BB 9930 Bluetooth Pairing Issues with 2011 Prius

I'm having a bluetooth pairing problem with my Blackberry 9930 staying connected to my 2011 Toyota Prius. It pairs fine and then some time later it will dial randomly or disconnect or freeze up. Toyota says it is a common problem with the new Verizon Blackberry phones. Went to the Blackberry forum and there are plenty of posts where the same problem is occuring on a variety of late model autos with the 9930 and no response from RIM.
Is there a patch out there to address this issue?? Is Verizon addressing this issue with RIM??
Thank you,
Richard

I have the same problem with my 2011 GMC Yukon Denali (great truck BTW). I go to make a call and it dials out and connects with the end user but I can't hear them and they can't hear me. I manually turn off the bluetooth connection on my phone wait for the disconnected from Yukon message and then turn it back on. Once I get the connected to Yukon message, I can place the call and it works fine. Then randomly, it'll stop again and I'll go through the same procedure. It's a pain in the neck (or other body parts)!
When will Verizon (RIM) have a fix out for this? I've seen it in quite a few posts on the Internet so this problem seems pretty widespread.
Thanks

Similar Messages

Aurvana Bluetooth Pairing Issues with Mac OSX

Have Creative Aurvana Gold headphones and they pair with iOS devices pretty easily; however, on my Mac (OSX Mavericks latest) they now refuse to pair/stay paired. I've tried deleting the device from the Mac and re-pairing several times. Also rebooting, etc. Nothing seems to work.
The initial pairing goes perfectly and then after 20-30 seconds or so the connection drops. Battery is full. Tried powering the headphones on/off a million times, rebooting countless times, etc.
In Mac OSX Console I see this set of messages every time:
7/24/14 11:19:58.952 AVRCPAgent[4618]: Plugin path: '/System/Library/CoreServices/AVRCPAgent.app/Contents/PlugIns/' not found.
7/24/14 11:19:58.959 AVRCPAgent[4618]: Setting the delegate returned 0
7/24/14 11:19:59.040 AVRCPAgent[4618]: New AVRCP data: <10110e01 48000019 58100000 0103>
7/24/14 11:19:59.040 AVRCPAgent[4618]: [parseSTATUS] VENDOR: Events Supported
7/24/14 11:19:59.040 AVRCPAgent[4618]: [parseSTATUS] packing in vendor-spec headers...
7/24/14 11:19:59.105 AVRCPAgent[4618]: New AVRCP data: <20110e03 48000019 58310000 05010000 0000>
7/24/14 11:19:59.105 AVRCPAgent[4618]: [parseNOTIFY] registering for notification: 'Playback Status Changed'
7/24/14 11:19:59.247 AVRCPAgent[4618]: New AVRCP data: <30110e03 48000019 58310000 05050000 0001>
7/24/14 11:19:59.247 AVRCPAgent[4618]: [parseNOTIFY] registering for notification: 'Playback Pos. Changed'
7/24/14 11:20:14.821 Drive Mounter[614]: Attempt 6
7/24/14 11:20:15.000 kernel[0]: [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0xb
Sometimes the headphones will stay paired if audio is playing at the time they are paired, but I can't be certain that's the reason.
UPDATE: While they are connected I can't really listen to anything / play videos. YouTube just hangs for example. And the console now shows a ton of these messages:
7/24/14 12:25:16.000 kernel[0]: ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][clientDied]
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][clientClose]
7/24/14 12:25:16.000 kernel[0]: [0xffffff8080a72000][free]()
7/24/14 12:25:21.000 kernel[0]: ### ERROR: opCode = 0x0406 (Disconnect) -- send request failed (err=0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
the headphones are connected: I see a steady blue blinking light on the multifunction button on the earpiece.
What can I do to fix this?

It's a third-party application. I suggest you contact the developer for technical support. These forums only provide support for Apple products.
The application may simply be incompatible with the version of OS X you are running.

IPad mini retina won't bluetooth pair - even with Apple products!

my brand new ipad mini retina 128 doesn't bluetooth pair - even with an apple chicklet keyboard (or other keyboards or even with my iphone 5s)!!!!
what a joke
I've read posts and tried resetting ipad, bluetooth, peripherals, etc
any suggestions? again, totally weak on apple's part

Also, iOS devices will not pair with any other iPhone or iPad as you have found out. They are designed to be paired with bluetooth keyboards, stereos, headsets and, for thethering only, phones and computers.

Wacom or Bluetooth Mouse issues with most recent Beta??

Wacom or Bluetooth Mouse issues with most recent Beta??
All I was wondering if anyone was having issues with Lightrooms beta and pointing devices… while I’m sure the Wacom Introus4 is dying in Lightroom I can’t verify that my Mouse is as well.
I’m using the most recent Beta of Lightroom and Wacom Tablet Driver 615-3a… I’m sure the issue dosent reside with another program because the tablet only stops working in Lightroom. Basically I loose all tablet functionality until I reboot whin I attempt to access the Film Strip… I’ve repeated a few times and with each it dies…

Unfortunately, although you are getting problems with your Wacom and Lr, the solution for the short term is to re-install an older driver for the tablet until Wacom come up with a new update to fix the prolem. This has been a long running problem for users when operating Lr with Wacom tablets.
(I offer this solution not from personal experience, but from what other tablet users have reported in previous threads, and there have been several).

Bluetooth buggy issues with iphone 5s after ios 8 upgrade

I am having issues with my Handsfreelink in my 2013 Honda Pilot after the ios 8 upgrade.Basically, music works the phone does not.
What I have tried:
1) Hard reset
2) deleted and re-setup all bluetooth settings on both phone and car
I suspect this is a bug in ios8 that needs to be addressed. On a sidenote I am also unable to plug my phone into the USB port on the car, now says unsupported.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

Jaguar - Blackberry Bluetooth Pairing Issue

My new 8100 Pearl recognises the hands-free kit in my 2007 Jaguar X-type ("Jaguar" shows on the Bluetooth paired devices screen), but the pairing won't complete through to connection. The dealer confirmed that other phones will pair with the Jaguar touch screens. The Jaguar touch screen reads "No BT Phone" and never connects. I noticed someone else had a similar post back in June 2008 but no one ever replied with an answer. It seems that I have the same issue. Any help would be greatly appreciated.

Hi jeetenderbatra,
Welcome to the support community!
Are you able to sucessfully pair your BlackBerry Curve smartphone with any other Bluetooth enabled devices or other BlackBerry smartphones? If not, do you also see the same issue with the Bluetooth passkey disappearing during pairing?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Bluetooth Integration with 2013 Prius causes Z10 to go unfunctional

Got a new Prius and tried integrating the Z10 with the Toyta Entune system for hands free via bluetooth.
The Entune system wants to discover music as well. I keep getting a error message on my Z10 handset saying cannot discover media file types. Click the "OK" button and the error message keeps repeating. This annoying error completely takes over my phone and does not even let me even go to any other app in the phone or even make a phone call. I had to basically turn off the bluetooth connection from Entune system to get my phone working again.
Prius is a popular car.. Am I the only one who has observed it so far? Current OS build on my machine is 10.1.0.2039.
Please help

Hey maheshws,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Have you tried connecting a different Bluetooth device to your BlackBerry Z10?
Also have you tried connecting a different Bluetooth device to your Toyota Prius?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Iphone pairing issue with Pantronics Explorer 360 headset

I've seen some posts with similar issues but I've been unable to find a solution.
I'm unable to pair Iphone with the Plantronics Explorer 360. I'm following Plantronics installation recommendations and have been trying to pair for 2 days. The Iphone just keeps searching and searching and can't seem to locate the headset. Any advice?

Hope you were able to solve your Bluetooth-Plantronics 360-iPhone 3G problem. I had the same problem, and like a dummy, I sat there watching my iPhone 3G search, and search, ...and search. Turned off the iPhone. Turned off the 360. Multiple times. Tried again. No luck. Finally, while both were on, with the Plantronics device blinking red and blue and the iPhone showing "Plantronics 3XX" "searching" "not paired" I reached over and touched the iPhone screen. The Plantronics line immediately turned blue, and the two paired. The iPhone was apparently waiting for me to select the Plantronics 360, which, of course, in retrospect, makes absolute sense. Maybe I was just tired. Or stupid. Anyway, good luck...I hope by now you've solved your problem.

Bluetooth Related Issues with Car kits regarding webOS post 1.4.0.

We are trying to collect data for all customers that are having issues related to pairing their Palm Pre to car kits, however this data is spread among tons of threads and many different boards. To resolve this we would like to consolidate this list down to one board and tell you up front what information we need.
If you are having issues around using Bluetooth with your Car Kit please post the information in this thread.
Please also use this template so it is easiest for us to extract this data
Make/Model:
Year:
Carkit Model info (Manufacturer, firmware version, etc):
Details of problem: (e.g. pairing drops, static on the line, buttons mapped incorrectly, etc)
webOS version:
Included in compatibility list:
To find out if your carkit is listed on Palm's compatibility chart see here
http://kb.palm.com/wps/portal/kb/common/article/50373_en.html

Make/Model: BMW 325I
Year: 2006
Carkit Model info: Latest firmware for the 3-series.
Details: Will not connect with bluetooth carkit. Both bluetooth and Pre discover each other but does not connect with each other. The Pre shows that its connected with the car but the car does not connect to the phone.
webOS: 1.4.0
Included in compatibilty list: Yes
It connected and paired up fine before the update to webOS 1.4.0, had no issues with 1.3.5.1. The phonebook functionality also worked fine with the previous version of WebOS

N8 bluetooth pairing issues

I have recently purchase a pair of sennheiser pxc 310 bt headphones. Now whilst i am able to pair them with a nokia C6, I am unable to do so with my Nokia N8. I am running nokia belle refresh on my N8. I get a message telling me that the phone is unable to pair with the headphones. Same story with a galaxy s3. It does not not even give me an option to enter the pairing code on both of them. I've also noticed that the C6 bluetooth menu has way more options and settings than my N8. Pleeeeasssee help me!

It may be a Sennheiser problem....
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general. No solutions seem to be given.

TS5167 Same issue with 2011 MBP

I have a similar issue with a 2011 MBP and note that there is a considerable number of posts referring to this issue. Is completing a feedback form the best way to raise this with apple?

http://www.change.org/en-AU/petitions/apple-inc-replace-or-fix-all-early-2011-ma cbook-pro-with-graphics-failure

Graphical issues with 2011 iMac and Lion

I have a 2011 27" iMac (core i7 and AMD Radeon HD 6970M 2GB) with 2 external displays, most of the graphical issues are present in the external displays but the menu bar, dock and volume popup all appeared distorted on the main display.
On the external display most apps look like this http://i.imgur.com/FQ0AJ.png
there are a few exceptions like steam, safari and itunes, these apps don't show any distortion apart from when being switched the the other displays though, almost all other apps apear disdorted (as shown in the image) on the external displays.
I never had these issues with Snow Leopard but as far as I can tell its some kind of graphics driver problem, don't know how this wasn't spotted in the beta..
More images:
http://imgur.com/bK3jBl&RSaix
http://imgur.com/bK3jB&RSaixl

I also have a 27 in iMac Core i7 3.4 with the 2GB Graphics Card.
I called apple care and informed them + I recorded a video of it happening with ScreenFlow and sent it to apple. Please call apple care and inform them so they escalate this issue.
When I called them they sent me a file to Capture the Data of my computer to see what happened and what caused it.
By the way this computer should be able to connect with 6 screens simultaneously.
Please if you are experiencing this issue write here to inform apple about and call apple care or see the genius bar.
Thanks

Ios 5.0.1 + Iphone 4 bluetooth connection issue with car stereo

My Iphone 4 will not connect with my new JVC car stereo I have spoken to JVC customer support and they say its an Apple issue that they need to fix (changed something with the bluetooth connection scripts in the latest update update, as they have done before).
The phone finds the stereo and then tries to pair with it, however half way through the pairing process the phone losses connection with the stereo and the pairing is then deleted.
I have deleted all the existing pairing in the phone memory and ensured that the stereo has been rebooted to ensure no conflict of previous installs would effect the process
Does anyone know if Apple are going to fix this glitch in a new softwre update (and if so when is it being released) as at the minute i have an expensive stereo which is cant use to its full ability?

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

Bluetooth connection issue with car stereo

Hi,
I have a N8-00, with the current belle software on it.
With my car Bluetooth it will connect and function properly when I first add the device (N8) to the car Bluetooth, but if I turn the ignition off and then back on again it won't pair, if I try to manually do it, it just comes up with error without a code.
Deleting the device and trying to re-pair it wont work unless I restart my phone, and I am unable to turn Bluetooth off on my phone until after restarting it.
This is getting very frustrating.
Please help!!

Similar problems occured when Apple released iOS 4 last year. It was NOT fixed with an update from Apple. It was fixed by the system vendors and automakers releasing updates for their equipment. There are ongoing complaints from people with some Toyota built cars (Toyota and Lexus) with some systems as well as some BMW drivers.
I'm willing to bet money that the head unit you have is not fully standards compliant. Unfortunately, getting JVC to admit that is going to be nearly impossible. I suspect they will just quietly issue an update sometime in the next few months. Assuming the head unit can be updated by the end user at all. You may have to resort to an inexpensive visor mount speaker phone in the mean-time.

BB 9930 Bluetooth Pairing Issues with 2011 Prius

Similar Messages

Maybe you are looking for