BB does sync media with PC but not with Mac

my BB does sync media with PC but not with Mac. At my Mac I got 'Insert media card'. How can this be solved as PC is no problem?

I got the Bold 9790. I am not sure which OS, does that matter? Are there OS versions not compatible?

Similar Messages

Photos uploaded through icloud control panel are only synced with iphone but not with ipad

Photos which are uploaded through icloud control panel are only synced with iPhone but not with iPad. Photos taken with iPhone or iPad are synced with all devices. So, why I do not get the uploaded photos from my pc to iPad? I alredy disabled photo stream on all devices - same failure

If only one device is not getting updated data, you need to troubleshoot that device and not photostream itself.
Verify that ipad is connected to wifi, charged over 20 percent, camera app is closed and take a photo of the screen (or anything else, but then close that camera app).
Open photostream folder on that ipad and see if picture shows up. If you network is good, should not take long.
Don't forget that while your phone can use wifi and cellular (even it suppose to use wifi for photostream, cellular networks got much better since original photostream was implemented) - you ipad is probably wifi only.
If picture shows up - you ipad and photostream have no problems and you can go to other devices one by one.

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

Can manually subscribe with Windows but not with Mac

For some reason I am able to manually subscribe to the below feed just fine with iTunes on my PC (Windows XP) but I get an error when trying with my iMac (OS X 10.5.8):
*http://feeds.feedburner.com/Metalspeak*
The error I'm getting with my iMac references "An unknown error occured (400)"
I was troubleshooting a different feed and am getting similar results: it works fine with the PC, but not with the iMac:
*http://feeds.feedburner.com/MetalsPeakPodcast*
The error I'm getting on this feed however states "The file might be corrupted, or a file type that iTunes cannot play"
Can anyone think of why these feeds work with Windows but not with Mac? Any advice is appreciated!

The problem lies with the URLs for your media files. The one for the top episode is
http://www.metalspeak.com/episodes/MetalsPeak 10 - GenresPeak.mp3
This URL contains spaces, which are not allowed in a URL. Browsers - and from what you say iTunes in Windows - handles this by substituting the code %20 for each space when requesting the file; iTunes for Mac does not.
You need either to change the filename for each media file, removing the spaces or substituting something such as an underscore, and then amending the feed accordingly: or at the least to amend the feed by replacing each space with %20.
It's the same problem in the other feed.

I get sound from Youtube with Safari but not with Firefox

I get sound when using my MacPro with Safari but not with Firefox.

Did you check the volume setting in the player to make sure that the sound isn't muted?
You can try to clear the Flash local storage.
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

Setting margins works with ExportToDisk, but not with ExportToStream...

I'm filling out a report with SetParameterValue, and not with database, and setting the margins with:
templateCredencial.ReportDefinition.Sections["DetailSection1"].ReportObjects[elementNumber].Top;
templateCredencial.ReportDefinition.Sections["DetailSection1"].ReportObjects[elementNumber].Left;
After that when i call ExportToDisk to write as pdf, the margins that i setted are there, but when i use ExportToStream like that:
MemoryStream stream = (MemoryStream)credentialTemplate.ExportToStream(ExportFormatType.PortableDocFormat)
And call stream.ToArray() as return in FileResult, the pdf that shows up on browser is without the margins that i setted. Does anyone have idea how can i return the pdf to the browser with correct margins without get file from disk, using only the stream?

I don't know because you did not say what the results were or answer any other questions I asked.
I said what the results were in first post:
And call stream.ToArray() as return in FileResult, the pdf that shows up on browser is without the margins that i setted. Does anyone have idea how can i return the pdf to the browser with correct margins without get file from disk, using only the stream?
And, where are you other questions? Sorry, i didn't see it.
Why can't you simply export to Disk and then stream that file?
I need performance, and if i need to write a pdf with 10mb, and after read it, and next return (with asp.net mvc 3) to browser like a FileResult, i 'll lose performance.
What is the right way to change the margins and return it like a byte array without losing the margins that i setted?

Typekit works with Dreamweaver but not with Muse?

Why is it that I can use all Typekit's fonts together with Dreamweaver and not with Muse?
The fonts currently available via the TypeKit font menu in Muse (3.1) are of very low quality. 98% of them are "display type fonts" at best in my humble opinion. I need high quality fonts when designing high quality projects for my customers.
If I want to use Minion Pro or Futura in my Muse projects — are there any workarounds that does not get lost when I update the site with Muse? For example via the "HTML for <head>" field via the Page Properties dialog window in combination with some other Muse features?
Does the Adobe Muse Team (or someone else) have a step-by-step guide how to accomplish this?
Thanks a lot!
Kudos to The Adobe Muse Team – Muse is a fantastic piece of software. Easy to work with and really fun to use. Looking forward to the next update!

This is strange, but hopefully good.
I searched for Typekit, fonts and Muse etc on the forums before posting and did not get any relevant hits. But now I think I've found the workaround in the column to the right of this very post under the headline "More Like This".
http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html

8.5 Report works with OCX but not with CRAXDRT

Post Author: kjwatson
CA Forum: Older Products
I have an application using Crystal Reports 8.5. It uses the crystal reports OCX to view and print reports.I added the CRAXDRT to the application so I could export PDF files. It works fine except that Running Total Fields and Formula Fields to not seem to evaluate correctly. Formula Fields only work if they reference a Database Field. If they reference a Running Total Field, they do not evaluate. I'm initializing the connection of the tables on the report and sub-reports. Could I be missing something else? The reports work fine with the older OCX, but not with the CRAXDRT. Any help/ideas are appreciated!Thanks,Kevin

Post Author: kjwatson
CA Forum: Older Products
I have an application using Crystal Reports 8.5. It uses the crystal reports OCX to view and print reports.I added the CRAXDRT to the application so I could export PDF files. It works fine except that Running Total Fields and Formula Fields to not seem to evaluate correctly. Formula Fields only work if they reference a Database Field. If they reference a Running Total Field, they do not evaluate. I'm initializing the connection of the tables on the report and sub-reports. Could I be missing something else? The reports work fine with the older OCX, but not with the CRAXDRT. Any help/ideas are appreciated!Thanks,Kevin

Problem Encoding WMV to FLV with Media Encoder CS4 (but not with CS3)

Hello,
I have been attempting to encode some WMV files with Flash Media Encoder CS4 (I have Adobe Creative Suite CS4 installed) but it has failed, generating this error:
- Source File: C:\Documents and Settings\usf\Desktop\incoming\ch01.wmv
- Output File: C:\Documents and Settings\usf\Desktop\incoming\ch01_3.flv
- Preset Used: Custom
- Video: 624x343, Same as source [fps]
- Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
- Bitrate: VBR, 400.00 [kbps]
- Encoding Time: 00:06:36
5/28/2010 11:26:16 AM : Encoding Failed
Error compiling movie.
Unknown error.
On another computer where Adobe Media Encoder CS3 is installed (with Creative Suite CS3), I experience no such problem. I do notice that when I add the WMV to Adobe Media Encoder CS3, it opens a window that prompts me to use "ffdshow", which will apparently work if it's configured to decode the file. I click "OK" and start the queue in the encoder. A few minutes later I get a successfully encoded FLV file.
I have come to question whether Adobe Media Encoder CS4 should be re-installed, whether the entire Suite should re-installed, or if there is some patch or fix I can install somewhere. Adobe Media Encoder CS4 is installed on my "production" computer which also has Adobe Premiere Pro (CS3) and Adobe Premiere Elements (7).
Could use some advice here.
Glen
P.S. the files will also not export to FLV using Adobe Premiere or Premiere elements...

Again, the reason we are capturing with Windows Media Encoder is because we tried using Live Flash Encoder to capture directly into flash but our equipment wasn't fast enough and it was dropping frames all over the place. We also don't have the space to capture into an uncompressed format because we don't have the available storage, and our events can be 8 hours long or more (each video is about 15 minutes, 20 or more videos)
Ive listened to everything in my workflow and it sounds fine until the outputted FLV file from AME.
WME is capturing at the following specs:
160kbps 48KHz Windows Media Audio 9.2 codec (stereo) 1 pass CBR
1800kbps 1 pass CBR video
29.97 fps
640x360 resolution
buffer size: 5 seconds
key frame interval: 8 seconds
I have verified this with a codec info utility I ran on the wmv files.
AME is encoding with the following specs:
FLV Multiplexing
On2 VP6 codec
620x360 resolution
800kbps 2 pass VBR
100% undershoot at best quality
160kbps stereo MP3 audio
I verified the above with the same codec info utility (gspot 2.70a) and it is all acurate, it also told me that the audio is at 44.1KHz rather than 48 (there was no place to specify this, is this a limitatino of the VP6 codec?)
Yes, these are our source assets. They're being captured either through an XL2 via firewire, or from an analog program feed converted to firewire via a Canopus converter box.
If anyone has any suggestions on how to get rid of this, or a different encoder (either to capture with rather low cpu resources, or to encode into flash) let me know. I can provide a sample of the clipping if you need
Thanks,
Peter

New shuffle works with Windows but not with Mac

Just got a new 2nd gen shuffle. Initially it was formatted as Fat32 per Disk Utility on Mac. I reformatted to Mac OS (journaled). iTunes was recognizing the new shuffle on the mac and I created a playlist that showed it took up disk space in the "summary" tab. However nothing played on the shuffle when I disconnected it. I was trying to update the software but that function is greyed out. I tried to click "enable disc use" and when I applied it, it says it can't find the ipod. It wont let me update anything. The only thing I can do is create a playlist that the summary says is on the ipod but it doesnt play.
I then connected it to my Windows XP machine and it asked me to reformat the drive, which I did, then everything worked flawlessly. I would really prefer to download things to the shuffle from my Mac than Windows XP but it just won't let me. I tried using "iPod Updater" and the most recent one from the list was 03/2006 and that didn't help anyhting. "iPod Reset Utility" would not recognize the ipod to reset it even after I sucessfully set it to Mac OS journaled in Disk Utility.
I am very frustrated. This also happened to my Nano I purchased a few months ago and I have to organize it on the PC as well.
I am running iTunes 7.2

I have exactly the same problem with my two
computers, both of which are Macs. The shuffle is
recognised on one, but not the other.
Here's a screenshot of iTunes ->
http://www.simongbrown.com/blog/images/2007/shuffle-no
t-recognised.png
BTW, I also have an older white iPod in use on the
Mac that doesn't work.
I've tried a few things (including running iTunes
under a different user account, reinstalling iTunes)
but nothing seems to help. The only thing left to do
is reinstall the OS, but that sounds a little extreme!
That's way too extreme... Use the shuffle Reset Utility.
http://www.apple.com/support/downloads/ipodresetutility10formac.html

Airtunes works with music but not with tv show

I have an AE wired to my to my A/V receiver and I play itunes music wirelessly thru the AE and it works fine. Problem: I downloaded a TV show and the audio will not stream via the AE and will only play thru the computer. The video works fine fine in both cases as I have it hooked to my TV via my A/V receiver from my Macbook display port. I am running itunes 8.1 and my AE is on firmware version 7.4.1.
Anyone know why the songs audio works and the tv show audio does not?

Thanks for that fast and definitely a fix at this time. It also works with internet radio, not just the iTunes radio stations. Now my wife will be able to listen to KFOG from San Francisco and I can actually hear my movies, since I am using a MacBook and it is just not loud enough.
Thanks Again Andy.
I love these forums.

Ftp access works with Safari but not with Netscape or Explorer

The problem I am trying to solve is that my ftp service works correctly with Safari but gives an error message when the ftp service is access via Netscape or Explorer. Error message is "530 Guest login disabled". These two web browsers will not display a login screen for access by real users; Safari provides the login screen. The server is restricted to real users only
G5 XServe Mac OS X (10.4.7)
G5 XServe Mac OS X (10.4.7)

ITEN-
Check the proxy settings of the programs that are not working.
Check your firewall settings as well but I do not think that is it.
Luck-
-DaddyPaycheck

XPath query works with CLOB but not with object relational

hi all
i have the following queries,the XQuery work with all, but XPath queries work with XMLType CLOB and Binary XML, but they do not work with XMLType as Object relational,
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "L.Cohen"]/films/film[position()=2]/t')
from xorm;
they shows this message
ORA-00932: inconsistent datatypes: expectd SYSTEM.name683_COLL got CHAR
thanks

Hi Marco
fisrt here is my RO
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL=>'http://......../ORMovies.xsd',
SCHEMADOC=>bfilename('DB','Movies.xsd'),
LOCAL =>false,
GENTYPES=>true,
GENTABLES=>FALSE,
CSID=>nls_charset_id('AL32UTF8'));
END;
create table XORM of xmltype
xmltype store as object relational
XMLSCHEMA "http://......../ORMovies.xsd"
ELEMENT "movies";
INSERT INTO XORM
VALUES(XMLType(BFILENAME('DB','ORMovies.xml'),nls_charset_id('AL32UTF8')));
here the XQuery format that work fine with the OR
A/D
select XMLQuery ('for $a in movies/directorfilms/films/film
          where $a/studios/studio = "Gaumont"
          return $a'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
child element query
select XMLQuery ('for $a in movies/directorfilms/director[dirname = "Feyder"]
          let $b:=$a/../films/film[position()=2]
          return $b/t'
     passing object_value
     returning CONTENT)"TitleX"
from xorm;
here is the XPath format which doesn't work
select extract (object_value,'movies/directorfilms/films/film [studios/studio = "Gaumont"]')
from xorm;
select extract (object_value,'movies/directorfilms[director/dirname = "Feyder"]/films/film[position()=2]/t')
from xorm;
by the way all queries work fine with the CLOB or Binary XML
many thanx Marco

Airport Express works with Skype but not with internet

Hi,
I recently bought some new Airport Express' for my company. However, when plugging it in we seemingly get full access, but only Skype seems to work. If I do a search on the internet it can sometimes look like it find the address after a long while, but don't manage to open the page. E.g. writing www.google.com in the search field doesn't give access to that page.
I brought them home to check if the Airports worked there, and they did. No problem. But at the office the Airports don't. If I connect the same plug which is connected to the Airport into the MAC / PC, then I have full connection to the internet.
What to do?

After Grant pointed out the DNS thing, I started to check that part, and I noticed something funny. I called Apple Support regarding the problem, and now it's solved
Here is my experience:
1. My Airports worked fine when home, but not at work.
2. Checking the LAN DNS addresses I received three addresses. 2 in the 158.xx... range and one in the 129.xxx... range.
3. The Airport Extreme and Airport Express does only support two DNS addresses, and since the two 158.xx... DNS addresses came first in that range the 129.xxx... was left out.
4. I manually changed one of the 158.xx... addresses to the 129.xxx... address I got on my MAC / PC when I connected directly to the wall and did a "ipconfig /all" on the PC. The three same addresses is listed under network - airport on the MAC.
5. Now suddenly it all worked. This due to that the two 158.xx... addresses seamed to be internal addresses, and the 129.xxx... address was from outside delivered from our operator.
Summarized:
When you receive 3 DNS addresses you MAC and PC can handle it fine, but your Airport not. Find all your DNS addresses and write them down. Enter Airport Admin Utility and do a manual setup. Change one of the two equal address to the third address. Most probably listed as the last DNS address when you are connected directly and type e.g. "ipconfig /all" on your PC or you enter the network settings.
Best regards,
Bouw

Flash player lags bad with Firefox but not with google chrome,what is the problem ?

Every time i try to play any game using flash player with Firefox i have a lot of lag time. I have to stop playing and wait for things to catch up to play to play any more,I do not have this problem with google chrome playing the same games.I have updated all add ons and plugins.
== This happened ==
Every time Firefox opened
== about a month ago

Everyone can blame flash player if they want, but the truth is for me I went from an earlier version that had plugin container which created lag for me. I disabled the plugin container in about:config settings, and firefox worked fine. Plugin container screwed up any videos i tried to watch on the internet by freezing, lagging, and crashing firefox. I was fine after I disabled plugin container, but then eventually some time later down the road I received a warning that i would soon be forced to update my mozilla so I eventually/reluctantly gave in and complied. At this point the same problems started again!!! I disabled plugin container again and it did help a bit right away. But this version 12.0 even with plugin container disabled with just a few tabs open I receive choppy video (like a snapshot of the video at 3 seconds in, and then another snap at 6 seconds in) I'm only seeing snapshots of the video like every 3 seconds while the audio continues on fine. That"s how bad the lag is. This is horrible performance for a browser. If I try to load a video while one is already playing, just that little bit of stress (2 youtube videos open at once) is all it takes to crash this poor performing version of firefox. I mean I can't even close the tabs after these situations and the audio sometime runs after closing for me as well. These problems did not start until the version changes of firefox and the addition of plugin container, not flash player. I have been a loyal mozilla fan, but my patients is wearing so so thin with the performance of this browser at the moment. Unfortunately I just realized for the first time ever I actually have to (against my will) install another browser just to watch videos. How sad is that? Considering watching videos is one of the main uses of a browser, I consider this version a failure. How could I not??? I guess I have no choice but to Chrome it up. I hope a fix for this problem can be found soon for I miss the great performing days of this previously top performing browser. Fingers Crossed!!!

BB does sync media with PC but not with Mac

Similar Messages

Maybe you are looking for