BB Bold 9000 connection problem on a MAC

Hi,
I saw a lot of posts talking about that connection but I didn't find any relevant solution which could help me solving my problem.
I tried to connect my BB Bold 9000 on a MAC using the USB cable but nothing happens as if the MAC didn't detect my Bold. The physical connection seems to work correctly because the Bold receives power from the MAC.
I installed PocketMac and the latest drivers (downloaded from http://na.blackberry.com/eng/services/desktop/mac.jsp) but PocketMac doesn't see my Bold too.
The Mass Storage Mode is activated on my Bold.
I tried to connect my Bold on a PC using  BB Desktop Manager and the connection works correctly.
I also connected a Blackberry 8320 on my MAC and the connection worked directly. The Blackberry Mass Storage immediately appeared on the creen and then the synchronization worked correctly using PocketMac.
The problem seems to be between the Bold and the MAC. I installed the latest drivers on my MAC but the problem is still there.
Do you have any idea to help me because I really need to be able to synchronize my calendar between my Bold and my MAC.
Thanks in advance if you can help.
François

my service provider is ATT I called their technical support since still within a month then after a long unsucesful conversation with them they were able to transfer me directly to BB support is actually called Reseach in Motion. They have work laborously on my case. Unfortunately seems like I am only run 10.4.11 and can't upgrade that may be my case. but if you just got your phone I strongly reccomend you call your provider. My 1st problem was that it was not even recognizable now I can tell is hooked up but it just won't Synch properly. There will be a new software release soon that "supposed" to fix some of the problems with newer systems. GOOD LUCK, hopefully you got better luck than I do. They are still working on mine!
but they sure are helpful!

Similar Messages

  • Bluetooth 3.0 connection problem with keyboard - Mac OSX 10.6.8

    I have a white Macbook running OSX 10.6.8, which I cannot get to pair with bluetooth 3.0 keyboard. Recognises the device but cannot pair. I have deleted bluetooth plist, done a full reboot, reset PRAM, and checked that all software up to date. Have the same problem in pairing the KB with my daughter’s MBP (running Lion).  The keyboard pairs with windows laptop,  iphone, and ipad OK. Any suggestions?

    Dear KatheeG,
    Please uninstall HP software and install Full HP software for Mac OSC 10.6:
    http://ftp.hp.com/pub/softlib/software10/COL30072/​oj-74785-1/HP_Installer_Photosmart_Full_Group01_10​...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Blackberry Smart Card Reader 7250 and Blackberry Bold 9000 connecting and pairing

    As the subject line states, I am trying to connect and pair the Card Reader with the Device.  I am unsuccessful in following the steps to Pair the Device with the Card Reader.
    When I attemp to Click Connect from the Security Options/Smart Card/Registered Reader Drivers/Blackberry, and after I enter the reader ID on the device I receive an error "Connection to unknow device fail"  and then it tries to connect 2 more times, and I receive the error "Unable to connect your Blackberry Smart Card Reader. Please verify that the reader is turned on, that you have correctly specified the reader ID, and that the reader is not alreadt paired with another Blackberry.
    Could someone provide some assistance?

    I've received the same error. It's a known issue with a batch of new readers.  I called RIM and they said an updated software package should be made available online in the next day or so which will address/resolve the problem.

  • Hello ...  I have a problem with a wifi connection speed on my mac pro ... the problem is that in one room the internet opening for the websites is extremely slow ... but when i move the mac pro somewhat to other location ... the internet speed increase

    hello ....
    my connection problem on my mac pro is :
    that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
    but when i move the mac pro to another location ... its internet opening speeds up ....
    also in one room ... web opening delays .... but on other rooms it is normal
    so what can i do to solve this problem ....
    Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
    thanks for you all ...
    Waiting for your support ... as quick as possible ...

    WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
    Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
    The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
    If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
    https://www.open-mesh.com/

  • Internet connectivity problems. Conflicting IP address?

    For the last few months I have been experiencing significant internet connection problems on my mac mini. Although at times my connection is ok, the majority of the time I'm suffering from what would best be described as an "intermittent" internet connection. It seems that my internet connection is constantly cutting out for short periods of time before re-establishing itself.
    I'm connected to the internet via a wireless network (netgear router). There are also two windows machines (one laptop and one desktop) and a PS3 connected on the same network (also occasionally there is a macbook connected to the network too).
    I've been with the same ISP for over a year now and previously had always experienced a good connection, also all the other devices connected on this network seem to have fine connectivity so I doubt there is any problem with my service provider.
    It could be a coincidence but the emergence of the problem seems to have conincided with my flatmates purchase of a laptop. When my flatmate first connected his laptop to the internet I received a message on my mac mini stating there was an IP address conflict, although I have not had that message again and I seem to suffer from bad connectivity at all times, not just when my flatmates laptop is turned on! Could these to issues be related?
    I'd be very grateful for any advice on how to resolve this issue as it's getting to be a very significant problem, thanks in advance for any replies...

    Also try using the open dns servers instead or your ISP's. System Preferences>Network. Advanced>DNS. Click on + and add the following: 208.67.222.222 and 208.67.220.220. Hit Ok,then Apply.

  • BB Bold connecting problems

    BB Bold 9000, BDM version 7.1.0.32, Windows 7 64 bit Professional, antivirus (DrWeb) and firewall (Agnitum Outpost).
    When logging in as an Administrator, synchromization works, BB connecting to PC instantly, so the cable, firewall and antivirus are not causing any troubles. No problems.
    When logging in as a User, BDM displays "Connecting" with green ring turning. Waiting for 20 minutes - nothing happens at all, no connect (sign "Connecting" is still there). The problem came out recently - about a month or so ago. No sofware installation, save some ugrade of exisiting software.
    What could be the reason of such behavior of BDM / PC?
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    If the software was installed by Admin, but not properly shared to all users, and then if the update was done in a different manner, that could have confused the rights within Windows, causing this odd behavior.
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having. You may want to do everything while logged in as Admin, as well as use "Run As Admin" for all that you can. You may also consider installing it while logged in as the user, if it's only that user who will be using it.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem Blackberry bold 9000

    I have a blackberry bold 9000 and I have a problem. LED blinks continuously. BBdesktop shows me this error: <a href="http://tinypic.com?ref=qwytkg" target="_blank"><img src="http://i47.tinypic.com/qwytkg.png" border="0" alt="Image and video hosting by TinyPic"></a>
    Who knows how to make it or what to do to me please respond.

    You might have to reload your OS. There appears to be a problem with it, otherwise BlackBerry Desktop Software should be able to connect to your phone.  If you have problems getting your phone to connect to the software, have a look at this article:
    http://www.blackberry.com/btsc/KB10144
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • BBBOLD 9000 CONNECT TO BOOT ROM PROBLEM

    Hi Everyone,
    I tried to upgrade my BB Bold 9000 to 5.0, BUT WHEN CONNECTING TO BOOT ROM, THE BB FAILS AND REBOOTS, PLUS I CANT UPGRADE WITHOUT THE BATTERY IN THE BB. :-[ IM STUCK, PLEASE HELP ME!
    I have attached the  error message
    error message gave me some option i tried that tooo but still the same problem.
    Someone please help
    Thank You
    Apperciate.

    Are you able to upgrade via wi-fi? Have you done a patch upgrade before using the same Desktop Software/USB cable/PC? I have never seem this error so I'm trying to pinpoint were exactly the problem could be. I'm suspecting you might have had problems on your previous upgrade or you installed a corrupt application? I'll keep in touch.
    Thank you for the question (I hope you have backed up all of your important information)
    Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Try my apps:
    The Ultimate Currency Converter and T2G - BloGFeed

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • My Iphone and Ipad wouldn't appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?

    Neither my iphone nor my ipad would appear in itunes when i connect them to my mac. I have already upgraded my itunes to the latest version. I have no problem synching my ipod to itunes using the same mac though. Could it be because I am using an older mac? (Mac OS X version 10.4.11)?

    You need to be using a Mac OS X version at least as new as the one given in the device's original system requirements.
    (74595)

  • I need to download dell drivers to a jumpdrive connected to my iMac.  Will this cause problems with my Mac?

    I need to download dell drivers to a jumpdrive connected to my iMac.  Will this cause problems with my Mac?

    Thanks.  These drivers are for the audio, etc. for a dell laptop I purchased used.  ( Needed something cheap for a training video that would only run on Windows.  Tried Emedia player but picture was too fuzzy.)  Dell support said I should contact Apple support for instructions on how to get the drivers onto the jumpdrive.  Any tips on doing that?

  • Learning about Bold 9000 and Mac Power Book

    I bought a BB Bold 9000 in Panama with instructions in Spanish.  I am now trying to use it in the US (although I will soon be back in Panama).  I would like to make more use of the E-mail features in combination with my Power Book and to move pictures from the BB to the Power Book.  Right now I am stymied by the instructions that I am getting from BB (both on the device and on this web site).  
    Can anyone suggest how to synch my two puzzling non-communicating devices?  I have not received any e-mails on the BB since Christmas.
    Thanks (gracias)
    The Panama Kid
    The Panama Kid

    Hey paulkimmel,
    Welcome to the BlackBerry Support Community Forums.
    Can you clarify the issue you are having with your email? Do you currently have an active data plan with your service provider? 
    You can use the Mass storage mode option to copy your pictures to you Mac: 
    How to enable or disable mass storage mode on the BlackBerry smartphone
    http://btsc.webapps.blackberry.com/btsc/KB13564
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Midi connecting problems: using Logic Express 9 with MBox 2 interface and a Mac OSX 10.6.8

    I have a Mac OSX and I use Logic Express 9 on it. I also use an MBox 2 digidesign. Im having trouble connecting midi and getting it to work from my Roland Keyboard Midi, to the back of my Mbox 2 Midi. Its just not working at all. Does anyone know how to make Midi work with the Mbox 2 using Logic Express 9 on my OSX 10.6.8

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth

  • My problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

    my problem started when i connected my iphone5 into mac book and i started restoring data, by that i lost my recent photo's ,i tryed a program but it was recovering the previous photo's not the recent once ... need ur help what to do plz....thank u

    Not much you can do.  You overwrote your current data with older data when you restored the phone from that backup.  Your data's gone.

  • HT4628 some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

    some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

    Just confirming, when you have the trouble, the wifi icon is grayed-out or has all bars showing? I believe you are saying that is is grayed-out - not connected to your wireless router.
    I have a Mini that started to lose connection to the Internet after the 10.7.3 update but still showed the wireless as connected. If I pinged the wireless router, I would get a quarter of the packets failing to return. The router was a Netgear that supported 802.11N connections. As a test, I set it to 802.11G (54MBps) maximum and the Mini worked fine for a week - no dropouts. And for the other devices that did support 802.11N, while there was a noticeable delay with downloads and pages loading, they still worked.
    As another test, I changed the Netgear router to a Billion 802.11N model and the Mini has not had a problems since. (It is still using 802.11g). So it could be your router that is causing trouble for your Mac.
    Have a look at some of the More Like This postings in the right column. There has been a number of Mac owners experiencing wifi connection issues and some very good suggestions as to how to resolve their issue.

Maybe you are looking for

  • Making an ISO of the Bootcamp drivers?

    I partitioned off 20GB, installed XP Professional SP2 (it is a full-install 32-bit, not an upgrade) using Bootcamp Setup Assistant, and all worked fine. However, when it boots into Windows so I can install the Apple drivers off the Mac OS X install C

  • Http to bpm scenario

    my scenario is i have to create an order in SAP R/3 system for which i am first doing credit check in SQLSERVER and then creating an order in SAP R/3 system.i am using BPM in this scenario. when i am executing my scenario,in sxmb_moni i am getting "s

  • Oracle Golden gate compatibility

    Hi, We are trying to decide the use of Golden Gate in our project, but I have not been able to determine if our database and OS are compatible and supported. We have IBM DB2 UDB v.8 with Z/OS 1.11 I have downloaded the Certification matrix (http://ww

  • I get an error message saying extension cannot be installed as it requires dreamweaver version in range of inclusively between 12 and 15

    As of today I am unable to update extensions as it indicates dreamweaver version in range of inclusively between 12 and 15 is required.  I uninstalled/reinstalled DreamWeaver and also uninstalled/reinstalled extension manager, that did not resolve th

  • Adobe Flash crash fix not effective on all sites

    I'm running Firefox 3.26.28, which has suited me fine. Yesterday I made the mistake of "upgrading" to Flash 11.3 & met the endless crashes described elsewhere. Figuring that returning to Flash 10.3 might get Firefox working again, I uninstalled 11.3,