BB Desktop Manager 4.7 has encountered a problem and needs to close.

When I restart my computer, some of the icons in the notification area are missing. The I get the standard "BB Desktop Manager 4.7 has encountered a problem and needs to close" error and my XP machine wants to send an error report to MS.

Please try the following steps:
-Delete the Intellisync folder.
     Close the desktop manager application.
     Disconnect the BB from the computer.
     Double Click on My Computer> Local Disk (C Drive>Documents and   Settings>(username)>Application Data>Research In Motion>
   Blackberry>Intellisync.
     Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
     Click the View Tab, then click on Show Hidden Files and Folders.
     Click Apply>Ok and continue through the remaining steps.
     Delete everything within the Intellisync folder.
     Launch desktop manager and attempt sync the device with the computer.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

Similar Messages

Lotus Notes 8 + BB DM 5.0.1: BB Desktop Manager has encountered a problem and needs to close.

I just purchased a Bold 9700 and am trying to sync my Lotus Notes 8 calendar to my BB. I am using Desktop Manager 5.0.1. I appear to have set up the syncronization properly because it starts but when it reaches record 1057, I receive a message that reads "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." When I click on "details" I see the following information: Error Signature. AppName: Desktopmgr.exe   AppVer: 5.0.1.37   ModName: Insections.dll   ModVer: 7.1.1.129 Offset: 001a32ed. How can I successfully sync my calendar and BB?

laureng wrote:
I just purchased a Bold 9700 and am trying to sync my Lotus Notes 8 calendar to my BB. I am using Desktop Manager 5.0.1. I appear to have set up the syncronization properly because it starts but when it reaches record 1057, I receive a message that reads "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." When I click on "details" I see the following information: Error Signature. AppName: Desktopmgr.exe   AppVer: 5.0.1.37   ModName: Insections.dll   ModVer: 7.1.1.129 Offset: 001a32ed. How can I successfully sync my calendar and BB?
Hi and Welcome to the Forums!
Here is an article that may be pertinent:
KB10340 "BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience." during the synchronization process
Otherwise, I would think that record 1057 is a bad record and is causing this problem. You might try figuring out which item that is and deleting it, then trying again.
You also could try activating advanced logging and seeing it that provides more details to help you:
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Blackberry Desktop Software has encountered a problem and needs to close

When I try to open Blackberry Desktop the message I get is that Blackberry Desktop Software has encountered a problem and needs to close. I have a Blackberry Bold 9700 and as a result I cannot sync. Does this mean I need to uninstall and reinstall? If I reinstall will I lose the update that I have on my phone that has changed the interface? Will I have to reinstall that as well?
Thanks for any help or advice you can give me.

I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

Hello,
Any idea how to fix this problem that casuses this error?
'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day. This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
'' Problem sending commands to the program"
Thank you
Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
Yesterday I started having this error message pop up when I first boot up my computer. I haven’t even started LabVIEW.
Recent changes:
6Jan08 Replaced motherboard and CPU.
6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition). Computer working fine.
8Jan08 Installed LabVIEW 8.0 Student Edition. LV is working fine and the message does not appear.
9Jan08 Download and install NiDAQ 8.6.1. Reboot the system and the above error shows up. LabVIEW works fine so far.
Anybody have any ideas on what the problem is? I have a screen shot of the actual message, but I can't load it on this page.
Oliver
[email protected]

Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

Remote Desktop Connection has encountered a problem and needs to close. We are sorry for the inconvenience.

Hiya,
What O/S versions(RDP) are you connecting to and from? Try and open the target machines event log and see what it throws when you try to connect.

Help! Blackberry Desktop Software has encountered a problem and needs to close

I cannot get my Blackberry Desktop to open. An immediate message is displayed" Blackberry Desktop Software has encountered a problem and needs to close." I have done the following:
1. Rebooted
2. Uninstalled and reinstalled from the website
3, Uninstalled, gone in to the program files and removed everything I cou;ld find from Research in Motion and then reinstalled from the website and rebooted
Nothing has worked. My Blackberry Bold 9700 phone is still working just fine but I cannot back it up/
I am not the most technilogically savvy but I'm not bad...Someone please help!.

I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Also, for XP users, please be sure you are on SP3...that is the current minimum level required with the latest Desktop Software.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Desktop Software has encountered a problem and needs to close

I installed BB Desktop V 6.1 (610_b034_multilanguage) on my laptop that runs Windows XP. Installation completes. When I attempt to open the program, it gives me "BB Desktop software has encountered a problem and needs to close." I've tried uninstalling and reinstalling. I've rebooted. I've closed all other programs before install and before running the program.
Thoughts on how to fix?
Thanks,
Randy

I'm having the same problem after upgrade from 5.1 to 6.0. AMy Blackberry Bold 9700, just bought this morning. Appreciate any assistance. Thanks

Cisco agent desktop has encountered a problem and needs to close error

A Remote Hotline user is experiencing crashes with her desktop agent. After logging into the program it generated the error message "The Cisco Agent Desktop has encountered a problem and needs to close"
I have removed the agent from add remove programs, re installed it and attempted to run it logged in as an admin and using both mine and the user's agent credentials and the program still crashes.
Agent desktop ver 5.0 Build 6.4.2.12 Windows XP
Any ideas?
Regardes, Chet

Thanks for the reply, this is what I did to resolve it:
Fix:
Uninstalled Desktop agent from add remove programs
Re installed program
Do a complete restart or the prog will continue to crash
Test program by logging in with user’s credentials

BlackBerry Media Sync has encountered a problem and needs to close

I have been trying to sync my BB Curve with Media Sync and am continually receiving the same error message, "BlackBerry® Media Sync has encountered a problem and needs to close. We are sorry for the inconvenience."
I have tried restarting the computer, insalling and reinstalling, MediaSync, Desktop Manager and iTunes. All these actions seem to be ineffectivei n syncing music to my Curve via Media Sync and I keep receiving the same error message. I am able to manually move music from iTunes onto my Memory Card in the E: Drive. Any assistance in troubleshooting Media Sync would be greatly appreciated. Thanks
System Specs:
BlackBerry Media Sync 2.0.0.27
BlackBerry Desktop Software 5.0
BlackBerry Curve 8310 (v4.5.0.110)
-8 GB Kingston MicroSDHC
iTunes 8.2.1.6
Windows XP SP2
Solved!
Go to Solution.

Hi and welcome to the forums!
BlackBerry Media Sync 2.0 terminates unexpectedly
The Microsoft® .NET framework used by the BlackBerry Media Sync product is not installed properly or has become corrupted.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Handheld Application Loader Wizard has encountered a problem and needs to close. We are sorry for the inconvenience.

I keep getting this message when i connect my new Bold 9900 and started getting it on my curve 8330 a couple months ago. I have the newest version of desktop manager 6.0 installed on both my laptop and my PC. The strange thing is it works flawlessly on my laptop, no error messages from either phone. Just got the new Bold last week, plugged it in to PC, same error. I have done alot of reading through the forums and have tried to uninstall and re-install the desktop software 3 or 4 times. Even tried upgrading the OS on the Curve and Bold on the Laptop. Plugged it back into the PC and same problem. I cannot force the Loader.exe to start on PC when I click on it on the C:\program Files/Common Files/Research in Motion/Apploader, crashes right away. Even tired a method that outlines how delete registry entries, etc and tried that. Does anyone have any further ideas or more detailed way to resolve this. Seems to be desktop manager issue as no problems with same devices on laptop.
Solved!
Go to Solution.

Re: Handheld Application Loader Wizard has encountered a problem and needs to close. We are sorry for the inconvenience.
Sorry I will correct the laptop order:
Okay, on my desktop USB controllers:
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
VIA REV 5 or later USB Universal Host Controller
VIA REV 5 or later USB Universal Host Controller
VIA REV 5 or later USB Universal Host Controller
VIA USB Enhanced Host Contoller
On my laptop:
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27C8
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27C9
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27CA
Intel(R) 82801G (ICH7 Family) USB Univeral Host Controller - 27CB
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub

'Handheld Application Loader Wizard has encountered a problem and needs to close'

Message Edited by charlieh1 on 05-07-2009 07:56 PM
Message Edited by charlieh1 on 05-07-2009 07:57 PM

I just received my new BB Curve 8900 on o2 UK, and after installing the latest version of Blackberry Desktop Manager and connecting my phone the following error message comes up
'Handheld Application Loader Wizard has encountered a problem and needs to close'
followed by the message
'A fatal error has occured whilst updating your devices software. Please try again.'
I'm pretty new to Blackberry and tried reinstalling the software but the message continues to come up.
Any help would be greatly appreciated.
Thanks
Charlie

Adobe Photoshop Lightroom has encountered a problem and needs to close. (ver 1.4.1)

I completed a search for this problem here and other forums, and found very useful information, however, I still need help. My laptop is an HP Pavillion dv1000, Intel Centrino, Windows XP, 1.24G of RAM; Camera is a Canon 5D, shooting JPEG only.
After a couple of weeks enjoying a vacation in the Caribbean, it was time to load all the new pics in the computer. I removed the card from my camera and using windows explorer, downloaded all pics in MyPictures folder. I created a new folder for this trip, and while I was there, I decided to reorganize several folders from previous trips. I renamed and moved folders around, deleted pictures, etc. (I believe that all the changes that I made created my problem.)
Once I finished all the changes with my folders, I launched Lightroom (ver 1.4.1) with the idea of synchronizing the folders and start working on my new pictures. After apx 8 seconds, I got the message: Adobe Photoshop Lightroom has encountered a problem and needs to close. We are sorry for the inconvenience.
After a google search, I found a lot of potential answers to my problem, including this one, which I tried:
"It might also be worth trying a temporary test catalog, just to see whether it's specific to that catalog. To do so, go to File menu > New Catalog and create a new catalog somewhere easy - Desktop perhaps - and just try importing a few photos into that test catalog and see if you can get it to freeze. I'm wondering if the catalog's been damaged slightly by that initial unexpected close, and if so, we'll see if we can get that sorted out for you."
I did exactly that (created a test catalog) and I don't get the error. I am not clear on what does that mean. Could you help me understand it? What do I need to do to use my old catalog? Is it damaged? How can I fix it? Did I loose all the work that I did in my previous pictures?
If I go back to my original catalog, I still get the error.
Thank you in advanced for your assistance.
Tony

Tony,
Here's something you might try:
Create a new, empty catalogue and try File->Import from catalog... and specify your broken one as input. With luck the damage will be left behind.
If that doesn't work, try deleting or renaming your preferences file. Look here for its location.
And if that doesn't work, try deleting or renaming your presets folder. See that same website for details.
Let us know how you make out.
Hal

Adobe Audition has encountered a problem and needs to close.

I have been using Audition 2.0 on this computer for quite some time and suddenly now when I open it, I get the cryptic error dialogue:
"Adobe Audition has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. For more information about this error, click here."
When I click for more information, it's something useless like:
AppName: audition.exe AppVer: 2.0.5306.2 ModName: unknown
ModVer: 0.0.0.0 Offset: 65726168
Nothing on my computer has changed. There are no viruses. I have not added any new audio plug-ins. I am completely up to date with all critical Windows XP SP3 updates and none have been downloaded and installed recently anyway.
I searched the knowledgebase and found a document that suggesting many things to try. I tried them all, including running the Windows hard disk "check disk" tool with options to fix file system errors and recover bad sectors. I also defragmented the hard drive. Lastly, I completely uninstalled Audition, then manually deleted any remaining files, including registry entries as suggested in another knowledgebase article.
I then re-installed Audition 2.0 and it did exactly the same thing! This it maddening. Now it gets even more interesting. I discovered that if I start up the
Adobe ExtendScript Toolkit that Adobe Audition installed also, then try to launch Audition from the toolkit, IT STARTS CORRECTLY! I can then close the toolkit and use it like normal. Weird work-around.
What the heck could possibly be going on? Anyone have any ideas? I've attached the error log file that is generated by the error but I doubt it will be of much help.
Thanks!
Steve in Chicago

stevefoobar2: I may have found a solution for you.
I had the same thing happen to me today. I was using Audition 2 this morning without any problems. But this afternoon, it started giving me the exact same error with no apparent reason. Nothing on my system had changed.
So I uninstalled it and installed Audition 3 in its place. Audition 3 continued to have the same problem that Audition 2 had, so we can assume that this is not something that was changed between versions.
But my attention was brought to the fact that you and I are both running Windows XP SP3 fully up-to-date. So I thought I'd try seeing it from the angle of a problem with Windows instead of Audition, and see if I didn't get a better result -
First, I logged on to Windows as Administrator. This may or may not be required, but you'll probably want to do it just in case (you'll see what I mean later). At this point, Audition still crashed the same way when I opened it, so I moved on to my next troubleshooting strategy -
Instead of opening Audition directly, I right-clicked the Audition icon and selected "Run as..." This may seem odd since I was already logged in as Administrator, but it proved to be the solution in my case.
In the "Run As" diolog, there are two main options: run as current user, or run as another user.
Since I was already logged in as Administrator, I could safely select the first option (run as current user). But here's the catch: selecting the first option allowed me to UNcheck the box underneath that says "Protect my computer and data from unauthorized program activity" (see the attached picture)
Audition opened without any problems when I did this.
This makes me think that one of the Windows security features suddenly decided to block something that Audition was trying to do, crashing the program in the process. By turning off this security feature, the problem was solved. And I only had to do it once. Every time afterwards, Audition has opened without any problems when I simply open it from my desktop. Perhaps Windows now remembers not to block Audition in the future.
However, I have not restarted my computer yet, or logged off as Administrator. You may need to tweak this solution if you plan to do either of these things. You may end up having to "Run as" Audition every time you restart your computer or log off. You may even need to select the SECOND option, and run the program as Administrator with the appropriate password.
Anyway, this was the only post I could find on Adobe.com concerning this problem, so I thought I'd post my solution in case it helped someone else.

Adobe Acrobat has encountered a problem and needs to close.

Just recently when I launch Acrobat X after about 10 seconds I get this error, "Adobe Acrobat has encountered a problem and needs to close. We are sorry for the inconvenience." I can create PDFs and open PDFs for 10 seconds. I've done a repair of Acrobat, I tried a new user account, and I disbled all my start up items. I still get the same error I have no clue what to do. Any suggestions?
J.R.

OK Will, I pressed ctrl + Shift and double clicked on a desktop icon of a file.pdf I had saved there and it opened and is still open. By not pressing ctrl + Shift the file opens then closes with that error in about10 seconds.
So now, what has that proved to us is the issue? Doesn't that load Acrobat without all the extensions?
This issue just started a few days ago and all I remember installing on my computer were some Window's updates.
J.R.

Adobe Flash CS5 has encountered a problem and needs to close

Hi,
I have two laptops. I have installed Adobe Flash CS5 in my first laptop (Windows XP). When I start the application, it shows the following message:
"Adobe Flash CS5 has encountered a problem and needs to close"
I have installed the Flash CS5 in my second laptop and it worked fine.
Error signature:
AppName: flash.exe AppVer: 11.0.0.485 ModName: updaternotifications.dll
ModVer: 1.0.0.64 Offset: 0006a8dc
Can anybody help?
Thanks.
Housea

try this also
1. Reset preferences:
To reset on Windows, delete:
C:\Documents and Settings\username\Local Settings\Application Data Adobe\Flash CS4\
C:\Windows\system32\Macromed\Flash\FlashAuthor.cfg
To reset on Mac OS X, delete:
/Users/username/Library/Preferences/Flash CS4 Preferences
/Users/username/Library/Preferences/Flash 10 MRU
/Users/username/Library/Preferences/com.adobe.flsh-10.0.plist
/User/%username%/Library/Application Support/Adobe/Flash CS4/
/Library/Application Support/Macromedia/FlashAuthor.cfg
2. Install the latest Flash update if available.
3. Install the latest version of Flash.
4. Install current Windows service packs and other updates.
5. Run Flash in a simplified mode (Windows). / Run Flash in safe mode (MAC OS - Refer to http://kb2.adobe.com/cps/404/kb404936.html)
Some applications or services may cause system errors or freezes when running concurrently with Flash. Services are specialized programs that perform functions to support other programs. Before starting Flash, disable other applications, including startup items (items that start automatically), and services.
To disable startup items and services, see "Disable startup items and services (Windows XP)" (TechNote kb404984).
To re-enable startup items and services:
1. Choose Start > Run, type msconfig, and click OK.
2. Choose Normal Startup on the General tab, click OK, and restart the computer.
Note: If unselected items were present on the Services or Startup tab, then you will need to unselect them again
6. Install Flash from the desktop.
7. Reinstall Flash in a simplified/safe (for MAC OS) mode.
8. Run Flash in a new user account.
9. Check for font problems.
10. Optimize handling of temporary files by Windows XP.
11. Set the virtual memory paging file to the default size.
12. Repair and defragment hard disks.
13. Scan the system for viruses.
14. Identify the file that causes the problem.
15. Install Adobe Flash CS4 on a different computer.

BB Desktop Manager 4.7 has encountered a problem and needs to close.

Similar Messages

Maybe you are looking for