BB Curve 9220 not reading the memory card

Hello,
I have a Blackberry Curve 9220
v7.1.0.746 , Platform 9.50.0.80
1 week ago I was using this phone and that time i didnt have a memory card in this device. I opened wechat and it showed either to insert memory card or to disable usb mass storage in this device. I didnt have a memory card that time, so, i tried todisable the usb mass storage and I did that.
Today, I inserted a memory card in this device, it shows that "Media Card is presently not inserted in this device"
When I searched the internet I got some solutions. They showed that to enable mass storage mode and check media card support on.
I turned Media Support set to ON.
I have made sure that the media card is formatted and inserted properly.
BUT
When i pressed the option (BB Logo key) button , it didnt show the option to enable usb mass storage. It just showed these options : "Switch app" ,"Select Text" , "Save" , "Help" , "Close".
There is no option to enable usb mass storage and it is not reading the memory card
Please tell me what to do !
Thankyou

Hi Manabb04
Enable or disable USB mass storage mode
If you connect your BlackBerry smartphone to your computer using a USB cable but does not appear as a drive on your computer, you may need to activate the USB mass storage.
On the Home screen or in a folder, click the Options icon.
Click Device> Storage.
Press  > Enable USB mass storage.
If necessary, type the password for the smartphone.
Your smartphone appears as a drive on your computer.
To disable USB mass storage mode, press  > Disconnect.
BBM Channels PIN: C0007093A
Do not forget to give LIKE   Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

Desktop manager for mac will not read the memory card

I have a Storm and the desktop manager does everything correctly except it will not recognize the media card for music. It says "please insert a media card in your device." Ive got the 8GB microSD card and it shows up in the phone memory but i cant load any music from my computer.

OK, I spent an hour and a half on the phone with RIM support this morning trying to fix this very thing with SUCCESS!!! Here is what you need to do. Keep in mind that this fix can only be done on a PC and NOT a Mac. Sucks, but its reality. Click on the link below and make sure that the PC your doing this on has the BB desktop manager installed on it. I went to my dads house and used his PC. After the tech and I learned that the DM has to be installed before you start the fix we were able to resolve the problem and the DM on the mac recognizes the media card. I'm also able to see the BB1 and BB2 icons on the desktop now so I can drag and drop if I want. I hope this helps you all. If you need additional help with this please ask. I may not be the most tech savy person here but I may be able to help a little. Here you go:
NOTE: MAKE SURE THAT THE DESKTOP MANAGER IS INSTALLED ON THE PC YOUR USING FIRST. I ONLY INSTALLED THE ENGLISH VERSION WITHOUT MEDIA SYNCH (to reduce download size and time) AND IT WORKED GREAT.
http://www.blackberry.com/btsc/documentLink.do?externalID=KB19717
Follow the directions to the tee and it should work fine.
PS: If you have problems with your blackberry and you cant find the fix here or on CB call your carrier tech support. If they cant resolve they are pretty quick at getting RIM on the case and resolving without you getting charged for it. Verizon was helpful at that and when I spoke with BB tech support they were extremely helpful. I was very impressed.
I hope this helps all of you with this problem. Good luck out there!!!!

I have an iphone 3GS. i updated it to the latest software but it can not read the sim card plse help me

i have an iphone 3gs that i updated thia evening to the latest software but the problem it could not read the sim card plse any help

Your iPhone was hacked to unlock it. Now that you have updated it has cleared that hack and is locked with the original cell provider. Call AppleCare and give them the model and serial number and they can tell you the cell provider it is locked with. Then contact that cell provider and see what their unlock policy is and if you qualify.

Good .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

Typgood .. I would like to work together I have an iphone 63gs 16gb, I do not read the sim card in itunes gave him the option restore and now I get on the screen that you can not do iphone activation would help me. I'm from Colombia

Activation requires a SIM card.
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

My 6500 slide could not read my memory card!

Hello everyone,
My 6500 slide works fine until now. All of sudden, The phone does not read my 1 GB memory card. It said "No memory card found" when I try to check phone memory. Data storage also not available. Please help!
sondang

Take the back of the phone off.
The window in the back, which has the cover for the lens, has a rim around it. Part of this rim is raised up - this is the contact to enable the phone to see the memory card.
What happens over time is that the case on the phone may become compressed and the contact gets flattened down.
What you need to do is slide a thin flat blade scredriver under the raised part, and carefully twist the blade to raise the contact upwards, very slightly (~1mm).
Put the back of the case back on the phone.
Worked fine for me!

Laptop will not read any memory cards

Laptop Model: Satellite P500 (PSPE8C-026006)
I have tried several times to get this memory card reader to work. At first, I tried putting in a memory stick PRO Duo with the memory stick pro adapter (so that it could read it), and I was getting a "File I/O" error and that the stick had to be formatted. I tried again with several other different sticks and got the same error. I then tried to update the drivers for the device and still no luck. But now, the memory stick is not even being detected at all.
Could someone please give me a good link to the latest driver for this memory card reader + how and where the device will appear on the Device Manager list so I know it's properly installed.

Satellite P500-026 (PSPE8C-026006)
(Windows Vista Home Premium 64-bit)
Card Reader for Windows Vista 64bit, 2.0.06A, 6/24/2009
O2 Card Reader Controller-2.0.06A.zip
My card reader (in a Lenovo machine) is under PCMCIA adapters in Device Manager.
-Jerry

Music player not refreshing the memory card in Nok...

Hi All,
I have , once, removed my mobile phone from data cable without safety remove and there it gave me lot of troubles. My facebook was not able to be connected through the provided application and my music player stopped working as and stopped refreshing saying that "File corrupted"
Finally. i removed my memory card, formatted it and made it worked.
Nokia should consider fixing these issues as we respect them a lot and think that they are still the #1 hardware vendor and will keep giving us good options than Samsung - android and will compete with apple phones.
Thanks,
Madas

It already states that removing your cable without properly ejecting the device will cause problems with the software and memory card inside your device.
This issue is user side removing the cable early. To prevent further corruptions, please safely remove hardware from your desktop.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Power based Profile or Losing sight of the Memory Card

When my Blackberry 8310 is plugged into its USB cable and I've put the password in to enable the 'memory stick' it operates a different sound profile. ie, the ringtone used for phone and text notification changes.
I think it is something to do with whether the Balckberry OS can or cannot see the memory card but I've not been able to determine the exact rules. It seems to lose site of the ring tones on the memory card when enabled so uses a ring tone other than the one I've set.
I've looked for user instructions or further guidance without any luck so thought I would post on this forum to see what expereince others had.
Regards

when your device is used as a memory card reader, the memory card is accessible by your PC only.
=> your device can't access what is on the card.
if you want to keep the ringtones while connected as USB, copy them to the internal memory of your device.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

To remove encryption from the files in the memory card

Hello,
Yesterda I checked the opcion of encryption on my BB. Today I had problems when synchronizing the data between the PC and the BB, all my data was deleted from the phone (not from the memory card) and I now I have deactivated the encryption check on the BB settings.
The problem is that when I start my BB the BB asks me for the encryption key which was used to encrypt the data in the memory card, and therefore I want to get removed from the need of this encryption key, therefore I need to desencrypt all the files from the memory card.
how can I do this?
Thanks in advance,
Monica

You can drag them out of dock, at least 2 inches or so up and then hold until there is a puff of smoke - they'll be gone.

How do I set my camera to save all pictures to my phone and not the memory card?

Since I've added a 4G memory card my camera has a very long delay after each picture. I noticed if i switch it to save to the phone there is no delay. Is there any way of fixing this or do I have to switch it every time i use the camera?
Post relates to: Centro (Sprint)

If there is an SD card in the device it is always going to switch over to the SD card to preserve memory on the device. The only way you are going to get it to default to the device and stay on the device is not have the SD card in the device, possibly a third party application that allows to render this functionality but nothing I know of off the top of my head.
Post relates to: Centro (Sprint)

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

My iphoto on my MacBook Pro will not let me import my photos from my canon t3i. It is blurred over both import all, and import selected showing that I cant choose those options. I've tried with the memory card and usb cord. Please help!

What version of iPhoto?
Can you access the images with Image Capture (in your Applications Folder) ?

Mera, (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view. This also erased the pictures from the memory card. Help?

I tried to download my pictures with my memory card from my camera (this has always been sucessful) however the pictures would not download, and appear to be encrypted and unable to view, also not saved in my 'Iphotos' This also erased the pictures from the memory card. Help.....anyway of retrieving them?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
did you get a message when trying to import from the memory card?
did you use a card reader?
what was you exact workflow for attempting the import?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library? See image below:
what type of Mac?
how much free space on your boot drive?
OT

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

MacBook Pro (Retina, 15-inch, Mid 2014) will not read an SD card in the SDXC card reader. Does anyone know whats going on?

Hi David. I don't have as modern a Macbook Pro as you, mine is a 2012 model, but perhaps I can help. I often find that my SD card will not load when I first insert it. I have to remove it and then put it into the slot again firmly.
You also haven't posted any information about the SD card. What size is it, do you know how it is formatted, has it worked in that same mac previously, where did it come from, does it currently work in another device (such as your camera)? This sort of information will help to narrow down the problem.
If you post some more information I'm sure people will try to help you. In the meantime, if you look at your post again you should see "More Like This" at the bottom of the page and you may find an answer in some of those related posts.
Hope that helps.
Ivan

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

BB Curve 9220 not reading the memory card

Similar Messages

Maybe you are looking for