Apple Community.
    Which password won't it accept.
    Have you had any error notifications about time or date.
    Are you properly conected to the network and don't have a 169.x.x.x address

  • I recently backed up my iPad and then I restored it to factory settings. Now, I want to restore it from the back up that I created, but it will not accept my Apple ID password. Is there any way that I can save my data?

    Hi,
    As I have said in the title, I was supposed to do a restore on my iPad for work. I backed up the device and then I restored it to factory settings as I was instructed. Now that all of that is complete, I tried to restore it from the back up point I created and it will not recognize my Apple ID password.  I really hope that I won't lose all of my data, but I don't know what else to do. I have tried entering my password numerous times. I really hope that someone can help me.

    Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
    Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

  • I recently restored my iphone. When i tried to set it back up, it will not accept my apple id password.  Yet I can sign in the the apple store using the same apple id and password.  How do i get my iphone to accept my apple id?

    I recently restored my iphone.  When attempting to set it back up it will not accept my password.  Yet when i log into the apple store i have no problem logging in using the same apple id and password.  How do i get the iphone to recognize my apple id and password?

    Try This...
    Close All Open Apps... Sigh Out of the Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    More Info Here  >  Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367

  • Itunes will not accept my apple id password in the store.

    when I enter the store in itunes 11.0.1, a message popps up telling me to enter my password to enable automatic downloads. When I enter the correct password, the same message pops back up instantly. If I enter the wrong password, it tells me so in red. I can not do anything with the store, because it will not accept my account. I can purchase on other devices with the same account and password with no problem.

    You may need to do a credit card "update" in your account.  Apparently "it" needed a re-verify because I had accessed my apple account from another computer.  Did so and it worked. Apple is opaque in many ways and it was totally unhelpful as it just kept rejecting my good password with no explanation.

  • Itunes will not accept a valid security code for my debitcard

    Itunes will not accept my debit card info it keeps sayin that my security code on the back of my valid card is invalid.. Ive looked online an ive done what other people had said to do but nothing worked

    You have to make sure your iTunes address and your cards billing address are exactly the same (including capitalization and spaces).
    Or you could just run off gift cards.

  • Hp envy 4501 Printer will not accept my e-mail password

    I am trying to print from e-mail but the ePrint will not accept my gmail password.

    Hi @Beckyl
    Welcome to the HP Support Forums. I see that you would like to add your Gmail account to the HP ePrint app.
    Please try using the settings below to add your Gmail account to the HP ePrint app. Please note that you will need to have two-step verification turned off. If you are unsure how to do this, please follow the steps in Google’s Turn off 2-Step Verification document.
    POP Settings
    Email:          your personal @gmail.com email address
    Description:    can be whatever description you prefer, it can be something as simple as ‘GMail’
    Password:       this is the password you use to log into your GMail email account. It is important to exactly enter the password as you set it up including capital letters and special characters.
    Host Name:      pop.gmail.com
    Port:           995
    SSL:            On
    Please let me know how things turn out.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Express HD Upgrade will not accept Express V1 serial number for install

    Hi,
    I've been using FCE V1 for a while now, and just purchased FCE HD as a personal Christmas present Unfortunately it will not accept the (legitimate) serial number from the V1 product during the installation, so I'm stuck at this point. Is there any trick that I'm missing here, or does the Upgrade only work from V3 or V2 serial numbers?
    Thanks,
    Graham
    Mac Mini   Mac OS X (10.4.3)  

    I have found with some software (don't remember if that included my upgrade to FCE HD or no), that sometimes, the SN in printed in lower case on the sticky tag, but the upgrade will only take upper case (or visa versa). Try using the other case if it doesn't work.
    Also, you need the serial number from the sticky tag which came with the software. The SN display in the "about FCE" splash screen is incomplete (missing at least three letters/numbers at the end).
    Ed

  • HT202157 Itunes will not accept id and password?

    With the change in software the Apple TV will not accept id or password. On the computer both are acceptable.

    Did you create a new Apple ID or did you change the email address that is your Apple ID?
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621
    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

  • ITouch says connect to iTunes, itunes will not accept it due to password.

    My iPod touch has a screen with a USB cable pointing twards the iTunes logo, and I assume that means to connect it to iTunes. When I hook my iPod up to my computer, however, iTunes gives me a message saying "iTunes cannot access this device because it has a passcode lock on it." The problem is, however, that I cannot type the password in on my iPod, because it will not move from the "Connect to iTunes" screen.

    Bump. Help needed PLEASE.

  • I just installed Firefox Beta on Nexus 7, will not recognize my E-mail/password for my Firefox account Why?

    I have a Firefox account on my computer using Windows 7, I have a username/password with a gmail E-mail address.
    I installed Firefox Beta on Nexus 7, tried to log-in will not allow me to says the username/ E-mail already in use Duh! but I cannot log-in or register with my E-mail Why?
    I set-up a sync account a couple of years ago but have not be using but I still have the account info, Have not tried because I cannot sign-in to firefox. Help not sure where to look for a reply, E-mal address is [email protected]

    To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the new ID.  If you only changed your ID and didn't create an entirely new ID, you can choose Delete from My iPhone when prompted.  Your data will download back to your phone when you sign back in.
    Save any photo stream photos that you want to keep to your camera roll before deleting the account.  Deleting the account deletes the photo stream photos from your phone.

  • Login screen will not accept special characters in password

    So, I have a domain account that has a password that contains the character created by pressing ctrl and Backspace key. I have found that if you attempt to type that character at the windows login screen, it will not recognize that. If you remote desktop
    to the pc from any version of windows, it will allow you to type in that character and logs in fine. If you went to change a local users password by using the Computer management mmc, it will allow you to enter that character.
    How is it possible that this was overlooked, and is there a likelihood of it being fixed?
    I'd like to point out that this occurs in windows 8.1 also. I have a large base of bilingual users that have Spanish and other characters in their passwords that have worked up until now.

    Hi,
    If i understand you correctly, you could not type the special character at the windows login screen in windows 8.1, but remote desktop could. Am i right?
    According to my test, the same result.
    So i think you could remote to the pc and change the password:
    http://support.microsoft.com/kb/149427/en-au
    Regards.
    Vivian Wang

Maybe you are looking for