BB Help. White Screen, can't update.

Hiya
Got the white screen of death about a month ago, 2 days after my warrenty had run out.
Managed to update the device with older software and it all worked fine.
But the other night I got a BBM Message, and when i went to look at it the screen was monstly all white except for a few pixels where i could see the background of my phone.
Tried to update my device and it wouldn't let me, it can't connect to the device and it just has a white screen on my BB.
Any tips? or should I take it to the O2 shop and see what they can do?
Cheers.

ok guys I managed to access the Macintosh HD using target mode via my MBP. is there any way I can replace or fix any files to make it boot again ?
please some help here
I have alot of work to do left on me.
thank you

Similar Messages

  • My ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??

    my ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??please help me

    That symptom is covered here.  However, you may have a hardware problem caused by the drop. and an appointment at the Genius Bar of an Apple store may be in order.
    iPod touch: Hardware troubleshooting

  • I am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

    i am using itunes version 9.its not updating..Pls help as how can i update my itunes to the latest version??????

    See this for Windows... http://support.apple.com/kb/TS1538
    and this for Mac OS X... http://support.apple.com/kb/TS1591

  • Guys help me that can i update my iphone 4s ios 5.0 to 5.1?

    guys help me that can i update my iphone 4s ios 5.0 to 5.1?

    Still very confusing... do you want to know HOW to update? If so, iOS 5.1 is no longer available, you can only download the latest 5.1.1. To do so, go to Settings > General > Software Update > Download and Install.

  • HT1338 PLEASE HELP ME I CAN'T UPDATE OS X 10.8.3.  THE UPDATE SAYS INSTALLED BUT KEEPS PROMPTING ME TO INSTALL IT.  WHAT CAN I DO?

    PLEASE HELP ME I CAN'T UPDATE OS X 10.8.3.  THE UPDATE SAYS INSTALLED BUT KEEPS PROMPTING ME TO INSTALL IT.  WHAT CAN I DO?

    Welcome to Apple Support Communities
    Sometimes the Mac App Store version gives problems. If you can't install OS X 10.8.3 from the Mac App Store, install the Combo edition > http://support.apple.com/kb/dl1640

  • Help please - I can't update my ipad software as always get network connections issues - have turned off security!!

    help please - I can't update my ipad software as always get network connections issues - have turned off security!!

    I would try updating through a computer. Just make sure that your computer has the latest itunes

  • I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

    I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

    It's a problem that Apple is having with their App updating system.  The best solution is to be patient, and wait for Apple to solve their systemic problem.

  • The infamous white screen - can you help?

    A friend edited a video with Final Cut Pro and then exported to Quicktime format so that I could watch it on my laptop. But when I play it in Quicktime, I can hear the sound but only see a white screen. When I double click the file, Quicktime opens and up pops a message:
    "Some necessary Quicktime software is missing. etc etc"
    But once I am taken to the Apple site, I have no idea which of those codecs I need to download.
    If it helps, the clip I'm trying to watch is 1920x1080 and under 'codecs', the following are listed - HDV 1080i50, Integer (Little Endian), Timecode.
    Any advice as to how I can watch this clip in Quicktime?
    Powerbook G4 12"   Mac OS X (10.4.6)   Quicktime 7.1.6

    The FCP export used video codecs not supported outside that app. Meant for one FCP user to another.
    They should export using H.264 Video codec so any version 7 user could view the file in QuickTime.

  • Every time I start up, it freezes on a white screen can anybody help me out?

    All of a sudden on Friday, my MacBook won't start up!  It just freezes at a white screen!

    Try the procedures in this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • White screen for apps update?

    My iPhone has a problem with the update of apps. It shows an update. If I want to install this, just a white screen. Does anyone have a solution to this? iPhone 4s with latest update.

    Hello there, Rev Susi.
    From what I can gather you have a few apps that only display "Waiting". The following is a past discussion that dealt with a similar issue, the answer may help you as well:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    via whatheck
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • White screen , can't access recovery disk or usb

    hello guys,
    so I have an iMac 27" mid 2011
    and yesterday I was watching something on youtube, and suddenly the screen was flickring and the screen went black. so I hold the power button to shut down the system. tried to restart it and a white screen come out after the grey apple logo and no log in screen come out
    so I tried to log in to the recovery disk and I tried the repair disk and permission. and after that same thing happen white screen after the apple logo.
    after that I tried to log to the recovery disk again. but now I can't access it now I have a blue screen with a vertical lines.
    so I installed the mountain lion osx from the store to put it in a usb to try booting from it. but same blue screen come out for me. and now I'm stuck and don't know what to do to try fixing this problem.
    also I tried all the fixes in apple store discussions site. tried to log with command + v , and I had these logs:
    this logs for the Macintosh HD
    https://www.dropbox.com/s/ytsvsgqmsdofm7w/IMG_5805.jpg
    and this one for the recovery- 10.8 disk :
    https://www.dropbox.com/s/pltyw5duptkhqq4/IMG_5807.jpg
    and this is the blue screen I get when I log to recovery mode:
    https://www.dropbox.com/s/o34oli2s7ziyhl9/IMG_5806.jpg
    also I tried the single user command and tried the fsck command to try and repaire the disk, but nothing happened should I use more commands ? please advice me to fix this problem I don't know what to do to fix this. and here in Saudi Arabia there is no apple stores to go to.
    thank you in advance.

    ok guys I managed to access the Macintosh HD using target mode via my MBP. is there any way I can replace or fix any files to make it boot again ?
    please some help here
    I have alot of work to do left on me.
    thank you

  • White screen problem after updating to 1.1 firmware

    My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
    Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

    Disconnect iPod and close iTunes.
    Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
    You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
    Remove 1.1 files from the folder so that only those to files are in there.
    Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
    Fujitsu Siemens Amilo M3438G   Windows XP  

  • Help white screen no dock, no screen. no desk top!!!!

    I have no screen, no dock, no desk top. nothing just a white screen. Can anyone help me restore  I don't know how to fix this problem
    Help please!!!!!

    Ok downloaed osx lion and icloud. now my mac starts up and goes to a white screen. no dock no desk top nothing. it's like a great big white cloud nothing else.  I have used the option f11 key to get system preferances to come up and everything checks out. If I pull up recent under system and click on iphoto I get a white screen, If I click on icloud I get a white screen. If I click on Icloud on apple support I get a screen with the sign in screen jumping around.  I'm so brain dead trying to figure this out. Please if you can help!! Much thanks!

  • Starz Play help - white screen

    I just downloaded my trial for Starz.  When I tried viewing a movie I only get a white screen with the sound.  Any suggestions?  Thanks!
    {post moved to its own topic and subject line updated}
    Message Edited by CharlotteS on 08-25-2008 01:48 PM

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • White screen only for updates

    I have an IPad2.  When I go to updates (there are four waiting) I get a white screen with nothing on it.  No icons, no wording, nothing.  All the other bits at the bottom of the screen work, i.e. 'featured,' 'top charts,' etc.  I've shut down my IPad completely and re-started it but that didn't work.  I got close to the router to be sure I had the strongest signal and that didn't work.  I tried using celluar data as well.
    Ideas?

    This is a problem that many users are experiencing now. Apple is working on a fix.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this, because you cant fix it. It is a workaround only.
    Apps can always be updated in iTunes and then synced to your iPad. That is always an option.

Maybe you are looking for