BB Identification reset for messenger
Every three months or so, my BBM seems to reset, or I suppose it would be more accurate to say it asks for authentication again.
After three months, I have long forgotten the passowrd I used at the time so I have no choice but to reset. Now comes the fun part.
I know my email and secret question so I get the online BB web form. I again answer the question and voila... The PAGE TIMES out. Helpfulops... Try doing this from a wifi hotspot??? WTF?
The last time this happened I swore I was. Going to complain but didn't.
Three months later still not fixed?
I only use ONE app that requires BB authentication... And it resets itself AND is broken??? ONE?
I'd be further ahead with MSN, Gmail messenger ... At least the online webform would not be broken 3 months later.
Hey N0tAmuZed,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Try accessing the password reset from a computer and see if goes through. Also which BlackBerry Curve are you currently using?
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!
Similar Messages
-
Specific Identification Cost for batch managed items (Follow-Up from P2P)
Specific Identification Cost method is used for serial and batch managed item. Using this method, the outbound cost of such items would be the original cost of specific goods, which can be determined according to the serial or batch number of that item.
Business One allows the user to receive batch managed items with a batch number that already exists in the DB. Its possible that the received quantity is added to on-hand quantity in the warehouse. In such case, the quantity on-hand of that batch and the received quantity may have different costs.
What should be the system behavior in such case:
1. Block receipts to the same batch with different costs.
2. Write the difference to a price difference account, as done in Standard Cost method.
3. Manage the batch cost with Moving Average method.
This thread is continuation from 'Specific Identification Cost for batch managed Items' <a href="http://p2p.sap.com/businessoneforum?type=join&login=1&uid=41FB661A76CED536C825C4E2B6FF4397&cid=91&go=z37225">discussion</a> in P2P SAP Business One Forum (Product Development Collaboration).
Previous discussion on P2P is summarized in the attached file.Hi Peter,
This is a very important functionality that you are describing here. For example, in the Steel industry, it could be extremely useful to cost by batch or serial number.
If you receive a batch that already exists in the system and if the costing method for the product is moving average, then teh cost of the batch should be calculated based on the moving average as well.
If the costing method is standard, then the cost should go in a variance account.
If the costing method is FIFO, then it is a getting trickier...
Regards,
Vincent -
Error : 'No object identification permitted for infotype 0582, subtype LTA'
Hi Experts,
While executing the program 'HINUINFO_UPDATE'
i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'.
After the approval for LTA claim is done in ESS i have executed the program 'HINUINFO_UPDATE' to update he infotypes 15 and 582. Infotype 15 is getting created but while creating the infotype 582 system gives the above error message.
In the detailed error log system gives the following message.
"You attempted to access a data record with the object identification 1. However, according to the Customizing settings, object identifications cannot be used for subtype LTA of infotype 0582".
Can anybody please assist me how to solve this problem. Helpful answers will be rewarded.
Thanks and Best Regards,
Sanoj.Hi ,
Did any one find solution for this ? Please reply how to fix this issue. -
Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.
I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
ThanksHi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Soft and hard reset for time machine doesn't seem to work does anyone have suggestions?
I have tried to use a soft reset according to the language on the apple site by using a pin to push the button for a second even up to a minute but it doesn't seem to work. Does anyone have any suggestions for either a hard or soft reset? I did get a new router Netgear wireless extreme thus I'm only using the time capsule portion instead of the wireless router.
Tell us what happens when you press in the reset.. you should feel the switch click.. but don't press too hard or you will break the plastic lever arm.
Connect the TC directly to the Mac by ethernet and open airport utility.
Can it find the TC.. if so you can do a factory reset from the utility instead. If it cannot find it.. try again with the reset.. you need to hold in reset for about 10-15 sec. The front led will begin to flash rapidly. Release it at that point. -
I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?
This may sound crazy, but download any free app. This often "shocks" the other apps into working.
-
I get the error message 4 to 6 times a day. Since I don't ever remember signing up for Messenger, I'm puzzled by the message. I can't find Messenger in my applications file (or anywhere else) so I can't delete or un-install the program.
At first it was just an annoyance, but not it's starting to get to me!
What should I do?
Help!Try first to Clear your cache from : Tools > Options > Advanced > Network, Clear Now button.
if the above is not helpful, [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles create a new profile] and check it again.
if you create the new profile see: [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_recovering-information-from-an-old-profile Recovering information from an old profile]
thank you -
OS: Windows Server 2008 R2 Enterprise
Domain Level: 2008
Forest Level: 2000
We have Domain Administrators in our domain that reset passwords for user accounts, and the passwords the Administrators set them to are not being enforced follow our default domain password policy. For example, I log on the domain controller, as an administrator
and can reset a password for a user account to be blank.
Is there a reason Domain Administrator password resets for user accounts are not enforced by our default domain password policy? Is there a way to enforce this on password resets by Domain Admins?Do you have fine grant password policy? If not ; by default all the usrs are effected by domain level password policy even domain admins,
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers -
How do I do a hard reset for the MacBook pro?
It cannot boot from the disk it tried booting from.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I'm trying to load everything from my phone to computer so I can reset for phone and start clean and when I plug it in the computer nothing comes up and there is a connection what going on
Is your iPhone not showing up in iTunes sidebar, or is iTunes not just launching automatically?
The things that you can check are:
1) Launch iTunes manually
2) Restart or reset your iPhone (http://support.apple.com/kb/ts3281)
3) Check your cable including disconnecting and reconnecting it on bot the phone end and the computer USB end.
4) Reboot your computer
5) As a last resort, take it to the Apple Store so they can check the hardware -
I do reset for iPad then I lost my location , it can't go back for the right location
When you do a reset for the iPad it will change the sitting and return it to the factory sitting
How can I make my real sitting and location sitting
I tureen on iPad location , but it still have factory sitting
Help
ThanksIt is possible to install AirPort Utility 5.6 on Mountain Lion.
See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
Help with cold reset for M1536dnf
hey i Have a password protected printer too could you help me to get it off. Thanks.
Hi @MPCREATIONS,
I see by your post that you would like the password reset on the printer. I can help you with this.
Please check your private messages for the reset for the printer.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
ADOBE form - page reset for the second SO
Hi all,
Iam working on sales order form ( ADOBE Form). Nneed to display SO header and item details.But it is not for a single SO and it is for multiple SOs.First i need to display one sales order and its items after completing the all items of the first SO , the second SO details should come in the next page. This is fine, i have done this, but for the second SO the page numbers should start from 1. That means the page no has to be reset for each SO change.Suppose assume that, if the first SO is taking 2 pages for printing item details and second SO is taking 3 pages for printing item details then the page nos should follows the below sequence:
First SO : 1 of 2
2 of 2
second SO : 1 of 3
2 of 3
3 of 3.
but it is printing as 1 of 5, 2 of 5 ..... like this. Because we are using the system field for this.Can we reset the page numbers according to the condition?
Regards ,
Vineel.Hi,
One addition to the previous answer. You need to set the Output device in the program itself and the nodialog field of the outputparams should be set to 'X'. For example you can go through the below code.
DATA:
w_formname TYPE fpname,
w_function TYPE funcname.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
DATA:
BEGIN OF fs_orders,
vbeln TYPE vbak-vbeln,
END OF fs_orders,
t_orders LIKE STANDARD TABLE OF fs_orders.
SELECT vbeln
FROM vbak
INTO TABLE t_orders
UP TO 5 ROWS.
CHECK sy-subrc EQ 0.
w_formname = 'YH297_FORM_SALESORDER'.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = w_formname
IMPORTING
e_funcname = w_function
E_INTERFACE_TYPE =
outputparams-dest = 'PDF1'.
outputparams-nodialog = 'X'.
LOOP AT t_orders INTO fs_orders.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_function
EXPORTING
/1bcdwb/docparams =
document = fs_orders-vbeln
IMPORTING
/1BCDWB/FORMOUTPUT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
e_result =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
Regards,
Ram -
Is there a reset for the extender?
is there a reset for the extender? we switched internet modems & it won"t connect to new modem, need ip release
Hi Willobend,
Oh my! Let's get your network extender back to working properly. Which model network extender do you have? What color are the LED lights on the extender?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport -
Identification number for the object type H
Hello:
There is an infotype thats allow me to enter an identification number for the object type external person (H) in the training and event management module (PE)?. I was checking in the configuration and I dont find the solution for this issue.
I ask to myself if is necessary to create one infotype for this purpose?
I will appreciate your colaboration and the answer.
ThanksHi Vijay:
It is something similar to the infotipo 185 of object person type of the module PA. I need an identification document for external person (example: driver license)
Regards
CarlosZ
Maybe you are looking for
-
Open CL no longer working on CC 2014
The option under Preferences -> Performance is greyed out. I tried everything so far: uninstall and reinstall graphics card driver, uninstall and reinstall Photoshop, delete preference files, registry tweak... nothing seems to have worked so far or o
-
Is it possible to add a single file to the Favorites list in a finder window?
I can add a folder, OK, but can't figure out how to add a single file to the favorites list. Is there a way?
-
I can't get java to work with Firefox on my mac with OS 10.6.8. I did everything suggested and still no luck. Java is installed, enabled, and updated. I can't even activate java per site because I don't get the "click here to activate" box for some r
-
JAXB duplicates database records in the output XML file
I am trying to export a database through XML file using JAXB. But i get an XML file having my records with the @XMLElement name i gave it (SMS_Database) and also another one following it with <list/> as the RootElement name. I don't know where it's c
-
Redefined method is not getting triggered while Debugging
Hi Experts, I have a requirement wherein I need to desplay Role information in Header level. To achieve this I have enhanced component ICCMP_BP_DETAIL and Window ICCMP_BP_DETAIL/MoreWindow. I have redefined method IF_BSP_WD_HISTORY_STATE_DESCR~GET_ST