BB Link issue

I always get this error message when trying to sync via cable and BB Link:
"CPreferencesManager: Configuration Value for /Preferences/Account_22_1441794/DevicePin not set in TransConfig.xml for translator RimBB"
What is it?
Solved!
Go to Solution.

Hello zr1100c3,
Welcome to the BlackBerry Support Community.
Thank you for your question regarding the issue you are experiencing when synchronizing using the BlackBerry Link software.
The following article may assist you regarding this issue: http://www.blackberry.com/btsc/KB34453
Let us know if this helps.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Similar Messages

Slow program response, crashes when creating titles and dynamic link issues

Dear reader,
I am now trialling Adobe CC OSX with Premiere Pro and After Effects before deciding to subscribe but I am experiencing a lot of issues while working.
I am now working on an animation, but editing raw mxf files also gives crashes and slow responses/ program refreshes.
1) Slow mouse response
2) Slow program refresh while key framing visuals
3) Rendering in PP is extremely slow when AE is open in the background, when closing AE and re-initiate the render in PP it renders super fast
4) Crashes. When I overlay titles in my time line PP regularly crashes
5) Dynamic Link issues when working combined in AE and PP where file connections in the time line get lost when the AE project has too many sequences
I am curious to find out if other people are also experiencing these issues.
I am indecisive in getting the paid yearly plan or move to FCPX instead? Or should I get a new MacPro and is this model too old?
It worked fine 2 months ago, however I was still working on FCP7. After updating it is really bad working with it...
My system consist of:
MacPro mid-2010
OSX 10.9.5 (13F34) (new installation)
2x2,66Ghz 6-core Intel Xeon
24GB DDR3 ECC
Nvidia Quadro K5000, 4GB
2x PCIe SSD 1TB
2x HDD 3TB
2x HDD 2TB
Feedback is much appreciated! Best regards, Alexander

this does work for basic colour correction but not when trying to grade an entire suqence to achieve a specific style, applying a vingette or certain effects have to be done in after effects.
I want to try and get my whole sequence into after effects but preserve the edits and effects added in permier pro, is there any way to do this?
rich

URL link issue

Hi
I am trying to create a link in my project to one of our
company intranet pages. I am using a click box and the URL - it
works fine in the Preview from Slide or next 5 slides, but when I
Preview in Web Browser it doesn't connect. Any suggestions as to
what might be the cause?
Thanks
Alex

Hi Alex
Hmmm, before investigating too deeply, I'm seeing some
familiarity here. For starters, the first link is to a .PDF. It's
been my experience that links to .PDF and Word .DOC files is "iffy"
at best. If you truly copied and pasted the links, I'd first try
removing the %20 from that first link. That's something the browser
normally inserts for a space. So instead of:
http://wlgweb/Corporat/HumanResources/Staff%20Conduct/EmailInternetUsagePolicy.pdf
Change it to read:
http://wlgweb/Corporat/HumanResources/Staff
Conduct/EmailInternetUsagePolicy.pdf
This may help and it may just be twisting in the wind. But
I'd try that first. I've often seen linking issues arise from that
silly %20. If possible, try to avoid that. I'm guessing here that
it may not be possible to control in your case as someone else may
be in control of those names. I've personally always opted to
either use a mix of upper/lower case names ( StaffConduct ) or
substitution of an underscore where spaces would normally occur (
Staff_Conduct ).
Other wierdness I've seen when linking to .PDF content:
* I personally had a different PDF reader (Foxit) installed
as my default. When Foxit was my default reader, PDF links refused
to open.
* I think this one is IE specific, but I've also seen it
where if I have a .PDF in the same folder and open that way, even
though the address is totally correct, the first time through, the
link fails. With the totally correct address showing in the address
bar. I simply refresh the page and bingo, the PDF shows! Go figure.
I really don't believe that this one is related to Captivate and
the way it calls the links. My gut tells me it's an IE thing. But I
have nothing to back me up on this.
I'm not sure what to say or suggest for the second link. I
tested it myself and it doesn't work, which tells me that either
the link is simply incorrect, or possibly it's located on an
intranet site.
Sincerely... Rick

OCCI linking issue on HUPX11

Hello,
I am trying to make an OCCI9.2 sample application (occidesc) getting linking issue. I am don't think I have all the required Oracle library in my linking options. What am I missing?
My development environment: HUPX11, g++3.3.2, OCCI 9.2
===============================================
Link flags:
LDFLAGS = -L$(ORACLE_HOME)/lib32 \
-L$(ORACLE_HOME)/rdbms/lib32 \
-locci -locci9 -lclntsh \
`cat /u01/home/oracle/product/920/lib32/sysliblist`
========================================================
Linker errors:
/usr/ccs/bin/ld: Unsatisfied symbols:
typeinfo for oracle::occi::SQLException(first referenced in occidesc.o) (data)
oracle::occi::SQLException::SQLException[in-charge](oracle::occi::SQLException const&)(first referenced in occidesc.o) (code)
oracle::occi::Environment::createEnvironment(oracle::occi::Environment::Mode, void*, void* (*)(void*, unsigned long), void* (*)(void*, void*, unsigned long), void (*)(void*, void*))(first referenced in occidesc.o) (code)
oracle::occi::MetaData::getBoolean(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)
oracle::occi::MetaData::operator=(oracle::occi::MetaData const&)(first referenced in occidesc.o) (code)
oracle::occi::MetaData::getUInt(oracle::occi::MetaData::AttrId) const(first referenced in occidesc.o) (code)

I can't find any documentation referencing supported compiler for OCCI. Do you know of any from Oracle that support my environment?
Environment:
Oracle 9.2
HPUX B.11.00 A
Thanks,
Minh

Secure link issue

I cannot update my I tunes. I get a secure link issue when I run a diagnostic check. This is using windows xp system

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Autocomplete and linking issues with gchat on apple messages

So I'm having a couple related(ish) problems with apple messages and gchat/hangouts/whatever it's called these days and imessage on my laptop:
1) Gchat contacts sometimes do and sometimes don't autocomplete when i cmd+n for a new message and then start typing in the 'send to' field. this occurs irrespective of whether i try to start a jabber conversation via typing their email or via typing their name. I've noticed a couple of semi-consistent factors that seem to be impacting it, at least sometimes, but can't pinpoint anything entirely consistent:
     -It seems to be more problematic with contacts that I have their (google) email address on their contacts card in my icloud account on my actual computer/iphone (as opposed to not having them linked to a contact, and them being merely listed on my gchat friends list by virtue of being imported when i created the account)
     -It seems to be more problematic with buddies that i have had more recent contact with, so that their existing conversation is closer to the top of the messages window (and plus, even this isn't entirely consistent - sometimes it lets me type and find their jabber account even if i chatted yesterday and it's second or third on the list, other times it just returns no results in the address field, and other times (when they're a contact with email address as well as phone number) it only gives me their imessage account but their jabber doesn't show up and i have to go to my buddy list to find them)
Any thoughts? It's sometimes easier to just do cmd+n and type a friend's name even if i have an existing conversation with them relatively top to the close of the list, than manually finding them in the list or looking at the buddy list or using the search bar. cmd+n typically works at least with imessage conversations, and sometimes even with jabber accounts/gchat, so it doesn't seem like this is merely a feature that doesn't exist.
2) This might be less of a bug and more of a feature, but i'm wondering if there's a way to deactivate it. A lot of my friends have both imessages and gchat, and i have their google email and phone number on their contact card. in this case, apple messages, seemingly arbitrarily, alternates back and forth betweeen gchatting them and imessaging them in the same conversation. it doesn't always correspond to their away/available status on gchat, and even when it does correspond, i'd still prefer to be able to manually override to send an imessage even if they are available on gchat, I'd prefer to just have separate conversations going for imessage and gchat (because a lot of my friends just never look at one or the other depending on whether they are or arent near their computer, so i need to be able to control where the message goes). I do have a separate jabber conversation with John Smith from their imessage, but within the imessage conversation it still sometimes switches to jabber. It seems like this only happens for contacts that have both email and imessaage on their vcard, but i'd prefer not to delete the email address from their vcard just to resolve this issue, since the email address on contact comes in handy for purposes other than gchat. is there any workaround/way to disable this auto-switching between imessage and gchat accounts in the same conversation, while keeping contacts' email and phone number linked on their vcard?
3) Some, but not all, of my android friends show up as having imessage when i type their name to contact via gchat. sometimes it says imessages for their phone number, and sometimes instead for their gmail (or both). With respect to the issue when it happens in phone number form: i've checked their contact cards and their phone number is just listed as mobile (not iphone or anything, though i'm unsure if the category of phone number actually tells the phone whether they have imessage, or if it recognizes (in this case, incorrectly) on its own). Of course the imessage won't actually send, but it's pretty annoying (especially in light of the problem from #1). Is their any way to tell messages that this person doesn't have imessage so it stops saying they do?
Couldn't decide whether to post these separately or together, but since they may or may not be related i opted for the latter. sorry for the length. searched for all 3 and didn't find anything quite on point.
macbook pro, mid-2010, 15"
Mavericks 10.9.2
messages v8.0

Hi,
Re 1)
If a Buddy (Google, AIM or Yahoo) is in the Buddy list as just the ID or Screen Name then broadly speaking they are not in your Contacts list.
As such they will not show a "Real Name".
However any Buddy can be added to the Contacts List even if you don't add a "Real Name"
This in itself can also cause issues as the Contacts app does not create what it sees as Duplicate cards.
i.e. you cannot create two cards with the name John Smith.
It is easier if the ID/Screen Name becomes the "Real Name".
I have three Macs
On each the My Card for myself reflects the Computer it is from and those Cards are synced on my iMac.
Some of the various Jabber and AIM Screen Names are linked to the particular computers.
That means if I type "ra" as the start of my Name in the "to" spot I get this:-
First is a national breakdown service for helping out with cars (as opposed to any other breakdown)
The next is a Buddy that I have hidden.
It lists Apple ID and telephone numbers that it thinks are iMessages compatible (it thinks all numbers are valid) liked to be G4 tower's card.
It continues listing AIM, Jabber, Yahoo and other iMessages accounts as well as the Bonjour contact details.
As you can see some at the bottom are IDs and Screen Names that are not associated with any of the Address Cards.
In these cases my name from part of the ID so "ra" picks then up.
As you can see you should get AIM, Jabber (Google), iMessages and Yahoo account indicated.
That should then lead to 2)
Once in the conversation you can use the "To" spot to change which ID you are calling and therefore effectively change which service you are using.
In this Pic I have chosen to call Myself (easy with multiple accounts)
My iMac My Card has no jabber account listed so you only see iMessages and AIM option listed.
I can "call" my main AIM name (ralphjohnsr) from the other three Accounts linked to this Card.
From your end it may look like a random switch but in fact is most likely from an incoming change by the Buddy/Contact.
You can make the change by using the "To" spot and a drop down
The centralised messages in the chat should tell you of Changes as will the ID in the text field before typing
Re 3)
It will depend on what their Apple ID is.
Some have had @mac.com names for a long time and linked them to MobileMe than more recently iCloud.
Some linked their @me.com names form MobileMe to iCloud at the Change.
Most recently iCloud IDs have been given @iCloud.com emails from the start.
However any email can be used as an Apple ID.
The pic above has my Apple ID partially hidden for that lower iMessages info across the center.
You may find that some people are using their Google ID as their Apple ID AND also using it as both the iMessages registered name and the Google ID in the Messages app.
Lets explain this another way.
When iChat 1 came out Apple joined the AIM service with it (it did AIM and Bonjour which was then called Rendezvous)
At that time Apple entered in to an agreement with AIM that any Apple Issued ID would be a valid AIM Screen Name.
At that time the Apple Service was .Mac and @mac.com IDs were being issued as paid for accounts, Trial Accounts and after while Lapsed paid for accounts.
These all worked as iChat/AIM Screen Names.
Then Apple changed to MobileMe and issued @me.com IDs
The trials only lated until you ended them and the IDs no longer worked in iChat after that as valid AIM Screen Names and nor did lapsed Paid For accounts.
More recently Apple have stopped a paid for Service and moved to iCloud.
At the change you could link Any Apple ID to iCloud and you got an @me.com ID from the iCloud server (it could be the same as the on MobileMe but did seem to be "separate").
Later these became @iCloud.com IDs (Some people have both under iCloud and in some cases linking @mac.com names to MobileMe @me.com accounts for email still continues).
To be clear you could link Any existing email ID to iCloud such as Google ID.
But broadly I am speaking of gaining various Apple Issued IDs over time that may or may not be linked to one account.
These Apple Issued IDs works as Valid AIM Screen Names in Messages. (the iCloud issued ones don't work in iChat 5 or earlier though).
I linked an external to Apple dial-up Email that has been my long time Apple ID to iCloud and got an @me.com ID at first and later an @icloud.com one as well.
I can use these two separately in Messages as Valid AIM names.
Someone using their Google ID as their Apple ID could use it as the iMessages registered Name AND as the GoogleTalk/Jabber entry as well.
This might explain why it looks like they are swapping about.
There can be one other explanation and that is dependent on where they are logged in.
Obviously a GoogleTalk user can log in to the Google web Mail page and use Talk there.
Although I don't use Google+ I presume there is a similar web page to chat from there.
This would limit them to being "On Google" rather than iMessages when they sent a messages to you.
Re GoogleTalk
Obviously Android is Google.
The Account settings at Google incudes the "products" you can link and use from your Account.
Previously with a Google Mail Account that included enabling "Talk" which then allowed you to chat from the Web Mail Page login (or your chosen Jabber able app)
Now Google use Google+ and this seems to give you automatic access to "Talk" to the extent it is no longer something you have to Activate.
I am wondering if using a Android phone is linked to having a Google+ account and that the phone number can be part of that ID set up (similar to iMessages and iPhone Numbers).
If it does it would then depend if the phone is linked to both the Number and the Google ID as to what they can login as in certain situations.
I am not sure I have covered everything but I think I have covered most things.
From what you post I am not sure that there is an issue or not although I have posted what is normal and expected I think there are some fringe things that are an issue.
9:46 pm      Tuesday; April 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

WebI report on SAP Mobile BI for iOS that contains a chart with element linking issue

Hi gurus. I have the following issue:
I have element linking based filters on my chart # 1 to filter values on chart # 2. It worked fine on Ipad. And it worked fine on BI Launch Pad.
But after some time I check my webi report and it stopped working on IPAD.
Filters are not shown on the graph.
However it still works fine on BI LaunchPad
Have you faced this issue before?
Using: BI mobile 5.1.12
Before, example:
After some time, I opened sap mobile and it is not showing up the filter anymore
Now: We upgraded to SAP Bi Mobile 6.0.8.12 but issue persists.
Could you do the test?
Steps to reproduce:
Create a simple Webi report with a table.
Copy that table and paste it to the report.
Turn the original table into a column chart
Add element linking from the chart to table. (When user filters on the chart it should change the table as well)
Test that the element link works in BI LaunchPad.
Save the report to the Mobile category and test on iPad.
Open report on iPad
Tap chart bars. Yellow filters, that are supposed to show up, are not displayed.

Hi Erika,
Is this report element linking defined as 'All Objects' or 'Single Object' in Webi.
I ask this that report element linking on 'All Objects' is not supported yet. This support is expected to come in later releases.
However, if this is single object then it should be working. Can you verify this on latest app store build and confirm. If still it does not work for you, then please raise a support ticket for the same.
Regards,
Ashutosh

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

Report Links issue in obiee 11g

hi all,
we are using obiee 11.1.1.5 version. we are facing issue with report links. when there is no data in the dashboard, the dashboard is displaying only Refresh button, it is not displaying Export and Print(even though we customized the report links to display Refresh, Export, Print). when there is data in the dashboard it is displaying Refresh, Export and Print as expected. Is this product limitation or a bug in obiee.

You need to repost this in the OBI-EE forum.

Spark skins, modules and custom themes: linking issues?

I've read some other threads on this topic that were related to the pre-release versions, but I can't get a complete answer get. I also opened an issue in the bug tracker (https://bugs.adobe.com/jira/browse/SDK-30748), but I'm also posting here, hoping to get some help.
Basically, I have a bunch of skin classes for the standard Spark controls (e.g. s:Button), as well as other skin classes for my custom SkinnableComponent objects. I need to reuse those skins in many projects, so I created a theme: I put in a Flex Library Project all my skin classes, all related graphical assets, and a defaults.css stylesheet that associates each component with its correct skinClass.
Now, in my modular application project, what is the correct method to link this compiled theme SWC? I tried different ways, and found some issue for each one:
In <app>-config.xml, using the <theme> compiler option: this way, modules don't pick up the skinClass correctly (default components use the standard Spark skin, and for custom components I get many skinNotFound errors).. its a pity, I like this method because command-line invocations of MXMLC (build scripts) automatically apply the settings in the config.xml file, while I have to manually keep in sync any additional compiler argument.
In <app>-config.xml, using the <theme> compiler option and add -compiler.isolated-styles=false: seems to work, but not always.. moreover, the option must be put in additional compiler argument, and not in <app>-config.xml, to have effect... I understand that the config.xml file, in a modular application, is only applied to the main application (or that it must replicated with correct name for each module)?
In additional compiler arguments, using the theme+= option.. these arguments should be used also for modules compilation, and this seems the most effective solution at the moment (swf size of compiled modules has slightly increased), but skinNotFound errors still happens sometimes, usually going away after a clean build.. maybe this has something with the incremental build performed by Flash Builder and/or optimization of modules?
Right now, I've tried adding also -keep-all-type-selectors in the compiler arguments to see how it goes...
Is my scenario supported by Flex 4? How should I setup my environment? I read how to create custom themes in the official documentation (http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f85.html) and a specific help section exists about using styles with modules (http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-799a.html#WSda 78ed3a750d6b8f1b97f82d12508050aa0-8000), but it only cover simple style sheets, no specific information about compiled themes and the suggested linking strategy.
I'm using Flash Builder 4.5.1 and compiling with Flex SDK 4.5.0 (both application and theme), the project use some Halo components (e.g. DateField) but almost all components are Spark, and I use Spark component for <s:Application> and <s:Module>. Modules are optimized for the main application, and are loaded using the ModuleManager.
Thanks in advance for any help.
Cosma Colanicchia

I'm not sure Spark components will work if the compatibility mode is set to
3.

Footer & Text Link Issue

Http://Infinite8imaging.com
On some pages the green footer bar i created is being forced off the page (pushed down), I am not sure why. it doesnt look like his in preview mode or when i "preview page in browser", only ater i export to html and upload. Please see link below for examples
http://www.infinite8imaging.com/photos.html
Edit: Seems to only happen in internet Explorer, why? can i fix this?
Also, all text links are leading to same place, I double checked the Muse file and all links are aiming correctly to different pages. just when its exported, they all lead to my business card page? See links below for examples:
http://infinite8imaging.com/cards.html
http://www.infinite8imaging.com/covers.html
http://www.infinite8imaging.com/banners.html
Is anyone else having these issues?..its times like this where i wish muse allowed an open html edit mode.
I also get this glitch sometimes, i was actually moving the bottom of the page down more to see if it would correct the footer problem on this page, and it seems to have.. but now the page itself is cut off.
http://infinite8imaging.com/retouching.html
Thanks in advance.

You have some problems with your code and they are showing up in Internet Exploiter and Firefox because they are less tolerant of those errors.
Your code suggests you need to understand that an ID happens once on a page. You can re-use a Class.
IDs are set up in your CSS with a hash:
#header { }
Classes are set up in your CSS with a dot:
.left_content { }
Use the W3C Validator to check your work, fix the problems and you may find that everything looks just fine in Firefox nad Internet Exploder.

Command Link Issue

Hi,
I am using Jdevloper 11g.
I am facing issue with the following code.
In brief - I am taking Value from session and want to display those values as Command link on jspx, in af:forEach.
When I bind that Command Link with Managed Bean that time it displays Last Element only (Code given below).
When I removed Binding ( binding="#{ManagedBean.schemeName}") at that time it displays all the values on page as Command Link.
Binding is required for my app to find Link text. Is there any alternative?
<af:forEach var="item"    items="#{sessionScope.SchemeList}">
<af:commandLink text="#{item.schemeName}"
                                                id="cb14" immediate="true" partialSubmit="true"
                                                binding="#{ManagedBean.schemeName}"
                                                 inlineStyle="#{item.eligibilStatus eq 'Y' ? 'color:black' : 'color:Red'}"
                                              actionListener="#{ManagedBean.schemeChangeListener}"/>
</af:forEach>Thank You,
Regards,
Dilkhush

Hello,
Thank you,
The solution you had given that is working.
Now my issue is I have created Programmatically VO.
I refereed following link to create Programmatically VO
http://adfpractice-fedor.blogspot.com/2011/01/adf-bc-programmatically-populated-vo.html
but My issue is how to set VOs Bind Variable Value.
Because have to send that value from the bean.
In above link they took two inputText to set Bind Variable value but in my condition I cannot take InputText.
I am setting that value in my Managed bean as shown below.
public void schemeChangeListener(ActionEvent actionEvent) {
      OperationBinding opBinding =
          CommonUtil.getOperationBinding("#{bindings}",
                                         "initParamValues");
      opBinding.getParamsMap().put("custID", customerID.getValue().toString());
      opBinding.getParamsMap().put("accountType", (CommonUtil.evaluateEL("#{bindings.ADAccountType.attributeValue}")).toString());
      opBinding.getParamsMap().put("productID", (CommonUtil.evaluateEL("#{bindings.DMAProductId.attributeValue}")).toString());
      opBinding.getParamsMap().put("entityID", homeEntityID);
      opBinding.getParamsMap().put("schemeCode", linkText);
      opBinding.execute();
}and I have taken that VO as Table on jspx page.
Issue is before going to bean method it goes to View object and show NullPointerException because the values never get set.
The above code is called when the commandLink is clicked code given below.
<af:commandLink text="#{item.schemeName}"
                                              id="sName" immediate="true" partialSubmit="true"
                                              inlineStyle="#{item.eligibilStatus eq 'Y' ? 'color:black' : 'color:Red'}"
                                              actionListener="#{MakBean.schemeChangeListener}"/>is there any solution how can I set the Bind Variable value from bean and get Expected result in table.
Thank you
Regards,
Dilkhush

Preview Pane and broken link issues in CS2 for Mac. Please help!

I posted this a few days ago - but would love to have some insight on how we can resolve this issue
When I am working on html documents, both old and new, I have lost all of the 'preview pane' buttons.
I can still see and have access to the layout and source panes, but the two preview (pdf and regular) are missing.
In the body of the editor all of the images that were there now show just a broken link image (but when you save and go to view the file in a browser all changes and updates are there. The source shows all of the right info and links
Also when you place a new image - the image icon doesn't show the image or even change to the proper size that the image is. You have to do that manually and then still only shows a broken icon in the new size.
Has anyone seen this before? Did I accidentally altered a mode in GoLive....is there a way to fix it?
Thanks!!!

When you have ADE (digital editions) open with "bookshelves" page with a "Getting Started with Adobe Digital Editions" booklet in it,
enter cmd-shift-U, or menu/Help/Authorize Computer.
That will ask for your Adobe ID and password and authorize the computer.
Once that has been done you shouldn't need to do it again.
Sometimes you do need to if things go wrong, but you certainly shouldn't have to do it at all regularly.
When that has been done, plug in the Kobo; it should show up in the left pane of ADE.
Use "menu/Help/Authorize Device" and that will authorize your Kobo with the Adobe ID from the Mac.
You can then copy books by drag-dropping onto the Kobo within ADE

InDesign Placed Text Linking Issue

Hi - I've just recently updated to CS6 and am having an issue with linking placed text files.
When I place the Word Doc into the InDesign file initially (not in position), the link to the original document is present in the 'Links' window as expected. However, I need to transfer this text into another text box on the page and of course when I do so the link is removed.
Therefore, I tried placing the Word Doc directly onto the page in position (I have an autoflow setup that I need the text to run through) however when I do this no link appears in the window. To clarify, I have three separate text boxes setup on my master page that I need this linked text to flow through.
Any suggestions how to solve this? I have run through the preferences and ensured everything is as it should be.
Thanks!

Sorry for the double post! I've solved it - for anyone else in the same boat, I created a Master Page with the linked text flowed through the 3 separate text boxes. I then selected to override the master objects on the realtime pages and relinked to different documents from there as needed.

Crystal Reports 8.5 Subreport Linking issue

Post Author: Evans
CA Forum: General
Product: Crystal Reports 8.5
Version: 8.5.0.217 and 8.5.3.975 (tried both)
Patches: Service Pack 3
OS: Win XP pro
Database: SQL 2k
I have a report with 3 sub-reports. The main report has no data source, all the data is coming from the 3 sub-reports. The main report asks for 4 parameters and these are passed to the sub-reports. That part is going ok.
The issue is that I also need to pass in a static value for the last parameter of each of the sub reports. Each of the sub reports is pulling data from the same stored procedure where the last parameter is a flag to tell the stored procedure which portion of the data it needs. I created 3 formulas with the values of 1.00, 2.00, and 3.00 and I was passing these to the sub-reports. The issue Iu2019m running into is that CR isnu2019t attempting to run the stored procedure if I link in those formula values. Itu2019s not that CR is trying to run the stored procedure and failing, itu2019s not even trying. If I set up a parameter and link it then it runs, or if I donu2019t link anything to the last parameter of the sub-report it will run (in both cases it will prompt the user for the last parameter). Because of the simplicity of what Iu2019m trying to do it feels like Iu2019m running into a bug. Any help would be appreciated.

Post Author: Evans
CA Forum: General
Originally the stored procedure had the last parameter as an integer. I tried everything with the formulas, CDBL(1.00) ToNumber(1.00) 1.00 1 hoping it just wasn't recognizing that the value needed to be a number but nothing worked. I changed the stored procedure to require a VARCHAR for the last parameter, updated the report and it worked for me.

Acrobat 9 - hyper link issue and print in larger font

I am using Acrobat 9 and have two issues :
When I try to convert a web page to pdf file i.e. through the print command in FF, the text links are there in the new file but without the underlying hyper links ?
How can I print the files with a larger font. It is okay for seeing it on monitor but too small for me when I print.
thanks.

Do as AbhigyanModi suggests or use the Adobe Acrobat plugin that should be in your web browser if you're using Internet Explorer. This happened because you "printed" to convet to PDF. You have to use either AbhigyanModi method or use the Internet Explorer plugin to save active hyperlinks.
In terms of the font size -- You can set up the web capture preferences first. Explore the menu that AbhigyanModi suggests or use the built in help. It's there for a reason.

BB Link issue

Similar Messages

Maybe you are looking for